[Q] A2DP streamning to Dension Gateway BT - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi!
I have installed a Dension Gateway 500s BT in my Audi A6 and streaming music (like spotify) from my friends Iphone 4s via Bluetooth works like a charm. When i try my Samsung galaxy s whit CM 10 (from 14-oct) im not getting any sound out of it. I have used my phone earlier for Bluetooth headset communication whit my audi and it works but now i just se the call in my car but the sound is stuck in my galaxy. Any suggestions to this? i have red about the bit rate and according to dension manual it should be 41000 and i have chekt my audio_policy.conf for A2DP and its sample_rate is 41000. i dont know if this issue is related: http://miuiandroid.com/community/threads/bluetooth-a2dp-streaming.18121/. Could it be i have to try a diffrent kernel?
Any suggestions appreciated!

Did you ever figure this out? Im' looking at buying a Dension adapter and need it to work with android.

Related

Nokia Bluetooth Car kit with HP6315

I know this is for only XDA devices, & I tried searching but I didnt see anything except for 1 post. http://forum.xda-developers.com/viewtopic.php?t=11128&highlight=nokia+car+kit
But I thought I might try you guys here.
I have posted on other HP related sites as well for the same problem.
This site was so usefull when I had my Siemens SX56.
The only thing I wanted to know is if anyone knows if there is any add on driver I can add to it to make the hp6315 bond with my nokia bluetooth carkit model # CARK112.
I cant seem to get it to bond?
I did get my Jabra BT200 to bond and work correctly.
This is what nokia says about it?
*Compatible phones must support the Bluetooth 1.1 specification and Handsfree profile.
As far as I know the hp 6315 doesn't support handsfree only headset?
Any help would be greatly appreciated.
...have you tried the "explore a BT device" in the BT connection wizard, not the "handsfree/headset" set-up? I paired it together once & it worked fine...I do beleive this "widcomm stack of BT" supports handsfree...
BTW, after I added another headset (my SE HBH-65) it didn't connect again, but BT is funny/finicky doing multi-device connxns...
Nokia Carkit with HP6315??????
Thanks , I will try that I will let you know.
...another tip...even better tyhan the last one that I don't think is necessary if you use this one : when pairing h-set/handsfree device about half way thru the wizard hit the tools button (I think?) & it default-checks, "show only handsfree devices", uncheck that & you should now see the carkit show-up! This of course makes no sense since the carkit is a handsfree device but it seems to work so go with it...
thanks that did the trick!!!!!!
I just yest spent some extended time with CarKit (it in my wife's car) & it wasn't very reliable. After turning the car off & then back on it would not re-establish a pairing. After resetting both iPaq & carkit (turning off & on again, I'd go thru the wizard again & it would re-establish but would duplicate the carkit on the iPaq...
Has your kit been more reliable? (I have the nokia Cark112)
nokia car kit with ipaq
No. mine has been doing the same thing.
...ya, my work around has been to delete the previous carkit pairing & re-establish itself - a new one - obviously not great but workable if you need it...btw, every Nokia phone (even the newest ones) work fine with this kit...so who knows - I may get the Nokia 9500...

wifi killing bluetooth?

hrm this isnt good - it would appear bluetooth stops working when wifi is enabled - was listening to an mp3 on bt stereo headphones and enabled wifi and it killed the conn - not only that it seems i cant use any form of bt device if wifi is enabled (not even connected) on the device - wtf?
is anyone else experiencing this?
No, I use Jawbone BT headset with all sounds out BT using BTaudio.exe then start WiFi on home LAN and watch streaming video from Slingbox.
this was the case with the titan...
eric b
do i have a faulty unit?
i don't think so. in the titan, the bluetooth and wifi antennae were the same actual unit.
eric b
you sure? remE says both work at the same time just fine for him :s
to me it seems as thought ewifi signal is overpowering the bluetooth or smt - does the bluetooth freq lie in the wifi freq range or smt? is there any way they could overlap?
both work if i have only one on at a time - can anyone confirm either way if both work at the same time for them and what equipment youre using?
I'm doing it as a type this. I'm watching 30fps video streaming at 300k over WiFi and listening to it thru a Jawbone BT headset. For sure this works fine.
I have a Hermes and it would not do this well at all, it would allow BT and 3G video streaming but not WiFi. Kaiser can handle it.
maybe you could try a differet BT headset, maybe yours suffers from inteference ( i don't know the frequencies of BT and WiFi but WiFI could be killing the connection because your headset jamms)
BT and WiFi are both spread specktrum radios operating at 2.4ghz. They are designed to co-exist and do so on Kaiser. Maybe there is a difference with Stereo vs Mono headsets, they do use different BT profiles. If I get a chance I'll try a stereo set and report back.
thanks guys - i need to make sure my unit is duff before i ssend it back for a replacement ;(
looks like my unit is gonna go back - i called htc and they said they havent heard of this issue before and are 'escalating it' - it seems that superetrader wont give me an RMA for my unit until htc have given me a reference number - is this normal procedure? seems a bit odd to me
i tested my unit some more at work today with a whole host of different bluetooth and wifi gadgets and the problem is consistently reproducable
gutted

Parrot Carkit and Bluetooth

My TyTnll is a great device, but there's only one problem: I can pair it with the Parrot carkit integrated in my Kenwood Carsystem, but within 1 or 2 minutes after my first call my device disconnects. Then I have to switch my carsystem off and on again to establish a new connection. I've tried several ROM versions. Who recognizes this problem and who knows how to solve it ?
What model of Parrot are you using?
I have a 3100 and a change of firmware was all that was required.
See here http://forum.xda-developers.com/showthread.php?t=382212&highlight=parrot
I have the 3000 evolution and all ok. Just pair and that´s it. What is your model?
Regards
It should be a Pafrrot CK505X, but it could be modified because it's integrated in my Kenwood DNX5220BT Car system.

[Q] Samsung Galaxy S Bluetooth Audio A2DP Problems

Hi Guys, Newbie here in need of some help.
I have searched high and low for an answer to this and whilst people have had similar issues, none quite the same and as such I have not been able to fix it yet.
Basically I have a Galaxy S which I bought about 6 months ago. It is running Android 2.2 Froyo 'Firmware version' 2.2.1. (let me know if you need any more info on build etc).
The problem is that I bought a Belkin Bluetooth Music Reciever so I could play music remotely from my phone to my stereo.
I made sure I carefully read the reviews and some bloke called Dan who is a regular reviewer had tested it with the Samsung Galaxy S so I thought I was all set.
I can send you the links to see the item and the review if you like.
However when I followed the Belkin's instructions the phone was supposed to ask me to enter 0000 to complete the pairing. The phone seemed to pair automatically, without asking for a code. So I assumed everything was fine. but then the music came out the phones loud speaker rather than the stereo.
I have also noticed that whilst the phone pairs with the BT reciever, it doesn't seem to connect.
I have successfully used the Belkin with my wife's 18 month old Sony Ericsson C905 and an HTC Desire so I know the Belkin works. I just reckon there is a glitch which is stopping me pair with it properly.
The remedies I have tried:
1) Unparing and Re-Pairing Bluetooth
2) Rebooting Phone, Rebooting Belkin
3) Going into Bluetooth Options and selecting Play Audio via Bluetooth. (When I also press the 'Connect Now' tick box, it tries and fails although it does still think it is paired.
4) I also double checked to see if there was a firmware update for the phone via Kies and there was so I installed that and it still won't work.
5) Samsung Support have simply said -"It must be a compatibility issue and we can't help you." - if that was so, how come someone else used a Galaxy S when reviewing it!?
This is driving me insane! Can anyone help me with this? Any help appreciated.
It's probably not much help, but as a datum I'm using some sennhieser PX 360 A2DP bluetooth headphones with my i9000 and they're fine. I didn't have to enter a pairing code as 0000 is the default for accessories these days and it's automatic
Sent from my GT-I9000 using XDA App
HarpingOn said:
It's probably not much help, but as a datum I'm using some sennhieser PX 360 A2DP bluetooth headphones with my i9000 and they're fine. I didn't have to enter a pairing code as 0000 is the default for accessories these days and it's automatic
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks HarpingOn,
So the plot thickens then...
Can anyone help?
I had a problem recently where I thought my Galaxy S had stopped pairing properly with my Motorola T505 - the music playing bit worked fine, but the phone connection, voice dialling etc just wouldn't work at all.
Turned out I'd left the bluetooth on on my work phone (old Nokia) and that was connecting preferentially as that was the last thing connected. Once I turned that off it all worked again. Don't suppose there's anything like that happening?
Barkotron said:
I had a problem recently where I thought my Galaxy S had stopped pairing properly with my Motorola T505 - the music playing bit worked fine, but the phone connection, voice dialling etc just wouldn't work at all.
Turned out I'd left the bluetooth on on my work phone (old Nokia) and that was connecting preferentially as that was the last thing connected. Once I turned that off it all worked again. Don't suppose there's anything like that happening?
Click to expand...
Click to collapse
Thanks Barkotron, its a good thought but I don't think there is anything that would cause it. The nearest other bluetooth device which is switch on is the B/T keyboard for my iMac which is upstairs at the other end of the house.
Stumped!
Bump...any ideas?
Same problem here with a BeeWi BBR100-A1.
Device works fine with a iPhone 3GS but not with my i9000. Don´t know why and where to search. Installing now the Android SDK and hopefully there is a errorlog.
I have the same problems that you describe, pairing starts - the BBR100 restarts and it looks like the pairing fails. Galaxy S i9000 displays that it is connected to the bluetooth receiver...
That sucks!
Belkin was my backup, but now end of all hope.
Looks like it´s a problem with the BT-Stack, with my Senheiser MM100 it works just like a charm!
Any news or tips with another receiver?
I tried with a Creative bluetooth speaker in a shop today. No pairing code required.
One thing I did notice though, I had to pair the Galaxy with the Creative speaker, then go back into the bluetooth devices list and select the speaker to connect it. The audio then switched from the built in speaker to the bluetooth device.
I have to do this with my headphones too. The devices automatically pair when the headphones are powered on but the headphones don't produce sound until I also go to the bluetooth list and connect them.
Hope it helps.
Sent from my GT-I9000 using that XDA App thingie
All I tried ends up with more questionmarks then before.
1. HCITOOL
Downloading and copying hciconfig, hidd and hcitool to /system/xbin and set it to 755. Doing a hcitool scan and recieved:
#hcitool scan
Device is not aailable: No such device
Trying a hcitool dev and get "Devices: "
Looks and sounds like that samsung modified the bluez
Installing Android SDK and doing a logcat getting:
Code:
I/BTL-IFS ( 4253): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTR
L) 11 pbytes (hdl 19)
W/BTLD ( 4253): btui_security_cback( LINK FAILURE:: hci status: 22) 8==link super to
W/BTLD ( 4253): for bd_addr: x00:x18:x96:xa0:xy:xx
I/DTUN_CLNT( 4273): dtun-rx signal [DTUN_SIG_DM_LINK_DOWN] (id 48) len 13
D/DTUN_HCID4( 4273): dtun_dm_sig_link_down()
I/DTUN_HCID4( 4273): dtun_dm_sig_link_down device = 0xeca8 handle = 274 reason =
22
I/BluetoothEventLoop.cpp( 2713): event_filter: Received signal org.bluez.Device:
PropertyChanged from /org/bluez/4273/hci0/dev_00_18_96_A0_xx_xx
D/BluetoothEventLoop( 2713): Device property changed:00:18:96:A0:xx:xx property:
Disconnected
D/BT HSHFP( 2808): Received intent Intent { act=android.bluetooth.device.action.
ACL_DISCONNECTED (has extras) }
I/BT HSHFP( 2808): ACL disconnected
I/BluetoothService( 2713): ACL disconnected, mAclLinkCount = 0
D/BluetoothA2dpService( 2713): Received intent Intent { act=android.bluetooth.de
vice.action.ACL_DISCONNECTED (has extras) }
I/BluetoothHIDService( 2713): Received intent Intent { act=android.bluetooth.dev
ice.action.ACL_DISCONNECTED (has extras) }, device = 00:18:96:A0:xx:xx
I/BluetoothHIDService( 2713): ...ACL disconnected
can somebody make sense out of this?
Only thing I see is the ACL disconnect and the line:
W/BTLD ( 4253): btui_security_cback( LINK FAILURE:: hci status: 22) 8==link super to
please guys?
A2DP problem with JS5?
Until recently i was using a2dp to connect my sgs to my handsfree car kit and listen to music: it worked perfectly and the sound was great. Then i upgraded from JPF to JS5 (stock rom from samfirmware), and now music is always jumping forward. Normal connection for answering calls works perfectly...
sounds like another problem...because pairing works for you...right?
but anyway, there must be a way to change the bluetooth-stack like the windows way...
I have this problem too, pairing works but no sound via bluetooth. I am on JS3.
Edit: IT IS WORKING!
Unpaired and paired again. Works like a charm.
Sent from xda-powered Galaxy S
Slightly tangentially, do we know if the Galaxy S is supporting the Apt-X A2DP codec? The galaxy sounds better than my iPod touch using Apt-X headphones, but it could be something else making the difference
Sent from my GT-I9000 using that XDA App thingie
Mhm, hopefully I can do some more search this weekend.
Searching around the i-net brings some threads with the blueZ (bluetooth-stack) from canonical. Some people say that Samsung has modified the stack. Hopefully cyanogenmod brings a solution, afair. they use another stack then the stock rom.
@HarpingOn:
My old iPhone 3G and a iPhone 3GS works with the BeeWi BBR100 perfectly, but the new SGS not....???....so your suggestion with apt-x could be a idea, but why the hell SGS pairs and plays music over my Senheiser MM100?
More questions then ever, but I don´t have a clue what could it be. Thats the damn old problem with IT. If you don´t know where exactly the problem is you can´t fix it.
Today I unpaired the phone, reseted the car kit, paired again, and it's working ok. Sound is not as good as before, but may be it's just some equalizer setting. If this procedure doesn't work for you, try a phone factory reset.
I can confirm that everything is working ok. Unpair and reset did the trick for me.
Don´t work here... same as before.
Pairing seems to work, but finally you notice that it wan´t pair correct.
Bump
I have the same problem with the Belkin Music Player - has anybody found a solution ?
I have send my problem to BeeWi with complete error log and all other things that I have found.
Their reply:
Dear sir,
We have tested BBR100 on galaxy S and it works perfectly.
Easy pairing without entering 0000 code. After pairing you need of course to ask for connection because Android phones don't connect automatically.
Best Regards,
BeeWi
-> I´ve got a solution, send BBR100 back to sender and buy a cable. Works now for me!
I also have had the problem to connect the Belkin BT media streamer but just got it to work!
My solution
1. Pair ( When I do this at first I get the same problem as many others, the SGS pairs but does'nt connect).
2. Unpair the devices
3. Pair again - now it also will connect.
4. The music plays trough my bluetooth to my stereo.
The only problem for me now is that the sound really SUCKS. No bass what so ever etc. Any1 knows how this could be fixed?

[Q] Bluetooth - A2DP missing.

Hi all,
I have just bought a Bluetooth car kit/audio streamer. It pairs o.k. but is only showing up as a car kit - suitable for answering the phone only. Is there any way to add the A2DP profile to this device? I know A2DP is setup and working o.k. because I have already one device that works just fine for streaming audio. I have deleted this just in case it was conflicting but this did not help.
Anyone got any ideas what to try next ... Google is not much help on the matter?
OurKev

Categories

Resources