[Q][AOKP_JB_BUILD_2] Status 7 - symlink: some symlinks failed - LG Optimus Black

Hi all, i have this problem, when i try to flash this rom http://forum.xda-developers.com/showthread.php?t=1887876 i've got error message.
Code:
...
Installing update...
symlink: some symlinks failed
E:Error in /sdcard/_Roms/2012_9_99_AOKP_JB_Build_2_version/aokp_p970_Beta_1.zip
(Status 7)
Installation aborted.
I've tried everything, wipe all, erased all what i can, i've also tried format and install original ROM for OB with SmartFlash Tool.
Notthing helped, know everyone what am i doing wrong, cause no one had this problem in original thread.
Please help, thanx and have god day
(My english is not perfect, so please excuse possible errors...)

Don't use officiall touch cwm.
Try stock cwm or tantrums latest touch cwm.
Ooor try downloading the zip again.
Sent from my Jelly Bean phone.

Full wipe, latest tantrums cwm, yip redownloaded. Status 7 again...
RomWiz said:
Don't use officiall touch cwm.
Try stock cwm or tantrums latest touch cwm.
Ooor try downloading the zip again.
Sent from my Jelly Bean phone.
Click to expand...
Click to collapse
Well, i tried, tantrums touch cwm, classic cwm, and also the latest Tantrums CWM (v3 for boys ) ...
and it did not helped, so ill try download the zip again, but it was not corrupted or damaged.
Downloaded, and...
...nope, even this does not helped.
This is my walkthrue:
Make full wipe (data/factory reset; cache partition; dalvik)
Fix permissions.
Install zip -> and here i've got the error.

amotio said:
Well, i tried, tantrums touch cwm, classic cwm, and also the latest Tantrums CWM (v3 for boys ) ...
and it did not helped, so ill try download the zip again, but it was not corrupted or damaged.
Downloaded, and...
...nope, even this does not helped.
This is my walkthrue:
Make full wipe (data/factory reset; cache partition; dalvik)
Fix permissions.
Install zip -> and here i've got the error.
Click to expand...
Click to collapse
Noneed to fix permissions unless it says you need to in the thread..
Try without fixing permissions.
Sent from my Jelly Bean phone.

RomWiz said:
Noneed to fix permissions unless it says you need to in the thread..
Try without fixing permissions.
Sent from my Jelly Bean phone.
Click to expand...
Click to collapse
Notthing ... i dont know what am i toing wrong. I've tried everything and still Status 7 ... some symlinks failed.
But other JB roms can be installed normally, with full wipes, in classic CMW and touch CWM [both tantrums] also in stock recovery.
I'm out of ideas ... :/
But anyway, thanx for helping.

When I had this issue I flashed again stock rom, using Smart Flash Tool. After that, the problem has gone.

It works!
nhanzes said:
When I had this issue I flashed again stock rom, using Smart Flash Tool. After that, the problem has gone.
Click to expand...
Click to collapse
Doh! ... I know what was the mistake. The wipes after installing via SmartFlash tool. Now, without wipes it works.

Fixed
amotio said:
Doh! ... I know what was the mistake. The wipes after installing via SmartFlash tool. Now, without wipes it works.
Click to expand...
Click to collapse
I had same issue and for me the fix was this:
In Recovery (ClockworkMod 5.0.2.0) go to Mounts and Storage and Mount /sdcard and then Mount /sd-ext. Then I went back and installed zip from sdcard.

RDanutz said:
I had same issue and for me the fix was this:
In Recovery (ClockworkMod 5.0.2.0) go to Mounts and Storage and Mount /sdcard and then Mount /sd-ext. Then I went back and installed zip from sdcard.
Click to expand...
Click to collapse
Error mounting sd-ext!
So same errror...No fix till now.

In my opinion you're putting a lot of effort in trying to install this rom on your phone but why even bother with a rom that has bugs and is not being developed any further?
It won't get any better anyway.
Just my 2 cents.....
Sent from my LG-P970 using Tapatalk 2

Hello,
I had this problem and i only resolved it by reinstalling CWM (tantrums).
By the way, I could install Gingerbread and ICS ROM's but none CM10x.
Hope this help...

RDanutz said:
I had same issue and for me the fix was this:
In Recovery (ClockworkMod 5.0.2.0) go to Mounts and Storage and Mount /sdcard and then Mount /sd-ext. Then I went back and installed zip from sdcard.
Click to expand...
Click to collapse
This solution works. Please try unmounting usb storage a couple of times.:good:

Related

[Q] Help. Can't install CM7

Hi,
I'm trying to get out off the stock rom, but I just can't
What am I dooing wrong.. (No SD card is used)
1) install CWM 4.0.0.5 (Int)
2) nandroid backup
3) Mount USB, to get the backup on to the PC
4) Smartflash Baseband 0606
5) NVFLASH stock rom (just replacing the recovery with CWM 4.0.0.5)
6) boot into CWM
7) Wipe Data/factory, cache, dalvik
8) Install zip (CM_p990_full-50), have also tried build 43
9) Reboot
10 ) crying... everytime it starts with FC of LGE everything. (10-13 popups, and endless loop in LG.SetupWizard)
Yes, I know i'm a NOOB, but this just makes no sence to me...
Please advice....
Can you install any other ROM, say the MoDaCo vanilla?
Rusty! said:
Can you install any other ROM, say the MoDaCo vanilla?
Click to expand...
Click to collapse
Yes, and it seams to work.
Then I did a Backto ext3 from cwm, and then tryed wipe and install CM. but now noting happers, it says "installing" but nothing like "writing to ...." and after that I'm stuck on the LG logo on an reboot.
Can't even restore back to my old rom....
so back to an NVFLASH for me and a restore...
Anyone.... Please HELP....
OK, that's proper weird.
From memory (and it's not that great as I'm on the Amigos) you wont see much other than 'installing..." when flashing CM, so wouldn't worry about that.
Did you do anything in recovery before applying the back to EXT3 patch? If so it might not have worked, as it needs /system and /data to be unmounted (found that one out for myself lol)
i had the same issue, try to reflash original cwm from ROM manager and youll be able to install cm7
Sent from my Optimus 2X using XDA Premium App
cokeman0 said:
10 ) crying... everytime it starts with FC of LGE everything. (10-13 popups, and endless loop in LG.SetupWizard)
Click to expand...
Click to collapse
I've no idea what you are doing. But I'm pretty sure there isn't supposed to be any "LG.SetupWizard" in CM7.
^ What he said. There is a SetupWizard.apk and an LGEServices.apk but no LG.SetupWizard. Or LG anything else, for that matter.
Hi,
Updateded Rom Manager.
Installed CWM 3.2.0.0
Did an CM_52 via Rom Manager (Selecting Backup and both Wipe's)
No Google Apps (As they are still failing to download via Rom Manager.
Booting Cyanogen mod 7
AND YES YES YES YES YES YES... this time it worked!
Boot to CWM and install ZIP (gapps-gb-20110613-signed)
And now time to play.... Thanks for the help..
Guess CWM 3.2.0.0 was the fix...
cokeman0 said:
Hi,
Updateded Rom Manager.
Installed CWM 3.2.0.0
Did an CM_52 via Rom Manager (Selecting Backup and both Wipe's)
No Google Apps (As they are still failing to download via Rom Manager.
Booting Cyanogen mod 7
AND YES YES YES YES YES YES... this time it worked!
Boot to CWM and install ZIP (gapps-gb-20110613-signed)
And now time to play.... Thanks for the help..
Guess CWM 3.2.0.0 was the fix...
Click to expand...
Click to collapse
glad to hear that AFAIK cwm 3 series work better so far.
Sent from my Optimus 2X using XDA Premium App
I have the same problem coming from stock.
I have CWM 4.0.0.5 external installed. Took nandroid backup, wiped data and cache, flashed nightly 52, flashed gaaps and everything went fine but when I reboot I get stuck on the CM7 logo in an endless bootloop.
Thankfully I could restore stock but what I am doing wrong?
Try cwm 3.2.0.0 saved me.
Sent from my Optimus 2X using XDA App
cokeman0 said:
Try cwm 3.2.0.0 saved me.
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
That´s what I did and it worked like a charm, wonder why though?
cokeman0 said:
Hi,
Updateded Rom Manager.
Installed CWM 3.2.0.0
Did an CM_52 via Rom Manager (Selecting Backup and both Wipe's)
No Google Apps (As they are still failing to download via Rom Manager.
Booting Cyanogen mod 7
AND YES YES YES YES YES YES... this time it worked!
Boot to CWM and install ZIP (gapps-gb-20110613-signed)
And now time to play.... Thanks for the help..
Guess CWM 3.2.0.0 was the fix...
Click to expand...
Click to collapse
I have kindly the same problem
When I want to root CM7 always says installation aborted
but i want follow the same strategy
how i can
Updateded Rom Manager.
Installed CWM 3.2.0.0
Install CM via Rom Manager, or download CM and do it yourself
Boot into recovery
Mount USB, move the CM to the SD card. Wipe user, cache and delvik
install ZIP and select CM, and remember to put gapps on the SDCARD and install that before rebooting...
------ I didn't realise there is page 2 and the question is solved...

emmc

i encountered a problem while trying to flash checkrom revo into cwm. e: cant open /emmc/checkrom revo notehd v5(bad)
i already remove the external memory card but still the problem shows up.
Sent from my GT-N7000
weng_cas said:
i encountered a problem while trying to flash checkrom revo into cwm. e: cant open /emmc/checkrom revo notehd v5(bad)
i already remove the external memory card but still the problem shows up.
Sent from my GT-N7000
Click to expand...
Click to collapse
Re-download the rom. The zip file is corrupted i guess and also check for the md5 checksum.
abhisahara said:
Re-download the rom. The zip file is corrupted i guess and also check for the md5 checksum.
Click to expand...
Click to collapse
i already check for md5. the file is ok. its not corrupted
CWM in recovery?
weng_cas said:
i already check for md5. the file is ok. its not corrupted
Click to expand...
Click to collapse
Are you running from CWM app or using CWM in recovery mode? I always boot into recovery mode before flashing ROMS - it seems to be the most reliable way.
Also make sure you clear your caches before flashing the ROM (there's lots of posts in the development section about this) Hopefully a few searches in there will help you find a solution. Good luck!
TempusFudgeIt said:
Are you running from CWM app or using CWM in recovery mode? I always boot into recovery mode before flashing ROMS - it seems to be the most reliable way.
Also make sure you clear your caches before flashing the ROM (there's lots of posts in the development section about this) Hopefully a few searches in there will help you find a solution. Good luck!
Click to expand...
Click to collapse
yes i am running cwm in recovery mode. i even did the proper way to wipe. format/system, format/data, format/cache. but still the problem occurs.
weng_cas said:
yes i am running cwm in recovery mode. i even did the proper way to wipe. format/system, format/data, format/cache. but still the problem occurs.
Click to expand...
Click to collapse
And you must be rooted, so shouldn't have permissions error. Try running a permissions fixer like SU Update Fixer (free on Market), then retry flash, to see if that helps?
TempusFudgeIt said:
And you must be rooted, so shouldn't have permissions error. Try running a permissions fixer like SU Update Fixer (free on Market), then retry flash, to see if that helps?
Click to expand...
Click to collapse
yes of course i am rooted,and yes i did try permisssions fixer.. still the same
What are you currently running for a Rom and Kerenel? I have had this happen a couple of times on Epic4GT. There are some compatibility issues with various versions of CWR and how the rom was packaged.
The first version of Checkrom I tried failed on me too. Then last night I decided to try again and it worked. I was on a stock KK2 rom with Abyss 4.2 kernel and one of the Touch CWR and it worked fine for me this time. Maybe try flashing the Abyss Kerenel and then try flashing the Checkrom again.
Edit
Clear Cache and Delvic cache (under Advanced) before flashing a kerenel. I have seen boot loops if you do not.
gedster314 said:
What are you currently running for a Rom and Kerenel? I have had this happen a couple of times on Epic4GT. There are some compatibility issues with various versions of CWR and how the rom was packaged.
The first version of Checkrom I tried failed on me too. Then last night I decided to try again and it worked. I was on a stock KK2 rom with Abyss 4.2 kernel and one of the Touch CWR and it worked fine for me this time. Maybe try flashing the Abyss Kerenel and then try flashing the Checkrom again.
Edit
Clear Cache and Delvic cache (under Advanced) before flashing a kerenel. I have seen boot loops if you do not.
Click to expand...
Click to collapse
there's a new rom CheckROM NoteHD™ v6 i will try this instead. maybe this will work..hopefully!

[Q] Stuck in CWM 5.0.2.6 Recovery - Flashing ROMS doesn't work

Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
RolloJarvis said:
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
Click to expand...
Click to collapse
Reflash with Smart Flash Tool. A few kernels automatically go to recovery if they fail to load. I can't think of anything else.
Try changing your CWM Recovery by flashing another version. Use my CWM Recovery flasher (in my signature).
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
RolloJarvis said:
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
Click to expand...
Click to collapse
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
UniversalSS said:
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
RolloJarvis said:
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
Click to expand...
Click to collapse
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
might be redundant saying this but in cwm itself have you flashed the 6.0.1.4 update within itself ald?
N00BY0815 said:
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
Click to expand...
Click to collapse
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
Other bin/fls ROMs are HERE. (All these links are working again!)
You need to install LG Mobile drivers. They are located HERE. [CRC MD5: e4614071e72c0292d3a8238908b5c7ba]
Click to expand...
Click to collapse
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
RolloJarvis said:
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
Click to expand...
Click to collapse
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
N00BY0815 said:
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
Click to expand...
Click to collapse
I have just done exactly these steps. I have tried flashing both the zeus rom and AOKP jelly bean build 4. Each time the ROM flashes successfully, however when I select "reboot system now," it just boots straight back to recovery again...
The only thing I could think of trying would be to restore a nandroid with cwm. I dont have one though, can anyone link me to a working nandroid, or upload one?
thanks
A crazy idea......
Stuck G key?
Sent from my LG-P970 using xda premium
could be... I havent got the phone at the moment but ill check next week. Not sure how i'd fix it though
got the phone back again... when i go into CWM "Key Test" option, it implies "button 0" is being pressed repetitively. Anyone know which button this is?

Phone got bricked, download mode works

I got my phone bricked! Recovery does not work. All i can see is GT-7000 with triangle samsung logo. Can't even see samsung glowing logo.But download mode is working. What should i do now to not get my phone bricked totally?
Bricked when i flashed new rom. I did full wipe/cache/dalvik cache. Problem was not there. Something with recovery itself. When i flashed previous rom recovery changed from PhilZ-cwm6 to CMW 5.5 and i tried flashing rom with it. Why recovery changed with new rom install?!??
Odin. Back to GB and start again. If you get stuck at factory fs you may want to try the revive method posted in general.
Sent from my GT-N7000 using xda app-developers app
SKYLEM said: download alliance ROM v2.1 resurection and use odin to flash it. Your phone will be back then, reboot recovery wipe cache dalvik and data, reboot. Download any xxls2 rom and flash it try to restore your data using titanium extract from nandroid.
Can't find download link for ressurection edition just for simple edition. He says it will be uploaded then he got internet or something... :/ If someone have got link please post. Thanks!
Pickepys said:
SKYLEM said: download alliance ROM v2.1 resurection and use odin to flash it. Your phone will be back then, reboot recovery wipe cache dalvik and data, reboot. Download any xxls2 rom and flash it try to restore your data using titanium extract from nandroid.
Can't find download link for ressurection edition just for simple edition. He says it will be uploaded then he got internet or something... :/ If someone have got link please post. Thanks!
Click to expand...
Click to collapse
Better if you flash any Stock GB rom using PC odin, get ur phone working & then flash any custom rom of your choice..
Pickepys said:
SKYLEM said: download alliance ROM v2.1 resurection and use odin to flash it. Your phone will be back then, reboot recovery wipe cache dalvik and data, reboot. Download any xxls2 rom and flash it try to restore your data using titanium extract from nandroid.
Can't find download link for ressurection edition just for simple edition. He says it will be uploaded then he got internet or something... :/ If someone have got link please post. Thanks!
Click to expand...
Click to collapse
Ok first,you need recovery back. I assume you know how to use PC Odin? You do? good:good:
You need to download a stock ICS kernel. Get one (any will do) in Tar format from Dr. Ketan here.
Now download one of Philz Temp recovery's from here (again any will do.)
You need to get Philz temp recovery onto external SD card and put it back into your Note. (Old phone?, Camera?, Card reader?....)
Done that? Excellent!
OK, now flash stock ICS Tar file in PC odin. (put it in PDA box).
Reboot into recovery, "apply update from external storage" and select the temp Philz recovery.
The recovery will now miraculously change to Philz 6.0.1.4
Now select "restore" and choose the file that you backed up on Philz before.
When the operation completes, reboot phone. You will be back on ROM from when you did original Philz backup.:good:
deleted
shoey63 said:
Ok first,you need recovery back. I assume you know how to use PC Odin? You do? good:good:
You need to download a stock ICS kernel. Get one (any will do) in Tar format from Dr. Ketan here.
Now download one of Philz Temp recovery's from here (again any will do.)
You need to get Philz temp recovery onto external SD card and put it back into your Note. (Old phone?, Camera?, Card reader?....)
Done that? Excellent!
OK, now flash stock ICS Tar file in PC odin. (put it in PDA box).
Reboot into recovery, "apply update from external storage" and select the temp Philz recovery.
The recovery will now miraculously change to Philz 6.0.1.4
Now select "restore" and choose the file that you backed up on Philz before.
When the operation completes, reboot phone. You will be back on ROM from when you did original Philz backup.:good:
Click to expand...
Click to collapse
Ok. Flashed kernel. Pass! I got into recovery and there is lot of error. They says
E:failed to mount /cache (invalid argument)
E:can't mount /cache/recovery/log
....
...
about 12 of these
Is it safe to flash recovery or i should do something more?
And other thing is https://www.dropbox.com/s/qkx2z5auzxg8k0j/20121103_113422.jpg
I shutters. Is this ok? I now just flashed N7000XXLPYkernel. Recovery works.
Try flashing the temp recovery and see what happens (its safe)
You may have corrupted partitions, We can address that if temp recovery boots.
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Try flashing the temp recovery and see what happens (its safe)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
-- Install /sdcard ...
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache
That's what i got after trying to install update from ext sd card.
And if i do data or wipe cache i could super brick my phone?
Pickepys said:
-- Install /sdcard ...
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache
That's what i got after trying to install update from ext sd card.
And if i do data or wipe cache i could super brick my phone?
Click to expand...
Click to collapse
Theoretically factory reset wont brick, even on stock recovery. But don't do that just yet, time for a different approach, just wait, back soon...
---------- Post added at 05:59 PM ---------- Previous post was at 05:54 PM ----------
OK now go here and download Samsung_Wipe_Data_System_Cache_2.0-signed.zip get it onto external SD card and flash from stock recovery. If it works, try flashing temp recovery again.
shoey63 said:
Theoretically factory reset wont brick, even on stock recovery. But don't do that just yet, time for a different approach, just wait, back soon...
---------- Post added at 05:59 PM ---------- Previous post was at 05:54 PM ----------
OK now go here and download Samsung_Wipe_Data_System_Cache_2.0-signed.zip get it onto external SD card and flash from stock recovery. If it works, try flashing temp recovery again.
Click to expand...
Click to collapse
Same.
-- Install /sdcard ...
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache
Why haven't you flashed a full stock gb rom so far?
Stop trying non sense, just restock to gb and start from scratch
Tapatalking on my GT-N7000
Pickepys said:
Same.
-- Install /sdcard ...
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache
Click to expand...
Click to collapse
OK signs aren't good. Try flashing Pre-rooted GB ROM from Dr Ketan, via PC Odin. Hopefully it wont get stuck.......
msedek said:
Why haven't you flashed a full stock gb rom so far?
Stop trying non sense, just restock to gb and start from scratch
Tapatalking on my GT-N7000
Click to expand...
Click to collapse
Ok. This how it looks now. https://www.dropbox.com/s/6q0qdvk942g7ek8/56496489.jpg?m
So it will be only ok if i flash any 2.3.5?
For ex. N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXAKJ4 ------------------Germany (Debitel)-------------------
Or can i flash 4.0.4. Wich is safer?
Downloading link you gave me.
msedek said:
Why haven't you flashed a full stock gb rom so far?
Stop trying non sense, just restock to gb and start from scratch
Tapatalking on my GT-N7000
Click to expand...
Click to collapse
Yes, quite right, but I was trying to see where the problem is. And it looks like Data partition is bricked. I feel doing GB through Odin will just get stuck (classic superbrick symptom).
Lets see how he goes....
just flash any 2.3.5 or 2.3.6
from the thread you following. and let us know if it passes in odin
Pickepys said:
Ok. This how it looks now. https://www.dropbox.com/s/6q0qdvk942g7ek8/56496489.jpg?m
So it will be only ok if i flash any 2.3.5?
For ex. N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXAKJ4 ------------------Germany (Debitel)-------------------
Or can i flash 4.0.4. Wich is safer?
Downloading link you gave me.
Click to expand...
Click to collapse
4.0.4 Safer? Hell no... Ics stock kernel its the hell.. It has the mmc_cap_erase bug and you don't want to be there..
Go for gb and if everything goes good, then flash any aosp rom or the new JB leaked its beautiful... And safe
Tapatalking on my GT-N7000
Thanks for helping out
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Thanks for helping out
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
PASS!!!! THANK GOD!!! Samsung glowing logo appeared again!! I will give you thanks 40 for each of you!! And maybe more later! :highfive::good:
Phone works! Menu and etc...
So i have GB kernel too when installed this? Now i need to install straight jellybean and forget 4.0.4 forever?
yoohooo.

Recovery problems

Hey,
After updating my HTC one with OTA for latest Hboot I flashed Viperone 2.0. now i try to install a custom kernel ( tried different ones) but i cant get it to install.
Recovery starts aroma, I'm able to check/uncheck all the options, but when it starts to install, my recovery just reboots. I tried TWRP, and CWM touch and non touch. I always wipe cache with fastboot erase cache. Did this like 100 times. Also wiped cache partition and dalvik in recovery. Downloaded the kernels multiple times on phone, and I transferred them from PC. I had the same issue with the xposed patch for xprivacy, but not when I installed the rom. I never had this issue before upgrading my Hboot.
Do I miss something? Anyone familiar with this? Any help appreciated
staffordniko said:
Hey,
After updating my HTC one with OTA for latest Hboot I flashed Viperone 2.0. now i try to install a custom kernel ( tried different ones) but i cant get it to install.
Recovery starts aroma, I'm able to check/uncheck all the options, but when it starts to install, my recovery just reboots. I tried TWRP, and CWM touch and non touch. I always wipe cache with fastboot erase cache. Did this like 100 times. Also wiped cache partition and dalvik in recovery. Downloaded the kernels multiple times on phone, and I transferred them from PC. I had the same issue with the xposed patch for xprivacy, but not when I installed the rom. I never had this issue before upgrading my Hboot.
Do I miss something? Anyone familiar with this? Any help appreciated
Click to expand...
Click to collapse
I had a similar problem with a broken .zip-file. If it goes to Aroma installer it is very unlikely to be the problem but try to redownload the file. What versions of TWRP and CWM are you using?
What Hboot version did you flash? Why didn't you flash the complete 2.24 firmware package?
Tried fastboot erase cache already?
baedaa said:
I had a similar problem with a broken .zip-file. If it goes to Aroma installer it is very unlikely to be the problem but try to redownload the file. What versions of TWRP and CWM are you using?
What Hboot version did you flash? Why didn't you flash the complete 2.24 firmware package?
Tried fastboot erase cache already?
Click to expand...
Click to collapse
I've downloaded the zips multiple times, on my phone and I also transfered them from my PC. So its unlikely that the zip is broken. I restored a stock nandroid/stock recovery to recieve the OTA 4.2.2, and my Hboot is now 1.54. After that I reflashed recovery and installed viperone.
I used CWM 6.0.3.5 and TWRP 2.6.0.1. Also did fastboot erase cache multiple times.
I'm gonna search for CWM 6.0.3.2, and give that a try.
When i try to flash the kernel through Venom Hub, recovery give the error:
E: Invalid command argument
Finding update package...
E: unknown volume for path [INTERNALSDCARD: 0/venom/kernel/ElementalX-m7-3.4.zip
E: Can't mount INTERNALSDCARD: 0/venom/kernel/ElementalX-m7-3.4.zip
Instalation aborted
When i go to mounts and storage in CWM, there is no option to mount/unmount sdcard. Shouldnt there be a option for this?
Try downloading the kernel directly from flar's thread and leave it in your Downloads folder and then try flashing it from there in recovery
dgtiii said:
Try downloading the kernel directly from flar's thread and leave it in your Downloads folder and then try flashing it from there in recovery
Click to expand...
Click to collapse
That still wont work... I don't know what but something is broken
Sent from my HTC One using xda premium
staffordniko said:
When i try to flash the kernel through Venom Hub, recovery give the error:
E: Invalid command argument
Finding update package...
E: unknown volume for path [INTERNALSDCARD: 0/venom/kernel/ElementalX-m7-3.4.zip
E: Can't mount INTERNALSDCARD: 0/venom/kernel/ElementalX-m7-3.4.zip
Instalation aborted
When i go to mounts and storage in CWM, there is no option to mount/unmount sdcard. Shouldnt there be a option for this?
Click to expand...
Click to collapse
could be a problem with your internal memory. try to do a backup of your sdcard and format it via recovery if there is an option to do this
Same issue!!
baedaa said:
could be a problem with your internal memory. try to do a backup of your sdcard and format it via recovery if there is an option to do this
Click to expand...
Click to collapse
I did a format, re-downloaded the file, and still the same I'm running out of options here lol
I format/wiped everything in recovery, sdcard, factory reset etc. Pushed a rom with adb, and installed. But when i try to install a kernel I've got the same problem....
Ok I checked with a friend in recovery, an he has the option to mount sdcard... I don't have this option in recovery. Something wrong with my sdcard?
Sent from my HTC One using xda premium
staffordniko said:
Ok I checked with a friend in recovery, an he has the option to mount sdcard... I don't have this option in recovery. Something wrong with my sdcard?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Sdcard is actually the same as your internal memory. If something would be wrong with it it would not even boot up. If I got that right you even select the files you want to flash from your SD.
Gesendet von meinem HTC One mit Tapatalk 2
baedaa said:
Sdcard is actually the same as your internal memory. If something would be wrong with it it would not even boot up. If I got that right you even select the files you want to flash from your SD.
Gesendet von meinem HTC One mit Tapatalk 2
Click to expand...
Click to collapse
Okay, so i guess that has nothing to do with the problem i cant flash kernels...
I'm having exactly the same problem after flashing ViperOne 2.0.0. I tried redownloading the zip file several times, other kernels and changing recovery but nothing has helped. I was able to flash a custom kernel fine on ViperOne 1.2.1. I wonder if the ROM has something to do with it...
M1ren said:
I'm having exactly the same problem after flashing ViperOne 2.0.0. I tried redownloading the zip file several times, other kernels and changing recovery but nothing has helped. I was able to flash a custom kernel fine on ViperOne 1.2.1. I wonder if the ROM has something to do with it...
Click to expand...
Click to collapse
Hmm I'm on viperone 2.0 too, Rom does nothing to recovery right ?
I think I just fix it by going very slowly through aroma on when installing the kernel. Like 5 seconds wait on every step , and now it installs fine....
Sent from my HTC One using xda premium

Categories

Resources