Database Develop

im stucked

im now in xxlsa the stock version and i tried to install hydra core 7 and when i finished the phone stucked on the start and he said ANDROID IS UPGRADING.
any ideas?

idoguy said:
im now in xxlsa the stock version and i tried to install hydra core 7 and when i finished the phone stucked on the start and he said ANDROID IS UPGRADING.
any ideas?
Click to expand...
Click to collapse
Flash the rom again
No other kernel except philz work with jb leaks

its ok i flashed stock rom and now i going to try supernexsus rom.
thanks anyway

idoguy said:
im now in xxlsa the stock version and i tried to install hydra core 7 and when i finished the phone stucked on the start and he said ANDROID IS UPGRADING.
any ideas?
Click to expand...
Click to collapse
idoguy said:
its ok i flashed stock rom and now i going to try supernexsus rom.
thanks anyway
Click to expand...
Click to collapse
Hydracore is not compatible with leaked TW roms..thats why phone got stuck..only Philz kernel works with leaked TW roms as of now..

And Hydracore 7 its plagged with bugs and issues also..
Tapatalking on my n7000

after flashing pacman rom - problem

I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??

valery3212 said:
I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??
Click to expand...
Click to collapse
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:

Poped said:
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:
Click to expand...
Click to collapse
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..

valery3212 said:
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..
Click to expand...
Click to collapse
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?

Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
Kernels are included in roms

Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom

JJEgan said:
Kernels are included in roms
Click to expand...
Click to collapse
Sweet. Thanks for letting me know that. Sadly i love the customization-options with other kernels.
Edit: And can i just re-flash the rom to get other kernel w/o wipe? I meen since its the same ROM only...
valery3212 said:
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom
Click to expand...
Click to collapse
Stock CM kernel, does that include customizations? Like cpu, UV, I/O and the ususal stuffs?
(and now i feel bad for basicly highjacking the thread... sry)
GOT it FIXED Thx everyone!

[Q] Camera don't work after UB

Hi everyone. I'm having problem with my X8. i had previously unlocked bootloader. Currently using iXperia 8 iOS 7 Diamond Build 1.2.6 with nAa-14. the problem is, i can't use the camera. every time i opened the camera it will force closed. i had changed rom countlessly but still not working. i also has changed the kernel to nAa-jb-06 and use JB rom but still the same result. i really need the camera. help me.

HyperAct said:
Hi everyone. I'm having problem with my X8. i had previously unlocked bootloader. Currently using iXperia 8 iOS 7 Diamond Build 1.2.6 with nAa-14. the problem is, i can't use the camera. every time i opened the camera it will force closed. i had changed rom countlessly but still not working. i also has changed the kernel to nAa-jb-06 and use JB rom but still the same result. i really need the camera. help me.
Click to expand...
Click to collapse
Repair with official firmware and check the camera there or flash latest gdx top on nAa kernel
The official firmware it will flash stock Rom and kernel to
Info:
Also if you have plans to relock the bootloader must do it only in stock kernel..NEVER RELOCK BOOTLOADER ON CUSTOM KERNEL

Superuser_ said:
Repair with official firmware and check the camera there or flash latest gdx top on nAa kernel
The official firmware it will flash stock Rom and kernel to
Info:
Also if you have plans to relock the bootloader must do it only in stock kernel..NEVER RELOCK BOOTLOADER ON CUSTOM KERNEL
Click to expand...
Click to collapse
I'm sorry for late reply. having internet issues. what did you mean by flashing latest gdx top?

HyperAct said:
I'm sorry for late reply. having internet issues. what did you mean by flashing latest gdx top?
Click to expand...
Click to collapse
The latest GingerDX (cm7) Rom with nAa 14 kernel because is for sure the most free of bugs rom..to see if is software problem

Superuser_ said:
The latest GingerDX (cm7) Rom with nAa 14 kernel because is for sure the most free of bugs rom..to see if is software problem
Click to expand...
Click to collapse
Try to flash with eclair 2.1.1 :good:

[Q] Kernel for CM 7.1

Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....

maharoof said:
Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....
Click to expand...
Click to collapse
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.

TheScriptKitty said:
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.
Click to expand...
Click to collapse
Thanks for replying ....I'll try that ASAP....

[Q] Rooting and CWM my 2nd n7000

Hi guys
I recently brought a 2nd hand n7000
This rom is totally stock, to be precise, it is a Hong Kong version 4.0.4
Since I want to improve the battery life and have a more defined rom.
I would like to root and install CWM.
Up to now, I understand that there's the infamous brick kernels out there. And I probably need to stay away from ICS.
But because of my n7000 is 2nd hand, i don't know much history about it.
i can not know for sure, that this n7000 is shipped with GB or ICS at the first place?
Or the last guy actually upgrade it from a GB.
My research in this forum tells me it's always better to start with the JB aka 4.1.2 stock.
My question is can i simply flash a HK 4.1.2 as a base without doing all sort of EMMC checking?
Then, flash kernel comes with root & CWM? And finally my rom of choice?
I would like someone could guide me and show me the SAFE way,
Thx in advance!!

Ya.. You can upgrade to JB.. Use of Odin or Kies. Then use Philz kernel to root and get cwm. Now you may proceed with custom roms.

Thx for answering.
I have successfully upgraded my n7000 to JB
it's ZSLR1 (Hong Kong latest stock JB)
Just one more question about rooting.
Can you help me check if this is the correct kernel?
philz_touch_6.19.3-n7000.zip
from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000
I am planning to use the stock recovery method.
I am too afraid to brick this n7000 with "wrong" kernel
THX

j4371 said:
Thx for answering.
I have successfully upgraded my n7000 to JB
it's ZSLR1 (Hong Kong latest stock JB)
Just one more question about rooting.
Can you help me check if this is the correct kernel?
philz_touch_6.19.3-n7000.zip
from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000
I am planning to use the stock recovery method.
I am too afraid to brick this n7000 with "wrong" kernel
THX
Click to expand...
Click to collapse
That kernel is fine if you plan to flash another 4.1.2 or touchwiz based ROM. If you plan on upgrading to kit kat or 4.3jb custom ROMs, you will need raw kernel instead.
Sent from my GT-N7000 using xda app-developers app