This post will show you how to root your Samsung galaxy ace 2.3.3 or 2.3.x in a simple way.
its similar to what's said over here - http://forum.xda-developers.com/showthread.php?t=1034145
i found it extremely hard to actually download the root file because websites like hot file were full of adverts and fake links, so I've made it much easier - http://www.yourfilelink.com/get.php?fid=832963
Rooting for 2.3.3 (Thanks to Russian forum-user with nickname may213) (if it doesn't work try D method):
Download attached file called upd_1.zip and copy it to your sdcard
Turn off your phone
Press POWER+HOME BUTTON
Select update from sdcard, select the file upd_1.zip
After the update completed - reboot
Now you have rooted S5830
Aren't there numerous tutorials already?
Sent from my pet - Megatron™
help!!
android-forever1 said:
This post will show you how to root your Samsung galaxy ace 2.3.3 or 2.3.x in a simple way.
its similar to what's said over here - http://forum.xda-developers.com/showthread.php?t=1034145
i found it extremely hard to actually download the root file because websites like hot file were full of adverts and fake links, so I've made it much easier - http://www.yourfilelink.com/get.php?fid=832963
Rooting for 2.3.3 (Thanks to Russian forum-user with nickname may213) (if it doesn't work try D method):
Download attached file called upd_1.zip and copy it to your sdcard
Turn off your phone
Press POWER+HOME BUTTON
Select update from sdcard, select the file upd_1.zip
After the update completed - reboot
Now you have rooted S5830
Click to expand...
Click to collapse
I have a galaxy ace 5830m and the root file and update file will not run....says installation aborted error code 7. any ideas?
android 2.3.6
successfully root for my 5830!
thank you...
:laugh:
That was really easy, thanks!
I made a video tutorial with step by step instructions on how to root Samsung Galaxy Ace based on your article, if you don't mind. This might help people who are not familiar with rooting process.
Here the video youtu.be/jIK7pAu4ddE (sorry, I can't post links yet)
android-forever1 said:
This post will show you how to root your Samsung galaxy ace 2.3.3 or 2.3.x in a simple way.
its similar to what's said over here - http://forum.xda-developers.com/showthread.php?t=1034145
i found it extremely hard to actually download the root file because websites like hot file were full of adverts and fake links, so I've made it much easier - http://www.yourfilelink.com/get.php?fid=832963
Rooting for 2.3.3 (Thanks to Russian forum-user with nickname may213) (if it doesn't work try D method):
Download attached file called upd_1.zip and copy it to your sdcard
Turn off your phone
Press POWER+HOME BUTTON
Select update from sdcard, select the file upd_1.zip
After the update completed - reboot
Now you have rooted S5830
Click to expand...
Click to collapse
Is it actually that easy.........
usbmonster22673 said:
Is it actually that easy.........
Click to expand...
Click to collapse
Yes, if you follow video instruction youtu.be/jIK7pAu4ddE
Help me plz
android-forever1 said:
This post will show you how to root your Samsung galaxy ace 2.3.3 or 2.3.x in a simple way.
its similar to what's said over here - http://forum.xda-developers.com/showthread.php?t=1034145
i found it extremely hard to actually download the root file because websites like hot file were full of adverts and fake links, so I've made it much easier - http://www.yourfilelink.com/get.php?fid=832963
Rooting for 2.3.3 (Thanks to Russian forum-user with nickname may213) (if it doesn't work try D method):
Download attached file called upd_1.zip and copy it to your sdcard
Turn off your phone
Press POWER+HOME BUTTON
Select update from sdcard, select the file upd_1.zip
After the update completed - reboot
Now you have rooted S5830
Click to expand...
Click to collapse
I tried exactly the same procedure a number of times like apply update from sd card, choosing the file, and rebooting the system. It seemed that it did it correctly as it did not give any notification of failure but when I tried to uninstall some apps using root explorer, it says the device has not been rooted and prompt me to root again. Tired of doing several times. I need to delete those unwanted factory set apps. Help plz
bhola12 said:
I tried exactly the same procedure a number of times like apply update from sd card, choosing the file, and rebooting the system. It seemed that it did it correctly as it did not give any notification of failure but when I tried to uninstall some apps using root explorer, it says the device has not been rooted and prompt me to root again. Tired of doing several times. I need to delete those unwanted factory set apps. Help plz
Click to expand...
Click to collapse
Read it please http://forum.xda-developers.com/showthread.php?t=2294713
It'll be very useful for you
A mate asked for a similar problem
pga1 said:
I have a galaxy ace 5830m and the root file and update file will not run....says installation aborted error code 7. any ideas?
android 2.3.6
Click to expand...
Click to collapse
Enable "USB debug mode" for the rooting to work.
:laugh::good: worked a treat ....thank u.
lubba1974 said:
:laugh::good: worked a treat ....thank u.
Click to expand...
Click to collapse
Thanks, works perfect on my uncle phone...
yaykz. it works. i have rooted my fone. the question is. what to do now? how to get the benefits of my phone (samsung galaxy ace s5830)
crayzajhie said:
yaykz. it works. i have rooted my fone. the question is. what to do now? how to get the benefits of my phone (samsung galaxy ace s5830)
Click to expand...
Click to collapse
Install cwm and then you cab try out some roms. There are several theards about it.
Gesendet von meinem GT-S5830 mit Tapatalk 2
Not working for me
shikhar623 said:
Enable "USB debug mode" for the rooting to work.
Click to expand...
Click to collapse
I have the same problem. "USB debug mode" is on but still showing the error 7 saying problem with the zip file. any idea ?
Thanks
pga1 said:
I have a galaxy ace 5830m and the root file and update file will not run....says installation aborted error code 7. any ideas?
android 2.3.6
Click to expand...
Click to collapse
mmrbappy said:
I have the same problem. "USB debug mode" is on but still showing the error 7 saying problem with the zip file. any idea ?
Thanks
Click to expand...
Click to collapse
as the Thread heading says you should be on 2.3.3 for it to work. Are you??
pls confirm.
shikhar623 said:
as the Thread heading says you should be on 2.3.3 for it to work. Are you??
pls confirm.
Click to expand...
Click to collapse
My one is 2.3.6
Thanks
mmrbappy said:
I have the same problem. "USB debug mode" is on but still showing the error 7 saying problem with the zip file. any idea ?
Thanks
Click to expand...
Click to collapse
Have you got CWM installed?
Sent from TheXDApp
shikhar623 said:
Have you got CWM installed?
Sent from TheXDApp
Click to expand...
Click to collapse
no
mmrbappy said:
no
Click to expand...
Click to collapse
What's the state of ur phone? Unrooted and Stock? Right?
Sent from TheXDApp
Related
Hi there,
i was trying to flash my samsung galaxy s and put darky's on it but for some reason i can't.
The recovery screen that pops op says recovery 3e (and every tutorial i found said 2e),
i try to "apply sdcard:update.zip
(i downloaded the update file from the darky roms thread)
and i get the error: failed to verify whole-file signature
signature verification failed, installation aborted.
i've got a samsung galaxy I9000XWJPA.
I've flashed the phone using z4root.
Then i've checked with terminal emulator that it's rooted.
I think that there's a problem with clockwork, or that i just didn't install that correctly, so i'm kinda stuck at the moment :s
could someone please help me?
First of all you should get the busybox file and flash it. Then copy the update.zip into the internal sd card and copy the darky rom too.
Before doing this i would restore it to factory settings. Dont root it with z4root, the busybox roots it and it allows you to open the update.zip
Try what i said and it should work.
Sent from my GT-I9000 using Tapatalk
You are on Android 2.2 which has the 3e recovery. 3e recovery doesn't allow using unsigned .zip files. You should first downgrade your recovery to 2e by flashing CF-root. After you downgrade your recovery, you'll be able to use any update.zip file.
You can find CF-root in this link:
http://forum.xda-developers.com/showthread.php?t=788108
Since you have XWJPA, you should download the JPA version from the second post. Instructions are in the first post.
Make sure you have 3-button recovery and download modes working before flashing.
oh that's via odin3 right?
i'll try that, thanks
Tell us if there's any problem.
Sent from my GT-I9000 using Tapatalk
hmm, i've followed all the steps, downloaded odin, and the CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.tar file, but the download screen only says "downloading, do not turn off target!!!
is there any particular setting or where to place the .tar file?
mavu said:
hmm, i've followed all the steps, downloaded odin, and the CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.tar file, but the download screen only says "downloading, do not turn off target!!!
is there any particular setting or where to place the .tar file?
Click to expand...
Click to collapse
Ok.
First of all disconnect the galaxy from the pc. Close odin. Open Odin, put in PDA CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.tar
Then shut down the galaxy. Reboot it again to download mode. Connect it via usb and then click start. Make sure re-partition isn't checked.
That's it. When setting up odin you can't have the galaxy connected to he computer. If something fails on download mode, you must always restart the download mode or it'll be stuck.
Good luck
aha, found the problem:
there doesn't appear a comport in odin
new problem, how do i get the phone recognized?
mavu said:
aha, found the problem:
there doesn't appear a comport in odin
new problem, how do i get the phone recognized?
Click to expand...
Click to collapse
It should recognize it when you connect it in download mode...
Mine recognizes it as COM4.
This may be simple, but restart your computer and phone and see if it works.
mavu said:
aha, found the problem:
there doesn't appear a comport in odin
new problem, how do i get the phone recognized?
Click to expand...
Click to collapse
It should recognize it when you connect it in download mode...
Mine recognizes it as COM4.
This may be simple, but restart your computer and phone and see if it works.
If not, re-install the drivers for your phone
hi mate i had exactly the same problems as you and it done my head in for about a day and a half but then someone gave me this advice and it worked a treat,
go to market
download sgs kernel
once done flash speedmod kernel using the app
re start phone
once done download darkys rom
reboot to download mode (should now have 2e)
flash zip
choose zip
find darkys
click yes instal darkys
job done
one thing i must point out in 2e is the back button on your phone is now the select button and the menu button on the bottom left is now your back button
hope this helps as it did for me
Restart your pc and make sure Kies is not working at all.
thanks man! reinstalling the drivers did the trick ten points for coldflid!!!
steve57925 said:
go to market
download sgs kernel
once done flash speedmod kernel using the app
re start phone
once done download darkys rom
reboot to download mode (should now have 2e)
flash zip
choose zip
find darkys
click yes instal darkys
job done
Click to expand...
Click to collapse
For the record, people do NOT have to flash Darkys or any other custom ROM to get 2e. Simply flashing a kernel that has Clockwork Recovery included will do the trick. Your reco to flash SpeedMod would have solved the problem without having to go further.
Very true but he wanted darkys which was the only reason I mentioned but good to point out for others reading the post
Sent from my GT-I9000 using XDA App
mavu said:
thanks man! reinstalling the drivers did the trick ten points for coldflid!!!
Click to expand...
Click to collapse
Im happy ir worked =]
Sent from my GT-I9000 using Tapatalk
steve57925 said:
Very true but he wanted darkys which was the only reason I mentioned but good to point out for others reading the post
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You're 100% correct - my mistake for missing it on the first go-around.
not a problem
Hello ,
I have a similar problem with my Galaxy S I9000 .
I've updated it via KIES to the latest Froyo ( 2.2 as it shows my phone ) .
Next , I tried to install the voodoo lagfix .
I downloaded the .zip file and renamed it to "update.zip" .
Then I copied it to my phone's sd card ( I connect to PC via usb and copied in the 'Phone' folder ) .
Next , I used the 3 buttons ( Volume UP + middle button + turn off button ) and it got into Recovery mode .
I selected the 'update.zip' file and accesed it , but it says :
"E: signature verification failed, installation aborted."
I have to downgrade to 2E first ?
Please help me !!!!
My glxy Tab P1000 work fine !!!
I try to upgrad to 2.3.3 by using firmware P1000JPJPC, using odin 1.7
In the first, i use P1_EUR.pit and i use "Re-Partition" ( the flash process is aborted – fail !!!)
I retry by using "P1_add_hidden.pit and i use "Re-Partition" ( The flash process success – pass) the tab restart in recovery and show error !!! in restart the tab is freeze in glaxy logo !!!!
I try many firmware (differente region and version) an all "PIT" fliles the sam result !!! freeze !!!
I use ROTO-JME for p1000 and the same result !!!!!
I try to remove battry, and not any result !!!
Please help me !!!! i read may tuto in this forum and other and i use many solution, not result !!!!!
For information, the tab is put in download mode !!! (no problem)
HEEEEEEEEEELP !!!
I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE
hope you solve your problem buddy
omr911 said:
I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE
Click to expand...
Click to collapse
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!
Did you wipe all things?
Which errors do you have in recovery mode?
dynamitor said:
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!
Click to expand...
Click to collapse
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time
gtUser1000 said:
Did you wipe all things?
Which errors do you have in recovery mode?
Click to expand...
Click to collapse
after flash firmware P1000JPJPC, thi error
Try installing Overcome ROM. It's one of the best.
Go here and follow the guide http://p1000.teamovercome.net/?page_id=64
The guide is very well done and easy to follow. Just make sure you don't skip anything. All the needed files are there.
Good luck and keep us posted how it went.
Sent from my GT-P1000 using XDA Premium App
did you edit a file or the zipfile?
May you have damaged the zip or the config file, it looks like it isnt linux conform anymore.
if you didnt change anything you should try to redownload it or use a rom like the overcome ones.
May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps
omr911 said:
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time
Click to expand...
Click to collapse
I wait, wait and ait few hors !!! teh same problem !! freeze !!!
Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck
ayong chia said:
May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps
Click to expand...
Click to collapse
I start from a Froyo, and i folow tuto from overcom step by step, the problem, is after restart !!! after download and flash "001001-GB-Stock-Safe-v5.zip" with "gt-p1000_mr.pit", the tabs show error in picture 01, no the same error show in tutorial from overcom !!!!
In overcom tuto, the install update is successfully !!! in my tab, the istall updte is aborted !!!! show the picture !!!!
After, the tab freeze in galxy tab logo !!!!!
tupo05 said:
Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck
Click to expand...
Click to collapse
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!
dynamitor said:
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!
Click to expand...
Click to collapse
Hummm That's weird man. Are you sure you are following all the steps in the tuto ? Including the part about bootloader and some possible patch ? Because that could be the problem you are having. Just read the guide carefully please and try again.
thanks for your help my friends, i finaly repir my galaxy tab !!!
the solution :
i flash my tab with this firmware "P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5" and "gt-p1000_mr.pit"
aftern no error in recovery !!! and the tab start normaly !!! and after i try to reflash my phone with "001001-GB-Stock-Safe-v5.zip" for teste only !!! after no errore in recovery !!! I noticed the first firwmare are repair my tab !!!!
i find this stock firm in this thread :
http://forum.xda-developers.com/showthread.php?p=18410689
and link for this firmare is :
http://www.multiupload.com/IVKH1NMW7C
and I hope that my experiences and your posts will help others!
Glad to hear that you are up and running dude.
Sent from my GT-P1000 using XDA Premium App
Hello..
I have samsung galaxy min/pop plus S5570i...
i am not able to root my device i tried all possible ways can any one plz help to root it
thanks in advance
Try SuperOneClick
go to this post methods are explained
http://forum.xda-developers.com/showpost.php?p=20253964&postcount=6
kmamidal said:
Hello..
I have samsung galaxy min/pop plus S5570i...
i am not able to root my device i tried all possible ways can any one plz help to root it
thanks in advance
Click to expand...
Click to collapse
u can try this program: Unlock Root (search with google the site)
than give a look to the guide
Use SuperOneClick method, its quite easy
Download 2.2
http://forum.xda-developers.com/showthread.php?t=803682
1. Put this file on your phone SDCARD:update.zip
2. Reboot your phone into recover by pressing VOLUME UP+HOME+POWER.
3. Choose "Install from sdcard"
4. Reboot and you are rooted.
You might have to update Superuser app and su once you root since its older.
maslinar said:
1. Put this file on your phone SDCARD:
2. Reboot your phone into recover by pressing VOLUME UP+HOME+POWER.
3. Choose "Install from sdcard"
4. Reboot and you are rooted.
You might have to update Superuser app and su once you root since its older.
Click to expand...
Click to collapse
i'm trying...
Hi all,
thanks for reply.
I tried with superoneclick but it hangs in between, i heard that superoneclick is not compatible with GB 2.3.6
i tried with update.zip also it also not working, i come to know that my mobile bootloader is locked. now i need unlock the bootloader, plz help me unlocking the bootloader and todo that i have to boot my mobile in fastboot mode plz help me in any of the one..
or can anybody please upload ODIN flasher galaxy pop plus S5570i, i tried with S5570 ODIN flasher but it is not detecting the mobile.
thanks in advance
i also have the same problem with ma galaxy pop plus . . i tried all the possible ways to get root access .
please let me know if any1 knows how to do it
Hi everyone just now rooted my pop plus...
check this thread
http://forum.xda-developers.com/showthread.php?t=1507688
thanks alot i just got root previlages ...
finally i'm a relived man
Join Galaxy Pop Plus GT-S5570i community at http://handyinfo.host22.com/viewforum.php?f=6
After i install Android 2.3.6 Stock ROM i'm unable to Root My Samsung Galaxy Mini..! Even with i could not get success With SuperOneClick...:crying:
So plzz help me to root my Device.. i Am using S5570XWKTN Stock Rom...
is there any one to help me..??
vishalmodi257 said:
After i install Android 2.3.6 Stock ROM i'm unable to Root My Samsung Galaxy Mini..! Even with i could not get success With SuperOneClick...:crying:
So plzz help me to root my Device.. i Am using S5570XWKTN Stock Rom...
is there any one to help me..??
Click to expand...
Click to collapse
Hi, just flash upd_1.zip file from the attachments in Stock Recovery.
1. Download the file and copy into root directory of sdcard
2. Go to recovery mode by pressing home+power button key combination.
3. Then, navigate with the vol+ and vol- and use home button to select. Choose install zip from sdcard.
4. install the .zip from sd card
5. reboot, done
6. the superuser is now in your drawer. It's an android skull icon.
Root Problem
From where i get upd_1.zip file...
can u give me Link for Download it.. plzzz
http://cmmishra9.wordpress.com/2011/05/13/how-to-root-gingerbread-2-3-3-on-samsung-galaxy-ace/
Root Problem
That file has been removed.....
http://yagyagaire.blogspot.ie/2011/12/rooting-samsung-galaxy-pop-with.html here's tutorial on how to root mini with stock 2.3.6
I have meet the same problem!
vishalmodi257 said:
After i install Android 2.3.6 Stock ROM i'm unable to Root My Samsung Galaxy Mini..! Even with i could not get success With SuperOneClick...:crying:
So plzz help me to root my Device.. i Am using S5570XWKTN Stock Rom...
is there any one to help me..??
Click to expand...
Click to collapse
Hi. i have tried different roms and after that i wannted to go back to stock rom, and i`v installed 2.3.6 xwktn like u and can`t root enymore. here is the solution that worked for me. U have to flash with Odin back u 2.3.4 (xxkpi is the one that i`v installed) and after that install 2.3.6 xwktn and u should root with the upd_1.zip entering in the stock clockworkmod! And it should be the first thing that u do! Today i`v meet the same problem and worked again! Hope u know to use ODIN, and if not i`m shore that is a tutorial with all that!
hope that worked for u to!!!
http://forum.xda-developers.com/showpost.php?p=26512529&postcount=2
instruction + file attached
vishalmodi257 said:
From where i get upd_1.zip file...
can u give me Link for Download it.. plzzz
Click to expand...
Click to collapse
Sorry the upload failed and I didn't notice it. I added the file in the original reply.
Hello,
I'm pretty newbie when dealing with phones, yet pretty good with PCs in general. Which throws me off is mainly term used which means nothing to me. So I'll be as blunt as possible:
how can I reinstall my Samsung Galaxy Ace? Like a fresh install... I tried to do various things with it, ended up by installing jellybean 4.0 and not sure where but it went wrong but it doesn't boot now. I can enter PX-Recovery window, use all rooted functions. Best result I had was when device was booting after "installing a rom from sd card" was a blue screen when loading or just bright screen like the device is on yet nothing else.
Thanks in advance.
IReSky said:
Hello,
I'm pretty newbie when dealing with phones, yet pretty good with PCs in general. Which throws me off is mainly term used which means nothing to me. So I'll be as blunt as possible:
how can I reinstall my Samsung Galaxy Ace? Like a fresh install... I tried to do various things with it, ended up by installing jellybean 4.0 and not sure where but it went wrong but it doesn't boot now. I can enter PX-Recovery window, use all rooted functions. Best result I had was when device was booting after "installing a rom from sd card" was a blue screen when loading or just bright screen like the device is on yet nothing else.
Thanks in advance.
Click to expand...
Click to collapse
Yes, you can flash a fresh stock rom using Odin 4.38
Follow this guide
forum.xda-developers.com/showthread.php?t=1034145?
Here you have a useful Q&A Thread (How to get Root + CWM 5.0.2.6 Fixed, flash a stock rom, and many more...)
forum.xda-developers.com/showthread.php?p=42293402
I was digging that thread and I couldn't find any working links. That thread led to few others websites/threads which also had OPS + Odin links thought they were useless too because none of the download links worked..
Any idea where could I get those OPS files from? I've managed to find Odin 4.38, now I only need the OPS.
Viper The Ripper said:
Yes, you can flash a fresh stock rom using Odin 4.38
Follow this guide
forum.xda-developers.com/showthread.php?t=1034145?
Here you have a useful Q&A Thread (How to get Root + CWM 5.0.2.6 Fixed, flash a stock rom, and many more...)
forum.xda-developers.com/showthread.php?p=42293402
Click to expand...
Click to collapse
IReSky said:
I was digging that thread and I couldn't find any working links. That thread led to few others websites/threads which also had OPS + Odin links thought they were useless too because none of the download links worked..
Any idea where could I get those OPS files from? I've managed to find Odin 4.38, now I only need the OPS.
Click to expand...
Click to collapse
Here you have it
Viper The Ripper said:
Here you have it
Click to expand...
Click to collapse
Shouldn't the zip contain all the OPS files that I would need to input in Odin?
Extract previously downloaded firmware
Open ODIN 4.38 on your PC and change OPS file name to
Cooper_v1.0.ops
Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
If archive contains only <filename>.tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Click to expand...
Click to collapse
IReSky said:
Shouldn't the zip contain all the OPS files that I would need to input in Odin?
Click to expand...
Click to collapse
No... ".ops" file is an unique file, Odin need it recognize your device model
Select ONE PACKAGE and continue the guide (the new firmwares)
Official Firmwares website, choose your country if you want
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
You'll find: Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC in FULL PACKAGE ROMS (normally old roms)
a
Viper The Ripper said:
No... ".ops" file is an unique file, Odin need it recognize your device model
Select ONE PACKAGE and continue the guide (the new firmwares)
Official Firmwares website, choose your country if you want
x
You'll find: Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC in FULL PACKAGE ROMS (normally old roms)
Click to expand...
Click to collapse
Kies doesn't wanna start when the phone is plugged yet starts with no device found and Odin says "Please connect phones !!".
I did format /system... could that be the cause?
IReSky said:
Kies doesn't wanna start when the phone is plugged yet starts with no device found and Odin says "Please connect phones !!".
I did format /system... could that be the cause?
Click to expand...
Click to collapse
No.
Restore a backup if you want and enable USB debug mode, unistall Kies, re-install Samsung drivers and try again using Odin.
You can try changing the USB port too (even using other PC, if you can [friend, brother, father...])
Viper The Ripper said:
No.
Restore a backup if you want and enable USB debug mode, unistall Kies, re-install Samsung drivers and try again using Odin.
You can try changing the USB port too (even using other PC, if you can [friend, brother, father...])
Click to expand...
Click to collapse
Sadly I didn't make a backup thinking it will work.. I will try the other things in a moment. thanks