[Q] Galaxy s9000 soft brick - Galaxy S I9000 Q&A, Help & Troubleshooting

Please Help me. Yesterday i brick my samsung galaxy s i9000 phone through kies. Now i tryed to unbrick through odin3. I download the 512 .pit file and added the file to odin and my phone is recoganising odin aswell. Odin start analizing the file .But no further acion. Please help.

have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1

Related

[Q] How to flash Galaxy S M110S (Korean version) with Odin?

Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Can anyone help me?
Mabumap2k6 said:
Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Click to expand...
Click to collapse
No need to use PIT file - put firmware file (DH19 etc) into PDA field
Dont change any options
If your Korean i suggest to check out - matpclub.com - korean smartphone community
I fixed my bricked phone using JP3 firmware from samfirmwares.com and the Korean Froyo 2.2 update (which I found in Google)and used Odin. I'm pretty sure its not supposed to work but it did for me and now I have Froyo on my Samsung Galaxy S Shw-m110s The only problem now is there are two boot screens. The Regular galaxy S boot up and the Korean one lol
brother u have any link for this phone ı have same phone korean galaxy
my shw m110s anycall
i flashed it by odin flasher it was dg24
i flashed it with dg23 firmware and then it field i dont know what to do
plz help me
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
No links to show PIT M110S
mhammadleo said:
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Click to expand...
Click to collapse
hi, i cant find any recovery zip and i cant find m110s.pit...
links not work.
it really works fine?
please, tell me at greater length how i need to do to fix my phone, thank you
sorry my english(
karabey said:
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
Click to expand...
Click to collapse
Hi mate link is not working please can u give me working link?
THANKS
Hello Guys
Well i have m110s 16 gig and it has ginberbread installed couple of weeks back i was copying files and it screwd my phone and since then it gives me an error that damage internal sd card. Guys ofcourse it's not hardware issue because i have seen the motherboard of m110s and thre is CHIP(rom) in there for storage and if i can flash my phone with different vertion of rom back and forth then it means the memory works just fine. I belive it could be problem with partion. because i can see only 98 mb of space which it allocates for cahe. I think possible solution could be stock Pit file or Bootloader or both of them. if i flash it with stock files i guess things would get ok.
But seriously guys it's annoying me now as i can just use it as phone and not smartphone.Can you guys help me out in this.
Thanks

[Q] Galaxy Tab p1000 Dead ... Freeze Samsung Logo

Is there a solution to this problem ?
Galaxt Tab p1000 Freeze Logo samsung
i try work s.w by Odin .. But Give me Error
New problem after falshing ,, now my tab Frezz Samsung Logo , and when try setup new s.w Give Error
you are using the wrong pit file. Go to samfirmware.com and download the correct one that corresponds your firmware.
Download this PIT file: http://www.multiupload.com/ZL9HDOGI5V put in the PIT section and put the others file like you did and then try again.
Good luck.
Same problem
Same problem ..
There is nothing new and the same error
hey bud have a look here
http://forum.xda-developers.com/showthread.php?t=1133590
looks like wrong CSC--should be P1000JPJM5-REV03-EMMC-CL869932.tar. download the correct file from samfirmware here
Click on Re-Partition, it's not enabled in your screenshot.
Regards
i feel same problem . now solve with flash .
if your problem not solve post here or search i already post .​

[Q] looking for 818 pit file for use with odin

hi guys, i am using a samsung galaxy i9000m and i am looking for a 818 pit file for use with odin or a full dump for samsung galaxy i9000m so as to flash downgrade or restore my phone from a bad flash. please help
You will find it on sammobile(.)com

[Q] i need help for my friend's sgs 1

hi frnd i own a Xperia Neo V but here i am for my frnd he has did something wrong with his phone and its not booting up i can enter recovery/download mode i just want to knwo how to flash i9000
i have downloaded
Flashprogram Samsung I9000 + Pits
firmware version XAJW5_XEU from samfirmware
i have flashed 5830 and 5801 but i dont find odin to be similar as them
can any1 tell me how to flash i9000 and what pit to use cause i can see 3 pits in it
803
513
512
or a full procedure will be helpful
am just trying to help my frnd to fix his S1
you will need to have the galaxy S drivers installed on the computer they can be downloaded and installed as part of Kies or seperatly from a thread in the I9000 (SGS) section of XDA just search for "Samsung Drivers.exe"
As for flashing Phone put it into download mode and connect USB cable
If the file downloaded is a single file .TAR place into PDA of odin
if 3 file place PDA into PDA, CSC into CSC and PHONE into PHONE and flash.
Most GingerBread ROMs use 512 PIT check on samfirmware as to the suggested PIT file.
NOTE a pit file is not always required but cannot hurt. just ensure that repartition is not checked
what will happen if i re partition it.. will it format everything
imranaryan said:
what will happen if i re partition it.. will it format everything
Click to expand...
Click to collapse
re partition will fully wipe the OS partitions, not the SDcard partition but sometimes errors do occur with the SDcard.
The ROM on the phone does retain a copy of the PIT file and can access it during a odin flash.
it is very important to use the correct pit file for the rom or it will not boot

[Q] Help: Galaxy S Advance - Softbrick Recovery

Hi, Im new here, Im trying to upgrade my Galaxy S Advance GT-I9070 from 2.3.6 GB to JB using ODIN, I accidentally downloaded the .tar file for Galaxy S2 GT-I9100, upgrade failed, now my phone is soft bricked, Kies cant recognize my phone for recovery, I read some tutorials to unbrick it using ODIN, cant find the right path/file to do it.
heres what I see in after pressing Vol Down/HOME/Power:
ODIN MODE
Product Name: GT-I9070
Custom Binary Download: No
Current Binary: Samsung Official
what files I need to download to restore it back to GB then upgrade to JB? Thanks in advance!
Problem Solved: I downloaded "I9070DXAMD1_I9070OLBAME1_HOME.TAR.md5" and install it, it worked!
Mods Pls close, thanks XDA!
You was lucky, it could be hardbrick. Never flash other phones firmware.

Categories

Resources