I was wondering what rom you use to get cm10 on the tmobile? I have been searching here, but don't see much help for the tmobile, and I'm pulling my hair out trying to flash one. I got my kids tmob. on to aokp build 33, ICS 4.0.4 months ago, which changes the model number to P1000, but when I try to flash the P1 cm10 roms I just get an error message and cannot continue. Am I using the wrong rom build? I have the Sprint P100 and I have no problem flashing P1c cm10 nightlies on that one. Any help would be much appreciated!
it is correct.
If can AOKP run build 33
you just have to flash it ~4 times
It is normal
First time it will check and converts.
If still cannot, then restock.
Use overcome method in my signature.
I own a T849 and was running AOKP of any build by Stimpz0r
until now I am still on AOKP JB of latest build, and been trying cm10 too
So I know what I am talking about.
Related
It's been awhile since I flashed any roms. Here is where I stand?
Samsung Galaxy S I9000
Firmware 2.2.1
Baseband version I9000XXJQ1
Kernel Version 2.6.32.9
build number Darky's v9.4.XWJS8
I just did a factory reset as I had planned on dropping it off to get unlocked so I can switch carriers, however found out about the "Galaxy S Unlock" app.
Just downloaded the following apps:
Darky's Rom
Busy Box Installer
Rom Manager
Voodoo Control
Can I go directly from Darky's 9.4 to 10.2.1? Any other apps I may need for the transition. I did the original hacking 6 months ago and haven't retained anything.
Any tips, advice would be helpful
Thanks!!
i think you are asking for trouble flashing from 2.2 to 2.3 in the manner you are thinking.
I would odin flash 10.2 RE doing the full wipe.
Then you want 10.2.1 V2
you can flash that with darkyrom tools from the market
remember to use titanium backup to save all your apps
Thanks, that is exactly what I did after a little research again. Had to take a research break as my brain was getting frustrated with all the information but i got it working.
I do have another problem though. I have my I9000 and blackberry 9300. Both unlocked. For some reason my I9000 will not get reception in Northern Alberta where I work. I've used sim cards from telus/virgin mobile/koodo. Blackberry works fine (full bars), but I9000 doesnt get reception. It does however, work fine when i get back into town.
I'm assuming this is a modem issue? Any suggestions. I'm currently running Darky 10.2.1 V2.
i am looking into that issues also.
I think i have unlocked my phone but have only tried using a wind mobile SIM....
Hopefully i can figure this one out next time i see my cousin and i can try his SIM.
Me and my wife are both on Bell.
Oh and your Darky ROM is old
10.2.2 is the newest stable out.
But if you dont mind flashing the JVT RE edition is faster and works great
liv4air said:
It's been awhile since I flashed any roms. Here is where I stand?
Samsung Galaxy S I9000
Firmware 2.2.1
Baseband version I9000XXJQ1
Kernel Version 2.6.32.9
build number Darky's v9.4.XWJS8
I just did a factory reset as I had planned on dropping it off to get unlocked so I can switch carriers, however found out about the "Galaxy S Unlock" app.
Just downloaded the following apps:
Darky's Rom
Busy Box Installer
Rom Manager
Voodoo Control
Can I go directly from Darky's 9.4 to 10.2.1? Any other apps I may need for the transition. I did the original hacking 6 months ago and haven't retained anything.
Any tips, advice would be helpful
Thanks!!
Click to expand...
Click to collapse
How to flash Darky 10.2.1
http://hdtechvideo.com/?p=48
Oh and your Darky ROM is old[/QUOTE said:
Hahaha thanks
Click to expand...
Click to collapse
liv4air said:
Hahaha thanks
Click to expand...
Click to collapse
How to flash Darky10.2.2
http://www.hdtechvideo.com/?p=48
hi
i have an original p1000(bell canada)running the euro rom that allows phone calls sms etc.
works very well.
my question is there a way to enable phone calling with any of the ics builds??
basically i want my original tab(p1000)to run any version of ics and still allow
phone capabilities.
possible?
i am not scared to use odin
thanks
all the ICS build now (CM9 and AOKP) support calling.
is there a thread that i can read up on this?
all i can find are the original threads with the euro rom and bell modem.
nothing newer about ics.
thanks
and thanks given
ICS is not stable yet. Various functions are not working or partially working.
Why not try Overcome 4.1 ROM. It is Gingerbread based and very close to Samsung stock. Very popular ROM.
There is a thread in Dev section.
Dear community sweet community of knowers-all
Which is the stablest nightly of them all?
I should just grab newest?
Sent from my windows phone while driving to pick up my touchpad:-D
Im using aokp milestone 5. I like it! In terms of stability all the recents rom are pretty much the same. Some just have more features.
Newest. They have all been stable.
~E.R.A.
I was running AOKP M4 for a while and it was pretty decent... upgraded to M5 and had some issues.
Switched to the latest nightly of CM9 (0430-nightly)... and love it! Best wifi experience with an ICS rom yet and performance is top notch...
i done screwed up
guys,
I think i've been following the guide to a T, aside from using a nightly .zip instead of the alpha they mention, . .. butt ...
After it's all done I see Moboot. I ask to boot cyognemod and it shows cyogenmod logo for about a minute then it just reboots and goes into the Moboot again.
Have I missed a step?
I have tried and checksummed (before running the script) both 28 and 30 CM9 nightlies, the latest ones. Everything looked fine until I tried to turn it on after the script finished.
Any ideas?
*EDIT I need to read more, and discover ACMEInstaller2
p.s. cwm works, yay.
Thanks for your help!
Yaaay!
ACMEInstaller2 was the culprit. I hope the guide is updated somehow to mention that if you're trying cm9 that you should use the different script.
yaay thanks for the advices. it's nice to know they don't release nightlies that would have regressed a previous version!
So i got the 8.9 last week and am pretty happy so far. My main uses are internet surfing and hd videos from youtube and play store. However one of my only complaints is that this thing isnt the fastest. I upgraded to official ics when i first got the tab and its not bad but still id like to install Asop jellybean and overclock the tab to 1.2 or 1.4. However id hate to brick my tab which i see on here all the time. The only problem is i have no idea how to root, even after reading and searching for the past week. My question is could some one tell me or show me a link to show EXACTLY how to root to the newest asop jb from official ics without bricking and then tell me how to oc it? I am such a noob with this, I dont know what kernels or anything is. Any help would be greatly appreciated.
Not sure how missed this thread in the list. It's stickied at the very top.
http://forum.xda-developers.com/showthread.php?t=1406137
Follow these steps in the link:
http://forum.xda-developers.com/showthread.php?t=1287205
noridomi.bimbim said:
Follow these steps in the link:
http://forum.xda-developers.com/showthread.php?t=1287205
Click to expand...
Click to collapse
or search on youtube
Good thing i didn't go a head and try to root. I have official ics installed and apparently you have to flash so,e cmw rom or something but i have no idea how to do that, i have searched the forums and all the instructions are just kind of bland and not real specific. Sad as it is, i am someone who needs exact instructions and explanations of how to specifically complete each instruction. Sorry that i am being a pain. I just bought thus tab on a amazon credit card and have not even, ade the first payment that is why I am so worried about bricking or messing up the tab. Thanks for any help
Install cwm 6.0.10 http://forum.xda-developers.com/showthread.php?t=1406137
Install ics by tracid based on taiwan stock rom official http://forum.xda-developers.com/showthread.php?t=1406137
No need rooting..already root when install ics by tracid..read instructions carefully
Sent from my GT-P7300 using XDA Premium HD app
hwooei said:
Install ics by tracid based on taiwan stock rom official
Click to expand...
Click to collapse
Hmm. I'd be careful recommending ROMs just yet. He hasn't mentioned which model of 8.9 Tab he has.
Given that he mentions he's already on ICS I'd assume he's probably got a wifi-only P7310. He doesn't mention any other radio types (3G, LTE, etc.).
@Wrebbs, what model 8.9 tab do you have?
boscorama said:
Hmm. I'd be careful recommending ROMs just yet. He hasn't mentioned which model of 8.9 Tab he has.
Given that he mentions he's already on ICS I'd assume he's probably got a wifi-only P7310. He doesn't mention any other radio types (3G, LTE, etc.).
@Wrebbs, what model 8.9 tab do you have?
Click to expand...
Click to collapse
I have the wifi only, 7310. Thanks for taking the time to help with this
I've tried various roms and liked cm10 very much. Had to flash stock 3.2 via odin to get rid of the garbled screen issue and decided to try update OTA to ics that worked and i'm running stock ics on my dutch 7310 now this works fairly well, so i am going to wait untill the battery drain issue is being fixed on cm10 and try again then
Sent from my GT-P7310 using XDA Premium HD app
Wrebbs said:
I have the wifi only, 7310. Thanks for taking the time to help with this
Click to expand...
Click to collapse
Not happy with the stock ICS version of the Tab? Did it upgrade over kies? Are you in the US? I am in Europe and have the 3G version. Have to use a ported rom from 7500 to get ICS.
The ICS I have runs really smooth! Price was good aswell. Strange that your TAB is slow...
Only problem I have is that Adobe Flash gives me some trouble in HD and on some sites.
I tried HC 3.2 Stock, CM10 JB 4.1, SafariKing ICS and ported ICS from 7500 v2 and honestly - If I had stock original ICS I think I would stay with it! The Jellybean ROMs still have issues. in Alpha Beta stages.
The Tracid rom mentioned might be the next rom I try, but still happy with the ICS rom I have. If it aint broke don't fix it... (Itchy though, flashing roms is fun.)
Take it from someone whos hard bricked before, take your time and do your homework. Make sure you know the rom is for your specific device. You're not going to see drastic speed increases even if oc'd. So take your time and re-read everything. Your going to have to flash a recovery first, cwm or twrp through odin. Again, make sure it's for your device. Then you can root or flash a rooted rom. Once again, make sure it's for your device.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
I have a Galaxy Note from Telstra Australia. This is a N7000B (not just N7000). I've searched all the treads and couldn't find a Jelly Bean ROM that can be used, nor any mention of people successfully flashed an N7000 ROM to this Telstra phone. Please help, I'm sure there is other users with same question. Thanks all.
PS: hope this is the right place to post this in this forum.
I'm using a N7000B from Telstra too. I've tried Ultimate ROM, XXLSA/C Leaks, Paranoid Android and a few others and all have worked fine.
Thanks for that. Did it change to N7000 then. Did you use CWM or Odin.
Thanks again for reply. Sorry for all the questions new to Android
Sent from my GT-N7000B using xda premium
I've got the same phone, N7000b from Telstra. Currently running Paranoid Android 2.57.2 by Utacka and generally any N7000 non-b rom will install and run fine, though I have had some issues as the install ages. Usually a full wipe fixes any of these issues.
If you have the stock rom still installed, I'd be quite keen to get a copy off you. Is it ICS or still on GB?
I started off by following the instructions on this thread to get root. I had to downgrade the firmware using Odin, then root it as described in post #3 of that thread.
I've described the steps before - more info here
Thanks guys for your response and help. It gave me confidence and now I'm on PhilZ 3.99 kernel and Ultimate rom v 5.1. Works smoothly with no boot loop issues. might be the PhilZ 3.99 that solved it.
I found this stock rom for our Telstra N7000B and tested the md5 with odin. Worked great and reverted back to stock.
http://www.sammobile.com/firmwares/1/?model=GT-N7000B&pcode=TEL#firmware
Cheers
Help
he3at said:
I've got the same phone, N7000b from Telstra. Currently running Paranoid Android 2.57.2 by Utacka and generally any N7000 non-b rom will install and run fine, though I have had some issues as the install ages. Usually a full wipe fixes any of these issues.
If you have the stock rom still installed, I'd be quite keen to get a copy off you. Is it ICS or still on GB?
I started off by following the instructions on this thread to get root. I had to downgrade the firmware using Odin, then root it as described in post #3 of that thread.
I've described the steps before - more info here
Click to expand...
Click to collapse
I've tried flashing abysskernel4.2 and carbonROM but it failed. How did you flash Paranoid Android?