Please Heelp! Stuck at "Samsung Galaxy Note GT-N7000" - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

i just flashed the last official german jb rom with odin. everything ok. after that i rooted it with root+bsybox signed zip (called safe method). the n i put a revovery with rom manager (6.0.1.2) and i tried to flash awsomebeats. flashed with cwm, everything ok, but at the reboot stuck at logo and the recovery went back to stock. i flashed again with odin the jb rom, everything ok but again stuck at logo. i already had a hardbrick, and after that i couldn,'t flash anything. help me solve the problem.

Can you boot into download mode?
Sent from my GT-N7000 using Tapatalk 2

why not root using one of Philz kernels. then make a nandroid back and then go on about flashing mods

R: Please Heelp! Stuck at "Samsung Galaxy Note GT-N7000"
Please close. Solved problem. Reflashed jellybam, then formatted everything with cwm and then flashed stock via odin. Evwrything ok.
Sent from my GT-N7000 using xda premium

Related

[Q] [Galaxy Note n7000]Stuck on boot screen after Flashing with SpeedMod kernel k2-12

Hi guys,
My galaxy note had stock ICS (indian version), I rooted it using rooting only instructions from: http://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475
Rooting worked fine, after that I flashed my device with speedmod kernel k2-12 using mobile odin. After that it just rebooted & got stucked at boot screen.
Any suggestions? what should I do next?
Well you did an amazing thing.
You flashed a gingerbread kernel on a ics rom. That will never bootup.
Download on pc k3 the ics kernel and stick it on your externalbsd card and flash that in recovery. Then all will be fine.
You need the zip one for that
Sent from my GT-N7000 using Tapatalk 2
Okay! Thankz 4 info but anyway I managed to do wat I actually intended to do.
After getting trapped in boot loop, I flashed stock Ics kernel using pc odin & then rooted with same dr ketan's method. Finally flashed speedmod kernel yes this time k3 one using mobile odin. . .everything seem to work fine now.
Just for a note while i was flashing stock kernel using stock kernel, it dint work some yellow '!' came up on screen saying connect to kies n blah blah!! I simply tried same procedure again n it got flashed.
P.S. Happy flashing :thumbup:
Sent from my GT-N7000 using Tapatalk 2
Good on yah!
Happy flashing 2
Sent from my GT-N7000 using Tapatalk 2

[Q] How to flash Hydracore via PC Odin

Hello guys,
So I just downloaded the leaked official JB ROM for my N7000 and flashed it successfully via Odin (I came from the latest CM10 Nightly build).
After that I wanted to flash the latest Hydracore to have my phone rooted, but apparently it comes in .zip format only.
Since I'm not rooted and I don't have CWM now, how can I get to flash Hydracore via PC Odin?
Hope someone has the answer for this, as the internet is just full of bullocks all websites are describing the same non working procedure....
Thanks all
//M
Sent from my GT-P6800 using xda app-developers app
latest jb leak does not work with hydracore. If you want to root use philz kernel zip file and install using stock recovery.
Sent from my GT-N7000 using xda premium
Thanks much
will do so... I already flashed Hydracore and now I'm stuck @ Samsung's logo
Hopefully I won't face such issues again
Sent from my GT-P6800 using xda app-developers app
Well, I've downloaded both v3.65 .zip files (XXLSA and XXLS7) and tried flashing them through CWM which was already on the device.
After rebooting either, it goes into a black screen after the initial boot screen (Galaxy Note GT-N7000).
Bear in mind I had already flashed Hydracore before that...
Any helpers as to what I'm doing wrong?
Should I reflash the stock ROM via PC Odin then flash Philz kernel via stock recovery?
Thanks in advance
P.S. I know I messed up big time
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
antique_sonic said:
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
That's what I'm thinking and doing now, wish me luck
I've also downloaded xxlsa to have 4.1.2 .. according to online tutorials I should flash cf-root via odin, then flash the rom via CWM .. any thoughts?
[Update - 1] phone is ok, re-flashed the stock firmware via PC Odin and it is working now, no problem! tried flashing cf-root, got stuck at the yellow triangle screen and nothing happens ... so I reflashed the stock rom again.
will try now to flash cf-root then boot into recovery, i just might be lucky
[Update - 2] upgraded to JB 4.1.2 successfully and rooted!
So which kernel are you using? and which Jelly bean?

Stuck on recovery

I am new to this phone.I was running stock 2'3'6 and rooted through semophore.I flashed a jb rom with fullwipe,but stuck on samsung screen.restore from nandroid back also not working.as some one said in this forum,I downloaded and copied mackay kernal to ext sdcard.now sdcard wont recognize by recovery.now I am stuck on recoveryany gurus can help me....
Sent from my SCH-I535 using xda app-developers app.
AW: Stuck on recovery
Can you get into download mode? If yes try flashing stock firmware via odin again and then flash the cf root kernel.
Sent from my GT-I9000 using xda app-developers app
Flash Devil Kernel (the .tar file) in Download Mode via Odin and then when you see on the phone the Devil Logo, pull out the battery, place it back in and boot into recovery using the 3 button combo then you can wipe everything again and flash the rom you want from external sdcard or internal and the bootloop will be fixed
Sent from my GT-I9000 using Tapatalk 2

Samsung Galaxy Note Stuck on Splash Image/Boot Image

My mom's Samsung Galaxy Note is currently stuck on the Samsung Galaxy Note GT-N7000 screen. Tried removing the battery and reinsert then turned it on same problem.
Also I am unable to access the recovery I remembered that I have philz kernel installed on the unit. And im only able to access the download mode.
Also when I flashed the stock roms that I have stored on my computer specifically GB roms it shows that it was successful but when the phone rebooted it is still stuck on the same screen. Not willing to do any more steps as im really out of ideas here. Hope you can help.
BTW my mom is only using the phone for standard use meaning call and text and a few game words like crossword and some solitaire games. And sh said that the phone just turned off then thinking it was due to low battery she charged it then when the battery shows 100% full she disconnected the phone and tried to turn it on that is when the problem occured.
Here is the screenshot of odin. And im a bit concerned about the line where it says "RQT_CLOSE!!!" I don't know what that means.
http://imageshack.us/photo/my-images/707/24063870.jpg
Some more useful information, the phone was on Jelly Bean Stocked Jelly Bean with custom kernel I forgot if it was Philz or speedmod. Phone is already out of its warranty.
Stuck on the Gt-N7000 screen? It doesn't go into bootloop when you flash the stock GB ROM ? Can you access the stock Android recovery? Remove battery, put it in and then try to access the recovery using the same the button combo used for custom recoveries.
The Odin flash went perfectly, nothing wrong with it.
Friend of mine is having the same issue, flashing to stock UK Jellybean.
Same issue
I'm actually having the same issue as the OP I'm bookmarking this as I am looking for a fix I flashed the Vodafone rom for the united kingdom and am now stuck on the bootscreen for all samsung devices.
Try booting into recovery and reinstalling one of your backups if you can - usually works for me. Clean all caches etc first though.
PC Odin may take a couple of attempts to flash it correctly I've found when I'm trying to repair a major stuff up.
Galaxy Note N7000: JonRom UBLSF V1 + SpeedMod k5-5 + XXLSO on Telstra
Not working even though flashing stock gb/ics/jb and custom kernels and unable to access recovery only downliad mode. Was trying to use the pif file is it safe I mean it was said to use it as the last option.
Sent from my Titan TV S320 using xda premium
cryostasis25 said:
Not working even though flashing stock gb/ics/jb and custom kernels and unable to access recovery only downliad mode. Was trying to use the pif file is it safe I mean it was said to use it as the last option.
Sent from my Titan TV S320 using xda premium
Click to expand...
Click to collapse
You may, but follow the given instructions very carefully. Yes, it is a last option.
Will do the pit procedure. Thanks. Will post back and update you guys on the redults
Sent from my Titan TV S320 using xda premium
Have you tried flashing a kernel through Odin PC and then booting into recovery use one of philz .tar files for the kernel and see if you can get in to recovery sounds like you have lost recovery. This has happened to me and I fixed with philz kernel through PC Odin good luck and also you may need to do a full wipe after flashing a ROM through PC Odin to get it to boot
sent from the darkness
Yup already performed that but stuck on logo snd cant access cwm recovery.
Got mine fixed by doing this procedure which is really weird. Flashed pit with stock gb rom then once finished im still stuck in splash screen decided to flashed ics with pit same results then i flashed jb rom using pc odin with pit after a few minutes i was able to access the menus and all those icons. But the apps and games installed are still on the device which should have been removed when i flashed stock rom.
Flashed philz kernel via mobile odin and wiped factory data and it seems device is working now. Still under observation though.
Sent from my Titan TV S320 using xda premium
you are flashing a non wipe rom so the apps will still be there

[Q] GT-N7000 not booting after Upgrading philz_touch_6.07.9-n70

Hi Team XDA,
Few Days Back I have Rooted my Samsung Galaxy GT-N7000. I went to Philz's Custom Recovery and upgraded it to 6.07.9.
Process went on Successfully. But when I Re Booted my phone. I could only see "SAMSUNG GALAXY GT-N7000" Logo followed with Blank/Black screen.
Did I install a Custom recovery which Do not support my phone? Coz I saw last 4 letters of my Kernel name and then downloaded it.
Did my phone went to BootLoop? or i Bricked it.
Please Suggest.
NikhilDj26 said:
Hi Team XDA,
Few Days Back I have Rooted my Samsung Galaxy GT-N7000. I went to Philz's Custom Recovery and upgraded it to 6.07.9.
Process went on Successfully. But when I Re Booted my phone. I could only see "SAMSUNG GALAXY GT-N7000" Logo followed with Blank/Black screen.
Did I install a Custom recovery which Do not support my phone? Coz I saw last 4 letters of my Kernel name and then downloaded it.
Did my phone went to BootLoop? or i Bricked it.
Please Suggest.
Click to expand...
Click to collapse
U need to flash Phiz version 5, using recovery or odin.
Sent from my GT-N7000 using Tapatalk 2
Thankyou for ur guidence.
forest1971 said:
U need to flash Phiz version 5, using recovery or odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thankyou
NikhilDj26 said:
Thankyou
Click to expand...
Click to collapse
i suck on samsung logo too.how to flash philz with odin
simke MD said:
i suck on samsung logo too.how to flash philz with odin
Click to expand...
Click to collapse
1. Start your phone in 'Download' Mode.
2. Download ODIN and run it on u'r PC
3. Connect your phone to PC with USB. (you should see port and Color change on ODIN application.
4. AutoBoot and Reset time checkbox should be check.
5. Set PDA path to the Philz recovery file on your PC.
6. Click on Start.
i do just like you say,but i have FAIL message on odin.
Some other step to do ???
i go with older 5.15 philz touch and i get pass on odin,but still dont have boot.just jellow triangle and samsung logo
simke MD said:
i do just like you say,but i have FAIL message on odin.
Some other step to do ???
i go with older 5.15 philz touch and i get pass on odin,but still dont have boot.just jellow triangle and samsung logo
Click to expand...
Click to collapse
What rom were you on?
I have been on cheese rom.
Try to update super user on not "normal" second option which i can choose.
Then stuck on samsung logo.
Solution for me :
Philz touch 5.15 with odin
And install stock german rom
I just lost phone root
Sent from my GT-N7000 using XDA Premium 4 mobile app

Categories

Resources