Ever since the AT&T OTA screwed up my Bluetooth and wifi, I've been trying to S-off so I can try a few ROMs. I have a bread bag twist tie, stripped at either end. I have VERY good dexterity. It does the USB beeps when I touch the wire ends where I'm supposed to. But after doing it somewhere around 75 times (give or take) it STILL says "sober".
WTF? I mean there is only really ONE way to do this, right?
Someone tell me what is going on when it says (1/45). The highest I've got to is 10/45. Usually it gets to 4, 6, 8.... sometimes 9. On and most of the time it only asks me to touch the wire once. If I start ControlBear while the phone is recovered and booted up into Android normally, it usually has me touch the wire a handful of times. But the result is the same, NO S-OFF.
Telling me "keep trying" isn't going to help me, nor is "get a good wire", because I've done both now.
Dunno man. It's worked for everybody else. Try re watching the tutorial video and look at the diagram closely. With zoom if possible.
It's a very specific spot on a tiny piece of hardware. Follow the instructions and you'll be fine.
On the other hand though, s-off isn't actually necessary for MOST ROMs unless you don't have a computer handy to fastboot flash the boot.img. Some ROMs do require it though. AFAIK s-off only allows the kernel to be flashed in recovery.
Sent from my HTC PH39100 using xda premium
Edit: The x/45 just means you're not drunk enough aka not doing the process correctly.
What beeps? may vuvud made no beeps when i did s-off...you sure your getting the right spot?
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
I found I had to touch the wire, hold it for around a second, lift it quickly, then touch it again. Took a few times to get the timing, but it wasn't bad. Before I did the on-off-on, I tried about 15 times with no effect. Then it only took 2 or 3 tried with the on-off-on.
Hopefully that will help.
ess.boyer said:
I found I had to touch the wire, hold it for around a second, lift it quickly, then touch it again. Took a few times to get the timing, but it wasn't bad. Before I did the on-off-on, I tried about 15 times with no effect. Then it only took 2 or 3 tried with the on-off-on.
Hopefully that will help.
Click to expand...
Click to collapse
AHhhh THAT WORKED.
Let me provide my own thoughts on this so when other people search and find this thread, they get a bit more input.
First, they are right. Doing it with a piece of stranded wire won't work, even if you twist the ends really tight. A twist-tie is perfect. A paperclip (the smaller size) could work but won't be as comfortable a a wire you can bend and move easier.
Second, you don't need to first touch the ground and then the contact dot as the instructions say. I found it easier to keep the contact-dot end (the part under the cover with the "VOID" decal) already touching, and hover the other end of the wire over the ground spot at the SD slot. Just made the dexterity of this much easier.
Third, what he said about timing is important, and SO is the lift and retouch part. That's what did it for me (finally!). Like ess.boyer said, when the program says to do the wire trick now (with !!! lol), do it immediately, hold it for closer to 2 seconds (not 1.5). Then release the ground end (at the SD slot), and then RE-TOUCH THE GROUND END again for 1 second.
Something to note... the (1/45) thing... it counts down. What they DON'T tell you is that it isn't a number of items being performed. It's just a sort of timer. So don't worry about it. TRUST ME, it's all in the touch and timing like they said, so hopefully my post here adds to all the others and helps people in the future.
But yes, I am now S-off. OH, and as another note, it DID re-lock the boot loader., SO... I had to to go through the HTCdev unlock process again (with copying and pasting the token).
Now I just need to get ahold of WC's goods. Which seems to be difficult now :/
Suleeto said:
AHhhh THAT WORKED.
Let me provide my own thoughts on this so when other people search and find this thread, they get a bit more input.
First, they are right. Doing it with a piece of stranded wire won't work, even if you twist the ends really tight. A twist-tie is perfect. A paperclip (the smaller size) could work but won't be as comfortable a a wire you can bend and move easier.
Second, you don't need to first touch the ground and then the contact dot as the instructions say. I found it easier to keep the contact-dot end (the part under the cover with the "VOID" decal) already touching, and hover the other end of the wire over the ground spot at the SD slot. Just made the dexterity of this much easier.
Third, what he said about timing is important, and SO is the lift and retouch part. That's what did it for me (finally!). Like ess.boyer said, when the program says to do the wire trick now (with !!! lol), do it immediately, hold it for closer to 2 seconds (not 1.5). Then release the ground end (at the SD slot), and then RE-TOUCH THE GROUND END again for 1 second.
Something to note... the (1/45) thing... it counts down. What they DON'T tell you is that it isn't a number of items being performed. It's just a sort of timer. So don't worry about it. TRUST ME, it's all in the touch and timing like they said, so hopefully my post here adds to all the others and helps people in the future.
But yes, I am now S-off. OH, and as another note, it DID re-lock the boot loader., SO... I had to to go through the HTCdev unlock process again (with copying and pasting the token).
Now I just need to get ahold of WC's goods. Which seems to be difficult now :/
Click to expand...
Click to collapse
your not supposed to re-unlock the bootloader dude.. you screwed up there. once your s-off your good READ before messing with your **** lol. else you might screw it up next time. i'd run ruu and redo just to be safe
XxSHaDoWxSLaYeRxX said:
your not supposed to re-unlock the bootloader dude.. you screwed up there. once your s-off your good READ before messing with your **** lol. else you might screw it up next time. i'd run ruu and redo just to be safe
Click to expand...
Click to collapse
Running a ruu won't undo soff so there's no point in doing that then redoing the soff process
It doesn't matter if you unlock it again or leave it locked...if you want to fast boot anything (kernel...recovery...) your gonna end up needing to unlock...discovered that after flashing wcx a while back and finding that it didn't support soff kernel flashing
Sent from a guy that is soff, and unlocked the boot loader immediately after the soff process and has unlocked and relocked the boot loader countless times since the soff process in order to run ruus and get recoveries...so basically he did not screw up there
Sent from my SGH-I997 using Tapatalk 2
XxSHaDoWxSLaYeRxX said:
your not supposed to re-unlock the bootloader dude.. you screwed up there. once your s-off your good READ before messing with your **** lol. else you might screw it up next time. i'd run ruu and redo just to be safe
Click to expand...
Click to collapse
What are you on about? You can re-lock and unlock whenever you want. You need to relock to install any ruu. Locking and unlocking won't hurt anything. It also has no bearing on s-off.
If he's up and running, why on earth should he reflash an ruu?
Sent from my HTC Raider using xda premium
Related
Now i know once you unlock your bootloader it shows a small lock of the splack screen, correct??
Well how in depth does HTC really go into figuring out if you have rooted the phone or not for, lets say, a repair?
Because i also know that they "say" they will wave the voided warrenty for a dust problem but I've also seen problems with them failing to go through with that.
So could we theoretically just change the splash screen (or boot 2 i think it is) to the original splash screen without the lock and maybe slip by HTC's warranty?
Now if this seems illegal or something I'm terribly sorry, i just want to have a way for people who rooted to get the "full" experience to have a fall back if we dont figure out how to re-lock, or if they just simply damage the phone.
They have the power to bring a bricked phone back from the dead, how far do you think they can go?
Yes, but...
Yes, i know they could really do anything they want. (even replace the phone) But how far do they WANT to go...Do you see?
I mean why would they waste their time trying to see if your rooted or not, unless they check EVERY single phone no matter what...
Every phone gets checked. All they have to do is plug it in to their test beds, which they do to every phone. They also check every phone for water damage, and not just the white dot in the battery bay, they have others hidden throughout the phone.
The SPL won't let you flash the splash over it
Alrighty
Okay, thats all i wanted to know. I just thought maybe they didnt check every phone, maybe they used a different computer or something to check for root and they just used a simple technique for a damage check.
I do know that we cant flash the splach but im sure it will be soon to come, and by that time i'm sure we will be able to relock anyways...
sassyness77 said:
Okay, thats all i wanted to know. I just thought maybe they didnt check every phone, maybe they used a different computer or something to check for root and they just used a simple technique for a damage check.
I do know that we cant flash the splach but im sure it will be soon to come, and by that time i'm sure we will be able to relock anyways...
Click to expand...
Click to collapse
Maybe... what we need is someone to leak a signed .nbh of the SPL. That is the golden ticket to being able to re-lock.
It even says unlocked in the bootloader.
pjcforpres said:
Every phone gets checked. All they have to do is plug it in to their test beds, which they do to every phone. They also check every phone for water damage, and not just the white dot in the battery bay, they have others hidden throughout the phone.
Click to expand...
Click to collapse
There's a white dot on the battery bay? You actually got me curious, as installing my full body skin i did get my phone quite wet. I can't find this white dot that you are talking about.
I had to send my phone recently for a repair and it was rooted. They not only accepted it, they sent me a brand new nexus within the week. I don't think they have time to check out each and every phone for something that trivial. This isn't Apple!
hmarcus said:
I had to send my phone recently for a repair and it was rooted. They not only accepted it, they sent me a brand new nexus within the week. I don't think they have time to check out each and every phone for something that trivial. This isn't Apple!
Click to expand...
Click to collapse
very nice! -congrats!
All they have to do is power on the phone and they can see if the bootloader is unlocked. That's all they need to void the warranty. Fortunately for you guys, they haven't started following through with that... yet.
I had an idea but dont know if it will work... change the boot animation/screen to a white(the lock icon color) screen, the lock will not be visible because its also white. The tech ppl will think its part of the malfunction...
hmmmm
I think you're thinking the same thing as me sort of, as I stated befor maybe when we figure out how to change the splash screen we could replace it with one without the lock icon.
sassyness77 said:
I think you're thinking the same thing as me sort of, as I stated befor maybe when we figure out how to change the splash screen we could replace it with one without the lock icon.
Click to expand...
Click to collapse
Dont think its part of the screen, its an overlay.
britoso said:
Dont think its part of the screen, its an overlay.
Click to expand...
Click to collapse
I wonder if simply changing that would be enough to "fool" HTC. If so then that would be quite sad.. sad as in pathetic. I would assume they would run more extensive test.
Eclair~ said:
I wonder if simply changing that would be enough to "fool" HTC. If so then that would be quite sad.. sad as in pathetic. I would assume they would run more extensive test.
Click to expand...
Click to collapse
They could even go as far as pressing the trackball down when turning it on. and seeing *** UNLOCKED *** in small, friendly letters inside the bootloader menu.
Oh nice liam, I didn't know that.. I don't even have a Nexus so obviously I wouldnt. Kinda embarassing.. I was being so radical to be responded to with a simple answer.
I realize this has probably been posted and resolved but I cannot find any solutions yet. So here's the deal:
My fiancee dropped ger G1 into the toilet abot 2 months back or so. I was cleaning and stumbled across it and figured I would check and see if it had dried out okay or not. It is a non rooted black G1 running android 1.6. I tried a coupke of things and figured out I can turn it on now but it goes directly to the bootloader screen. I have ran the DREAIMG.nbh for rc29 and it will update it okay no problems. The issue is that after a soft boot(? Is that the right phrase?) By pushing menu power and call that it boots up...and goes right back into bootloader and tried to run the rc29 update again.
Has anyone else stumbled across this problem and if so how did you solve it? It boots into the factory recovery fine also and will run update.zip files but then once again boots directly to bootloader.
I am trying different things and tweaking here and there because I have a pretty strong feeling this isn't impossible. I'm just overlooking something I'm sure. If this issue has been resolved can someone post the link to the thread or even pm me and give me ideas here. I'm trying to root it since it seems the operating system is shot as is.
-------------------------------------
Sent via the XDA Tapatalk App
Water-Logged
Geoi1006 said:
I realize this has probably been posted and resolved but I cannot find any solutions yet. So here's the deal:
My fiancee dropped ger G1 into the toilet abot 2 months back or so. I was cleaning and stumbled across it and figured I would check and see if it had dried out okay or not. It is a non rooted black G1 running android 1.6. I tried a coupke of things and figured out I can turn it on now but it goes directly to the bootloader screen. I have ran the DREAIMG.nbh for rc29 and it will update it okay no problems. The issue is that after a soft boot(? Is that the right phrase?) By pushing menu power and call that it boots up...and goes right back into bootloader and tried to run the rc29 update again.
Has anyone else stumbled across this problem and if so how did you solve it? It boots into the factory recovery fine also and will run update.zip files but then once again boots directly to bootloader.
I am trying different things and tweaking here and there because I have a pretty strong feeling this isn't impossible. I'm just overlooking something I'm sure. If this issue has been resolved can someone post the link to the thread or even pm me and give me ideas here. I'm trying to root it since it seems the operating system is shot as is.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
the reason it goes into the bootloader is most likely that there is still moisture under the keys .. my friend had the same situation .. the keys were constantly making contact and thus went wherever the keys led .. for instance: a stuck home key would get you into recovery .. a stuck back key gets into bootloader .. it takes quite a lot of effort and patience but if you can completely dry out the insides you should get it functioning again
Also, im pretty sure the G1 goes into the bootloader if there is a hardware failure(like the radio is not responding).
And how the hell did your fiance drop her G1 into the toilet? She better be hot because she sure as hell doesnt seem smart.
kingkurry said:
Also, im pretty sure the G1 goes into the bootloader if there is a hardware failure(like the radio is not responding).
And how the hell did your fiance drop her G1 into the toilet? She better be hot because she sure as hell doesnt seem smart.
Click to expand...
Click to collapse
Happens to a lot of people...Kind of a rude statement for you to make about his fiance. On another note, OP, did you try burying the G1 in a bowl of rice (uncooked of course) and leaving it for a few days and then trying again. That has never failed me.
G1ForFun said:
Happens to a lot of people...Kind of a rude statement for you to make about his fiance. On another note, OP, did you try burying the G1 in a bowl of rice (uncooked of course) and leaving it for a few days and then trying again. That has never failed me.
Click to expand...
Click to collapse
+1.... the rice trick usually works as long as you haven't messed around with it too much while it is wet.
make sure you remove the battery, sdcard and sim card so the rice can absorb more water too
Jeffro64 said:
+1.... the rice trick usually works as long as you haven't messed around with it too much while it is wet.
Click to expand...
Click to collapse
Yup, I had a friend that dropped a G1 into a toilet months ago. He took everything apart you can take apart ie battery cover, battery, sim, SD card etc.. and he put it in a bowl of rice for 3 days. It's worked fine ever since..
you could get isopropanol ;D thats pure alcohol, then put the lower side of the g1 into a cup of that and let it dry for ~1 day. if that doesnt work i dont know how to go further ;D
Wrong section.
Jeffro64 said:
+1.... the rice trick usually works as long as you haven't messed around with it too much while it is wet.
Click to expand...
Click to collapse
Double ditto on the rice. Instead of a bowl, though, I recommend a ziplock plastic bag. That way no additional moisture is getting the attention from the rice.
We did this with my wife's old phone, worked like a goddamn charm. I was amazed.
+5 on the rice idea. did that a long time ago with my brothers G1. He jumped into a lake after a discgolf disc. more worried about losing a $20 disc than a $300 phone. (We both pre-ordered the phone and i think thats how much it was.)
To be honest, there really is no point. The fact that its been like 2 months means most of them moisture should be gone. The reason the phone is going into the bootloader is because of a hardware failure. When the phone boots(the G1 screen) it runs hardware diagnostics. If there is a failure(which there is probably due to toilet water corrosion) it will go into the bootloader.
Anyway, forget the g1. She is your fiance ffs. Buy her something nice, like a MT Slide, or a Nexus
Let this be a lesson to all of you that get your phones wet. immediately after they get wet, remove the batteries, and submerge the phone in alcohol. Then put the phone in a ziploc bag with LOTS of silica gel packets. Leave in bag for 2 days.
Another story related on a french G1 forum :
A guy helped his sister to move. Exhausted, he went to the balcony to smoke and take a deep breath. While he was taking his cigarettes out of his pants, he realized he had also hung his G1, which fell from the 4th floor.
Sick of what occured, he went down to get his G1 back. Hopefully and even supernaturally, the screen was intact. Even more, when he tried to turn it on, he saw the G1 screen. It booted normally, and everything was working perfectly !!
Surprising, isn't it ?
That's why the HTC Dream (G1) is Magic (MT3G) !!
Lol I am getting her the mt slide next week lol. And in regards to "she doesn't sound very smart"... My fiancee works in assisted living and doesn't have much downtime. If you really need details(and why would you?) It fell out of her scrub pocket where you'd think it'd be safe at. S*** happens lol no need to say what was said.
My friend who has helped me rescue my phone a couple of times in my early rooting days recommended the rice bowl idea. Furthermore the phone doesn't boot into the G1 screen then to bootloader. Its going straight to bootloader. If its a radio problem is it possible to go thru and rename the current G1 radio to update.zip and flash it in recovery? Then the danger spl(which I have all saved on my pc from my rooting my G1). Thoughts? Ideas?
And thanks for the help guys btw
-------------------------------------
Sent via the XDA Tapatalk App
The rice trick won't help you anymore as there should be no moisture left after all that time. If you can disassemble it, clean it's guts with alcohol to get rid of shorts and it should probably be fine
Geoi1006 said:
Lol I am getting her the mt slide next week lol. And in regards to "she doesn't sound very smart"... My fiancee works in assisted living and doesn't have much downtime. If you really need details(and why would you?) It fell out of her scrub pocket where you'd think it'd be safe at. S*** happens lol no need to say what was said.
My friend who has helped me rescue my phone a couple of times in my early rooting days recommended the rice bowl idea. Furthermore the phone doesn't boot into the G1 screen then to bootloader. Its going straight to bootloader. If its a radio problem is it possible to go thru and rename the current G1 radio to update.zip and flash it in recovery? Then the danger spl(which I have all saved on my pc from my rooting my G1). Thoughts? Ideas?
And thanks for the help guys btw
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Hey dude, sorry about the "she doesn't sound very smart." I was just trying to make a joke but I now realize that it was pretty rude. No need to explain. Also, when i said that, I didn't consider the fact that girls need to sit down to pee.
Now if a dude did that, that would be stupid.
kingkurry said:
Now if a dude did that, that would be stupid.
Click to expand...
Click to collapse
LOL. Now you trying to say that girls are stupid?
It is better for you to just say sorry and don't reply again.
kingkurry said:
Also, im pretty sure the G1 goes into the bootloader if there is a hardware failure(like the radio is not responding).
And how the hell did your fiance drop her G1 into the toilet? She better be hot because she sure as hell doesnt seem smart.
Click to expand...
Click to collapse
heh i know this smoking hot blonde that dropped her blackberry in the toilet your logic is true cause she is not that smart.
She ended up getting a droid so there must be something ticking up there.
ionic7 said:
heh i know this smoking hot blonde that dropped her blackberry in the toilet your logic is true cause she is not that smart.
She ended up getting a droid so there must be something ticking up there.
Click to expand...
Click to collapse
Either that or she buys everything advertisements tell her to
I know an amazing looking girl whos boyfriend dropped her iPhone in the bath after he left it sitting on the side.
Don't always assume that men are smarter than women.
Hello. Yes, I'm a noob. I watched video, and also have been trying to find a solution for last three days. I just really am unsure where to even start!!.... :silly:
I just purchased this Samsung Galaxy Tab:
ebay. com/itm/Samsung-Galaxy-Tab-w-Otter-Box-Charger-3G-SPH-P100-/140863908008?_trksid=p2047675.l2557&ssPageName=STRK:MEWNX:IT&nma=true&si=zdNnh%2F8hBkAfClqVXbmhnrVFeI4%3D&orig_cvip=true&rt=nc
(Sorry I can not link without spaces)
I have no SD card.
This is Sprint version of Tab, though I'm not sure if that is still attached to the tab.
I do not know if this is rooted (item description does not say anything about that, but I'm guessing it is..)
Received it, charged it, tried to turn it on, and it loops the glowing Samsung boot screen.
I tried to load in recovery mode and the attached image is the screen that I get. fails to mount anything!
(again tried to link to image also but not allowed )
I downloaded both kies and odin but can"t seem to connect the tab to the PC? I have never used any of these programs and was just not expecting to need to so soon.
I'm not trying to do anything fancy just yet, just want to be able to turn the tab on!!
I have searched these forums, and others, youtube, can't seem to find my exact problem and getting to be at wit's end..
I used to be pretty tech savvy but haven't done much dealings in last few years so rusty. And I have never had any kind of smart phone or tab before and so I'm just a bit nervous on where to start or to do anything because I think it is good that it at least still turns on?? Don't want to worsen the problem.
I am just between trying to resolve this matter, if it is possible or if nothing is possible, attempting to use the ebay buyer protection but i'd rather it not come to that! (also why I haven't made any changes just yet)
I do not have any other communication device at the moment, was kind of relying on this tab for work, and don't have time or money to spend waiting for that to go through plus a replacement unless I have absolutely no choice.. :crying:
I would be eternally grateful for any help in what direction to go. If I could JUST get a jump start I think I tend to pick things up alright.. as far as development goes. Just off to a bad start with this tab and pretty please if you don't mind give me some reassurance (and maybe some links) that it will be okay :victory::highfive:
Probably has been rooted. Boot into recovery ( power volume up ). Press vol up and power. Once the tab starts, keep your finger on volume up and quit the power button. Once you are in recovery, take a picture of the screen and post here.
glussier said:
Probably has been rooted. Boot into recovery ( power volume up ). Press vol up and power. Once the tab starts, keep your finger on volume up and quit the power button. Once you are in recovery, take a picture of the screen and post here.
Click to expand...
Click to collapse
i figured so! the attached picture in the original post is from holding the volume up button while powering on. that is supposed to be in recovery mode, but there is "(No such file or directory)" for.. seems to be anything.
junoorudont said:
i figured so! the attached picture in the original post is from holding the volume up button while powering on. that is supposed to be in recovery mode, but there is "(No such file or directory)" for.. seems to be anything.
Click to expand...
Click to collapse
You may want to contact the seller before raising buyer protection.
Maybe he is willing to take it back or willing to refund you some money, then let you play with it.
I hope it is not a case of bad NAND chip.
priyana said:
You may want to contact the seller before raising buyer protection.
Maybe he is willing to take it back or willing to refund you some money, then let you play with it.
I hope it is not a case of bad NAND chip.
Click to expand...
Click to collapse
I have contacted him, though he doesn't seem to understand what is the problem either. I definitely would prefer to arrange something with him I just don't even know my options right now if that makes sense. He said he hadn't had this problem so I don't know.. because I have not done anything with it myself but open the mail and plug it in. If it was working for him correctly, the chip wouldn't be bad would it?
He had photos of the tab on running screens in his listing. Seems to be the same one.
I guess was trying to see if I even had a chance at it working regardless. I am on a very limited budget so its already been an inconvenience, but thats the risk I take buying second hand I suppose. Just trying to make the best of it any which way. I just have no idea what this screen says about the condition of the tab..
I have no ill will toward the seller just trying to find best resolution.
I'm not opposed at playing around with it, as long as I would actually have a good chance of it actually working and had a clue where to start.
Otherwise I would probably like to return it. Like I said, going the buyer protection route is worst case scenario to me. And I would not use the buyer protection after altering the programming in any way. That is also part of why I have not tried anything so far. Don't want to totally break or brick it.
I just want to turn it on. I actually hadn't even had the notion of playing with any of it whatsoever until I found I had a problem, and started researching it
or if it is fixable . (which I still do not know)
I think I have decent ethics,, mostly I'm just trying to figure out what is wrong with the tab, both for myself and / or the seller if we do happen to return the tab :fingers-crossed:
Thank you!!
I am sure you have the right ethics.
What we are worried is if he hasn't got one.
How do you know the picture is of this tab, and was the condition right before the sell?
If he is genuine, there can be a compromise. Either he take it back, or take it back to fix it and send you again (after sufficiently proof to you that it is now running, with video of him flipping it front and back next to the TV news or something, hahaha, pointing the same scratches and marks on the tab he is holding), or refund you a little money.
But if he is unwilling to compromise, and you would like to try fixing it yourself and be a good guy, then bite the bullet and try and prepare to bear the loss.
But give him no star, afterall it is his choice not to keep you happy, right?
Edit: also I have no experience with CDMA tab to try to guide you. If it were a GSM tab, at least I have some experience.
priyana said:
I am sure you have the right ethics.
What we are worried is if he hasn't got one.
How do you know the picture is of this tab, and was the condition right before the sell?
If he is genuine, there can be a compromise. Either he take it back, or take it back to fix it and send you again (after sufficiently proof to you that it is now running, with video of him flipping it front and back next to the TV news or something, hahaha, pointing the same scratches and marks on the tab he is holding), or refund you a little money.
But if he is unwilling to compromise, and you would like to try fixing it yourself and be a good guy, then bite the bullet and try and prepare to bear the loss.
But give him no star, afterall it is his choice not to keep you happy, right?
Edit: also I have no experience with CDMA tab to try to guide you. If it were a GSM tab, at least I have some experience.
Click to expand...
Click to collapse
Ah thank you anyway! I am definitely picking up what you're putting down. He has great feedback, 100% positive, or else I probably would not have ordered it, though this seems to be the only electronic type sale he's made. We will see how it goes. I believe its the same device because it included the otter box and I saw no others like it. There are virtually no scratches on it, one tiny one I found near volume buttons, but that is it. And the smear on otterbox in photo seems to match. Though there's no box on the tab in the photos in which it is running properly, they do seem to be on the same carpet as the others.
OHHH ebay I forgot why I shyed away from that website. I really was trying to be very discretionary in ordering the thing but I guess it doesn't always make a difference hahah I almost wondered if he possibly had taken the photos, then tried to wipe his data before sending, and that is where something went wrong. Who knows! I am waiting for his response to the email with photo I posted here.
Actually its relieving just to talk to someone who gives a hoot about it any which way. :highfive:
Really hope can work something out.
If you decide or have to keep this device, can you, at least, get the seller to tell you what recovery and what o/s was installed on your tab?
glussier said:
If you decide or have to keep this device, can you, at least, get the seller to tell you what recovery and what o/s was installed on your tab?
Click to expand...
Click to collapse
Thanks for suggestion. He is actually corresponding with me a little bit at a time. So I just asked him specifically what you just asked, and a few other questions regarding the tab's past, will update as soon as I find out. It is certainly more difficult with such little knowledge of the history of the item. I did receive confirmation from him that it was rooted. Nothing beyond that so far, however.
But hey on the lighter side of the situation! Haha, My trusty ol' horoscope ( -__- ) popped up and it says:
You're more in tune with the tech world than usual and now is a good time to price out gadgets for later consumption. You may want to look into stuff that doesn't quite make sense to you yet. :good:
That's a good "sign" right?
Are you sure it's not an horoscope written by the seller?
junoorudont said:
Though there's no box on the tab in the photos in which it is running properly, they do seem to be on the same carpet as the others.
Click to expand...
Click to collapse
No otter box on the one running properly!
Kind of a clue that it was an older photo?
why would he take out the otter box and run it and take a photo of it?
I am calling foul here.
He must confess and take it back.
Regards,
Hercule Poirot wannabe
Sent from my GT-P1000 using xda app-developers app
priyana said:
why would he take out the otter box and run it and take a photo of it?
Click to expand...
Click to collapse
Well, it actually isn't in the otter box for most of the photos in listing... but that's still a good point... I tried to link to the listing but being a newbie I can't post links. Just realized he is from a town named Brick.. go figure! I don't know if he'll take it back or not..because he listed no returns. So you think the tab is likely not fixable? And I may have been ripped off? Wow what a bummer....
Now wondering if there's a time limit on the buyer protection if that may be part whats taking so long.. dragging it out. As far as that goes, never used it before, but I have no feedback, just started a new account recently because I hadn't used it in 5 + years and could not remember my old one. And his 100% positive feedback, I don't know if I would have a chance anyway
If they take that in consideration..
He probably did write the horoscope. jokes on me i guess..
If you have to keep the Sprint tab, you might want to restock-it back to Gingerbread 2.3. See the following thread, if you have any questions, don't be shy: http://forum.xda-developers.com/showthread.php?t=1275031&highlight=odin+drivers
after seeing the ebay link you PM me, I do think he has reason to take photo of the tab running out of the otter box.
Initially I thought his shots was with the otter encasing the tab, except for the one that it is running. Apparently all of them are with the otter off, but the one running has no otter nearby.
Well, like in my PM, if you can go download mode, there is still chance to get it running.
The most extreme case is with a broken NAND chip, some have removed the NAND (it was glued on, can you believe that) and still run from microSD card.
There are ways, as long as it still boots to download mode/recovery.
Soon it will be your call....
Before removing the nand chip, he should try to restock like I said before and as shown in the thread link I posted.
glussier said:
Before removing the nand chip, he should try to restock like I said before and as shown in the thread link I posted.
Click to expand...
Click to collapse
Yeah, I am sure he know. I already PM him, apparently the same link as yours.
the NAND removal is the last, only if it is proven to be bad.
I forgot to mention that he should include the pit file and repartition the device, just in case.
well i haven't heard again from seller. No matter which way I go it is going to take some time and energy but I would rather not direct it toward dealing with an argument, so going to try to direct all that more positively and give this a go.
Thanks for all the advice for sure!
I am sure I will end up with some more questions at some point. Though, in spite of the fact that I don't think I should HAVE to do all this right away, as I do, I still feel okay about succeeding.. :fingers-crossed:
priyana said:
Yeah, I am sure he know. I already PM him, apparently the same link as yours.
the NAND removal is the last, only if it is proven to be bad.
Click to expand...
Click to collapse
So I have performed the tasks as posted, and made some progress (I think?), though the tab is still stuck on Samsung screen when start up normally.
Now when I load it in recovery mode I get this screen::
If you just Odin the ef17 using rodderick guide, you shouldn't even have cwm 4.0 I think...
Need someone to confirm.
Are you past that point and going for ics?
Sent from my GT-I9300 using xda app-developers app
Is there some unlock tool that I can use for this phone that does not require s/off?. I'm farily good at doing this with mother other phones but here I am feeling like a total n00b. I volunteered to do this for a friend, and after further investigating the whole thing I see I have to do a wire trick to s/off the phone just because I want to unlock it? That's outrageous, is there any other alternative whatsoever?
Call your carrier...
Pay on eBay...
Sent from my Vivid 4G using Tapatalk 2
Depends what you are trying to unlock. You can still flash roms by just using the htc unlock but s-off is easy man don't get nervous because it uses a wire
Sent from my HTC Holiday using Tapatalk 2
ZeRo2o9 said:
Depends what you are trying to unlock. You can still flash roms by just using the htc unlock but s-off is easy man don't get nervous because it uses a wire
Sent from my HTC Holiday using Tapatalk 2
Click to expand...
Click to collapse
Yeah, that's my problem.. The wire part, haha. I've unlocked over 10 phones in the past, but have never ran across the wire trick. My main issue is that it's not my phone. If it were, I wouldn't be hesitant. However, with that being said, is the wire trick dangerous, am I going to zap the phone into a brick? I mean what's the possibility of this? I've read it's safeish, but would like confirmation from some of you.
Spewed said:
Yeah, that's my problem.. The wire part, haha. I've unlocked over 10 phones in the past, but have never ran across the wire trick. My main issue is that it's not my phone. If it were, I wouldn't be hesitant. However, with that being said, is the wire trick dangerous, am I going to zap the phone into a brick? I mean what's the possibility of this? I've read it's safeish, but would like confirmation from some of you.
Click to expand...
Click to collapse
Before I get started(I'm going to take the plunge, I already explained I wasn't responsible), but I just want to confirm that the "STOCK RUU", is simply the stock rom that comes with the phone when it's purchased(noob question, yes, but be polite), also.. This HTC Dev Unlocked that mentions I need to verify that I have.. How can I verify that? Is there a different process I must undergo to receive HTC Dev Unlock before doing s-off?
Thanks.
Just trying to be extra careful since it's not my phone.
Spewed said:
Before I get started(I'm going to take the plunge, I already explained I wasn't responsible), but I just want to confirm that the "STOCK RUU", is simply the stock rom that comes with the phone when it's purchased(noob question, yes, but be polite), also.. This HTC Dev Unlocked that mentions I need to verify that I have.. How can I verify that? Is there a different process I must undergo to receive HTC Dev Unlock before doing s-off?
Thanks.
Just trying to be extra careful since it's not my phone.
Click to expand...
Click to collapse
Alright guys, I got impatient(what a great thing), and I s-offed the phone as well as sim unlocked it. Pretty easy process, the wire part is intimidating but really it was quite easy. Thanks
I flashed Android N Preview as a secondary ROM using MultiROM, everything worked perfectly, no issues what so ever.
After a day when I was listening to music using Spotify the phone suddenly switched of abruptly with battery over 90%
Since then I couldn't able to switch on the phone again.
No bootloader, no Recovery, Its not booting at all. No response from the phone.
I think it is dead.
Changed the Battery to new one.
Not worked. No sign of anything.
When I plugged in the charger the LED light is on, but I don't think its charging phone is not warm while it is plugged in.
In fact it felt like so chill.
So, I don't know how to recover my phone.
BTW, the phone's bootloader unlocked, rooted stock ROM as the primary one.
Any help would be highly appreciated.
Thanks guys.
Did you try to press the power button for 15-20 seconds? That's a weird problem.
The same happened to me.,and my phone is stock and locked. Its bricked. Nothing we tried helped
Sent from my Nexus 9 using Tapatalk
how do you change the battery on a nexus 6?
kidhudi said:
how do you change the battery on a nexus 6?
Click to expand...
Click to collapse
the back plastic sheet is held on with adhesive, I would apply heat first then work it open with a tool like isesamo or maybe a thin credit card or guitar pick. underneath there are 20 torx iirc can't remember size and another plastic shell with many holes in it. this cover, the wireless charging coil, and battery are adhered together i think and there are two small rubber covers for the power button (top) and battery (bottom). remember to disconnect your ribbon cables and treat them carefully.
the real problem imo lies in reassembly. i have repaired many and never feel they are the same as they came from the factory mostly because the back cover doesn’t re-adhere well. invest in some quality 3m adhesive, even a pre cut if you can manage.
Yeah done everything I have in my power nothing works.
Asked service center to check they said the phone is dead.
To get it repaired it will cost 3500 for me, they said.
Damn it.
Don't know what to do.
Now they said that the motherboard is dead, I need to change it inorder to get it work again.
Is it possible like this kind of problem occurs?
I was in Android N listening to Spotify
Putting a pre release OS on a phone, especially using a hack like multi rom, was indeed a recipe for disaster..
I'm certain that your partitions somehow got corrupted, and that results in a un bootable phone
Hopefully, someone reading this thread, who is thinking about doing something suicidal like that will learn from your mistake, but your phone is toast, unless you can get it J-Tagged, which might not even be available for your N6
I've heard the term j-tag a lot before. What does that mean
mikeprius said:
I've heard the term j-tag a lot before. What does that mean
Click to expand...
Click to collapse
http://www.brickedmyphone.com/products/jtag-unbrick-service/
http://easy-jtag.com/
My phone is officially dead. Service center said that the motherboard is weak and is impossible to repair and only fix is to replace the whole motherboard to a newer one. That would cost me a lot like i could get a new for it and they even suggested me to exchange this phone to a newer one.
And now i got Nexus 6P and I love it so much.
But God i really miss my Nexus 6.
Thanks for the help and suggestion here.
Long live xda.
I couldn't resist to unlock bootloader. Flash multirom and stock root and xposed.
That's the heaven, i can't live without.
I have done it all after i opened the 6P from its box. Lol.
May be i am fastest one to do it.
Thanks xda and friends from it.
Sent from my Nexus 6P using XDA-Developers mobile app