Well,
I did update to JB 4,1,2 stock, but before i did a backup of the ICS (stock either) that I was in. Is there anyproblem I use that backup from JB stock rom? I'm using Philz kernel.
provettirodolfo said:
Well,
I did update to JB 4,1,2 stock, but before i did a backup of the ICS (stock either) that I was in. Is there anyproblem I use that backup from JB stock rom? I'm using Philz kernel.
Click to expand...
Click to collapse
yes, that works fine. I restore mine a few days ago...the only different thing that I saw is that if you flashed with Odin PC and got bootloader updated, the CWM will first analize the partition, but then everything was working fine.
Related
Hi People,
I just moved to Note few days back, My phone was on N7000XXKL3 2.3.6 FW,
I rooted the phone as i wanted to try ICS Stunner rom.
Installed Abyss Kernel, made a image backup of my stock rom thru recovery, Flashed Stunner rom. all fine
Now i want to go back to Stock GB rom, I tried restoring my stock backup, after the restore the phone gets stuck in while trying to reboot.
PLs help me here, what needs to be done to go back to my stock GB.
might wanna post in the correct selection!
You need to post in q and a
Sent from my GT-N7000 using xda premium
Horoscope said:
PLs help me here, what needs to be done to go back to my stock GB.
Click to expand...
Click to collapse
Use desktop Odin to falsh stock ROM.
Reported. Please post in correct section.
Also what he said. PC Odin, back to your stock firmware.
very sorry for creating a therad in wrong section... pls move it
Horoscope said:
Hi People,
I just moved to Note few days back, My phone was on N7000XXKL3 2.3.6 FW,
I rooted the phone as i wanted to try ICS Stunner rom.
Installed Abyss Kernel, made a image backup of my stock rom thru recovery, Flashed Stunner rom. all fine
Now i want to go back to Stock GB rom, I tried restoring my stock backup, after the restore the phone gets stuck in while trying to reboot.
PLs help me here, what needs to be done to go back to my stock GB.
Click to expand...
Click to collapse
Use PC Odin
Sent from my GT-N7000 using xda premium
Moved To Q&A
Please do not post questions in the development section
try restoring after wiping data, it should work.
Otherwise, just download the latest stock ROM relevant to your country and flash it using PC Odin.
Horoscope said:
Hi People,
I just moved to Note few days back, My phone was on N7000XXKL3 2.3.6 FW,
I rooted the phone as i wanted to try ICS Stunner rom.
Installed Abyss Kernel, made a image backup of my stock rom thru recovery, Flashed Stunner rom. all fine
Now i want to go back to Stock GB rom, I tried restoring my stock backup, after the restore the phone gets stuck in while trying to reboot.
PLs help me here, what needs to be done to go back to my stock GB.
Click to expand...
Click to collapse
Here are the detailed steps!!-
http://forum.xda-developers.com/showpost.php?p=24535533&postcount=2
Hit thanks if it helped!
For me, I flashed Abyssnote kernel, rebooted recovery, then used that kernel's Redpill recovery to restore. CWM can't restore it.
Rooted today. Clean install, flashed Slim ICS 4.2 and semaphore 1.30s kernel. Booted up and I have no signal, tried different radio and same story. Is it broken? Bricked?
lvnatic said:
Rooted today. Clean install, flashed Slim ICS 4.2 and semaphore 1.30s kernel. Booted up and I have no signal, tried different radio and same story. Is it broken? Bricked?
Click to expand...
Click to collapse
Try different version of Semaphore kernel. Semaphore 2.0.6 is out. It is definitely not bricked...If problem exist go back to JVU through Odin and flash the rom again....
when flashing some JB roms imei getting lost, try backing up the efs folder or if you have it backed up restore it with root explorer or other similar app.
Hi all, so I'm currently looking for a way to go back to stock Touchwiz (4.0.3) from CM10.
I'm currently running CM10 and i do have a Nandroid backup from when I was on Touchwiz (and running PhilZ safe kernel), but the thing is I've been running CM10 for a few months and have a lot of new data stored on my phone.
So instead of backing up anything new and just restoring my backup, could i just flash a stock firmware through ODIN or CWM on top of CM10? Or if I tried that would I have to wipe anyway?
Thanks any help appreciated.
going back from custom to stock causes boot loops and a wipe will be necessary. so better do a nandroid backup of th current rom, then when in stock rom, use tb to restore data using the nandroid backup.
Sent from my GT-N7000 using xda premium
Ok this thread is dead but I will have to revive it now because I wanna do the same thing.
I have been on Cm10 and wanted to go to Alliance ROM today. So like a complete idiot I flashed pre-rooted KJ1 gingerbread ROM from Dr.Ketan over my CM10 and got stuck in a boot loop. Luckily had a nandroid backup and now restoring as I type.
What is the correct process to go from CM to stock GB or ICS?
Any and all help is appreciated
Thanks in advance.
Cheers,
Kaushik
EDIT: I flashed the pre-rooted GB ROM because I wanted to do a full wipe and then flash over to stock ICS and then to Alliance JB ROM.
What is the correct process to go from CM to stock GB or ICS?
Click to expand...
Click to collapse
Either flash using PC odin. after flashing if on GB, boot into recovery and do a factory reset. If on ICS, install a safe kernel (eg,Philz) and reboot recovery and do a factory reset,
OR
Flash a custom GB or ICS rom using recovery after all wipes and formats (system, data, cache)
I'm currently running a rooted stock ICS w/Chainfire kernel.
I'm going to try one of the leaked JB (LSA to be exact) along with the associated Philz kernel.
My only concern is that if I don't like or have too many problems with JB and I want to go back and restore my ICS nanadroid backup.
Question: IF I do need/want to restore my ICS backup from JB, would I run the restore from Philz kernel or reload back Chainfire kernel and then do restore?
Thanks
Restore from philz kernel will do the job
jeffs99 said:
I'm currently running a rooted stock ICS w/Chainfire kernel.
I'm going to try one of the leaked JB (LSA to be exact) along with the associated Philz kernel.
My only concern is that if I don't like or have too many problems with JB and I want to go back and restore my ICS nanadroid backup.
Question: IF I do need/want to restore my ICS backup from JB, would I run the restore from Philz kernel or reload back Chainfire kernel and then do restore?
Thanks
Click to expand...
Click to collapse
Restoring my CWM recovery will do..its just like restoring a Restore Point in PC (here even the data will be restored)..
jeffs99 said:
I'm currently running a rooted stock ICS w/Chainfire kernel.
I'm going to try one of the leaked JB (LSA to be exact) along with the associated Philz kernel.
My only concern is that if I don't like or have too many problems with JB and I want to go back and restore my ICS nanadroid backup.
Question: IF I do need/want to restore my ICS backup from JB, would I run the restore from Philz kernel or reload back Chainfire kernel and then do restore?
Thanks
Click to expand...
Click to collapse
PhilZ Kernel....
Hi
I want to return my Note to stock. When I first bought it I rooted it and made a nandroid of the stock ICS rom that was on it.
Since then I have installed Alliance Rom on Jellybean. Can I just restore the stock ICS nandroid straight over the JB rom or will this brick my phone? I've read that there's something about ICS stock kernels that can cause bricks so I'm a bit nervous about how to go about it.
I have already downloaded the two files from the unroot thread to remove superuser and binaries, do I just flash these after restoring the ICS nandroid? Also, how do I get back the stock recovery?
Sorry for such basic questions but I'm new to the Note and it's a bit different to flashing things on the One X which I came from.
Thanks x
yes.. you can restore the stock rom nandroid.. but i am not sure as Alliance JB LSZ use TWRP recovery and the backup you made may be using CWM.. so its better to install a CWM kernel on the rom... Like philz and then restore the rom,, for stock recovery you will need to install stock kernel..
but why go into so much trouble ... just install a stock ICS rom using pc odin.. (no wipes after installing stock ICS rom).. make all the wipes while on a safe kernel
nokiamodeln91 said:
yes.. you can restore the stock rom nandroid.. but i am not sure as Alliance JB LSZ use TWRP recovery and the backup you made may be using CWM.. so its better to install a CWM kernel on the rom... Like philz and then restore the rom,, for stock recovery you will need to install stock kernel..
but why go into so much trouble ... just install a stock ICS rom using pc odin.. (no wipes after installing stock ICS rom).. make all the wipes while on a safe kernel
Click to expand...
Click to collapse
Thank you very much for explaining, that's a big help
The Odin way does sound a bit easier, I'll look into it. Thanks for explaining about the ICS wiping problem.
Much appreciated