Hi everyone,
i've unlocked and rooted a 81.5.310002.XT890.Retail.en.GB razri
i've applied the 81.5.40002.Retail.en.EU - 4.0.4 (as i'm living in france) everything's going well no failure in the fastboot process after a wipe data and cash but when i get back to the parameters i've still 81.5.310002.XT890.Retail.en.GB any idea of what went wrong ?
thanks
Related
Hey Guys,
I have a stock Milestone from Telus, it's unlocked and running the Telus 2.2 ROM. I was using facebook and my phone was lagging terribly so I decided to reboot the phone. When I went to turn it back on, I got the Bootloader 90.74 Corrupt Code error. Last time I got any bootloader error was when it was rooted almost a year ago (returned to stock). Is there anything I can do to get my system back? I had it all nicely configured and I had a bunch of txts I didn't backup (really want these). I didn't do anything to cause this! Is it possible to image the phone, factory reset it, push the texts back? Help!
Thanks in advance,
Jon
You can try flashing the bootloader again from here, either 90.74 or 90.78. If you choose to upgrade to 90.78, dont go back to 90.74.
Hello community,
I have actually came across a difficult situation with my Galaxy S3 LTE i9305 (international variant).
In order to give you a high level view of what happened im going to write a few topics of what I have flashed to the phone since I bought it (new) back in March 2012:
1. I'm from Portugal and I bought the phone on an online retailer because I wanted the grey version. So far so good I ordered it on the UK.
2. The phone I received, although being unlocked and sealed/new, had software branding from MDA germany.
3. At the time we were on Android 4.1.2. I went to sammobile and installed the TPH version (Portugal) of 4.1.2 in order to have the full stock experience. Eventually I rooted the device.
4. Later on came the 4.3. At the time I was not aware of the bootloader complications and ended installing the UK or German version (clean) that was on Sammobile. Installation went fine and I immediately rooted the device without issues and disabled Knox in the Rom.
5. Yesterday I had this great idea of flashing 4.4 (still unaware of bootloader issues) and downloaded the spankin new 4.4.4. from the nordic countries from sammobile. This is where it gets interesting.
6. I have tried a zillion combinations and either I get stuck on the samsung logo or I get the error of binary 3 and device 2 (or the other way around). All the flashes via ODIN have been done using the AP/PDA option.
What can I do to unbrick it? I don't remember which ROM I flashed for 4.3 and I have tried to flash the german version of 4.4 (set 2014) and the nordic countries one. Also tried flashing 4.1.2 via CWM recovery directly from SD card but still no go and stuck at bootloop. Have also tried software repair using Kies (manually inserting serial number under the battery) and still no go for my dismay...
Is it recoverable? Is there a way to upgrade it to 4.4? If it helps so far I have been able to fash stuff via ODIN and still have download mode. I dont care about data as I did make a backup before setting off on this "adventure" :laugh:
Thanks in advance.
Eventually solved using Philz recovery. Turns out that during the flash process for some reason the /data partition could not be formatted.
Now recovered and running the clean 4.4.4. of XDA
Hi Guys!
I have S3 LTE GT-i9305
I had phone rooted working fine but decided to go back to stock! (don't know why?)
So I downloaded Germany firmware from SamMobile 4.4
Used Odin to flash stock firmware. It went successful. It started and stuck on Samsung logo. I downloaded another firmware (Optus - 4.3) but it failed. ---- error - SW Rev. Check fail. Device 3 Binary 2
Before I break something else CAN YOU GUYS HELP PLEASE.
SOLVED
sorry guys. went to recovery and wiped cache/factory reset. turned on - it is working.
One more question.
Would Germany firmware work in Australia - OPTUS network?
Hi all , first I want to introduce my self , I'm Algerian my age is 28 and my english is poor ,
I've bought a barely used LG G4 T mobile USA (h811) in algeria (IMEI : 352392072710598) , the phone was on android 5.1 its updated itself on MM it was good until the dialer ,flash and the camera stopped working , with thoses messages : unfortunately dialer has stopped , unfortunately camera has stopped , and the flash doesn't work ; it says because the camera is used , I'm really sad guys it cost a month salary and there is no dealer or contructor warranty and no technical support for the T-mobile version in algeria .
I tried almost everything , erased cache of application , the issues are still here , factory reset/ hard reset --> same thing
I bought it 5 days ago !!
I hope you can help me guys
Wish you the best
Did you try flashing a new factory restore 6.0 image with a computer or did you just do a reset through the phone?
jobella said:
Did you try flashing a new factory restore 6.0 image with a computer or did you just do a reset through the phone?
Click to expand...
Click to collapse
Hi Jobella , I flashed the 5.1 h811 10n with LG UP , I guess it's a gardware probleme , I got an OTA update to 6.0 (h811 20i) --> same problem, maybe the infamous motherboard , mine have a 506********* Serial number :crying:
Sorry for my english
Because you are already on 20i, I would try flashing the 6.0 factory image update through LG UP. Back up everything on your phone first. Do not flash the 10h because you may brick your phone. If it is a hardware problem you can buy a new camera on Ebay for $15 or a back panel with the flash for about $12. It doesn't sound like a hardware problem but It could be water or humidity damage.
First I would try downloading the factory image for 6.0 for the H811 from LG and flashing with LG UP. I assume you are not rooted and the phone is an H811.
jobella said:
Because you are already on 20i, I would try flashing the 6.0 factory image update through LG UP. Back up everything on your phone first. Do not flash the 10h because you may brick your phone. If it is a hardware problem you can buy a new camera on Ebay for $15 or a back panel with the flash for about $12. It doesn't sound like a hardware problem but It could be water or humidity damage.
First I would try downloading the factory image for 6.0 for the H811 from LG and flashing with LG UP. I assume you are not rooted and the phone is an H811.
Click to expand...
Click to collapse
Exactly the phone is the H811 , and yes I'm not rooted , I will download the stock 20i 6.0 image from here http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
When I flash it I will tell you
I dont know how the two cameras , the flash , the dialer system can die simultaneously without any physical damage , whatever I will follow your advice and flash the 20i , and let you know after
thanks jobella
Hi guys,
Since yesterday I got a problem that soon after startup my phone freezes. When it freezes I have to hard reset the phone(power button+vulune up). Before that my phone was working fine. but I wanted to reset my phone to clear up some space. I did that by going into the TWRP recovery and wiped cache, data, dalvik, internal/external storage and system. Because I deleted the system partition TWRP said there was no OS installed. This was very stupid that I wiped the system partition. But I thought that I could just flash the stock firmware back in flashtool so i did that. But now my phone freezes very soon as it started up. so I cant even complete the setup of the phone.
There was one thing that stud out to me. That was an error that I got when flashing the firmwares. the error was: warn - unit 2212 not found in bundle. Maybe this means something. I googled it but couldn't find a solution to the error message.
The things I tried:
-Flashed the stock firmware(centrel europe 1, central europe 5, customized netherlands)
-Flashed the stock firmware + flashed 2 different(kernel 1 and 2) custom kernels(centrel europe 1, central europe 5, customized netherlands)
-Flashed this kernel and installed this rom
-Flashed the boot.img from the lastest CyanogenMod 12.1 build and installed that rom
I did all this and it was always the same problem. I don't know what to do anymore. I hope you guys can help me. If u need more info I will try to give that.
Ive spend my whole day searching for an solution for this problem. But still I havent found any solution.
additional info:
Phone: Xperia Z1(honami)
Model:C6903
Carrier: KPN
Country: The Netherlands
TA partition: Lost/not backed up
DRM status: Lost
Links to all the roms, kernels, firmwares I used:
Kernels: kryptonian kernel(venkat kamesh), OK kernel(olokos)
ROMS: kryptonian rom of awesomeness(venkat kamesh), latest CyanogenMod 12.1(CyanogenMod)
Firmwares(from XperiFirm): 14.6.A.1.236(central europe 1), 14.6.A.1.236(central europe 5), 14.6.A.1.236(customized NL), 14.6.A.1.236(KPN)
The firmwares were downloaded using Xperifirm in flashtool.
The firmwares were flashed with delete USERDATA and APPS_LOG checked(screenshot).
flashtool was fully up to date(0.9.23.2)
I will upload a video tomorrow on youtube so that you can see what is exactly happening.
8/4/2017 22:05(10:05PM)
- Not all links updated, thread not fully finished.
8/4/2017 22:35(10:20PM)
- Screenshot added, links updated, little text error's changed(my English is not that good )
9/4/2017 08:50(08:50AM)
- Added DRM status, TA partition status
MiniKoelkast said:
Hi guys,
Since yesterday I got a problem that soon after startup my phone freezes. When it freezes I have to hard reset the phone(power button+vulune up). Before that my phone was working fine. but I wanted to reset my phone to clear up some space. I did that by going into the TWRP recovery and wiped cache, data, dalvik, internal/external storage and system. Because I deleted the system partition TWRP said there was no OS installed. This was very stupid that I wiped the system partition. But I thought that I could just flash the stock firmware back in flashtool so i did that. But now my phone freezes very soon as it started up. so I cant even complete the setup of the phone.
There was one thing that stud out to me. That was an error that I got when flashing the firmwares. the error was: warn - unit 2212 not found in bundle. Maybe this means something. I googled it but couldn't find a solution to the error message.
The things I tried:
-Flashed the stock firmware(centrel europe 1, central europe 5, customized netherlands)
-Flashed the stock firmware + flashed 2 different(kernel 1 and 2) custom kernels(centrel europe 1, central europe 5, customized netherlands)
-Flashed this kernel and installed this rom
-Flashed the boot.img from the lastest CyanogenMod 12.1 build and installed that rom
I did all this and it was always the same problem. I don't know what to do anymore. I hope you guys can help me. If u need more info I will try to give that.
Ive spend my whole day searching for an solution for this problem. But still I havent found any solution.
additional info:
Phone: Xperia Z1(honami)
Model:C6903
Carrier: KPN
Country: The Netherlands
Links to all the roms, kernels, firmwares I used:
Kernels: kryptonian kernel(venkat kamesh), OK kernel(olokos)
ROMS:kryptonian rom of awesomeness(venkat kamesh), latest CyanogenMod 12.1(CyanogenMod)
Firmwares(from XperiFirm): 14.6.A.1.236(central europe 1), 14.6.A.1.236(central europe 5), 14.6.A.1.236(customized NL), 14.6.A.1.236(KPN)
The firmwares were downloaded using Xperifirm in flashtool.
The firmwares were flashed with delete USERDATA and APPS_LOG checked(screenshot).
flashtool was fully up to date(0.9.23.2)
I will upload a video tomorrow on youtube so that you can see what is exactly happening.
8/4/2017 22:05(10:05PM)
- Not all links updated, thread not fully finished.
8/4/2017 22:35(10:20PM)
- Screenshot added, links updated, little text error's changed(my English is not that good )
Click to expand...
Click to collapse
1st: Finally someone who does a proper report with all information needed, have a few thumbs :good::good::good:
2nd: Your English is fine
3rd: You should use the tool Emma. It's been free for a few years now. You can find it on the web, I remember having seen it on chip.de some time ago.
This tool is exactly what you need and has saved my phone's ass more than one time.
It basically un-does any software modification you've ever done and enables you to start from scratch!
Kaffeetrinker said:
1st: Finally someone who does a proper report with all information needed, have a few thumbs :good::good::good:
2nd: Your English is fine
3rd: You should use the tool Emma. It's been free for a few years now. You can find it on the web, I remember having seen it on chip.de some time ago.
This tool is exactly what you need and has saved my phone's ass more than one time.
It basically un-does any software modification you've ever done and enables you to start from scratch!
Click to expand...
Click to collapse
Thanks you for your answer on my post!
Unfortunately Emma didn't solve my issue. I tried it several times with 3 different firmwares(those were the only available). I also relocked the bootloader and tried reparing the phone through Xperia Companion. But that gave the same result. I made a video were you ca see the problem. The link will be in the post 60 minutes after this post. I hope my problem will get solved!
Thanks for your time!
I think I found the problem!
So I think that the SD card is the problem. When I installed a firmware trough Emma I took my SD-card and Sim-card out and put them in my backup phone(so people could just call me etc.). And then suddenly the phone worked. I first put in my Sim-card in my phone so I could install whatsapp and have my contants loaded. Then I plugged my SD-card in and after 3-5 minutes the phone froze. So I think it's the SD-card. I am not sure yet but I am going to do some more tests with different SD-cards. I will let you know every update!