Database Develop

[Q] CM7 15-11-2011 Version on S5570 Help

Hi peeps. I just need a little help if you guys can help me here. I recently just bought a Samsung Galaxy Mini S5570 with stock Froyo 2.2.1. I already updated to the latest Gingerbread 2.3.4 and I wanted to install a custom ROM using CM7.
1) I already rooted the phone.
2) Checked "Unknown Source"
3) Installed Clock Work Mod
4) Copied the latest CM7 (update-cm-7.1.0-GalaxyMini-KANG-signed-15112011) to root of SD card.
5) Booted to recovery mode and followed the following steps:
A) Wipe data and cache from the options
B) Select the option ‘install zip from sdcard’ then select ‘choose zip from sdcard’
C) Selected the zip "update-cm-7.1.0-GalaxyMini-KANG-signed-15112011"
D) Waited for installation to finish. After completion I wiped data & cache again.
Now here is my problem:
I followed all the steps over and over from yagyas way and other forums and even tried to clear only cache after installation but still my when my phone boots I am stuck on a screen with only "ANDROID" shown.
Could it be the latest CM7 that I am using that is not compatible with my unit? Or am I doing something wrong? Please help. I really want CM7 and any help here is greatly appreciated.
If you can help, and have the patience, please give me specific details on installing CM7 on my S5570. Thanks for all the help here.
By the way, my version of 2.3.4 Gingerbread is S5570DXKPD_S5570OLBKPD (Asia) and I was wondering if could this be 1 of the problems? Because in 1 of the forums I saw "FIRMWARE S5570XXKPI OR XXKPL OR XXKPK !!!!!! THIS IS FOR CWM USERS ONLY!!!!"

try to wipe dalvik cache too before falsh.
there a re new version of CM7, cm 7.1 17112011 and 7.2, you could try this version too!

This is all I can say....assuming u really are stuck there or boot looping.
Wipe data and cache before flashing and not after...though this should not be a prob.
Doing what I told works,

Flash cm7.x once again.. I'm got this problem from emanon to cm7.2, then i did reflash cm7.2 again...and now...cm7.2 on my phone and ....waiting RC.2 .... B-)
Sent from my GT-S5570 using xda premium

Flash it again, wipe data and cache, take out your SD Card then reboot.
Sent from my GT-S5570 using XDA App

GPS\NAVIGATION APPS does not work!!!
can enyone please help!
I've installed CM7.1 and every GPS app does not work.
I have the XXKPL version!
10X.

This happened to me,too! I just reflashed it. Sometimes this happens. I've read its called a 'bad flash'.
Reflash. That oughta work!

I've tried this for several times and yet not good!
any other suggestions??

ghost0815 said:
Hi peeps. I just need a little help if you guys can help me here. I recently just bought a Samsung Galaxy Mini S5570 with stock Froyo 2.2.1. I already updated to the latest Gingerbread 2.3.4 and I wanted to install a custom ROM using CM7.
1) I already rooted the phone.
2) Checked "Unknown Source"
3) Installed Clock Work Mod
4) Copied the latest CM7 (update-cm-7.1.0-GalaxyMini-KANG-signed-15112011) to root of SD card.
5) Booted to recovery mode and followed the following steps:
A) Wipe data and cache from the options
B) Select the option ‘install zip from sdcard’ then select ‘choose zip from sdcard’
C) Selected the zip "update-cm-7.1.0-GalaxyMini-KANG-signed-15112011"
D) Waited for installation to finish. After completion I wiped data & cache again.
Now here is my problem:
I followed all the steps over and over from yagyas way and other forums and even tried to clear only cache after installation but still my when my phone boots I am stuck on a screen with only "ANDROID" shown.
Could it be the latest CM7 that I am using that is not compatible with my unit? Or am I doing something wrong? Please help. I really want CM7 and any help here is greatly appreciated.
If you can help, and have the patience, please give me specific details on installing CM7 on my S5570. Thanks for all the help here.
By the way, my version of 2.3.4 Gingerbread is S5570DXKPD_S5570OLBKPD (Asia) and I was wondering if could this be 1 of the problems? Because in 1 of the forums I saw "FIRMWARE S5570XXKPI OR XXKPL OR XXKPK !!!!!! THIS IS FOR CWM USERS ONLY!!!!"
Click to expand...
Click to collapse
try flashing once again but without wiping data cache please re flash the gb firmware and recovey

[Q] Install google playstore manually in remICS-jb-4.2 rom

i have recently installed remICS-jb - 4.2.1 rom on my captivate .. and m loving this rom. but the thing is, it doesnt come with google play store installed.. so yes, i tried to flash Gapps but it gets stuck into bootloop . so i had to clean install the rom again (factory reset, wipe, install) ...
i installed many playstore.apk (every version) but they just start and then force closes (no dialouge is shown... it just closes itself after like 2 seconds) . i even copied the playstore.apk in /system/apps but that didn't help. i even rebooted many times after installing the apk.
So, finally i figured the only way left is to flash it via CWM . is there any google android market.zip file to flash via CWM ? if not, please give alternate ways.

dragonflame8712 said:
i have recently installed remICS-jb - 4.2.1 rom on my captivate .. and m loving this rom. but the thing is, it doesnt come with google play store installed.. so yes, i tried to flash Gapps but it gets stuck into bootloop . so i had to clean install the rom again (factory reset, wipe, install) ...
i installed many playstore.apk (every version) but they just start and then force closes (no dialouge is shown... it just closes itself after like 2 seconds) . i even copied the playstore.apk in /system/apps but that didn't help. i even rebooted many times after installing the apk.
So, finally i figured the only way left is to flash it via CWM . is there any google android market.zip file to flash via CWM ? if not, please give alternate ways.
Click to expand...
Click to collapse
oh... noob me. i was flashing older version of gapps.. just downloaded 4.2 updated version of gapps and flashed. its all good now

dragonflame8712 said:
oh... noob me. i was flashing older version of gapps.. just downloaded 4.2 updated version of gapps and flashed. its all good now
Click to expand...
Click to collapse
Hey... is there some tutorial for install gapps? I installed cyogenmod Jelly Bean 4.1.2 and like your ROM it does not have google play.
Please help.

JCibrianS said:
Hey... is there some tutorial for install gapps? I installed cyogenmod Jelly Bean 4.1.2 and like your ROM it does not have google play.
Please help.
Click to expand...
Click to collapse
Grab their specific Gapps and flash them in recovery.

[Q] [HELP] Status 7 Error with flashing CM10 on mini 2

Hello, can some one help me with this issue please, this has never happened to me before, I really don't know what is wrong or how to fix it. I want to try out TheWhisp's CM10 rom on my S6500D, I follow instructions that few ppl posted in the original thread of the rom.
Download rom
Go to squadzone CWM
Wipe data
Install zip
Reboot
I follow that tutorial, I download latest 13.2 update/build or w/e, I have squadzone's 5.0.2.8 CWM, I'm on a stock rom and I'm rooted aswell, so I reboot in CWM, wipe data/factory reset, then Instal zip from sd card, when it tries to instal I get that status 7 error, it say's something about build.prop, I looked around and saw that you can delete something at the beggining when you open updater file and I did that but then It starts to instal but finishes really quickly, less then a minute. Shouldn't it take longer? When it instals I reboot my phone it gets stuck at the screen after Samsung one, on the one where it says Samsung GT-S6500D and then goes into bootloop, can someone help me with this please. Maybe i deleted wrong strings or w/e it's called in updater? I also tried wipe cache + dalvik cache + battery stats

are you sure you used the rom for mini 2 i think the one you flashed was for mini

dheeraj (dhlalit11) said:
are you sure you used the rom for mini 2 i think the one you flashed was for mini
Click to expand...
Click to collapse
Yea I'm sure I was flashing the right one. Anyways I fixed it today, the problem was in my kernel, I flashed squadzone's kernel and it worked perfectly, now I have cm10 on my lil' SGM2 . Well hope this helps if anyone else is having problem like this and sorry for bothering.

CWM Restore Problem

So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?

leo10messi said:
So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?
Click to expand...
Click to collapse
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.

Im having a similar issue
Hi! the same is happening to me, but im sure i flashed the right gapps from cwm. also, i tryed to restore a previous back up, the restore seems succesfull but when i boot i still see the setup wizard, even when i flash the right gapps after restore. I tryed cleaning caché, doing a factory reset. I dont know what else to do. The last thing i was doing with my working phone was trying (but i uninstalled it after a while) swapper2. but i letft my sd card only with fat32 as in the begining.

shut_down said:
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.
Click to expand...
Click to collapse
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/

leo10messi said:
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/
Click to expand...
Click to collapse
Try to install gapps for 4.1.2 JB.

shut_down said:
Try to install gapps for 4.1.2 JB.
Click to expand...
Click to collapse
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?

leo10messi said:
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?
Click to expand...
Click to collapse
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
P.S. Solution for someone was to flash some custom ROM. Try with that.
Sent from my GT-I9070 using Tapatalk

shut_down said:
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Ok mate let me know if you find the solution Thanks

At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...

jazzh said:
At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...
Click to expand...
Click to collapse
Put CoCore with TWRP on SD and install it from CWM.

I had same problem. I never use GAPPS, so I have not flashed the zip. Still I encountered this strange problem.
I found two possible methods which may help.
To restore 'stock JB backup' you must flash CM 10.1(4.2.2) or CM 10(4.1) and make sure you wipe data,cache and dalvik-c before and after flashing.
The from CM 10.1/10 recovery restore the stock JB backup.
If that did not work, the use ODIN to flash the stock JB firmware and then flash custom recovery. With this recovery you can restore either data or all of the partitions. GOOD LUCK

shut_down said:
Put CoCore with TWRP on SD and install it from CWM.
Click to expand...
Click to collapse
And what will I get, permanent twrp ? If yes, then that's it.

jazzh said:
And what will I get, permanent twrp ? If yes, then that's it.
Click to expand...
Click to collapse
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
can i restore my cwm backups from TWRP?
---------- Post added at 08:19 PM ---------- Previous post was at 08:12 PM ----------
well... after installing cocore with TWRP and then flashing gapps 4.1.2 from there, the problem persist. As i said before, after flashing stock rom from odin, then gapps from any recovery, the problem persist. wt* am i doing wrong!?
let me remember you, I am not who started this thread, but i have a similar issue.
Thanks
Edit: in order to bring you clues in case you may help me. I noticed that the keyboard doesnt show up if i try to write the password of the wi-fi network in setup wizard, also gapps still crashing as soon the phone boots and setup wizard after i try to skip it.
later edit: HEY HEY HEY! i noticed in "show log" option in cwm that after restoring the backup there are two issues:
I: Can't format unknow volume: /external_sd
I: Can't partition unsafe device: /dev/block/mmcblk0p8
hmmm... i didn't expect that.

keep updating: both cyanogen 10.0 and 10.2 don't even boot. they stay stucked in the pretty loading screen.
didn't find anything helpfull to do from recovery or odin
any clue?

just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....

alete89 said:
just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....
Click to expand...
Click to collapse
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.

shut_down said:
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.
Click to expand...
Click to collapse
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.

alete89 said:
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.
Click to expand...
Click to collapse
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.

shut_down said:
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.
Click to expand...
Click to collapse
nono, i have I9070. 100% sure.

[Q] How to fix ''fixed'' camera?

Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.

sexipsik said:
Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
Click to expand...
Click to collapse
replace the camera app with one from cm 11 by jenkins build and see if it is working or not

sexipsik said:
Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
Click to expand...
Click to collapse
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
aditya rathee said:
replace the camera app with one from cm 11 by jenkins build and see if it is working or not
Click to expand...
Click to collapse
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try

Will try out!
mahithm said:
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Click to expand...
Click to collapse
At first - thanks for reply. I'm going to try it out and post my experience here. The only problem for me is time.
What version of CWM 5 do you advice to me? It is necessary to flash stock rom via Odin, root again and then flash new CWM via Odin, is it?

mahithm said:
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Click to expand...
Click to collapse
still if this does not work bro try camera app of last stable build of cm 10 made by jenkins
also HAPPY HOLI { it is a festival of colors in india}

sexipsik said:
At first - thanks for reply. I'm going to try it out and post my experience here. The only problem for me is time.
What version of CWM 5 do you advice to me? It is necessary to flash stock rom via Odin, root again and then flash new CWM via Odin, is it?
Click to expand...
Click to collapse
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. As for rooting and installing CWM 5, goto stock recoveymod, choose "apply update from sdcard", then choose the root package first. Perform similar steps to install CWM 5 too and then choose "Reboot system now". Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
---------- Post added at 11:03 AM ---------- Previous post was at 10:51 AM ----------
aditya rathee said:
still if this does not work bro try camera app of last stable build of cm 10 made by jenkins
also HAPPY HOLI { it is a festival of colors in india}
Click to expand...
Click to collapse
Happy Holi to you and your family too, Bro

mahithm said:
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. As for rooting and installing CWM 5, goto stock recoveymod, choose "apply update from sdcard", then choose the root package first. Perform similar steps to install CWM 5 too and then choose "Reboot system now". Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
---------- Post added at 11:03 AM ---------- Previous post was at 10:51 AM ----------
Happy Holi to you and your family too, Bro
Click to expand...
Click to collapse
have fun and tell me after trying my method if it worked or not

Suprise, suprise...
aditya rathee said:
have fun and tell me after trying my method if it worked or not
Click to expand...
Click to collapse
Dear friends,
Mr. Mardon released new stable CM 10.2 with included hotfix! I tried that with CWM 6 and... still same ****.
Then I did it your way - flashed stock ROM, root, install CWM 5.0.2.6, installed new stable release (in Submit bug section there was my post marked as ''resolved'') and - NOTHING!
The only change is that on ''extreme'' quality compression, I get same green stripes as on other qualities instead of just grey screen. One guy there (at least one - one who posted that too) has the same problem. It's really frustrating for me...
At this moment I have CM 7.2 adrenalin ROM in device and... thinking about future :laugh:
What you mean, guys?

sexipsik said:
Dear friends,
Mr. Mardon released new stable CM 10.2 with included hotfix! I tried that with CWM 6 and... still same ****.
Then I did it your way - flashed stock ROM, root, install CWM 5.0.2.6, installed new stable release (in Submit bug section there was my post marked as ''resolved'') and - NOTHING!
The only change is that on ''extreme'' quality compression, I get same green stripes as on other qualities instead of just grey screen. One guy there (at least one - one who posted that too) has the same problem. It's really frustrating for me...
At this moment I have CM 7.2 adrenalin ROM in device and... thinking about future :laugh:
What you mean, guys?
Click to expand...
Click to collapse
I'm sorry to hear that it's not working. Since there is no change even after flashing through CWM 5.0.2.6, this must be a rom related problem. Since you already have 10 posts, now you can directly post this question in the corresponding rom thread so that the owner @Mardon can reply it. Please post the solution here nonetheless so that if anyone encounter the same problem, they will know what to do. Hope I Helped