Cm7 with jb partition layout.. - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi guys I want to know is there any way go Change cm7 partition layout to jb partition layout... I like cm7 performances but I don't like its low storage in data data. I used the script but im very unhappy with that....
If someone help me i definitely HIT THANKS....

Related

Sense making partitions sizes - Help

Hi,
i want to partition my 8gb class 6 sd card with RA-dream-v1.5.2.
I use CyanogenMod the newest version and the HardSPL+newest Radio...
Which size would be making sense for swap and ext4???
I think for ext about 500mb, or???
And what is with swap size?
Thanks for help
ScorqYoN
ScorqYoN said:
Hi,
i want to partition my 8gb class 6 sd card with RA-dream-v1.5.2.
I use CyanogenMod the newest version and the HardSPL+newest Radio...
Which size would be making sense for swap and ext4???
I think for ext about 500mb, or???
And what is with swap size?
Thanks for help
ScorqYoN
Click to expand...
Click to collapse
well, as many of the threads posted by devs say, 512 is a good recommended ext size. as far as swap goes, you don't really need it for any CM builds. that isn't to say you can't use it. I always have my card partitioned at about 6.5gb fat32, 512 ext3 and 40 for swap because i got tired of repartitioning it everytime i wanted to flash a hero or eclair.
So i don't need swap for CyanogenMod???
Should i although give swap size 96???
ScorqYoN said:
So i don't need swap for CyanogenMod???
Should i although give swap size 96???
Click to expand...
Click to collapse
Cyanogen does not use swap by default and it will not be activated unless you make it so. I would just because if you go to a rom that uses swap you won't need to repartition
Ok, so i make no swap, thanks....
ScorqYoN said:
Ok, so i make no swap, thanks....
Click to expand...
Click to collapse
Super-D & Wesgarner's roms are faster.Might wanna try those out.Cyan is good for those that want just the stability and normal speed.
But for those I need Danger SPL, or???
Are they stable like CyanogenMod???
ScorqYoN said:
But for those I need Danger SPL, or???
Are they stable like CyanogenMod???
Click to expand...
Click to collapse
they're a lil bit more iffy. i can't say for sure as i haven't given either of them a fair chance on my device, but from what i've heard, they're speedier. but for supreme stability, Cyan is the best. and just to be clear, you don't NEED swap for cyanogen, but it's always good to have it just in case you want to test out a hero or eclair build, you know?
and i'm not sure, but i think those do require the danger spl, but honestly, if you read the directions and know what you're doing, you can accomplish is with great success. i've done it twice already and both times have worked flawlessly.
grandomegabosses said:
they're a lil bit more iffy. i can't say for sure as i haven't given either of them a fair chance on my device, but from what i've heard, they're speedier. but for supreme stability, Cyan is the best. and just to be clear, you don't NEED swap for cyanogen, but it's always good to have it just in case you want to test out a hero or eclair build, you know?
and i'm not sure, but i think those do require the danger spl, but honestly, if you read the directions and know what you're doing, you can accomplish is with great success. i've done it twice already and both times have worked flawlessly.
Click to expand...
Click to collapse
You are right, they need the Danger spl
Yeah, but the question is, if i need an other rom than Cyan...
Have the roms any more functions or something else???
The Cyan has the advantage that i can Update with only my G1 and have often updates+many themes...
I heard that the Hero Roms haven't bluetooth, what i don't find good.
Are their else any differences or why do many people use hero or eclair roms???
ScorqYoN said:
Yeah, but the question is, if i need an other rom than Cyan...
Have the roms any more functions or something else???
The Cyan has the advantage that i can Update with only my G1 and have often updates+many themes...
I heard that the Hero Roms haven't bluetooth, what i don't find good.
Are their else any differences or why do many people use hero or eclair roms???
Click to expand...
Click to collapse
for one thing, hero is GORGEOUS. eclair has supreme features and it's really sexy too. as of right now, eclair is my rom of choice, with a backup of cyanogen for stability. the only downside for eclair really is the camcorder, which will be worked out once htc releases the drivers. camera works now, as does practically everything else.
so to answer your question, yes, other builds have other features. but in essence, it's a matter of personal preference. if you want stability with good speed, cyanogen is a great choice. if you want a gorgeous look on your phone with awesome widgets, go with hero. for the latest features, then eclair is your rom. it's a matter of what you want.
Ok, so i think then i test hero and ecliar...
First i have to install danger SPL, have anyone good and safe tutorial???
And what are the best hero/eclair roms???
???????????????????????????????????
Super D
Just my 2 cents - I've found SuperD just as stable as Cyanogen, actually more so - never had an fc problem since installing 1.5 and then 1.6. If you've got DangerSPL/don't need it because you're on a MT3G, then definitely give it a whirl. i was really shocked by how good it is. Same with Dwang, although there's less in the way of goodies. Haven't tried WG yet.
I keep a swap partition on my card - 64mb personally. even if the rom ain't using it, it stops me from losing my data going to hero/eclair as mentioned above.
But with hero and eclair i have no bluetooth, or???
What i have to do now?
My SD 8gb sd card is partitioned: 96mb swap, 512 ext4
I have to update to danger spl and then??? Install a easiliy the rom, or have i to wipe or something when i change rom???
?????????????????????
ScorqYoN said:
But with hero and eclair i have no bluetooth, or???
What i have to do now?
My SD 8gb sd card is partitioned: 96mb swap, 512 ext4
I have to update to danger spl and then??? Install a easiliy the rom, or have i to wipe or something when i change rom???
Click to expand...
Click to collapse
Please HELP!!!

need help here!! thanks!

alright i have accidently partitioned my intenal memory on cwm so i flashed back to gingerbread and my internal memory is shown 1.8gb for apps storing now i flashed to cm10 and my internal memory is show only 488mb >< it used to be 1.8gb how do i fix this!! help me please!
now your system rom is of 1.9 gb
galaxy16 said:
alright i have accidently partitioned my intenal memory on cwm so i flashed back to gingerbread and my internal memory is shown 1.8gb for apps storing now i flashed to cm10 and my internal memory is show only 488mb >< it used to be 1.8gb how do i fix this!! help me please!
Click to expand...
Click to collapse
Hey, have a look in the cm10 dev-thread! It has been discussed for very long now. Due to performance reasons pawitp swapped the layout of the two NAND-chips in our SGS. (System partition: 1,8GB - Data-partition: 488MB)
This was pretty clever, because people with an old SGS (slower oneNAND) have a much better performance of cm10 now, so i think it never gets reverted!
If you want the old partition layout back, look for other cm10 roms out there. There are some with the old /datadata-trick that worked pretty well in cm9.
If you want to stay at cm10 and use pawitp's new partition layout for a faster experience, you should move large apps to SD-Card
Hope this helped, Cheers
ThrashJan said:
Hey, have a look in the cm10 dev-thread! It has been discussed for very long now. Due to performance reasons pawitp swapped the layout of the two NAND-chips in our SGS. (System partition: 1,8GB - Data-partition: 488MB)
This was pretty clever, because people with an old SGS (slower oneNAND) have a much better performance of cm10 now, so i think it never gets reverted!
If you want the old partition layout back, look for other cm10 roms out there. There are some with the old /datadata-trick that worked pretty well in cm9.
If you want to stay at cm10 and use pawitp's new partition layout for a faster experience, you should move large apps to SD-Card
Hope this helped, Cheers
Click to expand...
Click to collapse
thanks for the info!
ThrashJan said:
Hey, have a look in the cm10 dev-thread! It has been discussed for very long now. Due to performance reasons pawitp swapped the layout of the two NAND-chips in our SGS. (System partition: 1,8GB - Data-partition: 488MB)
This was pretty clever, because people with an old SGS (slower oneNAND) have a much better performance of cm10 now, so i think it never gets reverted!
If you want the old partition layout back, look for other cm10 roms out there. There are some with the old /datadata-trick that worked pretty well in cm9.
If you want to stay at cm10 and use pawitp's new partition layout for a faster experience, you should move large apps to SD-Card
Hope this helped, Cheers
Click to expand...
Click to collapse
how do you move apps to sd card ><
galaxy16 said:
how do you move apps to sd card ><
Click to expand...
Click to collapse
Go to Settings/Apps, there you can move apps to SD, if the developer of the app enabled it. Just click on a fat app and look for the "move to SD" button or similar
There is also an app at the playstore that's called App2SD. It lets you move your apps in a more comfortable way. :good:
Cheers
PS: It's not a crime to hit the Thanks-Button dude xD

Milestone Performance With CM 7.2.4c

Hi guys. My uncle gifted me this device with CM Mod 3 month ago. Now this device lags as nokia 5800 .
I have only 72 mb of 256 free RAM space .. I cant play Trial Extreme 3 and so on.... I run Opera and Vk , and my device cant open any other applicantion.
Processor overclocked on 1Mhgz and i use JiT ( setuped in cm settings)
It surely needs a swap partition. Read other topics how to set such a partition on the sd card.
Sory but i dont understand, i need to swap a partition for more Ram ? Or better to setup CM 10 with android 4.2 ?
Swap partition is a partition you create on your sd card. It supports your phone with extra memory and its capacity. You can use mini mod by fufu to setup swap, ext partitions.
If you want to set up Cm 10 on your milestone, you can't make it without ext. The swap partition is required too.
Cm10 will work faster or slower? I can make 1gb swap , i have 32gb flash, cuz i only want very fast phone
Definitely it is cm7. Much faster and smoother. The thing is, Milestone is kind of outdated phone in terms of hardware (some say it has pretty good cpu, but has to be overclocked anyway), thus you cannot expect miracles. I would sick to cm 7.
CM7 is your choise
Shadow XX said:
Cm10 will work faster or slower? I can make 1gb swap , i have 32gb flash, cuz i only want very fast phone
Click to expand...
Click to collapse
Its very slower the cm10
panagiotis15 said:
Its very slower the cm10
Click to expand...
Click to collapse
And every update that the apps are making make the M1 slower
Not use cm10 on this, try cm9, cm10 is really slow

[Q] Increase RAM use SWAP partition

Hello guys..
I've already search about this in XSP's part but not (yet) found one, so i'm decided to ask
Sorry if this question so noob :fingers-crossed:
Okay then, is there (possibility) mod/tweak/method to use SWAP partition for increase RAM in our beloved device??
Hmm, in my opinion this method can't use easily because the most important thing with it is kernel. Correct me if i'm wrong :fingers-crossed:
Why i want use it? Okay, there some method to solve this like use RAM Manager PRO, deodex ROM and debloated apps, or use Custom ROM which have minimal or basic android packages. Yea it help in some case, BUT I need more. Sorry for this b*ll**** reason
Thanks
this may help you >> [GUIDE] [FAT32] [EXT4] [SWAP] [2.3+] How to Partition your Android MicroSD Card
Swapper 2 can also be used to setup a swap FILE as swap, but didn't work in SP with stock kernel. Looks like our stock kernel doesn't have support for swap..
I am also looing for RAM swapp. anybody can help?

Storage Space - Internal Limitation

I have just got my hands on a Galaxy Ace S5830 It will be my spare /temporary phone for a while so I thought I would have a play with it So far it's a great little phone.
It was on the standard rom but I am greedy and I now have ROOT + CWM 5.0.2.6. and then upgraded to Kitkat For All [CWM.5.x] CM 11, Omni & Omega by Salim PS earlier today and it's much nicer than the stock stuff.
The only problem I am having is the totally crap internal storage limitation Is there anything that can be done to increase it? Once I install a few apps I am totally out of internal storage space Which is no fun at all...
I have had a look around but i really don't know what I am looking for Can you help...
T1Cybernetic said:
I have just got my hands on a Galaxy Ace S5830 It will be my spare /temporary phone for a while so I thought I would have a play with it So far it's a great little phone.
It was on the standard rom but I am greedy and I now have ROOT + CWM 5.0.2.6. and then upgraded to Kitkat For All [CWM.5.x] CM 11, Omni & Omega by Salim PS earlier today and it's much nicer than the stock stuff.
The only problem I am having is the totally crap internal storage limitation Is there anything that can be done to increase it? Once I install a few apps I am totally out of internal storage space Which is no fun at all...
I have had a look around but i really don't know what I am looking for Can you help...
Click to expand...
Click to collapse
You need a rom that uses a Kernel with swap support and you need to partition your sd with CWM (advanced settings). No cm11 kernel has swap support and link2sd don't work either. Some Cm 10.1 and below do. I just suggested to another member who was after a good rom to use this one: http://forum.xda-developers.com/showthread.php?t=2599760 Use S2 touchwizz style with cronmod. Partition your sd first. Instructions are probably on here for that but i just followed this: https://www.youtube.com/watch?v=_U_Sp_BtzrM
I think all the reading I've recently done regarding up/downgrading the ace's software has fried my brain, So I had a couple of days off and just enjoyed using a new phone.
Anyway I can't believe how simple that was Thank you very much, I put in an 8GB SD and set my SD ext to 1GB and all is well, Running nicely too with that rom.
T1Cybernetic said:
I think all the reading I've recently done regarding up/downgrading the ace's software has fried my brain, So I had a couple of days off and just enjoyed using a new phone.
Anyway I can't believe how simple that was Thank you very much, I put in an 8GB SD and set my SD ext to 1GB and all is well, Running nicely too with that rom.
Click to expand...
Click to collapse
I certainly understand the brain frying. Yeah that rom is the best i've found and i've tried most in the past 3 weeks. Glad i could help. :highfive:
CM11 allows you to use a external partition too using S2E script
http://forum.xda-developers.com/showpost.php?p=56309493&postcount=439
Viper The Ripper said:
CM11 allows you to use a external partition too using S2E script
http://forum.xda-developers.com/showpost.php?p=56309493&postcount=439
Click to expand...
Click to collapse
Well i never knew that! I had the PSN cm7.2 + 9 ics + 10.1 jb swapall scripts as zip's but i couldn't find one for cm11. The only thing that put me off the 4.4.4 KK rom was not having swap. Damn i wish my phone was working now I hope the jig works

Categories

Resources