Hi I flashed my n7000 to the leaked JB 4.1.2 XXLSA rom. doesnt seem stable. Its laggy, buggy and frightening. Please tell me if I keep it till the official one comes out, will I be notified? and If I want to revert to Official ICS, Whats the procedure? I am new to this so Detailed Solutions will be appreciated
Notification on the phone? May be no. But on xda and other sites, yes.
To get back to stock ics you will need to install the rom using pc or mobile odin.
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
Instructions inhere
http://forum.xda-developers.com/showthread.php?t=1424997
Related
Which is best and safe kernel to flash the JB rom's ..HydraCorev6 or Philz kernel ???
both are safe. best or not depends upon personal preference.
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
if you like tweaking your phone for performance, the hydra else if you like me, who likes t stock feel then philz
HydraCore
Is HydraCore compatible with all the JB ROMs that have come up. i am on JB Rocket ROM v1 which has a kernel already i guess. how does flashing hydracore gonna be any different from what i already have. p.s: i had flashed Philz before flashing JB RR V1.
hydracore won't work with that but the v6 beta works with a few out there but not the stock jb
I am on ICS 4.0.4 Stock ROM; I flashed 3.0.36_Hydracore_v5.34 (screenshot attached)
and now my Gnote is showing only 799 MB ram available in RAM Status.
How can I get back my total RAM ?
Also I want to know Can I flash stable custom ROMs like CyanogenMod 9.1.0
or nightly jellyBin ROM safely without loosing my apps and settings?
Please Help
Thanks in Advance
different kernels show different ram values, some is used by the system so you can never see full
stock shows 808
notecore shows more than that... its normal
---------- Post added at 08:08 PM ---------- Previous post was at 08:08 PM ----------
no.. you need to make a full backup of your apps and data before installing custom roms
nokiamodeln91 said:
different kernels show different ram values, some is used by the system so you can never see full
stock shows 808
notecore shows more than that... its normal
Click to expand...
Click to collapse
Hmmm..I never observed that RAM changes with rom/kernel..i can see 873MB of RAM on stock 4.0.4 with hydracore v7 (oc).. :good:
yes bcuz the change log of v7 says more ram for all roms.. 873 mb
Thanks for the info
nokiamodeln91 said:
yes bcuz the change log of v7 says more ram for all roms.. 873 mb
Click to expand...
Click to collapse
So can I try flashing Hydracore V7
yes you will get 873 mb if ram. but before you flash it, find out how to get off it
Is there any way to get back to stock kernel avoiding factory reset?
desaipa said:
Is there any way to get back to stock kernel avoiding factory reset?
Click to expand...
Click to collapse
Yes simply flash the same rom you were on right now and you will get the stock kernel and its not required to do a factory reset
[email protected]$3K#@R said:
Yes simply flash the same rom you were on right now and you will get the stock kernel and its not required to do a factory reset
Click to expand...
Click to collapse
I am on stock ROM ICS 4.0.4 updated through kies.....
In that case how can I get original stock ICS 4.0.4 ROM ( please provide link)
thanks in advance....
desaipa said:
I am on stock ROM ICS 4.0.4 updated through kies.....
In that case how can I get original stock ICS 4.0.4 ROM ( please provide link)
thanks in advance....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1424997
Here you can find all stock roms
Go to settings<about phone and check the rom version and download the same rom from the above link
---------- Post added at 02:15 PM ---------- Previous post was at 02:12 PM ----------
Download DDLR9 rom
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
And its not really safe to be on a stock kernel
[email protected]$3K#@R said:
http://forum.xda-developers.com/showthread.php?t=1424997
Here you can find all stock roms
Go to settings<about phone and check the rom version and download the same rom from the above link
---------- Post added at 02:15 PM ---------- Previous post was at 02:12 PM ----------
Download DDLR9 rom
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
And its not really safe to be on a stock kernel
Click to expand...
Click to collapse
I thought to go back default stock kernel and then flash hydracore v7 to get same RAM.....
one more question can I flash CM9 stable rom without loosing my data or do I need to follow wipe data step while using CMW recovery to flash any ROM ?
desaipa said:
I thought to go back default stock kernel and then flash hydracore v7 to get same RAM.....
one more question can I flash CM9 stable rom without loosing my data or do I need to follow wipe data step while using CMW recovery to flash any ROM ?
Click to expand...
Click to collapse
I dont understand what u mean??
You are on hydracore v5.4,and want to flash hydracore v7,then why were you thinking about stock kernel
And to go to cm9,you need to wipe the data
use titanium backup. you will never loose your apps and data
[email protected]$3K#@R said:
I dont understand what u mean??
You are on hydracore v5.4,and want to flash hydracore v7,then why were you thinking about stock kernel
And to go to cm9,you need to wipe the data
Click to expand...
Click to collapse
Thanks that helped a lot..... clicked thanks..... your thanks meter is now 100 ......
flashed hydracore v7 and got the remaining RAM now its 874....
Still foggy about Kernels and ROMs.
I recently installed 3.0.36_HydraCore_v5.34 kernel on my GT-N700 which was already running ICS 4.0.4 Baseband version N7000XXLS1 and it seems very stable.
However, I wanted to try the Speedmod JB ROM from Cursed4Eva and saw that it required installing a supplied kernel first. I assumed this is because the kernel and ROM have been developed together for compatibility. (Not sure if I assume correctly or if I'm using the correct terminology).
It all worked fine until I tried to re-install the HydraCore kernel after which the phone wouldn't boot. (I recovered easily using a Nandroid backup with ROM Manager).
My question is, is it always the best practice to install the recommended kernel (if any) when flashing a new ROM and not to try re-installing say, the Hydracore afterwards? The HydraCore claims to be compatible with any ROM but either it isn't compatible with the JB ROM or I'd doing something wrong (more likely).
Any advice would be most appreciated.
Trevor
I don't know what is a speedmod jb rom.
but if it's based on the latest samsung stock touchwiz jellybean rom, the hydracore is not compatible with it. current safe kernel is only philz xxls2/xxls7. If the phone is not booting the boot into recovery and flash the rom again
---------- Post added at 06:54 PM ---------- Previous post was at 06:53 PM ----------
hydracore is compatible with most of the roms except the Samsung JB touchwiz as the kernel sources are not released as of yet. Once it does, dev will make it compatible for it too
Thank you. That makes sense. I still have a lot to learn.
Trevor
PS I would have hit thnks but can't see the button on my screen.
nokiamodeln91 said:
I don't know what is a speedmod jb rom.
but if it's based on the latest samsung stock touchwiz jellybean rom, the hydracore is not compatible with it. current safe kernel is only philz xxls2/xxls7. If the phone is not booting the boot into recovery and flash the rom again
---------- Post added at 06:54 PM ---------- Previous post was at 06:53 PM ----------
hydracore is compatible with most of the roms except the Samsung JB touchwiz as the kernel sources are not released as of yet. Once it does, dev will make it compatible for it too
Click to expand...
Click to collapse
hey guys
im new here
yesterday i downloaded the app ROM MANAGER, because i would like to go to CWM.
Then i was there and later i cant boot the phone normally.
i have JB XXLQB and cocore kernel. but before i havent any problems.
Today i tried to flash the official xxlqp again via odin, but i cant because in odin there was not writing ADDED
then tried to flash a custom rom (pure vanilla v3), but again just in CWM :crying:.
I need help, please
Edit: is that a brick ?
And sorry for my bad english im from germany
You actually downloaded ROM Manager? Oh god.
Did you try flashing stock from CWM... Here's a stock LQB firmware flashable zip: http://hotfile.com/dl/198627441/57a...om-GT-I9070-TSR-I9070XXLQB-1361861136.zip.htm
guyshelpmeplease said:
hey guys
im new here
yesterday i downloaded the app ROM MANAGER, because i would like to go to CWM.
Then i was there and later i cant boot the phone normally.
i have JB XXLQB and cocore kernel. but before i havent any problems.
Today i tried to flash the official xxlqp again via odin, but i cant because in odin there was not writing ADDED
then tried to flash a custom rom (pure vanilla v3), but again just in CWM :crying:.
I need help, please
Edit: is that a brick ?
And sorry for my bad english im from germany
Click to expand...
Click to collapse
Please search the concerned thread before creating new threads. The answer your looking for is already there in the CoCore Kernel thread:
http://forum.xda-developers.com/showpost.php?p=37782738&postcount=5
Download the file and put it in your external SD card and flash it in recovery
---------- Post added at 03:10 PM ---------- Previous post was at 03:06 PM ----------
panda00 said:
You actually downloaded ROM Manager? Oh god.
Did you try flashing stock from CWM... Here's a stock LQB firmware flashable zip: http://hotfile.com/dl/198627441/57a...om-GT-I9070-TSR-I9070XXLQB-1361861136.zip.htm
Click to expand...
Click to collapse
LOL we posted at the same time :silly:. I think that he downloaded ROM Manager to boot into CWM and not to install it because he says that he uses CoCore kernel. So just flashing the reboot-system-cwm.zip file should be enough.
Abhinandh Ajay said:
Please search the concerned thread before creating new threads. The answer your looking for is already there in the CoCore Kernel thread:
http://forum.xda-developers.com/showpost.php?p=37782738&postcount=5
Download the file and put it in your external SD card and flash it in recovery
---------- Post added at 03:10 PM ---------- Previous post was at 03:06 PM ----------
LOL we posted at the same time :silly:. I think that he downloaded ROM Manager to boot into CWM and not to install it because he says that he uses CoCore kernel. So just flashing the reboot-system-cwm.zip file should be enough.
Click to expand...
Click to collapse
Thanks its working!
That happened to me too but for other reazons. I installed this https://play.google.com/store/apps/details?id=com.scartech.holoreboot app from market, then I went to recovery using the app and got stucked in CWM. Strange thing it's I'm still using a previous version of cocore kernel (4.4) but I fixed that using the same .zip
Sent from my GT-I9070 using xda app-developers app
I took the card out to put the file reboot.system-cwm.zip from cocafe, but now my phone no longer recognize thge external SD.
How to proceed?
---------- Post added at 12:01 PM ---------- Previous post was at 11:39 AM ----------
I solved it with adb shell thanks Shut_down thread.
I'm currently running JetMOD on my S Advance but wanted to get one of the Jelly Bean roms ( Mainly JellyMOD ), i've tried flashing it but I get stuck on the bootscreen.
Since it says Jelly Bean Only does that mean I have to flash the Un/Official Jelly Bean Firmware and then flash the Rom? If so it would be great if someone could link me to the things I need!
TotallyNotBarto said:
I'm currently running JetMOD on my S Advance but wanted to get one of the Jelly Bean roms ( Mainly JellyMOD ), i've tried flashing it but I get stuck on the bootscreen.
Since it says Jelly Bean Only does that mean I have to flash the Un/Official Jelly Bean Firmware and then flash the Rom? If so it would be great if someone could link me to the things I need!
Click to expand...
Click to collapse
Lol. Yes. You have to first flash jelly bean for that.
And you can find everything u need under development section
---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------
http://forum.xda-developers.com/showthread.php?t=1945806
szzlgupta said:
Lol. Yes. You have to first flash jelly bean for that.
And you can find everything u need under development section
---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------
http://forum.xda-developers.com/showthread.php?t=1945806
Click to expand...
Click to collapse
Thanks! , got my Jelly Bean and also got it rooted but.. since I cant install TWRP ( GooManager tells me theres no recoveries for my device ) I cant install any custom roms D:
Any help with this ?
TotallyNotBarto said:
Thanks! , got my Jelly Bean and also got it rooted but.. since I cant install TWRP ( GooManager tells me theres no recoveries for my device ) I cant install any custom roms D:
Any help with this ?
Click to expand...
Click to collapse
I don't know what goomanager is.
But why can't u install twrp?
And btw u can use temp cwm by shaan
szzlgupta said:
I don't know what goomanager is.
But why can't u install twrp?
And btw u can use temp cwm by shaan
Click to expand...
Click to collapse
GooManager is the app thats on the official toppic for TWRP.
I'll try CWM now
EDIT: Worked, thanks for the help!