[Q] My galaxy note has no CSC after JB upgrade (Solved) - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I've instaled the german Jelly Bean official Room and now my phone has no CSC. I've tried the *#272*imei# and also the Samsung Galaxy S / S2 / S3 CSC app but neither worked! Also tried data wipe, cleaned cache and SD and factory reset and nothing works.
My IMEI shows with a / 01 at the end when I do the *#6#, don't know if that makes any difference
This is what it is showing me
PDA: N7000XXLSZ
PHONE: N7000XXLSO
CSC: unknown
Build info: thu Feb 14 01:51:54 KST 2013
Cant find any other way to fix this, please help.

if you have the stock rom downloaded on PC.. then open it using 7z and you will see a cache.img file. copy to phone and use mobile odin to flash it in the cache tab... this will reset the phone so.. make sure you are on a safe kernel and rooted

after imei /01 is normal !
if ur phone is root just go to system look for SW_Configuration.xml
if don't have then probably u're not getting any csc info for sure!
if u're on custom rom shld be ok for that u can ignore it not a issue!
flash to a official rom u'll get it back!
or just get any SW_Configuration.xml edit by ur self throw it in the system folder !
OMG just a name of CSC versions is that so important if u r on a custom rom? fainted !
not sure what is ur case try it n do it at ur own risk !

Like I said it is official Rom. Also the phone is not root.
Actually found it somewhere else, I flashed with odin again with the full rom but only put it on CSC left other options empty and it worked.
Thanks for the replies.

Related

[Q] Back to 2.2.1 Stock, please help me!

Hello everyone! I Hope someone can help me. I need to send my phone to service because the 3.5 mm plug is broken.
I need to get it back to stock. I have used a custom rom from romkitchen, and now i have no idea of what i've done. Sorry, but i am a noob and my english sucks!
I downloaded/tried XWJS3, XWJS5 from here and i used Odin to do it:
http://forum.xda-developers.com/showthread.php?t=771111
When this was finished, a white ring came up on top of the screen, and i cant get any signal. Now i dont know what to do!
Can someone please help me here? Now my phone says:
FW version: 2.2.1
Baseband v: I9000XXJPY
Kernel v: 2.6.32.9 [email protected]#1
Build number: FROYO.XWJS5
no signal ,,ur imei is changed thts y ur phone is not getting registerd with ur operator.so its like a big prblm cause i too faced this prblm screwd my imei and product code and dint kno what happnd,but i had a backup of efs ...do u hav a backup of efs.....else u need to send it to samsung center....
no my imei has not changed. just checked the box and imei info on the phone... ? it is the same!
flash it with pit 512 stock rom and see if it works...always hav a efs folder backup if ur rooted.
what is efs?
its a folder were ur pcode,imei and important details of ur phone is stored.there r lot of topics here on tht so alwayz read some b4 u flash ,,check ur product code too,,do a factory reset and flash fresh stock rom..
The white circle is still there! Is there any way to fix this? By rooting it again or something? Please help!
If you want to go back to a stock rom (without root i suppose) you will need to update your device with kies. But because you don't have a kies installed ROM, you won't be able to update with kies.
You will have to spoof the ROM version. Try following this post:
http://forum.xda-developers.com/showthread.php?t=959806
Let me know if you have any problems.

[Q] hii guys pls help

hi guys pls help me i tried surf the net with no help
i have a Samsung galaxy s i9000 i rooted to 2.3.3 but
today i flash my phone back to singtel firmware JG4 and i plug my device to kie
it came out this error hw do i change my CSC back to singtel?
Uploaded with ImageShack.us
pls help thanks
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
diiiooon1989 said:
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
Click to expand...
Click to collapse
hi thanks for the reply but is this work for all country phone? cus mine is singapore
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
diiiooon1989 said:
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
Click to expand...
Click to collapse
hi bro i tried finding but with no luk
do u mind guide me with this
how to get xwjs3 with the boot loaders.>??
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
diiiooon1989 said:
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
Click to expand...
Click to collapse
hi bro thanks for the guide
but nw i have this issues
Uploaded with ImageShack.us
the reason i wanna flash back cus my phome home button not response-ing
): and my camera Len crack
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
JJEgan said:
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Click to expand...
Click to collapse
hi thanks for the guide but nw my phone hang at Galaxy S
GT-i9000
Samsung
logo Screen >.< and plus my Home button not working anymore
even i try up + power + home button to recovery mode
or down+ power + home button mode
also not working >.>"
myrddral said:
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
Click to expand...
Click to collapse
hi thanks for the guide but i think my phone is dead >.>
Possible fix flash stock 2.1 rom with repartition checked and pit 512 not a 2.3.3 rom
Via Odin .
jje
Sunday i send my phone to causeway point to repair my camera lens and button.. today they send my phone to my house Thumb up... i notice they change all the button, lens and the whole back case and i notice my firmware is i9000DXJPB is it the latest firmware?

darkys rom and market

hi i was searching for a good rom, i was in darkys 9.5 and moved to darkys 10.2 ExEd
i did it throught odin..
the rom is super fast and super nice ! BUT... (((
market is not working ! when i try to download a app it saws tha it is downloading but it isnt and after 10 minutes give me a error.
Sometimes after a lot of reboot works once maybe two but then tha same again !
i didnt have this problem in 9.5.
Does anyone had this problem ? any opinion or suggestions ? i'v tied throught sgs wipe market cache, reinstall market 3.15 nothing
i would be gratuful for any help..
i hope i open the thread in the correct place this time..
anyone..
Have you checked your csc code?
The problem is propably in csc code.
Wysłano z GT-I9000 z użyciem Tapatalk
thanks for the replay ! could you give m a direction csc code ? where can i see it ?
if this tha problem how can i fix it any link or help would be great ! ty!!!
i use wifi ! browser and any other app how use internet works fine..
i can do it throught odin.. i just add csc ? and all the other tha same..
where can i get the correct file(im from greece) ??
well i used *#272*IMEI# and saw that it is KOR
does this mean korean....
how can change it ot a greek one...?
Yes it means Korean, change it to greece by looking here
the only option give me is XEU CPW XEO KOR DBT not BY(greece)
should i flash the phone again throught odin with the same tar and pid of darkys and aldo add new csc ? should i ad modem too ?
i found in this link : http://forum.xda-developers.com/showthread.php?t=846913
a csc eur. 2.3.4 if i use this is it going to work ok or am i going to burn my love one galaxy
I dont suggest odin for this, what you can do is find the csc folder from another rom, then open up the .zip you used from darky 10.2 EE, find the csc folder open it, if the other 3 letter code folders are there, paste you folder there. Then flash the rom like you did last time. Then use the *#272* code and change it. This will factory reset your phone
The csc is a 3-letter code, you need to scroll down in the link i gave you above, also you can use this which maybe clearer
thanks tallon for your suggestion but the rom im using in 10.2 resurr. and it is in pda form.
i dont mind doing a new flash with odin but i dont know if i use a csc file in odin with the pda.tar and .pit and no modem would be ok or bye bye my galaxy..
and i dont know where the H#$% could i find the right csc i think i did but i didn't
oooffoouuu..
Download csc from here
10.2 EE Its the same as 10.2 RE but CWM or darky app flashable... If your not sure where to put the csc files, or which to put lemme know
thansk man ! your life saving !
i've just flashe 2.3.4 of. throught odin,market is not working either !! ((
i'll flash once again 10.res. darkys.
i donwloaded the correct csc but where should i put it..?
have you done this before ? ttttthhhannkkkssss !!!
I have played around with the csc files before flashing the Darkyrom 10.2.2 Final which is a zip, but this was to ensure that the default was set to my csc rather then what they had already set it to.
Anyway, when you open the .zip go to system>>csc this is where all the csc files are stored, simply put your folder in here. Make sure it has a the same format as the inside of the other folders....
In addition to the above if you want it to be the default so you don't have to type in the code to change it, copy and replace the identically named files that are currently outside of the 3-letter code folders.. (contents.db, customer.xml, feature.xml, others.xml, sales_code.dat)
done with csc ! i used an install.zip in the recovery mode,change it to eur.
greek is working great in phone BUT market is not working ..!! it seems that wasn't the problem.. d%#$%$ oofoouuu... what else .. (((
After alll thatt.... argg
You checked the csc with the code.....?
Reflash everything to stock, and delete everything, im not sure anymore im tired. Ill let you know if i think of anything, but usually that or wiping the market cache works.
So again whilst your on a roll you may as well flash stock, and make sure to wipe in internal sd, cache, and dalvik cache, and factory reset.
Dont forget that wiping the dalvik will cause your phone to take approx. 10 mins to boot, maybe more..
You imei is fine right? Same as original...

[Q] Missing CSC after JB update

Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
n2851991m said:
Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
Click to expand...
Click to collapse
power off your device..
press volume up + home + power buttons at the same time..
you will boot to recovery mode..
use volume keys to navigate to wipe cache and restore factory data..
select yes by using power button..
phone will reboot and will take a while..
set up the phone again..
see if its successful..
That Does not work
jaycm1130 said:
power off your device..
press volume up + home + power buttons at the same time..
you will boot to recovery mode..
use volume keys to navigate to wipe cache and restore factory data..
select yes by using power button..
phone will reboot and will take a while..
set up the phone again..
see if its successful..
Click to expand...
Click to collapse
Thanks for your reply but I have searched this forum and tried almost all solutions here. I have tried this but it did not work.. Ill try again just in case but for now this does not work
n2851991m said:
Thanks for your reply but I have searched this forum and tried almost all solutions here. I have tried this but it did not work.. Ill try again just in case but for now this does not work
Click to expand...
Click to collapse
you may try to reinstall the firmware via odin..
try to reset via recovery before and after the flashing process just to make sure..
n2851991m said:
Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
Click to expand...
Click to collapse
me too having same problem.. dont know why..
but it does not causing any problem...
may be its because fw is not from our region..
Edit : in root file explorer in a file called CSCversion.txt it is written 9070SERLPY
ravijani said:
me too having same problem.. dont know why..
but it does not causing any problem...
may be its because fw is not from our region..
Edit : in root file explorer in a file called CSCversion.txt it is written 9070SERLPY
Click to expand...
Click to collapse
noop i am from india and my CSC is ok see image
singhdharmendra48 said:
noop i am from india and my CSC is ok see image
Click to expand...
Click to collapse
Can you send me the link from where you downloaded the XXLQB rom ?? ( SamFirmware roms dont have a seperate CSC)
and also can you please confirm if 3G is working ??
n2851991m said:
Can you send me the link from where you downloaded the XXLQB rom ?? ( SamFirmware roms dont have a seperate CSC)
and also can you please confirm if 3G is working ??
Click to expand...
Click to collapse
this link to download http://d-h.st/36o
and 3G working for me bcoz mostly my friends connect to me video call:good:

[Q] Note and csc

Hi,
After having changed usb port at the service, they also reload firmware to my note device. When I came home, noticed that Kies does not
recognize the firmware loaded by service.
The details from *#1234# are:
PDA: N7000XXLSZ
PHONE: N7000XXLSO
CSC: N7000OJVLSB
Build info: Thu Feb 14:01:51 KST 2013
From Settings --> about
Android version: 4.1.2
Kernel version 3.0.31-906407
Beaseband: N7000XXLSO
Build number: JZ054K.N7000XXLSZ
I dont remeber the previous frimware details, but it was recognized by Kies and I was able to upgrade if a new frimware arrived.
Further search leaded to incorret CSC and solution given was to type :
*#272*IEMI# and change CSC code for Turkey.
Did not use the last 2 digit which is / 01
But got error msg saying "Unkown application"
How to proceed from this point on ?
How can I change the CSC ?
Does 4.1.2 not allow CSC change ?
try this
and be ready for a wipe.
Thanks for the info, the problem is that, I dont want my phone as rooted. There must be a way withhout root authority.
Why *#272*iemi# does not work in my case ? I'm sure my iemi is correct and not entered the last 2 digit / 01 .
That code doesnot work since JB.
nokiamodeln91 said:
That code doesnot work since JB.
Click to expand...
Click to collapse
Hımm,
What about using Odin 3.07 and downloading Firmware : N7000XXLSZ CSC : N7000OJVLSB from sammobile.com ?
This will be my first use of Odin, and appyling firmware with it. Is it risky ? Does it cause any counter increase in Node ? ( for serviceability )
That should work.. Try flashing the stock firmware under csc tab. If that does not work then try the normal way..
Flashing stock doesnot increase counter..
nokiamodeln91 said:
That should work.. Try flashing the stock firmware under csc tab. If that does not work then try the normal way..
Flashing stock doesnot increase counter..
Click to expand...
Click to collapse
Any recomended settings for ODIN ? Since there is already stock firmware on the phone, do I need a wipe for cache and data ?
nb. It will be the first time with Odin, soory about the questions.
Just leave everything default.. No need to wipe.
nokiamodeln91 said:
Just leave everything default.. No need to wipe.
Click to expand...
Click to collapse
Going crazy ))
Downloaded Odin and proper stock code from sammobile.com for my country.
Used Odin to upload my phone with the ( so caled) new code. ( selected PDA for all code ) Everything went poperly. The code updated with success ...
I notice, you said only CSC but I've chosen PDA for all code to be updated. Did not dare to check only CSC, sorry.
Phone rebooted, and I was expecting the problem to be solved.
But:
Kies still says : Your devices current firmwre version is not supported to update firmware via Kies....
Another interesting thing is that, all the applications are there . I thought it should be a clean start w/o any addtl appl. intstalled by me.
Can this be the clue ?
I'm stuck ..
What am I doing wrong ?
Flashing a JB rom will not wipe anything. It will retain your apps and data.
Check if the csc has changed or not. If not, then it's best to root and use csc changer. Then you can flash the rom again like you did to remove root.
nokiamodeln91 said:
Flashing a JB rom will not wipe anything. It will retain your apps and data.
Check if the csc has changed or not. If not, then it's best to root and use csc changer. Then you can flash the rom again like you did to remove root.
Click to expand...
Click to collapse
The problem with root is, my note is still under warranty, at least for one more year. I also found Framaroot but it also violates warranty.
I think, the best way is to revisit the service dept of Samsung and ask them to reload the proper stock rom .
I didnt want to revisit service, since it takes too much time to get the phone back from them
JB does not support *#272*iemi#
The rom I found from sammobile.com for my country somehow not the proper one. pda: xxlsz phone: xxlso csc: JVLSB
Couldnt found what LSB stands for anywhere.
Looking stock rom for Turkey.
So, behave as a nice customer and visit the service dept Pitty ...

Categories

Resources