Hi all. I have a htc trinity that was installed on the Elias' rom elegant and olipro 1.30. Since I need to go back to the original rom I tried to flash it from sd. It started flashing but it lasted very little, not going over the 1% and finished. Now I find myself stuck in bootloader with IPL 0.50 and SPL 1.07, but I can not flash anything. What can I do? Thank you.
Ps: when I try to flash the rom now, it gives me error 00028002 and says "not allowed"
Help please:crying::crying::crying:
Related
so i upgraded to t mobile 2.26 and it worked fine..then i tried to flash the underground wm6 and it stalled out at 96 percent and errored...now im stuck at the boot screen with IPL 2.25 and spl 2.25 ....when i try to run the RUU it give me error: 260 or 274 connection or update error...
i dont know what else to do...anybody have any suggestions? please help!
Please read through the Wiki before posting.
Direct link: http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard#upgradings
There are several suggestions there on reviving a possibly bricked phone.
i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(
stolli said:
i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/showthread.php?t=298613
BTW:It really helps if you tell us what IPL, SPL, OS versions you are on (those numbers that show up when you reboot). Also what type of phone you have (G3 or G4).
im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1
stolli said:
im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1
Click to expand...
Click to collapse
Why are you doing shell tool with a G3 (I've seen where some G3's have been bricked with shell tool is used on them)? Did you try to flash the Wizard Love ROM? That seems to help in a lot of situations.
So again, more info helps. What is the exact error you are getting. And what rom are you trying to install? Is your phone CID Unlocked? May be worth trying to go back down to the Button Rom and doing the CID Unlock again.
PROBLEM SOLVED!
i dont know what was wrong..really..i just restarted my comp...and downgraded to a stock rom..and it worked fine!
man you have no idea how much i was freakin out..
thanks for all your help! i really appriate it!
time to try again
I have tried to update to wm6 but the update stoped now i am stucked at bootloader. My ipl 1.01 / spl is 2.26 what should i do next?
Same thing everybody else does. Same thing thats mentioned many times on this forum. Flash back to your carriers rom then you can try to flash again.
whatever i try to flash i get error 300
Did you correctly unlock your device? I mean, CID? It seems looking on your IPL/SPL that you still need to unlock to go on.
Look for the G3 thread "how to" by Dr. P on the top of Wizard upgrading and follow the instructions there. You should get away from that...
Good luck!
Artan said:
I have tried to update to wm6 but the update stoped now i am stucked at bootloader. My ipl 1.01 / spl is 2.26 what should i do next?
Click to expand...
Click to collapse
mis-matched IPL/SPL show that you skipped at least one and possibly more steps in unlocking your device. Try again and don't skip the step that says to flash the button rom again after CID unlocking to downgrade the SPL, then flash up to a 2.xx CARRIER rom prior to flashing anything else. You cannot flash a 2.xx or higher custom rom into 1.xx bootloaders.
I had the same problem so I flashed the button rom again and everytime after that when I tried to flash the official t-mobile rom it would change the IPL to 1.01.0000. So after flashing the button rom then the t-mobile rom back and forth and it kept doing that. So I installed the IPL/SPL 3.08 then the 2.19 Radio Rom and just flashed a WM6 os and all works great now
Button ROM issue
I get stuck on the Button ROM loader. At 98% on the phone it stops. Left it going till the battery died and now charging again. Last time I had to start the flash without act syn. Went right into the TMobile ROM and it works again. Any help in trying to get it, Buttom ROM, to work, as in flash completely?
... works now ...
Hi everyone,
I'm stuck wit CID unlocking. I've got a G3 MDA Vario(Dutch T-mobile)
First i tried to unlock with the button rom(custom__ruu_wizard_1050412_wwe_101_11210_wwe), but everytime i flash that rom it gets stuck at 98%.
After that i tried the Xda_MiniS_LaunchROM_v154102 Rom, and it did flashed my IPL to 1.5 But my SPL is still at 2.21. But i tried Lokiwiz02b and i get the ERROR: ITWriteDisk - An internal error occurred.
After that i tried the Wizard_love Rom. And i tried again. The ipl stayed at 1.5 and spl at 2.21. I tried Lokiwiz again, but with no result. I still get the error! Is there a solution?
Thanks!
Hello Guys,
I have the cingular 8125 G3 and I need to load a rom into it. I have try to load 2 diferent roms but neither worked. I have followed this thread: http://forum.xda-developers.com/showthread.php?t=310831 but nothing.
Here's the thing, after I load the rom the screen says:
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Any help I would really apreciated. If you want I can donate too.
Thanks
Try to flash back to Button's ROM, then try to use Wizard Service Tool to unlock CID and verify that CID is unlocked in WST.
After unlocking successful, you can flash with any ROM you want.
Thanks for the answer.
Now, just for my records, how do you flash back to buttons rom?
Is it to flash the original rom?
arys64 said:
Hello Guys,
I have the cingular 8125 G3 and I need to load a rom into it. I have try to load 2 diferent roms but neither worked. I have followed this thread: http://forum.xda-developers.com/showthread.php?t=310831 but nothing.
Here's the thing, after I load the rom the screen says:
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Any help I would really apreciated. If you want I can donate too.
Thanks
Click to expand...
Click to collapse
You already got IPL 1.xx,there's no need to flash back to Button's Rom,just try to CID unlock with WST Tool,hope it'll work out.
I tried that but the thing is when i turn on the device it comes up with a screen and the info I've said before. It doesn't go anywhere else. Just to that screen that have this info in red colored.
and everytime i want to flash a rom into it, the device says flashing from language cingular, and it never changes. How can i put it back to factory default?
Thanks for all your help guys, I couldn't fix it so I sold it as is.
I really appreciate what you have done.
If there is anything I could do, let me know.
Have a great one....
First enter bootloader by pressing Camera+reset. After enter the tri-color screen, flash with Button's ROM.
Hello, I'm new here and I really need your help..
I downloaded the latest rom from t-mobile for my htc charmer and it just stands there on a boot screen showing:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
I've searched and tried everything on this forum and nothing will work. I tried flashing back first official rom but I got an error message saying upgrade only, you need newer nk.nbf also with ROM update utility no id but it only changes my IPL not SPL GSM and OS. I can enter into a bootloader but I don't know what to do now because like I said I tried everything on this forum.
Please help, any suggestion will be usefull, I'm without a phone now..