i was doing a manual update through Odin started the process off and then went to fetch a drink from kitchen, came back to laptop Odin had finished the process and had PASS written in box, but the phone itself is now lifeless will not switch on will not do anything.
can anyone help me?
rumbo76 said:
i was doing a manual update through Odin started the process off and then went to fetch a drink from kitchen, came back to laptop Odin had finished the process and had PASS written in box, but the phone itself is now lifeless will not switch on will not do anything.
can anyone help me?
Click to expand...
Click to collapse
Do you have I9070P??? If so, your phone is bricked. Take it to service.
If not, can you go to download mode?
shut_down said:
Do you have I9070P??? If so, your phone is bricked. Take it to service.
If not, can you go to download mode?
Click to expand...
Click to collapse
yes it is i9070p, if its bricked is there nothing i can do?
Oh, i'm sorry but as shut_down said there is nothing you can do. Just service.
Sent from my GT-I9070 using xda app-developers app
rumbo76 said:
yes it is i9070p, if its bricked is there nothing i can do?
Click to expand...
Click to collapse
Developer CallMeVentus bricked his that way, and he took it to warranty. No way you can fix it by yourself. You should read first.
rumbo76 said:
i was doing a manual update through Odin started the process off and then went to fetch a drink from kitchen, came back to laptop Odin had finished the process and had PASS written in box, but the phone itself is now lifeless will not switch on will not do anything.
can anyone help me?
Click to expand...
Click to collapse
ppls dont post in Dev forum for Q's! we will help you even if you post in the Q&A Subforum(dunno what it appears as in your browser,but i think its pretty clear!) as for bricking,only way is to take it to service.
I'm sorry. I hope you can fix it with the service. Best of luck!
shut_down said:
Developer CallMeVentus bricked his that way, and he took it to warranty. No way you can fix it by yourself. You should read first.
Click to expand...
Click to collapse
Okay , I feel that a sticky is needed to prevent more deaths
"Viper kills.....again!"
Одг: [Q] Help needed to revive dead S Advance
CallMeVentus said:
Okay , I feel that a sticky is needed to prevent more deaths
"Viper kills.....again!"
Click to expand...
Click to collapse
Yes, one with title: Do not flash I9070 roms and firmwares to I9070P. Duble check before do some instalation.
Sent from Galaxy S Advance
R: [Q] Help needed to revive dead S Advance
You can try a tool like One click unbrick
Sent from my GT-I9070 using xda app-developers app
Related
Dear all
I have brick my GT-S5830 when downgrading it by odin and S5830XXJLC stock ROM... Now I can’t be able to power it on or goes in DOWNLOADING mod…
I was stuck on downgrading process..And unplug the cable manually from Computer..After that it can’t be powered on and also can’t able to go on downloading the mod…
Any suggestion for fixing this problem??
itsmerabbi said:
Dear all
I have brick my GT-S5830 when downgrading it by odin and S5830XXJLC stock ROM... Now I can’t be able to power it on or goes in DOWNLOADING mod…
I was stuck on downgrading process..And unplug the cable manually from Computer..After that it can’t be powered on and also can’t able to go on downloading the mod…
Any suggestion for fixing this problem??
Click to expand...
Click to collapse
Go to samsung service center and say the phone turns off while updating via kies
Sent from my GT-S5830 using xda premium
itsmerabbi said:
Dear all
I have brick my GT-S5830 when downgrading it by odin and S5830XXJLC stock ROM... Now I can’t be able to power it on or goes in DOWNLOADING mod…
I was stuck on downgrading process..And unplug the cable manually from Computer..After that it can’t be powered on and also can’t able to go on downloading the mod…
Any suggestion for fixing this problem??
Click to expand...
Click to collapse
Download DDKQ8 and flash via Odin, it is much better.
Sent from my GT-S5830 using xda app-developers app
Never tried this method, read it somewhere in thread, give it a try
Remove the battery and now press the buttons for downloading mode and simultaneously insert the battery,
It might get into download mode as said in that thread
If u get dld mode then flash ddkq8 by Odin
Sent from galaxy ace running S3 beta 3.1 evolution
Questions should be posted in the appropriate section.
15. Keep posts/threads on-topic
Whilst a minor amount of off-topic posting may be overlooked, the general rule is your posts / threads must be relevant to the Forum / thread in which you are posting.
Click to expand...
Click to collapse
I'm moving this one.
http://forum.xda-developers.com/showthread.php?t=1071970
This should work. It was already mentioned above, sort of, but a full thread on unbricking wouldn't hurt. Also, when said to prepare ODIN it means to click on PDA and choose the rom you're going to flash. Everything else seems clear.
eagleeyetom said:
Questions should be posted in the appropriate section.
I'm moving this one.
Click to expand...
Click to collapse
Thanks for this....
hirohito_protagonist said:
http://forum.xda-developers.com/showthread.php?t=1071970
This should work. It was already mentioned above, sort of, but a full thread on unbricking wouldn't hurt. Also, when said to prepare ODIN it means to click on PDA and choose the rom you're going to flash. Everything else seems clear.
Click to expand...
Click to collapse
I have tried this but it isn't working for me....
I flashed via CWM MUI v.3 cuz the v.4 needed v3 due a bug but it hang on flashing boot.IMG. so i had to took out battery. Since then no charging / detection / download mode by buttons. Possible Ultimate brick?
Can access recovery mode?
Thanks
dr.ketan said:
Can access recovery mode?
Click to expand...
Click to collapse
Dr. Ketan,
Black screen no detection no recovery
First make sure your battery is not completely empty. Try to charge with external charger or manage for other battery
Still nothing then manage for JIG as last option
Dr. KEtan,
I bricked the note with 95% then removed battery to prevent drain while briked. Will try JIG tonight., Will let u know
jeroen180 said:
Dr. KEtan,
I bricked the note with 95% then removed battery to prevent drain while briked. Will try JIG tonight., Will let u know
Click to expand...
Click to collapse
Jigged it... Its confirmed. It is the SUPER-brick. Superbrick via CWM wattaf...
jeroen180 said:
Jigged it... Its confirmed. It is the SUPER-brick. Superbrick via CWM wattaf...
Click to expand...
Click to collapse
What do you think it is related with brick? Is it your fault of kernel or ROM fault. It is really annoying situation... Im sorry for your loss man...
Im not really an expert on android, but i would consider myself an advanced user so correct me if im wrong....
Couldnt it be, that the boot.img from the rom got corrupted somehow and thats the reason why it hanged while flashing it? Coz as of how i understood what the boot.img is used for, it would explain why u cant boot in recovery/dl-mode. Simply coz there is no bootloader on ur phone. Just an idea...
Sent from my GT-N7000 using xda premium
shrooms90 said:
Im not really an expert on android, but i would consider myself an advanced user so correct me if im wrong....
Couldnt it be, that the boot.img from the rom got corrupted somehow and thats the reason why it hanged while flashing it? Coz as of how i understood what the boot.img is used for, it would explain why u cant boot in recovery/dl-mode. Simply coz there is no bootloader on ur phone. Just an idea...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Worth a try
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Worth a try
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If they found out its my fault.. .will they charge or call me to fix it foor like.... 200 ~ 300 EU?
I have warned in hydracore thread that CWM 6.0.1.2 caused me and another user from a different thread to softbrick.
I got bashed by the fanatics in return.
Sorry to hear about your incident.
praetorius said:
I have warned in hydracore thread that CWM 6.0.1.2 caused me and another user from a different thread to softbrick.
I got bashed by the fanatics in return.
Sorry to hear about your incident.
Click to expand...
Click to collapse
LoL i should read that..... Im getting JTAGGED soon..
jeroen180 said:
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Click to expand...
Click to collapse
Looks like MIUI bug
Look hère : http://miuiandroid.com/community/index.php?threads/17408/
Envoyé depuis mon GT-N7000
@jeroen180 send it in, they wont notice, just tell them ur phone got slow sow u did a factory reset and now it refuses to boot send my sgs in that way, before the jig was know, and my gf sent her sgs plus in abot 2 weeks ago with the same story
Sent from my GT-N7000 using xda premium
Yeah, I agree, if you tell them you just had to do a factory reset because it got really slow and laggy than they shouldn't have a problem. They wouldn't bill you either unless they had prior authorization.
netopyr said:
Looks like MIUI bug
Look hère : http://miuiandroid.com/community/index.php?threads/17408/
Envoyé depuis mon GT-N7000
Click to expand...
Click to collapse
First off before you start quoting other threads in other fourms, take a minute to get your facts in order.. Miui for the note has not been released to the public as of this date because it has the possibility to brick you device as it has the unsafe Samsung kernel (yes the same kernel as your stock note ), so if your running Miui on your note than your running a leaked version (then in that case you should know the risk involved) that is either running the stock kernel or it has one of the hydracore versions as it is the only option miui has at the moment unless your on one of the cm versions. So not defending either the rom/kernel he was trying to flash or what he was coming from as he really doesn't state either .. it would help if he provided such information. Sorry to the owner but before you get your device JTAGGED you may want to check with a samasung service center because the JTAGGED will void your warranty..
jeroen180 said:
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Click to expand...
Click to collapse
No ,CWM will not erase or even touch the bootloaders ,only PC ODIN can do that ,boot.img refers to the kernel ,I've had a corrupted boot.img flash once ,easily solved via PC ODIN ,the phone would start up and show the logo but nothing more if that happens .I doubt that's the case here but you could try a blind flash in PC odin and see if that works .
MR.change said:
No ,CWM will not erase or even touch the bootloaders ,only PC ODIN can do that ,boot.img refers to the kernel ,I've had a corrupted boot.img flash once ,easily solved via PC ODIN ,the phone would start up and show the logo but nothing more if that happens .I doubt that's the case here but you could try a blind flash in PC odin and see if that works .
Click to expand...
Click to collapse
How you explain the phone stays black screen after hanging in CWM with boot.img? U suggest my board broke by accident? Someone can explain?
Could it be,
that,,,, i forgot to reboot after flashing the Hydrakernel... and eMMC bricked the bootloader perhaps? since the bootloader is stored on the chip as well?
Hello,
Earlier my GNote went to downloadmod and CWM :good: but when I flash any firmware it stucked at "factoryfs", :crying:
I tried to flash a pit file and I have flashed "N7000_16GB_Q1_20110914--patched--brick-between-1174-and-12985-MB--DATAFS-moved-by-11264-MiB.pit" while the flashing it stucked.:crying:..
I DON'T KNOW WHY...
I unplug the cable from the phone and tried to turn it in to download mod again, It wont turn on..
I plug it to the PC, It wont turn on or recognize :crying::crying::crying:
Please help me with this...... I want my GNote Back..
Thank you....!!!
amjiffy70 said:
it stucked at "factoryfs"
Click to expand...
Click to collapse
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
Haha +1 gotta love your sarcasm... xD... "Bricked your device successfully" ~
Tapatalking on my n7000
Take a look here and here..
ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
I have searched and read a lot of forums I think the only way to fix this is JTAG method right? and no any other way to fix this... :crying::crying:
andreaonelove said:
Take a look here and here..
Click to expand...
Click to collapse
When I plug my GNote to PC it does not recognize.. and ODIN also does not recognize... :crying::crying:
I think this is the only way...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
amjiffy70 said:
When I plug my GNote to PC it does not recognize.. and ODIN also does not recognize... :crying::crying:
I think this is the only way...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
Click to expand...
Click to collapse
JTag cannot help you, I'm afraid. There's not been a single report of successfully JTagging Note back to life after a superbrick.
Mobo replacement is the only solution.
Sent from Nexus 7
chasmodo said:
JTag cannot help you, I'm afraid. There's not been a single report of successfully JTagging Note back to life after a superbrick.
Mobo replacement is the only solution.
Sent from Nexus 7
Click to expand...
Click to collapse
I went to a local shop and asked them, they told me that It can be fix by a JATAG, and they told me, has to make a BOOTLOADER and should replace that.
I dont know anything about this, If they can fix it I will tell the result...:good::good::good::good:
amjiffy70 said:
I went to a local shop and asked them, they told me that It can be fix by a JATAG, and they told me, has to make a BOOTLOADER and should replace that.
I dont know anything about this, If they can fix it I will tell the result...:good::good::good::good:
Click to expand...
Click to collapse
Jtag won't fix a burned chip... It's hardware damage and seems like you won't understand that
Tapatalking on my n7000
msedek said:
Jtag won't fix a burned chip... It's hardware damage and seems like you won't understand that
Tapatalking on my n7000
Click to expand...
Click to collapse
hmm so is there anyway to fix this?
amjiffy70 said:
hmm so is there anyway to fix this?
Click to expand...
Click to collapse
There's no fix.. If you have warranty use it if not then pay for a mobo replacement
Tapatalking on my n7000
Samsung has a good after sales service, If your warranty is not over I think you have good chance to get it replaced with a new one.. try contact directly samsung support through their web site...
Obviously you don't have to say that you have bricked your phone trying to flash a custom rom...
Let us know!
turn on
guys now I can enter the downloadmod again. and odin detect my Gnote.. but the problem is I am still stucked at
factoryfs.img
Click to expand...
Click to collapse
..
I rooted the phone via odin and now I can go to the CWM too.. after that I installed the
AbyssNotekernel42RedTouchCustomLogo
Click to expand...
Click to collapse
and restart the phone then I reset everything, factory data/wipe cache/wipe delvik.... and I tried to install costom roms
XXLA4_CheckromRevo_NoteHD_V5, CriskeloRomNOTE.vICS-V11.2-MD5-7FEDC9597F42C0E9CA2AE4673E84798B
Click to expand...
Click to collapse
but after installed a rom and restart the phone it wont go to the system.. it stucked at
Samsung GALAXY Note GT-N7000
Click to expand...
Click to collapse
and keep restarting.. :crying:
is there any solution for this situation?
andreaonelove said:
Samsung has a good after sales service, If your warranty is not over I think you have good chance to get it replaced with a new one.. try contact directly samsung support through their web site...
Obviously you don't have to say that you have bricked your phone trying to flash a custom rom...
Let us know!
Click to expand...
Click to collapse
friend I dont have warranty for my GNote .. thats why I want your help guys...
amjiffy70 said:
guys now I can enter the downloadmod again. and odin detect my Gnote.. but the problem is I am still stucked at ..
I rooted the phone via odin and now I can go to the CWM too.. after that I installed the and restart the phone then I reset everything, factory data/wipe cache/wipe delvik.... and I tried to install costom roms but after installed a rom and restart the phone it wont go to the system.. it stucked at and keep restarting.. :crying:
is there any solution for this situation?
Click to expand...
Click to collapse
Are you sure your note is N7000?
Sent from my GT-I9300 using xda premium
cousiver said:
Are you sure your note is N7000?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yep bro... do you know any solution for this?
have you tried with the right pit file?
nokiamodeln91 said:
have you tried with the right pit file?
Click to expand...
Click to collapse
yep I tried with and wothout
Q1_20110914_16GB.pit
Click to expand...
Click to collapse
still the same problem.. :crying:
for these firmwares;
N7000DDLP8_N7000ODDLP5_SLK
N7000DDLR6_N7000ODDLR2_SLK
N7000XXLA3_N7000OXALA3_OXA
Samsung-Updates.com-GT-N7000_INU_1_20120514221949_hbznmf1h8e
You said you tried to install XXLA4_CheckromRevo_NoteHD_V5.
was this successful using CWM?, if yes then after the installation, did you do a factory wipe?
ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
hey bro now
I UNBRICKED MY GNOTE SUCCESSFULLY..
Click to expand...
Click to collapse
I have a Samsung device Galaxy SIII Mini (GT-I 8190)
Accidentally installed a version that was not his, and knocked on the recovery, and now my device does not get any updates, not through the OTA and automatic updates, simply the recovery screwed.
I tried to change version, and restore the original version and it did not help ..
By the way, every time a version I do, he gets stuck, and I must do him param then he recovers back. No param is stuck in the front window.
You know how you fix it please?
I dont think that any update was published.
Sent from my GT-I8190 using xda app-developers app
.
ppero196 said:
I dont think that any update was published.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Well, what shall I do?
Can fix this?
Maybe flash an official firmware from the start and do a hard reset (after the flashing).
That should definitely install the official recovery again!
quendil said:
Maybe flash an official firmware from the start and do a hard reset (after the flashing).
That should definitely install the official recovery again!
Click to expand...
Click to collapse
How do I do this?
salah_nahi said:
How do I do this?
Click to expand...
Click to collapse
You can download a new firmware from sammobile.com and then use the following guide for instructions:
http://www.tsar3000.com/Joomla/inde...and-stock-firmware&catid=57:how-to&Itemid=104
I tried what you said .. It did not help .. Still in the same situation
Sent from my GT-I8190 using xda app-developers app
salah_nahi said:
I tried what you said .. It did not help .. Still in the same situation
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Was your flash succesful and did you do a hard reset after the flash?
Can you describe us EXACTLY (by letter) what your device does?
.
quendil said:
Was your flash succesful and did you do a hard reset after the flash?
Can you describe us EXACTLY (by letter) what your device does?
Click to expand...
Click to collapse
I did install the original version, the installation is completed to the end ..
After doing the installation device stuck, I could not do anything to him, not a hard reset, or anything that is stuck and went to recovery.
The device remains stuck until I did a setup to PARAM
Well, the way I understand I need to Install a new ClockworkMod Recovery..
Where can I get this file please?
salah_nahi said:
Well, the way I understand I need to Install a new ClockworkMod Recovery..
Where can I get this file please?
Click to expand...
Click to collapse
There is no cwm recovery for our phone yet.
quendil said:
You can download a new firmware from sammobile.com and then use the following guide for instructions:
http://www.tsar3000.com/Joomla/inde...and-stock-firmware&catid=57:how-to&Itemid=104
Click to expand...
Click to collapse
quendil said:
There is no cwm recovery for our phone yet.
Click to expand...
Click to collapse
How I saw that s iii mini and the sii is the same system and the same processor and the same data to both devices,
what do you say? I can try the cwm recovery of the S II on my device?
salah_nahi said:
How I saw that s iii mini and the sii is the same system and the same processor and the same data to both devices,
what do you say? I can try the cwm recovery of the S II on my device?
Click to expand...
Click to collapse
please dont do it. you risk bricking your phpne.
quendil said:
please dont do it. you risk bricking your phpne.
Click to expand...
Click to collapse
Well then I will not do anything,
I understand that I have to wait until a CWM to my device ..
Right?
salah_nahi said:
Well then I will not do anything,
I understand that I have to wait until a CWM to my device ..
Right?
Click to expand...
Click to collapse
yes mate as we all do.
there is a guide for building cwm in xda university
if i get time i might study a bit for it.
quendil said:
yes mate as we all do.
there is a guide for building cwm in xda university
if i get time i might study a bit for it.
Click to expand...
Click to collapse
So come on, when you have something suitable for my device do not forget me ..
And really I thank you for helping me.
Thanks man :good:
salah_nahi said:
I did install the original version, the installation is completed to the end ..
After doing the installation device stuck, I could not do anything to him, not a hard reset, or anything that is stuck and went to recovery.
The device remains stuck until I did a setup to PARAM
Click to expand...
Click to collapse
sorry my english is not so good
I have exactly the same problem I do not come purely from recopvery menu
already tried everything from nor even with ADB hardreset not one time with the code * # 87976633 #. if I pull on it ne other firmware I've also the problem that the programs I had before the bottles are then on it is still there or twice since
there may be the possibility to erase the phone completely, format as in the PC hard drive???
or what can I do otherwise??
[FONT="<font><font>Arial Black</font></font>"]I needed help penetrate[/FONT]
jony1512 said:
sorry my english is not so good
I have exactly the same problem I do not come purely from recopvery menu
already tried everything from nor even with ADB hardreset not one time with the code * # 87976633 #. if I pull on it ne other firmware I've also the problem that the programs I had before the bottles are then on it is still there or twice since
there may be the possibility to erase the phone completely, format as in the PC hard drive???
or what can I do otherwise??
[FONT="<font><font>Arial Black</font></font>"]I needed help penetrate[/FONT]
Click to expand...
Click to collapse
Probably your problem is like mine, you have the recovery fails, and you can not do anything, that recovery is available now, so have to wait
Current Status is no display and getting slightly heated when battery is in also PC is not detecting it.
I had installed offcial Indian 4.1.2 JB [N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar] Rom from SamFirmware.
I just tried to root it with philz_touch_6.07.9-n7000.zip but it failed to install in Stock Recovery and after that it got Boot loop error n also it was giving error to boot into stock recovery.
So I tried to re-flash it with this one N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar but it failed just after FactoryFS.
After that I did some searching and got some knowledge about pit file flashing from here (http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/) and I flashed it with this [Q1_20110914_16GB] PIT file.
On ODIN I got PartitionSET,failed and My Galaxy Note got totally Dead. :crying:
Is there any way to fix it? Please help me
XDA-Developers
Click to expand...
Click to collapse
cause My Note's warranty is over. [ Sorry for bad english]
Can you still use download and/or recovery mode?
Azeazezar said:
Can you still use download and/or recovery mode?
Click to expand...
Click to collapse
No Bro. Even my PC is not detecting when I plugging data cable. :crying:
n33l_ray said:
No Bro. Even my PC is not detecting when I plugging data cable. :crying:
Click to expand...
Click to collapse
Then its probably going to require a JTAG.
Azeazezar said:
Then its probably going to require a JTAG.
Click to expand...
Click to collapse
Please sho0w me the way to do JTAG.
n33l_ray said:
Please sho0w me the way to do JTAG.
Click to expand...
Click to collapse
Sure, next time your in Belgium we can arrange something.
n33l_ray said:
Please sho0w me the way to do JTAG.
Click to expand...
Click to collapse
There lots of videos on you tube or internet that can show you how.
Jackwu696 said:
There lots of videos on you tube or internet that can show you how.
Click to expand...
Click to collapse
Can you provide some effective link?
n33l_ray said:
Can you provide some effective link?
Click to expand...
Click to collapse
OMG... Go to you tube and search "How to use JTAG on my N7000"