[Q] requirement of sec s5pc210 test b/d driver - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi,
My Samsung Galaxy Note GT-N7000 was in the dead boot position. Suggestion from XDA forum I had done some work after that too the phone is in the same condition but a different the phone is now detected by the computer device manger when I connect through usb. But it requires the driver sec s5pc210 test b/d driver. Please help me in this issue. Thank you
Saravanan

You can try the latest Samsung USB Driver.
Just install it and follow the instructions as said in the thread. Hope it helps

Related

[Q] What drivers are needed for Odin?

Please don't unnecessarily kill any more chickens.
Have you tried Android SDK usb drivers? Someone else on the forum said it works.
Thank you for the reply. But it didn't work. Said can't find "USB Gadget"
hi
i had same problem,i installed samsung pc studio package and managed to flash with odin without any problem
following tutorial in the sdk kit, I got "adp" to recognice my phone from a command prompt in USB debug mode. But when I connect in downloading mode, I get this "Gadget Serial" driver issue. Gadget Serial is not one of the drivers in any of the USB driver packages I downloaded. Anyone know where I can get this?
any answers?
i got the same issue and my phone stuck on the samsung screen restarting over and over
I have posted latest x64 drivers from samsung here on this forum. You can try to use them.
Sent from my GT-I9000 using XDA App
Also restart windows with enforce driver signing disabled. Try other usb ports.
Sent from my GT-I9000 using XDA App
Please please can someone help i was using the new 4.01 ics on samsung galaxy s. Now i cannot conect to pc. I Get an error message all the time saying Usb malfunctioned and i cant use odin to revert back or anything. I have looked everywhere tried reinstalling drivers ect but no joy
I know a while has gone by but just in case someone else stumbles on this thread with the same problem or in case you're still looking for an answer try dialing *#7284# which takes you to the PhoneUtil. Under USB section click on MODEM and then click on USB. Give it a try, it should work
there is a direct download for the nexus drivers found here : http://androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/ , also suggested in another similar post is to clean the usb port of your phone with alcohol and a fine brush(but remove battery if doing so)

[Q] prob with download mode

hello i found this forum great for mod my samsung galaxy s here i found a lot of thinks.
but here is my problem i have already install the samsung kies and android sdk, but when i trie to update my phone with kies the process run normally until it come the time that kies put the phone in download mode, there i receive a messege on the windows task bar like i have disconnected the phone and then it says that "error unknow device" and the upgrade on kies cant go on.
any help plz thanks
i have a att galaxy s rooted
windows 7 32bit
latest version of kies
First thing to try is test each of the different usb ports on your computer - if you get the same error on each port then my first instinct would be to reinstall the samsung drivers for your computer.
If you try reinstalling the drivers below is a link to the drivers that have worked the best for me.
http://www.mediafire.com/?0b45zo7o75rc5d5 - samsung captivate windows 32 bit drivers
thanks for your replay. i already have uninstall the drivers and reinstall them with no success, but i will try to test it in other usb port and report later
this is soo bad i have try both of you recomendations and still says usb device not recognize. then it says no driver was install and when i click that it says on the driver part that windows have stop the device for a error code 43.
i have search a lot and i havent find anything close to my problem can anyone else give recomendations on this or tell me if you know something similar to this happend to other users.
ps - i also try on a win xp 32 with the same result

[Q] odin not recognising my SGS i9000

when I plug in my phone whilst in download mode, Odin doesn't register i.e. the box doesn't turn yellow...can anyone assist?
Thanks
Read my post on your other thread....
Next time please use search as this is a common issue that has been resolved many times before. If you have then please state what you have tried already to stop others from repeating it
download and install samsung drivers or kies from samsung.
you can easily install kies and then unistall it for your samsung usb drivers to stay in your pc
galaxy s usb drivers

Samsung Galaxy S bricked

Hi there!
I bricked my samsung galaxy s by flashing a/the wrong bootloader.
Can´t get into the download mode, nothing happens by pressing any key(s).
Already tried many ways to "awake" my phone (hair dryer method, jig dongle etc), but it still doesn´t work.
So I tried to get into download mode by Resurrector via Ubuntu (running in a virtual box), but only Windows detects an unknown device sec s5p110, but ubuntu doesn´t.
Do I have to install any drivers for Ubuntu???
Is there any chance to get my Samsung Galaxy S work again?
(Because Windows detects an device, I still hope for a solution without sending the phone to Samsung).
Many thanks in advance!
Yeah, found the solution!!!
Run Ubuntu Live CD and start the UnBrickable Resurrector software.
The Resurrector detects the device sec s5p110, choose Samsung Galaxy in the combobox below and click the "DownloadMode"-Button.
(detailed instructions are stated on screen when opening the Resurrector).
Now you got your phone into download mode.
DON´T DISCONNECT from usb and flash your firmware via Heimdall Suite.

[Q] Odin4.43 problem.

Hi..
I am facing an issue with Odin v4.43 .
My Laptop specs are :
USB3.0
HP-pavilion dv6 - 7023Tx (intel i7 3610QM)
OS : Windows 8 -64 bit
.
When i run this application and connect my samsung galaxy S plus device through USB cable, It don't detect Comport nor even displayed "Added" in Message box.
I even installed its 64 bit USB driver but still not. Why?
==================================================================
Whenever i run this application through my old laptop (P4, OS is Windows 7 32 bit and USB2.0 ).
It works and detect the comports and display added in message box.
How could i solve this issue in my new Laptop because i 'll have to leave my old laptop.
Did you already try this:
http://forum.xda-developers.com/showpost.php?p=35227656&postcount=1
hi Gripping,
I installed the same driver on my new laptop but didn't follow the step as mentioned in your refered article.
I try with it then 'll share my experience .
Or this
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
thanks everyone but unfortunately didn't work.
empnetsol said:
thanks everyone but unfortunately didn't work.
Click to expand...
Click to collapse
I was having same problem when I tried to flash with odin (not 4.43). I managed to install the drivers using Heimdall suite 1.3.1. Heimdall comes with drivers folder and a application called zadig inside the drivers folder. It did not work right away but after trail and error it finally showed up as samsung usb driver. sometimes you have to restart your phone to be recognised by your computer. I did on windows 7 too and also I have i9000M. Hopefully will work for you too.
Thanks osterizerble, i have tried many times with different approaches but didn't work.
This is an issue with this machine or might be with 64 bit OS to install its accurate driver completely.
It works smoothly in my old machine without any effort.
It seems Odin V4.43 have the capability to operate through 32-bit systems too.
Thats' the restrictions , i think so.
I have Windows 8 x 64 bit too and I have already successfully flashed a stock Rom to my SGS using Odin.
I used an older version of Odin, I think it's version 1.3.
But my phone wasn't recognized immediately by the PC.
I think it took 2 or 3 times re-starting and re-booting my phone & PC before my phone was finally recognized by Odin.
I used the USB drivers from SamHaLeKe's thread:
http://forum.xda-developers.com/showpost.php?p=11498043&postcount=1
Thansk Gripping and everyone for putting an effort of resolution.
Gripping I am pretty sure,Odin 4.43 will not work.
because i have been tried too mauch with every USB driver with Samsung Kies and after uninstalling it too.
I used SAMSUNG USB Drivers for Mobile Phones (x86 & x64) v1.5.16.0 driver too but it couldn't worked.
Yes Old , I think Odin 3 V1.8 detect Comports and display a message "Added" in Message box.
But i have tried it too, it start flashing and then stuck in no limit of time.
Moreover, i 'll make another try today night again. Hope this may help but i have already tired with it .
It's a good thing nothing happened to your phone when it got stuck in the middle of flashing.
It happened to me twice already, during flashing via Odin, it got stucked and won't continue running. (In my old Windows 7 and recently with Windows 8)
I have no choice but to close Odin and disconnect my phone.
After disconnection, my phone became "hard-bricked". No buttons responding whatsoever.
I was lucky (twice already) to revive my phone and brought it to download mode by doing the following:
1. remove the battery for a few minutes
2. connect the phone to PC via USB cable
3 press the vol down - home button - power buttons and at the same time insert the battery.
After reviving my phone, flashing via Odin became smooth already.
My computer is still giving a same message.
USB drive not recognized and when i come into the device manager, it display 3 wrong things in Other devices.
-> PCI Device
-> Unknown device.
->Unknown device.
empnetsol said:
My computer is still giving a same message.
USB drive not recognized and when i come into the device manager, it display 3 wrong things in Other devices.
-> PCI Device
-> Unknown device.
->Unknown device.
Click to expand...
Click to collapse
Try this may be
http://forum.xda-developers.com/showthread.php?t=2038555
i have already tried with it.
As i Gripping suggest in his first post.
My computer is not recognizing this device.
Moreover, i have tried with solution again but same response.
It says "The best software for your device is already installed".
but i connect my phone, it add three more devices with error as i mentioned in above post.
It shows in device manager "SAMSUNG USB Composite Device".
and when i see the device status
it displays
This device cannot start. Code 10
A request for the USB BOS descriptor failed.

Categories

Resources