hellou,i want to put jelly bean on my galaxy note,so can somebody help me,plsss.
now i have 4.0.3. software.
if is possiblle this one [ROM][4.1.2 JB]Ultimate N7000 XXLSC JellyBean 4.1.2 v5.1,
plss video or something beacuse i am an begginer.
Thanksssss
which JB you want? JB TW leaks or custom.
TW JB can be either installed using PC odin
for custom roms you will need to root and get CWM and then install by following the ROM thread instructions
i want a custom,but i need all process,from begin to finish,backup and all stuff...
As you are on a dangerous kernel (wiping data may follow with a hard brick) do not wipe your data untill you are on JB
1. Go into settings => about phone => build number
2. Search for a kernel that corresponds to your build number, ex you will have N7000XXLSC in your build number so you are looking for XXLSC (NOTE: Read the kernel thread and understand it). Download this file onto your external memory.
3. Turn your phone off, then turn it on by holding volume up, home button and power on button all at the same time.
4 Select install zip from sd card, select it and let it do it's thing.
5 Your phone will reboot if all goes well and you will be on a safe kernel and you will have root
6. Reboot phone and go to recovery again, make a backup
6. Downlaod a jelly bean rom from the development forum and install according to instructions
If you have any questions don't hesitate to ask, but please read these threads first:
http://forum.xda-developers.com/showthread.php?t=1901191
http://forum.xda-developers.com/showthread.php?t=1809459
i nedd a links,where to download...
OK, post what your build number says in this thread. Then I will give you a link to what you have to flash.
XxPixX has provided them at the end of his post. the 1st one is for the kernel you need to place on the external SD..
here is a video on how to install the rom after rooting and CWM..& a NANDROID backup
http://www.youtube.com/watch?v=n45wQVrGfOc
xxpixx said:
ok, post what your build number says in this thread. Then i will give you a link to what you have to flash.
Click to expand...
Click to collapse
iml74.kxxlq3
Download this file onto you external sd card to your phone: http://www.mediafire.com/file/vb2k1v723923bjk/PhilZ-cwm6-XXLQ3-OXX-2.7-signed.zip
and follow the step I gave you in my first post
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you flashed that file? Download it onto your external memory, turn your phone off, press and hold all at once three buttons: volume up, home button, power button. Select install from sdcard (or something along those lines but NOT update.zip, preload etc.) and select that file. Once that is done either watch that youtube video nokiamodeln91 posted or have a look at roms in the development sections:
http://forum.xda-developers.com/forumdisplay.php?f=1349
http://forum.xda-developers.com/forumdisplay.php?f=1700
XxPixX;37654185
6. Reboot phone and go to recovery again said:
After root, I have to download it to a memory card CWM and make a backup ..?
Click to expand...
Click to collapse
Once you have flashed that file I gave you then copy a ROM (I suggest a TW ROM, link at the end of my post) onto your internal or external storage to your phone, go into recovery again (turn device off, hold power, home, volume up) and select backup. This will take some time. Then once that is done go for wipe data/factory reset (all of this in recovery), confirm, then wipe cache, then advanced => wipe dalvik cache. Once these wipes have been done you can select Install zip from internal/external memory card. Select the zip file you downloaded and you're ready
Here is the ROM: http://sourceforge.net/projects/ult...Ultimate_N7000_LSC_JB_4.1.2_v5.1.zip/download
XxPixX said:
As you are on a dangerous kernel (wiping data may follow with a hard brick) do not wipe your data untill you are on JB
1. Go into settings => about phone => build number
2. Search for a kernel that corresponds to your build number, ex you will have N7000XXLSC in your build number so you are looking for XXLSC (NOTE: Read the kernel thread and understand it). Download this file onto your external memory.
3. Turn your phone off, then turn it on by holding volume up, home button and power on button all at the same time.
4 Select install zip from sd card, select it and let it do it's thing.
5 Your phone will reboot if all goes well and you will be on a safe kernel and you will have root
6. Reboot phone and go to recovery again, make a backup
6. Downlaod a jelly bean rom from the development forum and install according to instructions
If you have any questions don't hesitate to ask, but please read these threads first:
http://forum.xda-developers.com/showthread.php?t=1901191
http://forum.xda-developers.com/showthread.php?t=1809459
Click to expand...
Click to collapse
ok, it should be like this ..?
First put philz.zip on ex.sd.
Then make the first set of steps. So I installed philZ .. After that I have to do Backup,
then put the ultimate ROM on sd and install it .. and that is it ..? I have a jelly bean on my cell phone ..?
Yes, but before you install the ultimate rom you have to do those wipes I mentioned
XxPixX said:
Yes, but before you install the ultimate rom you have to do those wipes I mentioned
Click to expand...
Click to collapse
after backup, i need to do 1. Wipe Data/Factory Reset, 2. Wipe Cache Partition, 3. Advanced -> Wipe Dalvik Cache., then
"Install Zip from sdcard" -> "Install from sdcard" -> "Jellybean 4.1.2." -> "YES".->after installing "reboot now".
after backup, I put the jelly bean on ex and just follow this video http://www.youtube.com/watch?v=n45wQVrGfOc
that is end????
lazo234 said:
after backup, i need to do 1. Wipe Data/Factory Reset, 2. Wipe Cache Partition, 3. Advanced -> Wipe Dalvik Cache., then
"Install Zip from sdcard" -> "Install from sdcard" -> "Jellybean 4.1.2." -> "YES".->after installing "reboot now".
Click to expand...
Click to collapse
You can follow these instructions and you will have jelly bean or you can follow the bellow instructions from 1:00 onwards:
lazo234 said:
after backup, I put the jelly bean on ex and just follow this video http://www.youtube.com/watch?v=n45wQVrGfOc
that is end????
Click to expand...
Click to collapse
XxPixX said:
You can follow these instructions and you will have jelly bean or you can follow the bellow instructions from 1:00 onwards:
Click to expand...
Click to collapse
ok, after backup i will fallow yt video, easier for me, because I see what he is doing.
God help me...
lazo234 said:
ok, after backup i will fallow yt video, easier for me, because I see what he is doing.
God help me...
Click to expand...
Click to collapse
be in a safe kernel and flash it already...
bikil said:
be in a safe kernel and flash it already...
Click to expand...
Click to collapse
He is on a safe kernel (Philz)
Related
New Recovery for are phone and i must say becasuse im the first to use it i will be using it instead of CWM
Heres the background form the Developer Raidzero
raidzero said:
---------------------------------
BACKGROUND
---------------------------------
Last year I made RZRecovery for the original Droid. It was a huge success, since then I have been asked to port to other devices. So here,
about 1 year later (after a lot of work... Remember, I *do not* know C), I have done just that. This will bring all the features of the old
RZR plus a few new ones including the epic rom.tgz install format from the days of yore to any device. I have built this recovery
specifically to handle all devices without the need for a recompile (except for Tegra2-based devices, they have to be recompiled because of
some libc bugs). I have made img files for a few devices to start with:
Click to expand...
Click to collapse
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------
WALKTHROUGH
---------------------------------
Volume up/down - scroll (can hold down to repeat scroll)
HTC - touch screen - scroll
Home - select
Back/Power - back
Recovery Menus
Code:
Main screen
Reboot android
Reboot recovery
Reboot bootloader
Power off
Wipe menu
Wipe all - wipe everything on the device except recovery
Wipe system (the ROM)
Wipe data (your applications and settings)
Wipe .android-secure (other applications and settings on sdcard)
Wipe boot (the main android kernel)
Wipe cache
Wipe battery stats
Wipe dalvik cache (cache of optimized dalvik executables)
Mount menu
Mount/unmount system (the ROM)
Mount/unmount data (apps and settings)
Mount/unmount sdcard
Enable/Disable USB Mass storage
Nandroid menu
Nandroid Backup
Perform backup
choose boot,data,android-secure,system,cache to back up
select if you want to auto reboot upon successful backup
Nandroid restore
Choose backup
choose boot,data,android-secure,system,cache to restore
select if you want to auto reboot upon successful restore
Compress existing backup
Choose backup
perform compression
Delete backup
Choose backup
Perform deletion
Install from sdcard
choose item to install:
APK, ZIP, IMG, (must end in rec.img or boot.img) .TAR, .TGZ
Preinstall Menu
Toggle backup before install (make a quick backup of the device naming it preinstall-date-time)
Toggle wipe data
Toggle wipe cache
Add to install queue
Clear install queue
Abort install
Perform install(s)
if(APK)
Abort APK install
Install to system
Install to data
Extras menu
Custom Colors
Random - randomly generated color, will save to sdcard
Any other color - will save to sdcard
Rave mode - a totally random color each time the screen is redrawn (every key press)
Show battery status - will show charge status, level, temperature if available
Recovery overclocking
Kernel will report the available CPU slots, pick one and it will set the max to your selection. Saves to sdcard
Plugins (if plugins are installed)
Download Link
http://rzdroid.com/ftp/recovery/gingerbread/2.1.4/RZR-2.1.4-swift-rec.img
Source
http://rootzwiki.com/topic/7309-recovery-rzrecovery-many-devices/
any improvments to cwm?
yeah it better lol personal preference wait until the dev posts the download link then you can try it yourself
yeah, got me excited but the download links aren't working - some server error...
thats because the dev hasent posted the links im the only optimus user that has it but i found a bug in the backup system so the dev is working on it
eoghan2t7 said:
New Recovery for are phone and i must say becasuse im the first to use it i will be using it instead of CWM
Heres the background form the Developer Raidzero
ScreenShots
---------------------------------
WALKTHROUGH
---------------------------------
Volume up/down - scroll (can hold down to repeat scroll)
HTC - touch screen - scroll
Home - select
Back/Power - back
Recovery Menus
Code:
Main screen
Reboot android
Reboot recovery
Reboot bootloader
Power off
Wipe menu
Wipe all - wipe everything on the device except recovery
Wipe system (the ROM)
Wipe data (your applications and settings)
Wipe .android-secure (other applications and settings on sdcard)
Wipe boot (the main android kernel)
Wipe cache
Wipe battery stats
Wipe dalvik cache (cache of optimized dalvik executables)
Mount menu
Mount/unmount system (the ROM)
Mount/unmount data (apps and settings)
Mount/unmount sdcard
Enable/Disable USB Mass storage
Nandroid menu
Nandroid Backup
Perform backup
choose boot,data,android-secure,system,cache to back up
select if you want to auto reboot upon successful backup
Nandroid restore
Choose backup
choose boot,data,android-secure,system,cache to restore
select if you want to auto reboot upon successful restore
Compress existing backup
Choose backup
perform compression
Delete backup
Choose backup
Perform deletion
Install from sdcard
choose item to install:
APK, ZIP, IMG, (must end in rec.img or boot.img) .TAR, .TGZ
Preinstall Menu
Toggle backup before install (make a quick backup of the device naming it preinstall-date-time)
Toggle wipe data
Toggle wipe cache
Add to install queue
Clear install queue
Abort install
Perform install(s)
if(APK)
Abort APK install
Install to system
Install to data
Extras menu
Custom Colors
Random - randomly generated color, will save to sdcard
Any other color - will save to sdcard
Rave mode - a totally random color each time the screen is redrawn (every key press)
Show battery status - will show charge status, level, temperature if available
Recovery overclocking
Kernel will report the available CPU slots, pick one and it will set the max to your selection. Saves to sdcard
Plugins (if plugins are installed)
Download Link
http://rootzwiki.com/topic/7309-recovery-rzrecovery-many-devices/
Click to expand...
Click to collapse
Where did you get it for the LG GT540?
Sent from my GT540 using Tapatalk
eoghan2t7 said:
thats because the dev hasent posted the links im the only optimus user that has it but i found a bug in the backup system so the dev is working on it
Click to expand...
Click to collapse
How long will it take?
Sent from my GT540 using Tapatalk
a friend of mine uses this recovery. i would love to give it a go. what scripts does this support?
Sent from my GT540 using XDA App
liamwilli said:
How long will it take?
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
not sure Raidzero is currently converting his sources from CM to AOSP then he is sending me the new version to test the backup and restore system
eoghan2t7 said:
not sure Raidzero is currently converting his sources from CM to AOSP then he is sending me the new version to test the backup and restore system
Click to expand...
Click to collapse
Well, it had better be soon. I'm exited and impatient. Not a good mix!
Sent from my GT540 using Tapatalk
Nice lookin recovery gonna try it hey eoghan keep me updated!
Cool, where's the DL link for our device, or is not yet ready?
Its not fully ready the dev is working hard on it
@chaos read a few post earlier i think they found a bug...
Thanks 4 the tip lol!
The download was on his ftp. It was annoying, so I'll re upload!
Sent from my GT540 using Tapatalk
Here is the link:
Link Removed
Flash with fastboot or flash_image
Sent from my GT540 using Tapatalk
gonna try it!
How do u boot into that recovery?
Sent from my GT540 using xda premium
androidboss7 said:
How do u boot into that recovery?
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
aint it the same? i i flash a few tweaks so far so good! plus they let you line up all the different files you want to flash so that you do not need to keep selecting the next item after you have flash one!
I searched for more than 3 hours to root and install CM 10.1.2 on my Samsung Galaxy S i9000
but i dont find anything good i lost my mobile :crying: then it works again :silly:
my mobile information:
GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000JHJV9
Build number: GINGERBREAD.JHJVG
Thank you.
i found it to use these files and kernels
https://app.box.com/shared/z2jmmzres0
a video but in Arabic
http://www.youtube.com/watch?feature=player_embedded&v=6WiuaSlKYC8#t=244
is it right????
sycolon said:
GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000JHJV9
Click to expand...
Click to collapse
Follow this and root only after your firmware is 2.3.6
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Use Samsung Kies and update your phone to a newer build.
Download a root package from here (search for your build after the update) : http://forum.xda-developers.com/showthread.php?t=788108
Download odin3 1.85 and flash the rom (in odin only put the tar file in the pda box - the phone has to be in download mode {volume down+power+home pressed}) .
Go online (google play) on the phone and download the clockwork mod and install it.
Download the latest stable CM10.1.2 from here: http://download.cyanogenmod.org/?type=stable&device=galaxysmtd
Put the cm10 archive on the sd card and power off the phone.
Enter in the recovery mode (volume up + power + home) and using the volume select Wipe Data/Factory Reset and in advanced Wipe Dalvik Cache. Go back and select install zip from sd card. If it's done quick do the install from zip again.
The full tutorial here: http://forum.xda-developers.com/showthread.php?t=1494493
Do the root like i said because it's easy and then follow the guide from point 4 "• Using the volume buttons to navigate up and down select..."
After search for a google play app pack (gapps) and put it in the sd card and install it using recovery mode.
I did this yesterday and it works great.
i made the same as i told you in the last post
"i found it to use these files and kernels
https://app.box.com/shared/z2jmmzres0
a video but in Arabic
http://www.youtube.com/watch?feature...uaSlKYC8#t=244
is it right????"
and i installed CM 10.1.2
and all i s ok for now, i have 2 problems no service and the mobile reboot from its own when i dont use it....crazy
is it possible that i have the problem cuz i didänt make Lag Fix for it????
do you have the clockwork mode installed?
go back in recovery mode and wipe data/dalvik again and install cm10 again.
sycolon said:
is it possible that i have the problem cuz i didänt make Lag Fix for it????
Click to expand...
Click to collapse
yes i have it... i will try .... do i install CM 10.1.2 ?
Yes.
i tried to make it but still the same problems
i made the CM 10.1.3 and still the same problem, automatic rebooting wjen i dont use the mobile and no service .....
yes finally i fix it, thanks guys for all, but i did it in my way yeaaaaaaaaaaaah
Does it work? Are you happy with CM?:good:
sycolon said:
yes finally i fix it, thanks guys for all, but i did it in my way yeaaaaaaaaaaaah
Click to expand...
Click to collapse
yes i'm using the CM 10.1.3 Rc2 and its fantastic........... i love it
the only thing i found weird in the CM that he mentioned that the memory is 368MB just of 512MB !!!!
sycolon said:
the only thing i found weird in the CM that he mentioned that the memory is 368MB just of 512MB !!!!
Click to expand...
Click to collapse
Don't worry about that. Part of memory has been reserved by the CM. You may like the CM10.2, it is in nightly stage but even faster than 10.1.3 and you will have about double battery life. But read very carefully whole first post before installing it. It is bit odd way comming from cm10.1.3
Or quote my text (reply this e-mail) and I will send you the workflow, it isn't absolutely clear written in the opening post ofnthe thread.
tetakpatak said:
Don't worry about that. Part of memory has been reserved by the CM. You may like the CM10.2, it is in nightly stage but even faster than 10.1.3 and you will have about double battery life. But read very carefully whole first post before installing it. It is bit odd way comming from cm10.1.3
Or quote my text (reply this e-mail) and I will send you the workflow, it isn't absolutely clear written in the opening post ofnthe thread.
Click to expand...
Click to collapse
thanks you so much then i wish to have the instructions about upgrading to 10.2
Update-Desc http://forum.xda-developers.com/showthread.php?t=2385178
The rest of RAM is reserved for audio/video coding ,example camera for HD-mode and kernel for the linux system
Some Kernel support RAM up to 408MB but with no HD-support then...
sycolon said:
the only thing i found weird in the CM that he mentioned that the memory is 368MB just of 512MB !!!!
Click to expand...
Click to collapse
More information about RAM (in example the semaphore kernel ...http://www.semaphore.gr/how-to/use-semaphore-jb
"Bigmem
When the kernel boots, it reserves some RAM to be used by some drivers (video, capture, JPG) for DMA (Direct Memory Access). In Linux kernel this reservation have to be done only during boot. It was found that using less reserved memory for video capture, the kernel can operate normally without issue with the only regretion that 720p video recording is not possible. Enabling this option will leave ~13MB more available RAM.
Phone must be rebooted to enable this feature. After the device powers down the information about this option is lost and you have to reboot the phone again.
Default: Disabled"
freakymod2120 said:
Update-Desc http://forum.xda-developers.com/showthread.php?t=2385178
The rest of RAM is reserved for audio/video coding ,example camera for HD-mode and kernel for the linux system
Some Kernel support RAM up to 408MB but with no HD-support then...
Click to expand...
Click to collapse
Upgrade workflow to the CM 10.2
sycolon said:
thanks you so much then i wish to have the instructions about upgrading to 10.2
Click to expand...
Click to collapse
Ok, from CM10.1x it should work like this:
This is the thread of CM10.2 development for the i9000:
http://forum.xda-developers.com/showthread.php?t=2385178
Read whole the first post there.
Preparation:
Before upgrading, first prepare all this for the case anything goes off the plan (it shouldn't, but who knows...):
make nandroid backup
download zip files of your presently used ROM (cm10.1.3) and gapps for Android 4.2.2 and save them in your phone
download zip files of the new ROM you want to install (cm10.2) and gapps for Android 4.3 and save them in your phone
boot your phone into the recovery mode (CWM) and check if all zip files are visible
Now if all the files are visible you can upgrade (some CWM recovery versions can read zip files only from the external SD, some other versions only from the internal SD card, some both). If they are not visible, don't even try upgrade (and don't wipe any data) but reboot phone and move the zip files to another place (for example if they were not visible on internal SD, move them to the external SD card) and after you moved the files, do again the check like I wrote you above.
Upgrade:
make factory reset/wipe data
wipe cache
wipe dalvik cache under "advanced"
install zip of the CM10.2 nightly build (possibly you need to install twice, as it uses different re-partition and only warns the first time)
install the Gapps for 4.3 right after, while still in recovery
while still in recovery go to "advanced restore" and restore only /data from your last nandroid backup of the cm10.1.3
go back to first menu, reboot
enjoy, all your data from presently used cm10.1x build should be there, including Google account
If anything should go wrong, make the same procedure like you did for the installing CM10.2, wipe all and make factory reset, after that just instead of the CM10.2 zip flash your CM.10.1.3 zip and gapps for Android 4.2.2, reboot, boot again to recovery, restore your whole nandroid backup of the CM10.1.3 build.
Let me know if it worked well
Main thread + Features + Dev support
http://forum.xda-developers.com/showthread.php?t=2201860
CWM 6.0.4.8 Advanced Edition / PhilZ Touch Recovery 6.41.6
PhilZ Recovery is a CWM Advanced Edition that adds all the features you could ever miss in CWM.
It is a well proven recovery for many phones.
Please give your feedback, what works, and any bug you could encounter.
Read the features at the Main thread, and check if you are missing something.
To take a screen shot, just slide left!
And don't forget to read about powerful aroma file manager integration and double-tap shortcut (in FAQs).
How to install recovery?
From download link below, you'll get a 'recovery.img' file. Put that recovery.img file at root directory of your
sdcard. (means not in any folder)
Now, go to terminal emulator.
Give command:
Code:
su
You'll be asked to grant superuser permissions, grant it.
Now, give the following command:
Code:
flash_image recoveryonly /sdcard/recovery.img
Wait until it executes the command (4-5 seconds), it is installing the recovery.
Now, normally reboot to recovery and enjoy new recovery!
Download links
Latest version can be found here:
recovery.img (v6.41.6)
https://docs.google.com/uc?id=0B5c3gpyMBJusWi1XN09fZjkzUWM&export=download
aromafm_tass.zip (v1.91)
https://drive.google.com/uc?id=0B5c3gpyMBJusLTk5ZENsNWpudms&export=download
Click to expand...
Click to collapse
Special thanks to:
@Phil3759 : For this awesome open source recovery.
@chraso: For hosting and compatible flags.
AndroidARMv6 Team: For keeping this device alive.
Cyanogenmod Team: For making all these possible.
XDA:DevDB Information
PhilZ-Touch Recovery for Galaxy Mini, Tool/Utility for the Samsung Galaxy Mini
Contributors
Bhargav97, chraso, Phil3759
Version Information
Status: Stable
Current Stable Version: 6.40.1
Stable Release Date: 2014-05-04
Created 2014-05-07
Last Updated 2014-05-26
:FAQs:
Q: Wanna know about Aroma File manager?
Visit the aroma file manager main thread for more info---> Aroma file manager main thread
Aroma file manager is a touch file manager which can be used while in recovery. It has options for copy, paste, delete,
change permissions and many others. Also, it has a Terminal inside. So, if you forgot to give correct permissions to any
file you can do that directly from recovery. This file manager has got many themes, font, icons, etc. options and it's UI
is fully customizable.
Q: How to start this File manager in Recovery?
Rename the downloaded file to 'aromafm.zip'.
Create a folder 'aromafm' inside 'Clockworkmod' folder on your sdcard.
Now, move that 'aromafm.zip' file to the 'aromafm' folder.
We're ready now, when you want to use it in recovery just double tap anywhere OR go to "philz Settings" and select
"Aroma File Manager" and it will start up.
If you also want to browse /data, /system and /sd-ext then mount them in the "mounts & storage" option in recovery.
Q: Problems with Aroma file manager startup?
After doble-tapping OR selecting 'Aroma file Manager' option under 'philz settings' if recovery gives error: 'aromafm.zip
not found at /clockworkmod/aromafm' then, wait for 4-5 seconds and again select 'Aroma file Manager', because it maybe
busy mounting sdcard.
If still doesn't work, you've made mistakes in steps mentioned in first post, please do again carefully.
Q: Does your phone every time reboots to recovery?
This happens very rare when you flash the recovery using any bad app or via any wrong (not proper) method. What you can do
is:
-If you've made a backup of your current ROM then just restore only it's "boot" and then select 'reboot to system'.
OR
-You don't have a backup? Then just flash the ROM which you are using currently again and wipe 'dalvik-cache'. Then reboot
to system. Booting process will take time.
NEW: Now you can enjoy the full version of the recovery! Thanks to @Phil3759 for uploading necessary commits for armv6. And, everything is expected to be bug-free. Please report the bug here if you find any.
GALAXY MINI GOES OFFICIAL NOW!!!!!!
You'll now find Galaxy Mini in the officially supported devices list at the Main thread.
SCREENSHOTS:
Main menu and PhilZ Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GUI Preferences: all is applied live (no reboot). Up to 14 menu height settings, scroll sensitivity, touch accuracy...
27 color settings + 5 alpha transparency levels for every GUI element
Change background image with a custom png (of your device resolution), a solid color (27 presets) or revert to original
cwm image
User configurable touch gestures (feel free to request for new actions)
Setup your time-zone + 30mn offset, super wipe option to install a new ROM
Backup and Restore any partition in a complete freedom, include modem (.img + .bin) and efs (.img + .tar)
Custom backups can also be restored by original CWM Advanced Restore Menu
TWRP Backup and Restore Support + md5 + single/multivolume format
Support multi-cpu compression, md5 check toggle and custom .android_secure path
Choose ors backup volume target
Flash multiple zip files in a raw
Aroma File Manager + Terminal Emulator: launch with a gesture action (double tap is default)
Full Wipe to Install a new ROM (sdcard is preserved)
Free Browse Mode to install zip files: select a default folder to start with and browse up to the root
Hello and thank you for your work but it reboot to recovery again and it says that cant find aroma.zip in path.
alexanderq said:
Hello and thank you for your work but it reboot to recovery again and it says that cant find aroma.zip in path.
Click to expand...
Click to collapse
u hav to rename it to aromafm.zip
and yeah The Rom doesn't boot after installing this recovery
Faiyaz5yaz said:
u hav to rename it to aromafm.zip
and yeah The Rom doesn't boot after installing this recovery
Click to expand...
Click to collapse
You mean, you are always rebooting to recovery and not to your rom?
If so, it is a problem of your device configuration by your device developer because this happens also in Jenkins recovery. This is not a fault of my recovery.
Now, you can restore boot of a backup (if you made any) or you can install your current rom again and wipe dalvik cache and you'll be back normal.
But i have renamed the zip and it does not work.And i tried another ROM but it all ways reboots to recovery.
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Good work bro.:thumbup:
Sent from my GT-S5570 using xda premium
no
Bhargav97 said:
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Click to expand...
Click to collapse
I didn't restore back up..
I reflashed my previous cwm..
it booted normally
Bhargav97 said:
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Click to expand...
Click to collapse
I confirm it. I even flashed another ROM and it still reboots to recovery instead of system.
Aroma FM works, but there is something I noticed: If you tap internal sd or external sd, they are empty, you have to go to storage/sdcard00 to get to your sd card. Can you somehow link the external sd to the sd card?
Thanks everyone for reporting....
I'll try to fix this when I get time...
ast00,
Internal sd and External sd will be empty because they are kept there for devices having two different memories. There should be an option: sdcard directly on the root directory. Please see carefully.
Good news:
My friend @chraso gave me hint about the problem. There was a very small problem with tags, I'll be fixing and making updated recovery today/tomorrow. Will also update recovery sources.
First post updated with newer version, v6.22.1 (18.03.2014) and also made changes so that you can boot into ROM after installing it. Hope it's fixed.
Also added some FAQs.
Please post back the Results after using it.
Please give feedback on swipe-touch. Is right/left swipe working? And please post your opinion on the poll above, whether you like swipe touch or it just makes things complex or you just don't like it.
Bhargav97 said:
First post updated with newer version, v6.22.1 (18.03.2014) and also made changes so that you can boot into ROM after installing it. Hope it's fixed.
Also added some FAQs.
Please post back the Results after using it.
Please give feedback on swipe-touch. Is right/left swipe working? And please post your opinion on the poll above, whether you like swipe touch or it just makes things complex or you just don't like it.
Click to expand...
Click to collapse
flashed the latest zip
still not booting into the same rom..
didn't test new rom
Faiyaz5yaz said:
flashed the latest zip
still not booting into the same rom..
didn't test new rom
Click to expand...
Click to collapse
Which ROM are you installing?
Is the install successful?
What procedure you follow? This is important, please tell me. Do you use 'wipe to install a new rom'?
Does not work for me either, it reboots to recovery and i noticed that to make aroma work i must first install the zip from recovery and then it works OK .
not that
Bhargav97 said:
Which ROM are you installing?
Is the install successful?
What procedure you follow? This is important, please tell me. Do you use 'wipe to install a new rom'?
Click to expand...
Click to collapse
I mean I just changed the recovery didn't touch any roms.. after changing recovery , it keeps bootin to the recovery
Bro,
please read FAQs, this is a problem of your device sources. For solution, see FAQs.
After that, please give me broader report.
You di not ask the right question:
Does this work for someone , anyone please confirm.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE 3G VARIANT (SM-N750) RUNNING KITKAT (4.4.2)
Philz recoveryorignal thread here
Why CWM ? Why not a pre-rooted firmware which will not void warranty?
Ans : CWM has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Note Neo logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
@k2wl
philz3759
@sgatechwork
CHANGELOG
Code:
[B][COLOR="Red"]BUILD 4[/COLOR][/B]
-FIXED FORMAT , WIPE CACHE AND BACKUP AND RESTORE
[B][COLOR="Red"]BUILD 3[/COLOR][/B]
-EXTERNAL SD CARD FIXED - BIG THANX TO @sgatechwork FOR THE MOUNTS
- BACKUP AND RESTORE WORKING
[B][COLOR="Red"]BUILD 2[/COLOR][/B]
-WIPE CACHE FIXED ( BACKUP OF CACHE STILL NOT WORKING)
-A BIG THANX TO @sgatechwork FOR TESTING
[COLOR="Red"][B]BUILD 1[/B][/COLOR]
INITIAL BUILD
Finaly I'm able to root my phone. Thanks a lot
thanks bro for your effort and finally some development for note 3 neo....
but what does the bug in external sd card mean??
does the phone not read the card or something else??because sd card is very important to me...
-HellRaiser- said:
thanks bro for your effort and finally some development for note 3 neo....
but what does the bug in external sd card mean??
does the phone not read the card or something else??because sd card is very important to me...
Click to expand...
Click to collapse
it doesnt read the external sd card ... but internal works properly ... and dont try wipe cache it bootloops ... external sd card will be fixed soon
by not reading external card you mean the recovery cant read it only or the phone cant read it at all while using....if otherwise then i should better wait for a fixed bulid....and does this mean samsung released the kitkat kernal sources???
if yes then once this recovery is fixed then maybe we can make a custom kernal....what do you say OP about that?
-HellRaiser- said:
then i should better wait for a fixed bulid....and does this mean samsung released the kitkat kernal sources???
if yes then once this recovery is fixed then maybe we can make a custom kernal....what do you say OP about that?
Click to expand...
Click to collapse
samsung hasnt released the source code yet ... it takes time after the kk update ..say abt 3-5 weeks .. i hv emailed them .... this uses a prebuilt kernel
U CAN USE THE RECOVERY IF U WANT TO FLASH SUPERSU .. THAT WORKS FINE
rutvikrvr said:
samsung hasnt released the source code yet ... it takes time after the kk update ..say abt 3-5 weeks .. i hv emailed them .... this uses a prebuilt kernel
U CAN USE THE RECOVERY IF U WANT TO FLASH SUPERSU .. THAT WORKS FINE
Click to expand...
Click to collapse
by not reading external card you mean the recovery cant read it only or the phone cant read it at all while using in normal mode....
-HellRaiser- said:
by not reading external card you mean the recovery cant read it only or the phone cant read it at all while using in normal mode....
Click to expand...
Click to collapse
lol ...obviously only the recovery cant read it ......
in the rom it works
rutvikrvr said:
lol ...obviously only the recovery cant read it ......
in the rom it works
Click to expand...
Click to collapse
thanks bro....will try tomm....and yeah good work man....
Ive flashed and SD card isn't detected only in recovery and root works all well after flashing supersu .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally....
Is backup & restore working properly????????
KSKHH said:
Finally....
Is backup & restore working properly????????
Click to expand...
Click to collapse
Pl try ... But don't backup cache ..or restore it
rutvikrvr said:
Pl try ... But don't backup cache ..or restore it
Click to expand...
Click to collapse
Hi OP first thanks a lot for your time to develop this.
Tell me one thing...suppose the situation come some time when I face bootloop due to lot of unnecessary R&D with the phone. At that moment if I restore then will it give me the option to untick Cache. Becoz I did not find it in my S3.
Till now I was using TWRP in Note 3 Neo, however due to Kitkat TWRP gone where there was a option to untick.
EDIT: Ok I see there is a custom backup option...Thanks.
try to find advance restore
Yipppppppeeeeyyyyyyyyyyyyyyy.. Got rooted after update.. Thanks
priyansh17 said:
Yipppppppeeeeyyyyyyyyyyyyyyy.. Got rooted after update.. Thanks
Click to expand...
Click to collapse
Do hit thanx button
Done
Restoration not working..
I have not taken backup of Cache nor restoring it.
KSKHH said:
Restoration not working..
I have not taken backup of Cache nor restoring it.
Click to expand...
Click to collapse
added to known issues
BUILD 2 IS UP
-WIPE CACHE FIXED ... (BACKUP OF CACHE STILL NOT WORKING)
DOWNLOAD LINK IN OP
Oxygen OS 4.0 Nougut Mirror Links:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HTML:
Thanks is Appreciated :)
Main Mirror
MEGA :
https://mega.nz/#!KoAiWIRR!gG4wjTg37bzHc4Q_OXqjYVSZOCTuvL1zNGGy1iIwB8w
EXTRA Mirrors(Tested 01/01/2017 4:15 AM IST)
Google Drive Mirror:
https://drive.google.com/file/d/0BzS3nWITUqU_Sk5yQkRqWkhFY3c/view
Official from OnePlus site:
http://otafsc.h2os.com/patch/amazon...en_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Modified TWRP:
twrp-3.0.2-1.28-oneplus3.img
Flashing Instructions :
With TWRP Recovery(Make sure you are in F2Fs to avoid DM-verity Error)
HTML:
1. Download the Full Zip on your phone internal memory.
2. Download the Latest SuperSU 2.79 SR1
4. Reboot To TWRP (Modified 28) & Take a Nandroid of your existing ROM
5. Go to Wipe > Advance Wipe > Select Dalvik & Cache & Swipe to Wipe
6. Install Menu > Select Rom Zip > Swipe to Flash
7. Wipe Dalvik & Cache
8. Flash SuperSU to maintain root
9. Reboot System and Enjoy
Side Load:
HTML:
Download the zip file for your device by using above any link.
Make sure you have all necessary adb files installed on your computer.
Reboot your phone into recovery mode. To do this, shut down your device and turn it back on while holding the power and volume down buttons simultaneously.
Choose “Install from USB†option in the recovery screen, tap OK to confirm. A screen with “You are in sideload mode†will be displayed.
If you are not using the original Oxygen Recovery. View instructions for TWRP Recovery to flash OxygenOS Recovery .
Connect your device to PC/Mac, run following command in command prompt / terminal
For Windows: “adb sideload <filename>â€
For Mac/Linux: “./adb sideload <filename>â€
Wait a while, your phone should now update to the selected build and reboot automatically to take you into OxygenOS.
Clean Flash:
HTML:
Put Zip anywhere in Internal Storage.
Power Off Your Phone.
Reboot into recovery by pressing Power + Volume down button .
Select English.
Select Wipe Data and Cache. It might take some time.
Go to recovery home.
Select Install from Local.
Select the Zip.
Click on Install
Wait for it to Install
Reboot.
You are Done.
Dirty Flash:
HTML:
Put Zip anywhere in Internal Storage.
Power Off Your Phone.
Reboot into recovery by pressing Power + Volume down button .
Select English.
Select Install from Local.
Select the Zip.
Click on Install
Wait for it to Install
Reboot.
You are Done.
NS. S Dirty Flash is working from OpenBeta 10 to OxygenOS 4.0
Thanks
I can't download from this links
vagelis74 said:
I can't download from this links
Click to expand...
Click to collapse
Uploading MEGA Also..will share soon
full zip ?
akuma48465 said:
full zip ?
Click to expand...
Click to collapse
Yes
ansaziz777 said:
Oxygen OS 4.0 Nougut Mirror Links:
NS. S Dirty Flash is working from OpenBeta 10 to OxygenOS 4.0
Click to expand...
Click to collapse
Please post the link for TWRP recovery users also... and do mention all the steps.... Please, please, please...
Links dont working.
submundo said:
Links dont working.
Click to expand...
Click to collapse
Mega upload is going on 75%, will update the link soon
Normas Interruptor said:
Please post the link for TWRP recovery users also... and do mention all the steps.... Please, please, please...
Click to expand...
Click to collapse
Done
submundo said:
Links dont working.
Click to expand...
Click to collapse
vagelis74 said:
I can't download from this links
Click to expand...
Click to collapse
Mega Link is live now
Found a strange problem.
I did what you wrote in the description about installing the rom through twrp. But i get Dm-verity.
I have .28 twrp version . F2Fs done. and still i get the thing? Dont know why? :S
I am on open beta 10. Can i flash this update via stock recovery?
Can you add into your instructions how to get f2fs via TWRP. For those of us who are either on 2.2.8 or beta 10 and running ext4.
nfremd said:
Can you add into your instructions how to get f2fs via TWRP. For those of us who are either on 2.2.8 or beta 10 and running ext4.
Click to expand...
Click to collapse
Instruction:
NB: Changing to f2fs will erase all data. Take nand backup and keep it safe somewhere like PC/usb
Ext4 will show DM-verity error
1.Install Titanium backup
2.Backup settings and user apps
3. Copy to PC
4. Goto wipe-- system -- repair and change to f2fs
5. Repeat the step for data also
6. Mount and copy rom.zip and supersu2.79 sr1
7.flash from and flash SuperSU
8.reboot and complete.install Titanium and restore data back
Best way to install:
1. flash oxygen recovery
2. adb sideload Rom.zip
3. boot to fast boot and flash twrp28
4. Boot to recovery and install supersu2.79sr1
5.reboot and enjoy
Zero errors in second method.working like charm
mabmed said:
I am on open beta 10. Can i flash this update via stock recovery?
Click to expand...
Click to collapse
You can sideload
Did download the mega file twice, but my command line in windows says "cannot read file" while using adb sideload. anyone else having this problem?
christophs01 said:
Did download the mega file twice, but my command line in windows says "cannot read file" while using adb sideload. anyone else having this problem?
Click to expand...
Click to collapse
I am also having this problem, I was previously on 3.2.8. @ansaziz777 any suggestions?
Where can I find superSu 2.79?
Enviado do meu ONEPLUS A3003 através de Tapatalk
salomaoa said:
Where can I find superSu 2.79?
Enviado do meu ONEPLUS A3003 através de Tapatalk
Click to expand...
Click to collapse
google is ur friend