Hello, i have a droid 3 verizon cdma_solana, and i was trying to flash cyanogen mod, but i made a mistake and i didn't had any back up, so basically i'm stuck on a bootloop, i already tried flashing a lot of times with the stocl files i downloaded from the internet but it didn't seemed to work i need a help here, can anyone help me with that? I also tried other methods across the internet an none of them worked, so if anyone have a back up file and send it to me i'd be very thankfull, i need to get out of this brick to send it to motorola cause it had some conection issues, also the home and search button would'nt work so i was hopping they could do something but witha bootloop and root traces i can't do that! Also i do not owe any other phones so im basically going crazy, any help is needed thank you.
which cyanogen mod, cm7, cm9, cm10, cm10.1?
did you flash Gaaps? which gaaps?
are you using d3 bootstrap or safestrap 2 or 3?
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
boot to AP Fastboot Flash Mode
with phone off, hold volume down & power, to boot
0A.64 you can only use .906 1-click-sbf.exe + tools [10-8-2012]
0A.53 you can use 2.3.4/5.6.890.xml or 5.5.959.xml and rsd lite
if it says battery low, Can not Program you need a charged battery, before flashing
---------- Post added at 04:24 PM ---------- Previous post was at 04:20 PM ----------
flash in AP Fastboot Flash Mode
How to use RSD Lite
How to Video's Root, safe strap, kexec, and much more
sd_shadow said:
which cyanogen mod, cm7, cm9, cm10, cm10.1?
did you flash Gaaps? which gaaps?
are you using d3 bootstrap or safestrap 2 or 3?
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
boot to AP Fastboot Flash Mode
with phone off, hold volume down & power, to boot
0A.64 you can only use .906 1-click-sbf.exe + tools [10-8-2012]
0A.53 you can use 2.3.4/5.6.890.xml or 5.5.959.xml and rsd lite
if it says battery low, Can not Program you need a charged battery, before flashing
---------- Post added at 04:24 PM ---------- Previous post was at 04:20 PM ----------
flash in AP Fastboot Flash Mode
How to use RSD Lite
How to Video's Root, safe strap, kexec, and much more
Click to expand...
Click to collapse
it says 0A.53, but since i am really newbie, i am not using bootstrap, nor safestrap, i don't actually now exactly what it is, can i use it even after i went to bootloop without using it? or im stuck forever?
you have to use safestrap to flash roms
try wiping data in
Android system recovery <3a>
with device off
hold X & power, when you see triangle, !, & Andy, press both volume buttons
if that does not work just
unbrick with 2.3.4/5.6.890.xml and rsd lite
links in my list to files and how to videos
sd_shadow's [Collection] of Links: FAQs, Guides, Rooting, SBFs, ROMs... - Google Docs
don't worry moto devices are almost unbrickable
Related
I have 2.2.2 and a friend gave me this phone and not rooted. The charging port is loose i tried to RSD lite and did pass and update.zip but after installing and rebooting i have the triangle. Is that keeping me from being able to root. I have z4root installed too but it sticks at applying after clicking permanent root? What can i do that i can download as far as a recovery apk from wifi on my phone? Is this possible. Please need help
cell2011 said:
I have 2.2.2 and a friend gave me this phone and not rooted. The charging port is loose i tried to RSD lite and did pass and update.zip but after installing and rebooting i have the triangle. Is that keeping me from being able to root. I have z4root installed too but it sticks at applying after clicking permanent root? What can i do that i can download as far as a recovery apk from wifi on my phone? Is this possible. Please need help
Click to expand...
Click to collapse
Once you see the triangle, try to press and hold camera abd volume up to enter recovery.
Sent from my Milestone using xda premium
Ok will do is that why it keeps saying acquiring root shell on z4 and then goes back to my astro file mgr?
---------- Post added at 07:30 PM ---------- Previous post was at 07:13 PM ----------
I tried that held down power and x and got into triangle and camera button up nothing? If i lost recovery how do i get it back when my charge port is loose inside. Can i do recovery thru the phone online? Is there an apk for recovery? I cant use the USB?
Hi guys, i have a very big problem. I think i may have bricked my smartphone.
I've installed the Cyanogenmod 10 by ivendor from here:
http://forum.xda-developers.com/showthread.php?t=2000828
I already searched the whole net but i never found the exact same "symtoms", here they are:
If i start the Handy it stops at the Samsung Galaxy s plus/Cyanogenmod Screen, but after a few Minutes the screen get's dark and nothing else happens.
Also if i push the menu or return button the light get's on and doesn't off anymore.
It's impossible to get into recovery mode. If i try the screen get's black and again after pushing the menu button it lights on.
I also already tried to flash it again to a stock rom, because the download mode still works.
But after the flashing it won't reboot and if i reset, the bootscreen hasn't changed a bit the cyanogenmod logo is still there.
So i believe, that the flashing didn't work.
Another thing is, that i installed several clockworkmods to get my smarthphone back.
If you have a solution please help me, going to school without music is very bad :crying:
I forgot to mention, that if i load the phone while it's off. The normal shown batterie only shows an stuck loading circle.
Re: [Q] [I9001] Suddenly some mysterious problem's
Bad luck.
Sent from my GT-I9001 using xda premium
THis could help
Flash BroodROM RC5 with odin http://forum.xda-developers.com/showthread.php?t=1396837
That should get your phone working again
Make sure to stick with the instructions.
Next time when flashing a new rom make sure to use the correct recovery and that you have downloaded the new ROM fully
---------- Post added at 02:08 PM ---------- Previous post was at 02:05 PM ----------
Further more - I would flash the alpha 7 version of ivendors rom which seems to be more stable.
siimsander said:
THis could help
Flash BroodROM RC5 with odin http://forum.xda-developers.com/showthread.php?t=1396837
That should get your phone working again
Make sure to stick with the instructions.
Next time when flashing a new rom make sure to use the correct recovery and that you have downloaded the new ROM fully
---------- Post added at 02:08 PM ---------- Previous post was at 02:05 PM ----------
Further more - I would flash the alpha 7 version of ivendors rom which seems to be more stable.
Click to expand...
Click to collapse
I tried the BroodRom but there is this error on the download screen that says: MCC Boot: MBR read failed
So, i just tried factory flash by "recovery --wipe_data" with adb but it just says: "/sbin/postrecoveryboot.sh not found"
Hey guys, i really need some help here, i would really like to just hard reset my phone back to stock, and then i can start from scratch on rooting and what not. My problem is , the phone just wont reset ahha.
like i go into TWRP, and using this post " http://www.droidforums.net/forum/droid-bionic-hacks/234845-factory-bionic-stock-rom-ics-4-0-4-a.html " try and restore my device. Ive so far encountered probably every problem possible...following that post i DL the file and go to past it onto the device storage but i couldn't find the 3. Copy or Move Folder to your Backups....(Ex). Sdcard-Ext/TWRP/Backup.... so i just paste it into the TWRP file directory.from there i go to boot the device, it automatically boots in to adb usb mode stating that ( flash failed) i then have to hold the volume buttons and power to bring it back to the main recovery menu to boot normally!? thats only one problem, next i have Safestrap installed, it shows the start up screen i can continue or boot into recovery. Now in recovery following the instruction in the link provided i go and i 5. Select Stock ROM slot (Activate) and go select 6. Select Restore but theres noting in it, so i just go to install and find my file that i put there. i then do step 7. Select Factory Bionic Folder and 8. Flash it ( Swipe ). TWRP says it was complete but it only shows it going into the flashing process of installing update... so i reboot the phone and same thing, i get automatically pushed to the ABD USB screen saying flash failed. ... last problem , i go to boot past and theres no OS installed ... just a black screen ... im totally lost i dont know what to do hahah , any help here people??
anyone have any ideas on how to just restore this baby straight to stock ICS? thanks
P.S sorry for the bad quality photos, that what u get for taking pics with a razr haha
Dose anyone have any ideas at all, please??
I'd suggest hooking up your Bionic to a computer and FXZ through RSDlite.
Else if phone is bricked use fastboot and use the FXZ version of the stock image.
If you need the official FXZ for 246 ICS, one place to get it from is here:
http://sbf.droid-developers.org/cdma_targa/list.php
Sent from my DROID BIONIC using Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 01:13 PM ----------
Need further help?
Google this: fxz fastboot bionic
There should be a YouTube video called 'unbrick factory reset droid bionic with fast boot and fxz', near the top of the search results. Watch it
Sent from my DROID BIONIC using Tapatalk 2
collije said:
I'd suggest hooking up your Bionic to a computer and FXZ through RSDlite.
Else if phone is bricked use fastboot and use the FXZ version of the stock image.
If you need the official FXZ for 246 ICS, one place to get it from is here:
http://sbf.droid-developers.org/cdma_targa/list.php
Sent from my DROID BIONIC using Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 01:13 PM ----------
Need further help?
Google this: fxz fastboot bionic
There should be a YouTube video called 'unbrick factory reset droid bionic with fast boot and fxz', near the top of the search results. Watch it
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
errr, bump? Do you still need help?
Hello Bueller?
So I wanted to upgrade from ANJ7 to ANK4.
I downloaded ODIN from here: http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
I downloaded stock ANK4 from SamMobile.
I backed up my phone and put the phone in download mode. I flashed the stock ROM and ODIN said success.
Now it's been rebooting itself for the last 20 minutes. I have to go to my relatives for Christmas celebrations soon and it was probably stupid to it before hand, but whatever.
So how do I fix this?
Thanks!
Pull the battery.
Then put it back in.
You'll be straight
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
If that doesn't work.
Boot into stock recovery.
With the phone off.
Press volume up, power, and home.
And clear your cache.
Karakoram2 said:
Pull the battery.
Then put it back in.
You'll be straight
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
If that doesn't work.
Boot into stock recovery.
With the phone off.
Press volume up, power, and home.
And clear your cache.
Click to expand...
Click to collapse
Lol, didn't see your response.
I am ODIN'ing stock again. If it does the same thing, I will try your suggestion.
When you Odin stock you bootloop.
Known issue
---------- Post added at 11:18 PM ---------- Previous post was at 11:14 PM ----------
This is from a note 3 forum, but steps 8-11 still apply.
I've got to get to my family's house, too. But, let's get you unlooped.
http://www.androidrootz.com/2013/10/how-to-unrootunbrick-galaxy-note-3.html?m=1
Karakoram2 said:
Pull the battery.
Then put it back in.
You'll be straight
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
If that doesn't work.
Boot into stock recovery.
With the phone off.
Press volume up, power, and home.
And clear your cache.
Click to expand...
Click to collapse
The battery pull didn't do it.
However wiping data/cache (i.e. factory reset) worked like a charm.
Thanks!
Have a great day
You as well.
Merry Christmas!
I have an LG Optimus L90 D415 currently on [ROM][LP][LG-L90][UBERTC] Optimized CM. Was experiencing random reboots, so I thought I'd try updating the bootstack from 10C to 20B. The flash said successful. I cleared dalvik and cache, then hit reboot system. The screen went blank. I'm now stuck in what appears to be mass storage mode? I can't access recovery (TWRP 2.8.6.0) or download mode. I tried all vol down + power for recovery, no logo. Tried vol up and plugging into usb for download mode and the only access I get from my computer is these 2 files (see attached). Any help appreciated...
Hi, send me your teamviewer to private message.
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
bobl61 said:
I have an LG Optimus L90 D415 currently on [ROM][LP][LG-L90][UBERTC] Optimized CM. Was experiencing random reboots, so I thought I'd try updating the bootstack from 10C to 20B. The flash said successful. I cleared dalvik and cache, then hit reboot system. The screen went blank. I'm now stuck in what appears to be mass storage mode? I can't access recovery (TWRP 2.8.6.0) or download mode. I tried all vol down + power for recovery, no logo. Tried vol up and plugging into usb for download mode and the only access I get from my computer is these 2 files (see attached). Any help appreciated...
Click to expand...
Click to collapse
...
TreQUS said:
Hi, send me your teamviewer to private message.
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
...
Click to expand...
Click to collapse
Private message sent.
TreQUS said:
Hi, send me your teamviewer to private message.
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
...
Click to expand...
Click to collapse
Hello can you please help me??? I am going trough the same problem :crying::crying::crying: i am desesperate!!
I have the same problem, can someone post the solution?
blokas said:
I have the same problem, can someone post the solution?
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Dont do the part when you have to dessambly your phone
Enviado desde mi LG-D410 usando XDA Forums