Related
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot
Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.
well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine
U can also try different cable, just to be sure its not the cable that is causing these problems.
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?
Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing
I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)
I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?
I have AT&T 8925, live in United States, Run on a Dutty Rom and pretty much everything else is simple. No serious tweaking or reg hacks.
So Today, I go into work, plug in my PDA, and no sync. It is charging via the USB, but not syncing to Activesync. I need Activesync, it has all my contacts, appointments, etc etc. In the process of trying to troubleshoot this problem I have wiped my phone clean.
I have tried it all;
clearing storage on phone
deleting activesync off PC (4.5) and reinstalling, multiple times
Used Microsfts Troubleshooting guide
I have installed Activesync on three different PC's and all wont recognize the phone, as if its not there, but it does charge. I also have tried 3 different USB cords.
I don't know what to do, I even stumped the HTC troubleshooting tech guy. I also am screwed since if I send this phone back to AT&T under warranty to get a new one they will see the Dutty ROM and that will void my warranty. I would reinstall the original Windows/AT&T shipped Rom, but I cant get the Activesync up or don't know how to get a PC to recognize my PDA.
So.........I beg and plead, lend your advice for as long as this thread goes (hoping its in the right place) I will try your ideas, theories, and what nots.
IT seems like it would just be something so simple......is it? Where is my Data Connection.....
Thank you fellow XDA members for your time and assistance.
~b
Do you get the "connecting" sound on the PC when you plug the device (same one you get when plugging any USB device)? If not I'd go for hardware fault on the phone's USB port... maybe one of the connector's solder points got ripped or whatever. That's if the port isn't fried altogether... Done anything special between the last time it worked and the first one it didn't?
This may be obvious...but did you restart your computer and hard reset your phone, then try? Im using vista and ive had no problems with any roms...so it just maybe a temporary problem.
Also test this while using the back USB ports, the front ports do not connect the same as the back ports do.
When my new Tilt's screen died an untimely death, I spent all day restoring all my goodies to the replacement Tilt. The next day, went to ActiveSync, and NOTHING! Charged, etc, but no connection. I did all the steps you tried and a few more.
Then, after wasting an entire evening, I found the solution!
Go to Connections>USB to PC, and uncheck 'Enable advanced network". Plug it and let 'er sync.
jlmwrite said:
When my new Tilt's screen died an untimely death, I spent all day restoring all my goodies to the replacement Tilt. The next day, went to ActiveSync, and NOTHING! Charged, etc, but no connection. I did all the steps you tried and a few more.
Then, after wasting an entire evening, I found the solution!
Go to Connections>USB to PC, and uncheck 'Enable advanced network". Plug it and let 'er sync.
Click to expand...
Click to collapse
ahaha yea i thought graff had already checked the software so i didnt bother going into that
I suggest u try to search, there is a search option - type there something like "cannot conect to activesync" - there are milions of threads with this problem, unfortunately I dont know if there will be a solution for u. Just try that out and read.
This happened to me and I had to send my phone in to at&t. I know this probably wasn't what you wanted to hear. They sent me another phone and gave me 10 days from the day I received the new phone to send back the old. I also had the same rom as above I couldn't even flash it via sd card, so I sent it as was and haven't heard anything since. This was two months ago. The problem turned out to be with the mini usb port, it was warped like it got to hot or something. Maybe from using in car for gps I don't know. I hope this helps.
answers and bump
As for searching........always someone has to say it, "why dont you try the search option" - my friend, I am a google allstar and beleive in the forum searching till you can no more then post theory. Now saying that, I am willing to bet the answer to my problem is buried within a post in some thread with some fabric of the entire XDA forum. Finding it though can be harder than removing bubblegum from buckwheats hair.
So I have tried a hard reset for the PDA and the restarted my PC, several times.
...no go
I knew something was wrong when I lost the "ding" every time I hooked up the PDA via USB to my computer.
I had tried the unchecking the Enable Advanced Network before but did again and reset the phone with hopes of glory today. No glory.
I feel I have lost the phone and am ready to move on. Its just so friggen hard since it charges. How can it charge, and not stream data! I fried just the right parts of the mini USB? Blasted! So so so so disappointing because I felt I really had it nailed this time with the perfect radio, ROM, Dialer, programs, software, it all.....well maybe not radio, but my receptions suck all the time anyways and I live in Charlotte NC, a major US city with great AT&T coverage.
Now.....I am still open to any ideas and creative thoughts......but how do I get a the original WM6 Shipped ROM back on the phone? If I cant get any PC to recognize my PC via USB? I am calling in the warranty people today and not speaking of my Dutty, but having a new phone shipped. I just hope not to see a nasty bill come one month or two.
Thanks so far, well done XDA forum friends,
~b
donroja said:
This happened to me and I had to send my phone in to at&t. I know this probably wasn't what you wanted to hear. They sent me another phone and gave me 10 days from the day I received the new phone to send back the old. I also had the same rom as above I couldn't even flash it via sd card, so I sent it as was and haven't heard anything since. This was two months ago. The problem turned out to be with the mini usb port, it was warped like it got to hot or something. Maybe from using in car for gps I don't know. I hope this helps.
Click to expand...
Click to collapse
.....I am curious for you. Two months seems like your in the clear, but I hope not to jinx you. I have done the whole 10 days thing 6 times so far since the original purchase of my 8525 in August of 2007. Wasn't until the 5th time I complained and they offered me the 8925 as a replacement. The first five were all shipped back on time, with original ROM's and valid device malfunctions. Never have I been billed.....yet........
~b
graff40b said:
As for searching........always someone has to say it, "why dont you try the search option" - my friend, I am a google allstar and beleive in the forum searching till you can no more then post theory. Now saying that, I am willing to bet the answer to my problem is buried within a post in some thread with some fabric of the entire XDA forum. Finding it though can be harder than removing bubblegum from buckwheats hair.
So I have tried a hard reset for the PDA and the restarted my PC, several times.
...no go
I knew something was wrong when I lost the "ding" every time I hooked up the PDA via USB to my computer.
I had tried the unchecking the Enable Advanced Network before but did again and reset the phone with hopes of glory today. No glory.
I feel I have lost the phone and am ready to move on. Its just so friggen hard since it charges. How can it charge, and not stream data! I fried just the right parts of the mini USB? Blasted! So so so so disappointing because I felt I really had it nailed this time with the perfect radio, ROM, Dialer, programs, software, it all.....well maybe not radio, but my receptions suck all the time anyways and I live in Charlotte NC, a major US city with great AT&T coverage.
Now.....I am still open to any ideas and creative thoughts......but how do I get a the original WM6 Shipped ROM back on the phone? If I cant get any PC to recognize my PC via USB? I am calling in the warranty people today and not speaking of my Dutty, but having a new phone shipped. I just hope not to see a nasty bill come one month or two.
Thanks so far, well done XDA forum friends,
~b
Click to expand...
Click to collapse
About the flashing original rom- u dont need a activesync for that, u can flash the rom via SDcard.
Mikulec said:
About the flashing original rom- u dont need a activesync for that, u can flash the rom via SDcard.
Click to expand...
Click to collapse
True, but forst I gotta get my mini back in the full size adapter then find a friend with a printer that accepts my scandisk so I can transfer the file over to it. Right now at work trying to save the file to the storage card via wifi. Shall be interesting to see if it works. Didnt on phone, said not enough mem.
Thanks for the suggestion, was so hooked on USB, forgot the other various aspects of the all great HTC.
~b
Related software for Microsoft ActiveSync 4.5
Java Runtime Environment 1.6.0.2 (updated) Java software allows you to run applications called "applets" that are written in the Java programming language. These applets allow
.NET Framework Version 3.0 The Microsoft .NET Framework 3.0 is the new managed code programming model for Windows®. It combines the power of the
DirectX 9.0 Microsoft DirectX is a group of technologies designed to make Windows-based computers an ideal platform for running and displaying applications
ATI Catalyst Drivers The latest Windows XP drivers and software for the Radeon range of ATI graphics cards. Includes: * Catalyst XP Drivers
Thats just some of it, it is more to it. I use xp anyways. You mention reinstalling active sync but have you tried .NET Framework Version 3.0 ? If the device charge via usb I would suspect its software issues on youre pc. Could be bad version of some of the software aswell, try download again making sure its the latest and so on. Good luck
Edit: Why dont you back everything up and reflash from microsd and then see if it will connect. Should solve it.
raiisak said:
Related software for Microsoft ActiveSync 4.5
Java Runtime Environment 1.6.0.2 (updated) Java software allows you to run applications called "applets" that are written in the Java programming language. These applets allow
.NET Framework Version 3.0 The Microsoft .NET Framework 3.0 is the new managed code programming model for Windows®. It combines the power of the
DirectX 9.0 Microsoft DirectX is a group of technologies designed to make Windows-based computers an ideal platform for running and displaying applications
ATI Catalyst Drivers The latest Windows XP drivers and software for the Radeon range of ATI graphics cards. Includes: * Catalyst XP Drivers
Thats just some of it, it is more to it. I use xp anyways. You mention reinstalling active sync but have you tried .NET Framework Version 3.0 ? If the device charge via usb I would suspect its software issues on youre pc. Could be bad version of some of the software aswell, try download again making sure its the latest and so on. Good luck
Edit: Why dont you back everything up and reflash from microsd and then see if it will connect. Should solve it.
Click to expand...
Click to collapse
You are wise my friend. Thank you for the other software, I will try that. Funny thing about the PC, is I have tried three different PC's, all which it used to sync or try to sync with when I would just be charging. I would love to flash via SD card, but first I need the adapter for my computer, or track a friend down with a printer and correct slot. That might be done tonight. I am at work now trying to download the a rapidshare file of a shipped rom, free style, slow style, and prolly not going to work. But hey, its a learning experience.
Either way, my warranty is up in August, so I figure why not get one more nice new fresh 8925 before then. Ordered new one today, comes next week. I will still try and flash back to the shipped rom via SD tonight.
XDA and its members Rock, this is by far the most help I have ever received via my few threads.
~b
graff40b said:
You are wise my friend. Thank you for the other software, I will try that. Funny thing about the PC, is I have tried three different PC's, all which it used to sync or try to sync with when I would just be charging. I would love to flash via SD card, but first I need the adapter for my computer, or track a friend down with a printer and correct slot. That might be done tonight. I am at work now trying to download the a rapidshare file of a shipped rom, free style, slow style, and prolly not going to work. But hey, its a learning experience.
Either way, my warranty is up in August, so I figure why not get one more nice new fresh 8925 before then. Ordered new one today, comes next week. I will still try and flash back to the shipped rom via SD tonight.
XDA and its members Rock, this is by far the most help I have ever received via my few threads.
~b
Click to expand...
Click to collapse
Post your results then.
Everybody knows that xda rulez.
Hi all,
Since a week I can't use active sync, or acces my drive (Diamond Touch)
Battery charging as normal, I tried other mini USB cable, 3 computers, reinstalled active sync (4.5) Also tried different ROM's , hard reset. So I thought the connector is broken or something and went to a store where they repair PDA and stuff. The man told me that the connector was fine and his idea was the hardware port is damaged. Anyone who had the same, or maybe something else what can help me.
I guess I need T mobile Rom before I send it back for warrenty.
Thx in advanced...
can you access drive on the computer or on the phone as well?
Did you hard reset and clear storage as well?
Don't forget to put HSPL back as well if your sending it back
Hi thx for the reply, yes i can acces it on the phone, not computer. And yes i got the original from Tmobile( ugly skin!) Got download it with Wifi. so i guess im pretty save for the warranty.
Ok heres the story,
Sold my phone on Fleabay, however want to unlock it from its grips of T-Mobile.
Before you ask i have had about 3 different WM phones all of them i have flashed..
Now with this phone everything is abit different?!? i install Hard SPL... Well it gets to the 3 colour screen goes to USB then will go to the progress bar sit for a while and then i will recive a connection problem...
Now i have tried unplugging the usb at this point and putting it back in at the 3 colours... i have done the same but disabled usb connection in active sync.. i then thought if im getting this boot loader it must be installed?!?
tried installing a rom same error.....
i then thought maybe its all communication going to phone.... it active syncs fine etc.... it even updates with the new t-mobile rom.... everything else is not communicating .... someone please help im about to throw it out the window??!?
xda_kerby said:
Ok heres the story,
Sold my phone on Fleabay, however want to unlock it from its grips of T-Mobile.
Before you ask i have had about 3 different WM phones all of them i have flashed..
Now with this phone everything is abit different?!? i install Hard SPL... Well it gets to the 3 colour screen goes to USB then will go to the progress bar sit for a while and then i will recive a connection problem...
Now i have tried unplugging the usb at this point and putting it back in at the 3 colours... i have done the same but disabled usb connection in active sync.. i then thought if im getting this boot loader it must be installed?!?
tried installing a rom same error.....
i then thought maybe its all communication going to phone.... it active syncs fine etc.... it even updates with the new t-mobile rom.... everything else is not communicating .... someone please help im about to throw it out the window??!?
Click to expand...
Click to collapse
What does it say on the bootloader screen ? Is it unlocked and flashed with Hard Spl,? If so try and flash it from an SD card.
Hi, so i bricked my mobile, as much as possible. Every single "unbricking program" cant download bootloader or something like that, and when i connect it to smartflash it wont even show me COM port or anything, im running windows 8, in that mod to use drivers, but, well still cant do anything about it... Can't even get to the S/W Upgrade Screen. So im unable to do anything.
Please install NVflash drivers by disabling driver signature in windows 8! It's very simple, please Google it!
Use AIO Toolkit V3, best Toolkit IMO.
Try it on a different usb port, other computer, change cable. Try other nvflash packs. Reinstall drivers or windows. If it still fails replace the phone's usb port. After all these changes it still fails you need a new phone.
Sent from my LG-P990 using xda app-developers app
Well, done long before, dont worry . No my mobile wont react on anything. I can also try it on Windows 7, but i have installed drivers on W8. But i will give it a shot... Also as my mobile is (it looks like) completely dead, is there any chance of sending it back and getting new one ?
it's time for a new phone maybe
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
So, i tried it today on one Windows 7 device, had a little bit more luck, but... Still i cant run my phone, as i flashed it succesfully, i dont like it... I still have warranty, ill give it a last try, and then, ill try to send it to Samsung CZ (in our country LG dont have any seller) Hopefully they will dont find out i broke warranty, and they will repair my phone. I have no money for new one as i just purchased new PC... :-/
I tried Topgigis, and also used Windows 7 device, than i plugged my mobile on charger, after half hour i heard that annoying LG startup sound, my eyes was like 6 year old after getting remote helicopter... ^_^ So, if anyone of you used Topgigis, (i want to be really carefull right now) Did you updated it using SP2, or that second one,i mean full ROM flashable through CWM (i want to flash it just if it is based on 30A or something like that)