Why there is no rom based on latest Samsung JellyBean UBLS5 source ?
I mean that it should be better than any leaked firmware.
SVA rom?
Recognized Distributor™
noteandfound said:
SVA rom?
Recognized Distributor™
Click to expand...
Click to collapse
SVA rom is made from leaks, anyway it works fine (I use it).
But the problem with leaked firmwares is that the Note wont reboot if you accidentaly remove the battery while the phone is on.
Maybe building a rom from official sources will solve that bug.
There's no source because "leaks" are not official Firmware.
Tapatalking on my n7000
lionelia said:
SVA rom is made from leaks, anyway it works fine (I use it).
But the problem with leaked firmwares is that the Note wont reboot if you accidentaly remove the battery while the phone is on.
Maybe building a rom from official sources will solve that bug.
Click to expand...
Click to collapse
OT: how do you "accidentally" remove the battery while the phone is on?
msedek said:
There's no source because "leaks" are not official Firmware.
Tapatalking on my n7000
Click to expand...
Click to collapse
Have a look here : http://opensource.samsung.com/
drbobb said:
OT: how do you "accidentally" remove the battery while the phone is on?
Click to expand...
Click to collapse
Stupid question at all
drbobb said:
OT: how do you "accidentally" remove the battery while the phone is on?
Click to expand...
Click to collapse
falling phone..
improper shutting down...
freezing phone and removing battery...
those would trigger the bootloop bug...
MY WORKAROUND to solve it:
reboot to recovery>>>>>>
go to advance>>>>>>>>>
click the reboot to recovery>>>>>
after rebooting to recovery(again) click reboot sytem now...
its easier than creating a back up and restoring it... :thumbup::beer:
Recognized Distributor™
noteandfound said:
falling phone..
improper shutting down...
freezing phone and removing battery...
those would trigger the bootloop bug...
MY WORKAROUND to solve it:
reboot to recovery>>>>>>
go to advance>>>>>>>>>
click the reboot to recovery>>>>>
after rebooting to recovery(again) click reboot sytem now...
its easier than creating a back up and restoring it... :thumbup::beer:
Recognized Distributor™
Click to expand...
Click to collapse
Thank's for the trick, it will help waiting for better release. Much faster than restoring from a backup.:good:
noteandfound said:
falling phone..
improper shutting down...
freezing phone and removing battery...
those would trigger the bootloop bug...
MY WORKAROUND to solve it:
reboot to recovery>>>>>>
go to advance>>>>>>>>>
click the reboot to recovery>>>>>
after rebooting to recovery(again) click reboot sytem now...
its easier than creating a back up and restoring it... :thumbup::beer:
Recognized Distributor™
Click to expand...
Click to collapse
awesome lols
Related
My phone Stucks at lockscreen after i changed my battery ...
Why this problem occurs?
any solutions for this ?
Thanks in advance for replies
stuck at lockscreen? you mean your touchscreen doesn't work or not response?
recovery,full wipe,reflash and it all done.
take off the battery if you can't turn it off then reflash your ROM (do a full wipe first)... OR you can switch to another ROM..
damir87 said:
stuck at lockscreen? you mean your touchscreen doesn't work or not response?
Click to expand...
Click to collapse
yes the touch is not responding sometimes at lockscreen.
in that case i take out my battery and reboot the phone
Lukenda said:
recovery,full wipe,reflash and it all done.
Click to expand...
Click to collapse
i already done these things there is no change
mikel_0004 said:
take off the battery if you can't turn it off then reflash your ROM (do a full wipe first)... OR you can switch to another ROM..
Click to expand...
Click to collapse
k ill try other rom
jelamathi said:
k ill try other rom
Click to expand...
Click to collapse
there is no change after changed the rom and kernel also it still happens
Try Took you Sim card out, Turn you Phone, see how it will be.
Or, Try change you Lockscreen Setting.
Shimizux said:
Try Took you Sim card out, Turn you Phone, see how it will be.
Or, Try change you Lockscreen Setting.
Click to expand...
Click to collapse
No change..
Even i relocked bootloader and updated through seus
at the first start phone working normally once it gets locked i cant unlock it
Have you over clocked or under volt your phone? check this.
same problem with me.. but im lucky because my touch screen only work on stock rom which mean 2.1 .. if i use any custom kernel which enable multi touch, 100% sure my touch screen will not work.. this problem happen today 3 weeks of using naA ics kernel and minicm9 rom with no problems.. maybe the hardware is faulty?
dipusen said:
Have you over clocked or under volt your phone? check this.
Click to expand...
Click to collapse
Yes i overclocked 0nly to 691Mhz
sharmix0x0 said:
same problem with me.. but im lucky because my touch screen only work on stock rom which mean 2.1 .. if i use any custom kernel which enable multi touch, 100% sure my touch screen will not work.. this problem happen today 3 weeks of using naA ics kernel and minicm9 rom with no problems.. maybe the hardware is faulty?
Click to expand...
Click to collapse
First it occured first when i started using minicm9 rom with naa ics
hiii,,,,,
i am on rooted Alliance JB ROM based on TW....... here is the link http://forum.xda-developers.com/showthread.php?t=1974612
and my problem is that s-pen is not working at all......
any suggesitions pleaseee....
Did it work prior to flashing alliance?
Have you tried to re flash the rom or try another rom? That's a strange issue you have, all I can think of is maybe it didn't flash correctly, the pen requires certain files to work, if the didn't install correctly or are corrupted then that could be the issue.
Are you experiencing any other issues? Like random FC's?
Sent from my GT-N7000 using xda premium
azzledazzle said:
Did it work prior to flashing alliance?
Have you tried to re flash the rom or try another rom? That's a strange issue you have, all I can think of is maybe it didn't flash correctly, the pen requires certain files to work, if the didn't install correctly or are corrupted then that could be the issue.
Are you experiencing any other issues? Like random FC's?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
no any other issue at all........
no problems while flashing...... everything else is working perfect....
and i didn't tried any other rom based upon TW.
actully i am not a fond of flashing roms randomly ...... i was very satisfied with the new Asylum_CM10.1.... but i want that multi window feature which is very good...
..... so could u please guide me to the best rom based on TW having multi window option.......
try to reflash the rom again with formating - system, data and cache this time from recovery mode
nokiamodeln91 said:
try to reflash the rom again with formating - system, data and cache this time from recovery mode
Click to expand...
Click to collapse
ok.... i will give it a try.....
nokiamodeln91 said:
try to reflash the rom again with formating - system, data and cache this time from recovery mode
Click to expand...
Click to collapse
done.... but still no luck........
is it possible that the s-pen is damaged... but no another note to try it.
nav235 said:
done.... but still no luck........
is it possible that the s-pen is damaged... but no another note to try it.
Click to expand...
Click to collapse
very possible indeed, But it only stopped working after flashing alliance ? but that could be coinsidence
EDIT: is there a phone store any where near you, you could take your pen and try it on another Note.
.. go to a stcok rom and test again
nokiamodeln91 said:
.. go to a stcok rom and test again
Click to expand...
Click to collapse
azzledazzle said:
very possible indeed, But it only stopped working after flashing alliance ? but that could be coinsidence
EDIT: is there a phone store any where near you, you could take your pen and try it on another Note.
Click to expand...
Click to collapse
yes i think it is the s-pen having problem... as it is also not working on stock rom...
now will replace it with a new one....
anyways thanxx for ur help...
Just wondering if a dev or modder can make a power menu to include the reboot to recovery option for JellyBean please. Would simplify things a lot for everyone I think
bobfrantic said:
Just wondering if a dev or modder can make a power menu to include the reboot to recovery option for JellyBean please. Would simplify things a lot for everyone I think
Click to expand...
Click to collapse
I think every custom JB kernel now have non working J4FS, and that command is not working. It was problem with GB before, if you remember. :angel:
shut_down said:
I think every custom JB kernel now have non working J4FS, and that command is not working. It was problem with GB before, if you remember. :angel:
Click to expand...
Click to collapse
Yea I remember but also In CoCore v3.9+,the J4FS bug has been fixed, so what about in JB?
Одг: [REQ] Reboot to Recovery mod.
bobfrantic said:
Yea I remember but also In CoCore v3.9+,the J4FS bug has been fixed, so what about in JB?
Click to expand...
Click to collapse
Wait and see. Untill now it is not fixed, as far as I know.
Sent from Galaxy S Advance
shut_down said:
Wait and see. Untill now it is not fixed, as far as I know.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
getting out the patience pills LOL
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
rupesh1718 said:
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
Click to expand...
Click to collapse
Gio ROM is based on CM7 or stock ?
F4uzan said:
Gio ROM is based on CM7 or stock ?
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
rupesh1718 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
Click to expand...
Click to collapse
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Bugs:
- RIL FIXED
- no data
- wifi
- bluetooth
- camera/camrecorder
- sd card not detected FIXED
- htc bootanimation stays too long(only at booting, not with phone unlock)
- sound FIXED
- sensors
-backlights
- more I haven't found or not able to test (yet)
Click to expand...
Click to collapse
Why do you want to port an alpha ROM?
chemicalrage said:
Why do you want to port an alpha ROM?
Click to expand...
Click to collapse
Any other suggestion do u have
F4uzan said:
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Click to expand...
Click to collapse
What base is to be used
Please Help me
Updater-script problem...
Status 6 is basically trying to read a file that's not encoded in UNIX. Thanks ChevyNo1 for pointing that out!
Click to expand...
Click to collapse
<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
rupesh1718 said:
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
Click to expand...
Click to collapse
Oh...right...what kernel did u used??
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
raducu7890 said:
Oh...right...what kernel did u used??
Click to expand...
Click to collapse
Cm 7.2 as a base should i change this
rupesh1718 said:
Cm 7.2 as a base should i change this
Click to expand...
Click to collapse
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
F4uzan said:
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
Click to expand...
Click to collapse
raducu7890 said:
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
Click to expand...
Click to collapse
Both will help me its hard but not impossible
rupesh1718 said:
Both will help me its hard but not impossible
Click to expand...
Click to collapse
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
F4uzan said:
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
Click to expand...
Click to collapse
Hope We keep Helping each other
rupesh1718 said:
Hope We keep Helping each other
Click to expand...
Click to collapse
Oh... thanks !
I still don't know what happened in touchscreen. Logged the phone, but doesn't find anything related touchscreen.
Hi
I tried to flash my phone with slim rom 4.6
But in the middle the phone went dead and after that it wouldnt come up .
I have tried various options of putting the phone on charge or changing battery .. but it wouldnt come up .
Could some one help me on getting the phone up .
Can you start recovery or download mode with the 3-button-combos?
No it doesnt work i have tried the combos
so u cant get in recovery mode too..
.umm did you take care of the emmc bug..
were you on a safe kernel?
Hit thanks if you may please..! =) ×D
begimaad said:
so u cant get in recovery mode too..
.umm did you take care of the emmc bug..
were you on a safe kernel?
Hit thanks if you may please..! =) ×D
Click to expand...
Click to collapse
No ...
Am not aware of that .. i was on 4.0.0.4 version os
VinodKadiyala said:
No ...
Am not aware of that .. i was on 4.0.0.4 version os
Click to expand...
Click to collapse
Sorry to say but you've bricked your Galaxy Note!!! Good BYE
VinodKadiyala said:
No ...
Am not aware of that .. i was on 4.0.0.4 version os
Click to expand...
Click to collapse
Yeah its bricked.
Same happened for me..even on a "safe" Kernel.
Going from slim beta 6 to 7..
Now no more note... and samsung wants to charge me 80% of new price to replace mainboard...hmmmm