Database Develop

[Q] Galaxy Note Bricked After A wrong PIT flash

Hello,
Earlier my GNote went to downloadmod and CWM :good: but when I flash any firmware it stucked at "factoryfs", :crying:
I tried to flash a pit file and I have flashed "N7000_16GB_Q1_20110914--patched--brick-between-1174-and-12985-MB--DATAFS-moved-by-11264-MiB.pit" while the flashing it stucked.:crying:..
I DON'T KNOW WHY...
I unplug the cable from the phone and tried to turn it in to download mod again, It wont turn on..
I plug it to the PC, It wont turn on or recognize :crying::crying::crying:
Please help me with this...... I want my GNote Back..
Thank you....!!!

amjiffy70 said:
it stucked at "factoryfs"
Click to expand...
Click to collapse
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.

ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
Haha +1 gotta love your sarcasm... xD... "Bricked your device successfully" ~
Tapatalking on my n7000

Take a look here and here..

ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
I have searched and read a lot of forums I think the only way to fix this is JTAG method right? and no any other way to fix this... :crying::crying:

andreaonelove said:
Take a look here and here..
Click to expand...
Click to collapse
When I plug my GNote to PC it does not recognize.. and ODIN also does not recognize... :crying::crying:
I think this is the only way...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/

amjiffy70 said:
When I plug my GNote to PC it does not recognize.. and ODIN also does not recognize... :crying::crying:
I think this is the only way...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
Click to expand...
Click to collapse
JTag cannot help you, I'm afraid. There's not been a single report of successfully JTagging Note back to life after a superbrick.
Mobo replacement is the only solution.
Sent from Nexus 7

chasmodo said:
JTag cannot help you, I'm afraid. There's not been a single report of successfully JTagging Note back to life after a superbrick.
Mobo replacement is the only solution.
Sent from Nexus 7
Click to expand...
Click to collapse
I went to a local shop and asked them, they told me that It can be fix by a JATAG, and they told me, has to make a BOOTLOADER and should replace that.
I dont know anything about this, If they can fix it I will tell the result...:good::good::good::good:

amjiffy70 said:
I went to a local shop and asked them, they told me that It can be fix by a JATAG, and they told me, has to make a BOOTLOADER and should replace that.
I dont know anything about this, If they can fix it I will tell the result...:good::good::good::good:
Click to expand...
Click to collapse
Jtag won't fix a burned chip... It's hardware damage and seems like you won't understand that
Tapatalking on my n7000

msedek said:
Jtag won't fix a burned chip... It's hardware damage and seems like you won't understand that
Tapatalking on my n7000
Click to expand...
Click to collapse
hmm so is there anyway to fix this?

amjiffy70 said:
hmm so is there anyway to fix this?
Click to expand...
Click to collapse
There's no fix.. If you have warranty use it if not then pay for a mobo replacement
Tapatalking on my n7000

Samsung has a good after sales service, If your warranty is not over I think you have good chance to get it replaced with a new one.. try contact directly samsung support through their web site...
Obviously you don't have to say that you have bricked your phone trying to flash a custom rom...
Let us know!

turn on
guys now I can enter the downloadmod again. and odin detect my Gnote.. but the problem is I am still stucked at
factoryfs.img
Click to expand...
Click to collapse
..
I rooted the phone via odin and now I can go to the CWM too.. after that I installed the
AbyssNotekernel42RedTouchCustomLogo
Click to expand...
Click to collapse
and restart the phone then I reset everything, factory data/wipe cache/wipe delvik.... and I tried to install costom roms
XXLA4_CheckromRevo_NoteHD_V5, CriskeloRomNOTE.vICS-V11.2-MD5-7FEDC9597F42C0E9CA2AE4673E84798B
Click to expand...
Click to collapse
but after installed a rom and restart the phone it wont go to the system.. it stucked at
Samsung GALAXY Note GT-N7000
Click to expand...
Click to collapse
and keep restarting.. :crying:
is there any solution for this situation?

andreaonelove said:
Samsung has a good after sales service, If your warranty is not over I think you have good chance to get it replaced with a new one.. try contact directly samsung support through their web site...
Obviously you don't have to say that you have bricked your phone trying to flash a custom rom...
Let us know!
Click to expand...
Click to collapse
friend I dont have warranty for my GNote .. thats why I want your help guys...

amjiffy70 said:
guys now I can enter the downloadmod again. and odin detect my Gnote.. but the problem is I am still stucked at ..
I rooted the phone via odin and now I can go to the CWM too.. after that I installed the and restart the phone then I reset everything, factory data/wipe cache/wipe delvik.... and I tried to install costom roms but after installed a rom and restart the phone it wont go to the system.. it stucked at and keep restarting.. :crying:
is there any solution for this situation?
Click to expand...
Click to collapse
Are you sure your note is N7000?
Sent from my GT-I9300 using xda premium

cousiver said:
Are you sure your note is N7000?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yep bro... do you know any solution for this?

have you tried with the right pit file?

nokiamodeln91 said:
have you tried with the right pit file?
Click to expand...
Click to collapse
yep I tried with and wothout
Q1_20110914_16GB.pit
Click to expand...
Click to collapse
still the same problem.. :crying:
for these firmwares;
N7000DDLP8_N7000ODDLP5_SLK
N7000DDLR6_N7000ODDLR2_SLK
N7000XXLA3_N7000OXALA3_OXA
Samsung-Updates.com-GT-N7000_INU_1_20120514221949_hbznmf1h8e

You said you tried to install XXLA4_CheckromRevo_NoteHD_V5.
was this successful using CWM?, if yes then after the installation, did you do a factory wipe?

ThaiDai said:
This means you bricked your device successfully.
Search the forum this time and read the threads with workarounds for repairing it.
Click to expand...
Click to collapse
hey bro now
I UNBRICKED MY GNOTE SUCCESSFULLY..
Click to expand...
Click to collapse

[Q] knocked on the recovery

I have a Samsung device Galaxy SIII Mini (GT-I 8190)
Accidentally installed a version that was not his, and knocked on the recovery, and now my device does not get any updates, not through the OTA and automatic updates, simply the recovery screwed.
I tried to change version, and restore the original version and it did not help ..
By the way, every time a version I do, he gets stuck, and I must do him param then he recovers back. No param is stuck in the front window.
You know how you fix it please?

I dont think that any update was published.
Sent from my GT-I8190 using xda app-developers app

.
ppero196 said:
I dont think that any update was published.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Well, what shall I do?
Can fix this?

Maybe flash an official firmware from the start and do a hard reset (after the flashing).
That should definitely install the official recovery again!

quendil said:
Maybe flash an official firmware from the start and do a hard reset (after the flashing).
That should definitely install the official recovery again!
Click to expand...
Click to collapse
How do I do this?

salah_nahi said:
How do I do this?
Click to expand...
Click to collapse
You can download a new firmware from sammobile.com and then use the following guide for instructions:
http://www.tsar3000.com/Joomla/inde...and-stock-firmware&catid=57:how-to&Itemid=104

I tried what you said .. It did not help .. Still in the same situation
Sent from my GT-I8190 using xda app-developers app

salah_nahi said:
I tried what you said .. It did not help .. Still in the same situation
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Was your flash succesful and did you do a hard reset after the flash?
Can you describe us EXACTLY (by letter) what your device does?

.
quendil said:
Was your flash succesful and did you do a hard reset after the flash?
Can you describe us EXACTLY (by letter) what your device does?
Click to expand...
Click to collapse
I did install the original version, the installation is completed to the end ..
After doing the installation device stuck, I could not do anything to him, not a hard reset, or anything that is stuck and went to recovery.
The device remains stuck until I did a setup to PARAM

Well, the way I understand I need to Install a new ClockworkMod Recovery..
Where can I get this file please?

salah_nahi said:
Well, the way I understand I need to Install a new ClockworkMod Recovery..
Where can I get this file please?
Click to expand...
Click to collapse
There is no cwm recovery for our phone yet.

quendil said:
You can download a new firmware from sammobile.com and then use the following guide for instructions:
http://www.tsar3000.com/Joomla/inde...and-stock-firmware&catid=57:how-to&Itemid=104
Click to expand...
Click to collapse
quendil said:
There is no cwm recovery for our phone yet.
Click to expand...
Click to collapse
How I saw that s iii mini and the sii is the same system and the same processor and the same data to both devices,
what do you say? I can try the cwm recovery of the S II on my device?

salah_nahi said:
How I saw that s iii mini and the sii is the same system and the same processor and the same data to both devices,
what do you say? I can try the cwm recovery of the S II on my device?
Click to expand...
Click to collapse
please dont do it. you risk bricking your phpne.

quendil said:
please dont do it. you risk bricking your phpne.
Click to expand...
Click to collapse
Well then I will not do anything,
I understand that I have to wait until a CWM to my device ..
Right?

salah_nahi said:
Well then I will not do anything,
I understand that I have to wait until a CWM to my device ..
Right?
Click to expand...
Click to collapse
yes mate as we all do.
there is a guide for building cwm in xda university
if i get time i might study a bit for it.

quendil said:
yes mate as we all do.
there is a guide for building cwm in xda university
if i get time i might study a bit for it.
Click to expand...
Click to collapse
So come on, when you have something suitable for my device do not forget me ..
And really I thank you for helping me.
Thanks man :good:

salah_nahi said:
I did install the original version, the installation is completed to the end ..
After doing the installation device stuck, I could not do anything to him, not a hard reset, or anything that is stuck and went to recovery.
The device remains stuck until I did a setup to PARAM
Click to expand...
Click to collapse
sorry my english is not so good
I have exactly the same problem I do not come purely from recopvery menu
already tried everything from nor even with ADB hardreset not one time with the code * # 87976633 #. if I pull on it ne other firmware I've also the problem that the programs I had before the bottles are then on it is still there or twice since
there may be the possibility to erase the phone completely, format as in the PC hard drive???
or what can I do otherwise??
[FONT="<font><font>Arial Black</font></font>"]I needed help penetrate[/FONT]

jony1512 said:
sorry my english is not so good
I have exactly the same problem I do not come purely from recopvery menu
already tried everything from nor even with ADB hardreset not one time with the code * # 87976633 #. if I pull on it ne other firmware I've also the problem that the programs I had before the bottles are then on it is still there or twice since
there may be the possibility to erase the phone completely, format as in the PC hard drive???
or what can I do otherwise??
[FONT="<font><font>Arial Black</font></font>"]I needed help penetrate[/FONT]
Click to expand...
Click to collapse
Probably your problem is like mine, you have the recovery fails, and you can not do anything, that recovery is available now, so have to wait

[Q] Help needed to revive dead S Advance

i was doing a manual update through Odin started the process off and then went to fetch a drink from kitchen, came back to laptop Odin had finished the process and had PASS written in box, but the phone itself is now lifeless will not switch on will not do anything.
can anyone help me?

rumbo76 said:
i was doing a manual update through Odin started the process off and then went to fetch a drink from kitchen, came back to laptop Odin had finished the process and had PASS written in box, but the phone itself is now lifeless will not switch on will not do anything.
can anyone help me?
Click to expand...
Click to collapse
Do you have I9070P??? If so, your phone is bricked. Take it to service.
If not, can you go to download mode?

shut_down said:
Do you have I9070P??? If so, your phone is bricked. Take it to service.
If not, can you go to download mode?
Click to expand...
Click to collapse
yes it is i9070p, if its bricked is there nothing i can do?

Oh, i'm sorry but as shut_down said there is nothing you can do. Just service.
Sent from my GT-I9070 using xda app-developers app

rumbo76 said:
yes it is i9070p, if its bricked is there nothing i can do?
Click to expand...
Click to collapse
Developer CallMeVentus bricked his that way, and he took it to warranty. No way you can fix it by yourself. You should read first.

rumbo76 said:
i was doing a manual update through Odin started the process off and then went to fetch a drink from kitchen, came back to laptop Odin had finished the process and had PASS written in box, but the phone itself is now lifeless will not switch on will not do anything.
can anyone help me?
Click to expand...
Click to collapse
ppls dont post in Dev forum for Q's! we will help you even if you post in the Q&A Subforum(dunno what it appears as in your browser,but i think its pretty clear!) as for bricking,only way is to take it to service.

I'm sorry. I hope you can fix it with the service. Best of luck!

shut_down said:
Developer CallMeVentus bricked his that way, and he took it to warranty. No way you can fix it by yourself. You should read first.
Click to expand...
Click to collapse
Okay , I feel that a sticky is needed to prevent more deaths
"Viper kills.....again!"

Одг: [Q] Help needed to revive dead S Advance
CallMeVentus said:
Okay , I feel that a sticky is needed to prevent more deaths
"Viper kills.....again!"
Click to expand...
Click to collapse
Yes, one with title: Do not flash I9070 roms and firmwares to I9070P. Duble check before do some instalation.
Sent from Galaxy S Advance

R: [Q] Help needed to revive dead S Advance
You can try a tool like One click unbrick
Sent from my GT-I9070 using xda app-developers app

Help! Hard Brick?

Hello all,
I just flashed CloudyFa's cloudstock rom with the patched kernel and it booted up.
No radio.
So I go on forum and Micromod777 posted a baseband which should work on it and I do a full wipe, flash cloudy's rom, the kernel and then the baseband
Rebooted and black screen of death.
Just a vibration to confirm that it is booted up
Am I screwed?

Any possible solutions?

hiddenfive said:
Any possible solutions?
Click to expand...
Click to collapse
Try plugging it into linux and seeing if it'll recognize it? If you don't have adb or downloader mode you're probably screwed...

TheOriginalKyle said:
Try plugging it into linux and seeing if it'll recognize it? If you don't have adb or downloader mode you're probably screwed...
Click to expand...
Click to collapse
Would virtual box work?

hiddenfive said:
Would virtual box work?
Click to expand...
Click to collapse
I don't see why not but if you don't even see the LG logo it's probably hard bricked.

TheOriginalKyle said:
I don't see why not but if you don't even see the LG logo it's probably hard bricked.
Click to expand...
Click to collapse
It is. :crying:
Right now it is a brick. I am getting a replacement soon.
But do you know if there are any JTAG/ JIG methods available?

hiddenfive said:
It is. :crying:
Right now it is a brick. I am getting a replacement soon.
But do you know if there are any JTAG/ JIG methods available?
Click to expand...
Click to collapse
I haven't seen any you could try searching the forums for it, I got hard bricked by freegee a while back so I hope all goes well

These phones usually don't brick too easily. If you can get into download mode then you probably aren't bricked.
Maybe try this:
http://forum.xda-developers.com/showthread.php?t=2471370
In the future don't mess with the baseband if you don't know what your doing.
Edit:
If you can't get download mode. There is still a chance but you must use linux.
This guide is for a D8XX so DO NOT USE ANY OF THE FILES LISTED THERE:
http://forum.xda-developers.com/showthread.php?t=2582142
These should be the files for the VS980 12B, that I quickly just found in the same directory:
http://downloads.codefi.re/autoprime/LG/LG_G2/VS980/Stock_Firmware/12B_Partitions
In theory it should work, but I have not tested it. Use this at your own risk as a last resort!

Here's the post where I saved my vs980 from a brick. Couldn't get to system, recovery, or download. It's likely the same guide Ploxorz just linked.

Help meee !

I need help . I wiped my backup by mistake now i cant start my device. gets stuck on galaxy with the model logo . Anyone help ? Thanks

luizinho123 said:
I need help . I wiped my backup by mistake now i cant start my device. gets stuck on galaxy with the model logo . Anyone help ? Thanks
Click to expand...
Click to collapse
You should research how to odin back to stock from "flash mode". That should fix this for you.

jasons1004 said:
You should research how to odin back to stock from "flash mode". That should fix this for you.
Click to expand...
Click to collapse
And you know if i can do that without using PC ?

luizinho123 said:
And you know if i can do that without using PC ?
Click to expand...
Click to collapse
Nope. You need a pc to fix your problem.
That happened to me once it twice.
Odin stock is only way, to my knowledge, to fix this.
You lucky I'm bored atm........
http://galaxynote5root.com/galaxy-note-5-unroot/how-to-unrootunbrick-galaxy-note-5-2/2/
You might have to flash kernel or something too but these instructions are just for stock rom. I hoped you had OEM unlocked before you bricked.......

jasons1004 said:
Nope. You need a pc to fix your problem.
That happened to me once it twice.
Odin stock is only way, to my knowledge, to fix this.
You lucky I'm bored atm........
http://galaxynote5root.com/galaxy-note-5-unroot/how-to-unrootunbrick-galaxy-note-5-2/2/
You might have to flash kernel or something too but these instructions are just for stock rom. I hoped you had OEM unlocked before you bricked.......
Click to expand...
Click to collapse
OEM ?

luizinho123 said:
oem ?
Click to expand...
Click to collapse
????

jasons1004 said:
????[/QUOTE
Nevermind . OFC it is
Click to expand...
Click to collapse