Dear Honorable Seniors, I am so obsessed to get some troubles with my htc (Touch Diamond 2).
I want to get rid off from my ROM that is already available on it (I dont how to find it is official or cooked and which is that version or name). I try to download many cooked ROMs to flash but tried two:
1-energy
2-mozart
but everytime flashing process stopped at 0% percent and after 6-7mint it display a window for recovery. I do restart my system and got the prior windows version, no flashing at all.
I thought there may be Hard-SPL issue (although I dont know what is it). I download its compatible version and try to flash Hard-SPL it also stuck at 0% and not moving upwards.
Help will be appreciated in their respect.
Sorry if my english not comprehendable I am not english speaking person.
regards,
Muqaddas Shahzad
[email protected]
+923222000048
1. Install HSPL. Follow instructions in the thread.
2. Install custom ROM.
You cannot install a ROM until you have installed HSPL first.
I think Muqaddas has already tried HSPL as he described in the post, but the progress stuck @ 0%.
Muqaddas, may be you can try below:
- Disable antivirus software, temporarily, on your PC
- Do HSPL (1.83 and update to 2.51)
- Use Advance ROM Update Utility to do a Task 29.
- Upgrade to latest Radio ROM, if not latest.
- Flash the ROM you wanted.
Hope this will help you .
Thanks.
dear prabhat thank to reply me dear:
1-during Hard spl I found my version is already about 2.16.415.3 and the version I got from Hard-spl link (your given) is showing 1.83.OliNex, yet I tried with this but again stuck at 0% (error code---262)......Can yoy please tell me how Can I check That my cell is already did hard-spl on it-----and how to know it is CID-Unlocked...............
2-by using Advance ROM Update utility, it also not being flashed and giving the same error 0% (code-262)
may this because of my PC operating system which is Windows 7?
but I have flashed HTC Touch Diamond in the same system.....
please help me, my already OS disturbing me alot.
i-windows (send-don't error)
muqaddas_dunyatv said:
please help me, my already OS disturbing me alot.
i-windows (send-don't error)
Click to expand...
Click to collapse
WIN7 could be your issue, it is best to use XP. Also it is important to install the enablenewrapi.cab
You can check your SPL level by entering bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a suffix.
How to flash?
RUU.exe method;
1. Download enablenewrapi.cab, copy to your device with ActiveSync (WMDC) and execute the cab.
2. Download Topaz_CustomRUU_v1.1.zip and both the 1.83 and 2.51 HSPL files.
3. Place the CustomRUU.exe and the RUU_Signed.nbh file from the 1.83 version into the same folder on your PC.
4. With your device sync'd, run the CustomRUU.exe and follow the prompts on your PC.
5. If successful, the progress bar will go to 100% and you can enter bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a sufffix.
If so, you've successfully flashed HSPL.
Repeat steps 3-5 for 2.51
If unsuccessful....
SD Card Method;
1. Rename the RUU_Signed.nbh to TOPAIMG.nbh and place on the root of your FAT32 formatted SD card.
2. Enter bootloader mode and it should initiate the flash. You may get an error of "No Image Found" or you get progress bar stuck at 0%. This would be a failed flash, just soft reset and you'll be back to stock.
If still unsuccessful....
Try the HardSPL_V5_00R5_183HSPL.zip
my respectable serniors please help me out, I tried to change the PC which has Windows XP, and followed all the procedures you all honored but still stock on 0%.....
dear I try to flash PHOTON ROM through storage card by renaming it and placing it into the root of SD card but not being flashed................
please help
HI Muqaddas,
The issue seems to be somewhere in HSPL and the device is not ready for any custom ROM yet. I dont think PC OS has anything to do here unless the "Antivirus S/W is disabled".
Once you device is CID unlocked you should able to install any ROM .
But as you are telling you can see "1.83.OliNex" in the Bootloader... so Can you try to update that to 2.51 and see if that work?
Also try searching the "error code---262" in the HSPL thread, whihc may give you some idea...
EDIT:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
As you said you can see the OliNex in bootloader your device is CID unlocked.
Can you try below and see if that work:
1) Upgrade your HSPL to 2.51.
2) Start Windows Mobile Device Center
3) Start your device in TriColor boot loader mode.
3) Connect you USB to PC and and make sure your device bootloader white screen say "USB"
4) Now start flashing from PC using RUU.
See if this work else try "SD Card Method" suggested by Bruce.
Hope this will help...
Thanks.
On Ur phone go to Settings-> Connections -> USB to PC & "uncheck" the option Enable faster data synchronization & then try ...worked for me
I am sorry to be desperate but after following all the precedures suggested in this place I am not successful...
I was hopefull that I might flash my TOPAZ after getting 512mb card and after many struggles I arranged it for flashing .....
but after bootloader it stuched at
loading.....
please help if someone can
Try restoring your bootloader to the stock, flash a Windows stock ROM, then come back with HSPL and custom ROM.
Hey, May be you can go to service center near to you and ask them to install new ROM so that they will install new ROM and may be try to unlock the phone if it is with them...
Once they install new ROM then I think you can continue HSPL here and have fun .
Thanks.
Dear Hamsn, Where I can get Windows stock ROM, Please any link or description......
You can get that from HTC website of your region.
Goto: http://www.htc.com/uk/selectcountry.aspx
Select your country -> Click Support -> Select your device and download the latest ROM update.
Of you can grab from here: http://shipped-roms.com/index.php?category=windows mobile&model=Topaz
(File: RUU_Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe)
Just sync your device in PC and run the above file and all should get updated .
Cheers!!!
Hello everyone.
I recently became the owner of XPERIA X1i and now I am interested in the following:
1-How do I change the ROM, as is now in Italy to switch to English language.
2-What ROM to download and from where.
3-What other programs are required to change the ROM
I read the forum but we do not succeed to find his way around changing ROM
The data from the phone from bootloader screen
kovs110
SPL-0.78.0000
MicroP1-787
MicroP2-707
Please ask for help because I do not know a word of Italian
Something else I am from Serbia
Hello,
at first you have to unlock your phone with hardspl:
http://forum.xda-developers.com/showthread.php?t=431218
Instructions to flash Hard-SPL:
it's recommended you run the basic package, and don't flash the other attachment (MFG SPL - it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned OFF, press and hold the volume down button along with the power button, then release the power button, and finally release volume down button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically(your device doesn't go to tricolour screen), please copy Xperia-SSPL-Manual.exe from the Xperia-SSPL-Manual.zip attachment to the device and run it. then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
NOTE 3: this is unsigned Hard-SPL. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here - scroll down!
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
now you can flash all modified roms.
i recommend you to flash roms with the "Micro SD Method".
look at: http://forum.xda-developers.com/showthread.php?t=445662
these are some good roms:
826x Series: http://forum.xda-developers.com/showthread.php?t=734175
Dynamics 2.1: http://forum.xda-developers.com/showthread.php?t=951694
Hi all,
i'm new and i'm trying to flash my HTC HD7.
I'm following this tutorial http://forum.xda-developers.com/showthread.php?t=1295068.
My bootloader was of type 5.x.x, then I try to downgrade using http://forum.xda-developers.com/showthread.php?t=1411904. This throws an error (270 if I remember), and now I have:
Os Version: 7.0.7004.0
Bootloader: 1.57.2250.0.
Now if I try to run the tool for the RSPL, I can't find the 1.57, so I use 1.56; after the procedure my phone did't reboot with the RSPL installed. Same thing if I try 1.60.
Can I do something?
Thank you for the help!
Ok I found my error.
With a bootloader of type 5.10.xx you must to:
Put the phone in tricolor mode (volume down + power on)
Install the SLSPL from http://forum.xda-developers.com/showthread.php?t=1411904
The phone reboot in tricolor mode with something like SPL-1.57.xxx
Install this RUU http://search.4shared.com/postDownload/kXXbn7HR/RUU_Schubert_HTC_Europe_169401.html
Now you can use DFT from http://forum.xda-developers.com/showpost.php?p=16189671&postcount=1 ( I use the g2)
The phone reboot with something like RSPL
Install the rom you want.
Device: HTC HD7 T9292
MID PD29100
SPL-1.57.2250.0
SD SANDISK 7580MB Class0
Total storage: 7.20GB
Available Storage: 6.80GB
OS Version: 7.0.7004.0
Firmware revision number: 2250.09.15702.728
Hardware revision number: 0002
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 1.57.2250.0(113571)
Chip SOC version: 2.2.5.0
Please help, i tried to install custom ROM due to some errors i experienced (constant need for HARD RESET due to white HTC logon screen bug; (stuck on bootloader htc screen)). I downloaded the first file DFT_RSPL_WP7FG1_LAUNCH" (also tried revision #3) but it won't change to RSPL...(there were no error messages..it say like it is all done, but it remain spl.) I chose spl 1.56 from list, there weren't 1.57. Therefore i couldn't install HSPL aswell.
Then i tried to install just RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar". It installed to 100%.. and then says "Invalid image" File is courpted. When i started the phone menu was different a bit. I see some new icons..SingTel IDEAS; SingTel Xplorer; etc..
I should probably point out that i done all this without SIM card inside.
And i had problems with phone in past...it fall a couple of times...my camera is not responding from menu..and i had a "STORAGE CARD NOT WORKING" message.... I don't know is that has to do something with this...but it is better to tell all the informations.
Thanks for the time, any hint would be appriciated.
Thanks,
Nebojsa
nshA said:
Device: HTC HD7 7.5
MID PD29100
SPL-1.57.2250.0
SD SANDISK 7580MB Class0
Please help, i tried to install custom ROM due to some errors i experienced (constant need for HARD RESET due to white HTC logon screen bug; (stuck on bootloader htc screen)). I downloaded the first file DFT_RSPL_WP7FG1_LAUNCH" (also tried revision #3) but it won't change to RSPL...(there were no error messages..it say like it is all done, but it remain spl.) I chose spl 1.56 from list, there weren't 1.57. Therefore i couldn't install HSPL aswell.
Then i tried to install just RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar". It installed to 100%.. and then says "Invalid image" File is courpted. When i started the phone menu was different a bit.
I should probably point out that i done all this without SIM card inside.
And i had problems with phone in past...it fall a couple of times...my camera is not responding from menu..and i had a "STORAGE CARD NOT WORKING" message.... I don't know is that has to do something with this...but it is better to tell all the informations.
P.S. I would give you more information about the phone, but it seems i messed it preety well with this Custom ROM thing..it won't start anymore; i can't go to settings>about" . It shows only (power on + volume down) screen.
Thanks for the time, any hint would be appriciated.
Thanks,
Nebojsa
Click to expand...
Click to collapse
Your device is bricked.
You might be able to save it if you can still get into USB host mode - Device off, hold down the volume down button and camera button together and power on the device, keep holding down the volume down and camera button until you see a screen with a phone and a laptop.
If you can get into USB host mode then you can try and flash the device using the goldcard/ Y cable method. You have to flash a stock/shipped rom that is specific to your device carrier with the Y cable.
Just follow the tutorial here:
http://forum.xda-developers.com/showthread.php?t=1597837
xdrc45 said:
Your device is bricked.
You might be able to save it if you can still get into USB host mode - Device off, hold down the volume down button and camera button together and power on the device, keep holding down the volume down and camera button until you see a screen with a phone and a laptop.
If you can get into USB host mode then you can try and flash the device using the goldcard/ Y cable method. You have to flash a stock/shipped rom that is specific to your device carrier with the Y cable.
Just follow the tutorial here:
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
Thank you.. I will try that too. I edited my previous post. The phone start to work normally. I still can't access my camera, and i will try to replace Storage Card manually. I have a bit different menu now...so i assume Custom ROM install was successful. I'm doing all this to repair my "HTC white boot screen stuck problem". That ussally accure when battery reach low levels, so maybe it is battery problem aswell.
I will see if it will happen again when new ROM is installed.
Thank you for your time and help.
Regards, Nebojsa
Hi
Today I Receive a dead HD7 from a customer.After Repaire Boot with JTAG Phone start and goto Bootloader screen.It Shows SPL-1.23
Now,I cant install any ROM on this set.I try to RSPL and then HSPL but RSPL done ok and HSPL not done.After RSPL and try to install "RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE.exe" Shows "Flash Write" error and phone dead. I repaire Bootloader for the second time and now phone enter in bootloader with SPL-1.23 .Please tell me that how can i install RUU or custom ROM with no error.
Tnx to all.
what does the Bootloader say?