is someone can arrange me FFU file for HTC hd7
As i think this is the only option left for me to downgrade
bootloader of my phone.. because goldcard method failed
for me and there is only one line written in my bootloader screeen..
thx
Aakash
soluation
aakashvijay said:
is someone can arrange me FFU file for HTC hd7
As i think this is the only option left for me to downgrade
bootloader of my phone.. because goldcard method failed
for me and there is only one line written in my bootloader screeen..
thx
Aakash
Click to expand...
Click to collapse
Just go for hard reaset.
I'm also looking for FFU for HTC HD7, because PVK are missing in my HD7. Does anyone know if it's available somewhere?
Thanks!
Solution?
aakashvijay said:
is someone can arrange me FFU file for HTC hd7
As i think this is the only option left for me to downgrade
bootloader of my phone.. because goldcard method failed
for me and there is only one line written in my bootloader screeen..
thx
Aakash
Click to expand...
Click to collapse
I also had problem with the gold card method and my HD7 T Mobile, the solution was that the camera button not always gets pushed well, a half disassembly pushing the button, putting the battery and starting in usb loder mode worked very well, also don't forget to use a 1GB microsd, mine was a Sandisk, the process last about 10-15 minutes... depending on what SCHUIMG.nbh (ROM) file you use, I used an European NoDo ROM, and is better than before.
I used the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE.exe (you can find the file in the Shipped Roms post), the method worked well and is safe to recover if something goes wrong (bad flashing, power failure, etc.)
Take a look at this thread and ask the OP if he can build an FFU file for the HD7 for you.
http://forum.xda-developers.com/showthread.php?t=1451214
xdrc45 said:
Take a look at this thread and ask the OP if he can build an FFU file for the HD7 for you.
http://forum.xda-developers.com/showthread.php?t=1451214
Click to expand...
Click to collapse
Yeah well, but where to find a dump from DPP partition? Or how to extract it from .BIN Dump and prepare it as flash?
crazy5252 said:
Thank you for sharing. labor health
Click to expand...
Click to collapse
Why do you post this same message in so many threads? What does it mean? It's freaking me out a little bit to be honest... :-\
Related
While trying to update my MDA Vario with the new AKU 2 ROM of T-Mobile the RUU puts the MDA in bootloader. Then Windows notifies me of a new unknown USB device and the update utility gives me an communication error with error code [260] - upgrade failed. :shock:
1) How to solve this problem as this would make me or
2) Is it possible for someone to make a complete backup on a mini SD card of his HTC Wizard? From what I have read on Internet this can be written to a file. When posted on the XDA ftp I can write this file back to a mini SD card and restore a original ROM (for this I need a short tutorial).
option 2 assumes that the problem is related to the ROM. I super CID and SIM unlocked using the well known tools. Maybe this has gone wrong at some point :?: ?.
I'm having the same problem moving up to a custom 2.26. Did you ever find a solution.
Thanks,
Jeff
dont qoute me on this.. but i believe its an issue with the update utility... hopefully someone else can confirm or deny this..
but you can try this one:
i dont know how much either of you know so i will try some directions with this...
take my rar file, extract them to a folder, lets use c:\rom for an example
if you rom you have is in an *.exe format then use winrar to extract the rom to a folder then take the nk.nbf file and copy it to c:\rom and then run the update utility
if your rom is already in a rar or zip file then just extract the nk.nbf file to the c:\rom folder and then run the update utility
hope that helps
shogunmark said:
dont qoute me on this.. but i believe its an issue with the update utility... hopefully someone else can confirm or deny this..
but you can try this one:
Click to expand...
Click to collapse
I really appreciate your help, but before I risk bricking my phone, could you tell you tell me how this differs from the ROMUpdateUtility_Wizard_NoID.exe and RUU*.* that are part of the custom ROM update package I already have?
Thanks,
Jeff
datawrhsdoc said:
shogunmark said:
dont qoute me on this.. but i believe its an issue with the update utility... hopefully someone else can confirm or deny this..
but you can try this one:
Click to expand...
Click to collapse
I really appreciate your help, but before I risk bricking my phone, could you tell you tell me how this differs from the ROMUpdateUtility_Wizard_NoID.exe and RUU*.* that are part of the custom ROM update package I already have?
Thanks,
Jeff
Click to expand...
Click to collapse
the custom rom that you have, does it have the NoID update utility already?
ANSWER
I spent a few hours fiddling with this, and it turns out that my problem was that I have a miniSD installed. Make sure you pop your miniSD out of the slot before you begin the update, and it should work.
Re: ANSWER
doomcomplex said:
I spent a few hours fiddling with this, and it turns out that my problem was that I have a miniSD installed. Make sure you pop your miniSD out of the slot before you begin the update, and it should work.
Click to expand...
Click to collapse
WTF that is WEIRD
i have flashed many roms and never had an issue with the sd card being in... but will definitely file that in the back of my brain in case i ever run into the same issue
shogunmark said:
the custom rom that you have, does it have the NoID update utility already?
Click to expand...
Click to collapse
Yes, it does. Oh, I also tried this without the MiniSD in the device (a known but really strange problem). Still getting the error.
Error 260 Finally Gone!!!
Well, just for the heck of it, I tried xelencin's 2.26 ROM update from another PC...and it succeeded.
Clearly, it is a new issue related to my laptop but it is probably going to quite a bit of trouble to track down.
Thanks everyone,
Jeff
Re: Answer
doomcomplex said:
I spent a few hours fiddling with this, and it turns out that my problem was that I have a miniSD installed. Make sure you pop your miniSD out of the slot before you begin the update, and it should work.
Click to expand...
Click to collapse
WTF!!! I had the exact same problem. Popped out the Mini-SD Card and voila! The Bootloader started!
Thanks man!!
Ty man ... MS card out and it is working .... yea
i cant get this to work PDA PHONE ROM UPDATER, send a black screen to s200 and then gives error 260
hello there
i´m searching for the DIAG Tools from htc for the SD Card . The are called
RAPHIMG.NBH or RAPHDIAG.NBH i think.
But I´m thinking that RAPHDIAG.NBH is the right name .......
Have anyone these files ?
Hi, pm me.
v3_player said:
hello there
i´m searching for the DIAG Tools from htc for the SD Card . The are called
RAPHIMG.NBH or RAPHDIAG.NBH i think.
But I´m thinking that RAPHDIAG.NBH is the right name .......
Have anyone these files ?
Click to expand...
Click to collapse
To my knowledge and after some research these tools are not available. Unless they are leaked by a HTC tech they never will be.
Or I could be wrong
FYI this post would have best been made and answered in the raphael software forum.
I got some many HTC exe diag files. PM and It's your's
aruppenthal said:
To my knowledge and after some research these tools are not available. Unless they are leaked by a HTC tech they never will be.
Or I could be wrong
FYI this post would have best been made and answered in the raphael software forum.
Click to expand...
Click to collapse
Agreed, and done.
Thread closed - Thx a lot i got it ;-)
v3_player said:
Thread closed - Thx a lot i got it ;-)
Click to expand...
Click to collapse
Would you share it with us?
From what I remember that's how you would upgrade your SPL via flashing even if you have HardSPL flashed.
Although I could be mistaken.
I would need the RAPHDIAG.NBH aswell, can anyone provide it?
[EDIT]
Thanks to Da_G, I got it. =)
Here. I'll post the RAPHDIAG.nbh since so many people PM'd me already for it lol.
[LINK]
n00b q
So I've seen this raphdiag mentioned a few times on the site - can someone with more experience go through exactly what this will do for you? How to install/use if needed? (screenshots etc?)
mlacomb said:
So I've seen this raphdiag mentioned a few times on the site - can someone with more experience go through exactly what this will do for you? How to install/use if needed? (screenshots etc?)
Click to expand...
Click to collapse
No screenshots since this is in bootloader mode But it is exactly what it says it is. Diagnostics tools. IT can format FAT, Debug (I think?), etc. Just put it in your storage card and boot into bootloader mode (Power + Vol Down + Stylus reset).
ok so i put it in the storage card n then bootloader but nuthin happs...wut am i doing wrong cuz im sure its user error
datt1x said:
ok so i put it in the storage card n then bootloader but nuthin happs...wut am i doing wrong cuz im sure its user error
Click to expand...
Click to collapse
Re-download. It may be corrupt.
looking for rapkdiag.nbh
i am wlinsong ,a xda's Moderator,
is there someone have rapkdiag.nbh-for RAPHAEL#K Repair Center or S58
,can u give me ,thank you much
datt1x said:
ok so i put it in the storage card n then bootloader but nuthin happs...wut am i doing wrong cuz im sure its user error
Click to expand...
Click to collapse
I'm pretty sure there can't be anything else on the SD card. Just the RAPHDIAG.nbh file.
Eric03 said:
I'm pretty sure there can't be anything else on the SD card. Just the RAPHDIAG.nbh file.
Click to expand...
Click to collapse
Not true. I flash and use raphdiag all the time on my regular microSD card with everything else on it.
So is this the way to flash rom even with locked SPL? I didnt see the clarification above, if so, how can I do that?
Also, would anyone here know how I can restore stock SPL without activesync?
I just found this on PPCGeeks: Link
Does the RUU program give you the error?? If so that was what happened with me when trying to run the manual HardSPL off the SD card. If it's stuck in the Tri-Colored screen try resetting the phone with your stylus. Try hard resetting your phone (for some reason the manual method worked for me after that) (Hold power, volume down, center d-pad button, and reset)
Here's what I did:
* Hard Reset Phone
* Download Raphael_CDMA_HSPL_037.exe and SSPLManual_Raphael.zip
* Transfer Raphael_CDMA... to an empty folder on the desktop of your VM
* Run Raphael_CDMA (but don't use it)
* Now look in the above folder and find RUU_Signed.nbh and move to the root of your SD card
* Use a file utility on your phone to rename RUU_Signed.nbh to RAPHIMG.nbh
* Put SSPLManual on your SD card and run the program
* It should now flash your SPL
* To test boot into bootloader and it should say 0.37.CMONEX
* Delete RAPHIMG.nbh
* Now to flash a custom ROM download one and find the file RUU_Signed.nbh... move it to the root of the SD card... rename it to RAPHIMG.nbh (using the phone) and enter the bootloader (hold power, volume down, and push the reset button)... it should now flash the ROM
Hope this helps... I know it can be frustrating when you don't want to screw anything up!
Click to expand...
Click to collapse
That seems a bit confusing, does this utility help?
FOLLOW THIS AS IT IS THEN U BE UP AND RUNNING WITH "WP7 NoDo Update" IN NO TIME:::
1> Look for a file called RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
2> Look for this file called RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
3> Download the ModelID.fig file from this link (http://rapidshare.com/files/451734900/ModelID.fig)
4> Extract the RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar (That u downloaded to a folder using 7-zip or whatever (I use 7-Zip 9.17 BETA-2010-10-04))
5> Extract the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE (That u downloaded to a folder using 7-zip or whatever (I use 7-Zip 9.17 BETA-2010-10-04))
6> Now paste the ModelID.fig that u download from the rapidshare link into the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE folder that u extracted the files to
7> Now put your phone in bootloader mode, plug it to your computer and be very sure that it shows u or displays USB
8> Open the RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar folder and run ROMUpdateUtility file, it MUST be the exe file NOT the cfg file (Confirm this very well)
9> Follow the on screen prompt
10 When it is all done to 100% your phone will be in bootloader but your computer will show ERROR [270]: UPDATE ERROR
11> From your computer click on Exit
12> Open the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE folder and run ROMUpdateUtility file, it MUST be the exe file NOT the cfg file (Confirm this very well)
13> Follow the on screen prompt as well
14> Now just sit and relax and watch it counting up to 100% (lol)
15> Your phone will then restart and Hurray U are done
16> Now from here u should know what to do
Dont 4get to leave your COMMENT(S) and say THANKS and also click on the THANKS - Afterall it cost u nothing
PEACE!
PEACE!!
PEACE!!!
anyone try this out yet?
Thanks for the useful tutorial.
second_east said:
Thanks for the useful tutorial.
Click to expand...
Click to collapse
Glad I Put Smile On Ya Face
PEACE!!!
pinoypayter said:
anyone try this out yet?
Click to expand...
Click to collapse
Here is the start of those that tried it
http://forum.xda-developers.com/showthread.php?t=984902&page=15
And read page 16 as well and keep going on and on
After that go read the page 33, as to the last post i posted there
PEACE!!!
I've learned about this method after I flashed the original NoDo ROM. And now I can't get pass thru it anymore. I mean, whenever I try to flash other ROMs I'm always stuck with "NO VENDER ID".
Another thing, if ever I get pass thru this, how do I extract the NoDo ROM since its an exe file?
I have the NoDo ROM right now.
I hope I'm making any sense.
PS
The tutorial is great by the way.
worked on mine first time
thanks for sharing
biernes_atrece said:
I've learned about this method after I flashed the original NoDo ROM. And now I can't get pass thru it anymore. I mean, whenever I try to flash other ROMs I'm always stuck with "NO VENDER ID".
Another thing, if ever I get pass thru this, how do I extract the NoDo ROM since its an exe file?
I have the NoDo ROM right now.
I hope I'm making any sense.
PS
The tutorial is great by the way.
Click to expand...
Click to collapse
Please, try to read that again slowly then will see what i said u should use to extract.
Thanks
PEACE!!!
ClashOfThe said:
worked on mine first time
thanks for sharing
Click to expand...
Click to collapse
Glad I Put Smile On Ya Face
PEACE!!!
Does the process described above work on a US version of the T-Mobile HD7?
rdilallo said:
Does the process described above work on a US version of the T-Mobile HD7?
Click to expand...
Click to collapse
I dont know cuz I am in the UK.
PEACE!!!
And if our device is not from O2?
Should we use a ROM (the 1st from the tutorial) for our device insted of the O2?
Another question: is the RADIO frequence the same for all the region? Like, I have an ASIAN TMOB that I use here in Brazil. If I flash an European ROM, will it still works with my carrier (TIM)?
[]'s
Cris
cpimentel said:
And if our device is not from O2?
Should we use a ROM (the 1st from the tutorial) for our device insted of the O2?
Another question: is the RADIO frequence the same for all the region? Like, I have an ASIAN TMOB that I use here in Brazil. If I flash an European ROM, will it still works with my carrier (TIM)?
[]'s
Cris
Click to expand...
Click to collapse
Sure if the O2 one didnt work for u, do read to know what i said the first ROM will do after flashing, so if u have a ROM that can do that that is not O2 then go ahead
Yes it will
PEACE!!!
ClashOfThe said:
worked on mine first time
thanks for sharing
Click to expand...
Click to collapse
Have you tried to rollback to your previous ROM? Just for test purpose?
cpimentel said:
Have you tried to rollback to your previous ROM? Just for test purpose?
Click to expand...
Click to collapse
Yeah!!! U can roll back
PEACE!!!
rdilallo said:
Does the process described above work on a US version of the T-Mobile HD7?
Click to expand...
Click to collapse
the same question
cool1fish said:
the same question
Click to expand...
Click to collapse
nope, unlucky us, we need to do it with goldcard
1> Look for a file called RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22 .33a.50.10U_Signed_by_ansar (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
i can't find it anywhere!!!
can you give me a link ,tks
cool1fish said:
1> Look for a file called RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22 .33a.50.10U_Signed_by_ansar (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
i can't find it anywhere!!!
can you give me a link ,tks
Click to expand...
Click to collapse
Here your links: http://www.multiupload.com/T4VW5DPQB2
this method not work on HD7 T-MObile =(
Hello to all ..
My problem is that here ..
In a few words I wanted to install in my HTC 7392 with node HD7 SPL Bootloader 4.5 and unlocked the rom modified mango ..
but before you do anything, I had to install HSPL / RSPL in my HTC HD7 ..
I downloaded the "DFT_XSPL_WP7FG1"
I followed a guide ..
MAH reached the point of selecting the SPL, the list of the program reached only up to 3.4 ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
so going forward I get an error in the program where it was impossible to go on ..
So I unplugged the HD7 and I tried to do it again ..
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
I already tried to do the backup but nothing = (..
What does the spl screen say when your in bootloader?
Sounds like you have the 4.xx version.. If that's the case you need to flash an official nodo rom first. The hspl doesn't support spl's 4.xx yet.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
crazysax1 said:
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
Click to expand...
Click to collapse
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
But you have to worry about?
What are the consequences?
Is serious?
crazysax1 said:
Hello to all ..
My problem is that here ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
(..
Click to expand...
Click to collapse
you didnt read the instructions that are in giant bold letters all over those threads...you had spl 4.5 and tried to install the hspl. youve unfortunately half bricked your phone and currently it looks like it may NOT be fixable at all. try the gold card method listed above, i havent done it or read the thread but briefly but it looks like it may be a work around. unfortunately tho youre phone is BBQ'd.
sh4d0w86 said:
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
Click to expand...
Click to collapse
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
alessio81pa said:
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
Click to expand...
Click to collapse
i honestly have no idea how goldcard method works.
haven't had any experience with it.
you may message the individual who's post i linked to and ask them.
sorry i can't be of more help.
sh4d0w86.
Half bricked possibilities
Hi friends. Do you really know anybody, if goldcard, Zune HTC update, JTAG or something another can solve hb problem? I am also in the "warnings late reading ignorants" club from last weak. But, I got a reply from a single "Half Bricked repairing" service near of Central Europe (GSM-TechNix.de): "Dear Sir, HTC 7 Pro is no Supported by JTAG! Sorry we can not help for this Phone." I have a little idea - to replace only internal information about bootloader version (I have no info on tricolore, but 3.2.2250.0 in Settings/about), connect to Zune and replace HTC update, if it is depend by this number. Is it possible? I have unlocked phone with pre-nodo (older backup has deleted by Zune), then HTC debug application or some homebrew features for values writing can work.
(From another forums:
_________
"Just updated my half bricked phone(bootloader problem) via Zune with HTC update for Windows Phone and the bootloader hasn't been fixed, so our only chance is with XTC Clip or DFT to come with a solution
Actually I got the same problem using an HTC Trophy A1 Version."
________
"For now your/our phone(s) are half-bricked. But as soon as a new update is available - including a new Radio Version everything will work fine again. Had the same problem when debranding my phone. After updating to 7932 via Zune everything was fine again - until I applied the leaked Mango Update.
So again - be patient "
________
"If your device is halfbricked you can use the goldcard method to recover your phone. If it's full bricked you need to make a jTag."
________
"Goldcard cannot repair halbricked WP7 phone."
________
). Thanks for replies, sorry for my english. M.
can i take the built in sd card out of my hd put it in my sd card reader and put nodo or any win7 os onit and then put t in my phone and boot up just wondering isit possible
messdup said:
can i take the built in sd card out of my hd7 put it in my sd card reader and put nodo or any win7 os onit and then put t in my phone and boot up just wondering isit possible
Click to expand...
Click to collapse
edit for typo
no, this wouldn't work. not even sure why one would even want to do this...
sh4d0w86 said:
no, this wouldn't work. not even sure why one would even want to do this...i unlpugged my hd7 during restoring through zune due to lost contacts and it was easier to restore than type them all back in anyway i unplugged it and now it wont boot past htc splash screen
Click to expand...
Click to collapse
looks like you have to start all over again.
put phone into bootloader...check which verision you have ... then reinstall custom rom
cheers
happy new year and have a gr8 day
jhonny said:
looks like you have to start all over again.
put phone into bootloader...check which verision you have ... then reinstall custom rom
cheers
happy new year and have a gr8 day
Click to expand...
Click to collapse
happy new year to u dude but i got spl 5 so the whole problem with that makes things harder any ideas
there is a couple of ways mentioned here.
put phone into bootloader and install stock standard nodo rom. that will downgrade your hspl. there is a thread ....how to downgrade hspl with more detail.
just follow the instructions. once u have downgraded then you can install cotulla hspl and after that the custom rom
cheers
messdup said:
sh4d0w86 said:
i unlpugged my hd7 during restoring through zune due to lost contacts and it was easier to restore than type them all back in anyway
Click to expand...
Click to collapse
add your contacts to your Windows Live account, will sync your contacts to your device automatically.
messdup said:
happy new year to u dude but i got spl 5 so the whole problem with that makes things harder any ideas
Click to expand...
Click to collapse
if you have a Europe device, see here.
if you have a Zune back-up of NoDo, see here.
else try here.
if successfully downgraded Bootloader 5.xx, see here to XSPL.
Click to expand...
Click to collapse
sh4d0w86 said:
messdup said:
add your contacts to your Windows Live account, will sync your contacts to your device automatically.
if you have a Europe device, see here.
if you have a Zune back-up of NoDo, see here.
else try here.
if successfully downgraded Bootloader 5.xx, see here to XSPL.
Click to expand...
Click to collapse
thanks for the help guys but how do i change spl 5 when i cant get past htc logo and bootloader screen doesnt give me serial/usb so how will i install custom roms
Click to expand...
Click to collapse
messdup said:
thanks for the help guys but how do i change spl 5 when i cant get past htc logo and bootloader screen doesnt give me serial/usb so how will i install custom roms
Click to expand...
Click to collapse
jtag would be your guaranteed solution to your problem. here. riffbox is a popular choice.