Hello,
I have flashed the latest thunderzap kernel and I reboot to CWM. Then I made a backup with CMW en reboot again. I can reboot only to CWM now...
Can someone help me?
Одг: [Q] [Help] Boots only to CWM...
Rauwerdinho said:
Hello,
I have flashed the latest thunderzap kernel and I reboot to CWM. Then I made a backup with CMW en reboot again. I can reboot only to CWM now...
Can someone help me?
Click to expand...
Click to collapse
TZ have broken driver that is used for reboot recovery option.
Try to pull out battery, or flash stock kernel wifh odin. You can find it in my signature. Then reflash any custom kernel you want.
Sent from Galaxy S Advance
shut_down said:
TZ have broken driver that is used for reboot recovery option.
Try to pull out battery, or flash stock kernel wifh odin. You can find it in my signature. Then reflash any custom kernel you want.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks!!
I have flashed Q4
It worked!!
Related
Hi, i am want to do a clean install of CM10 but i am lost and confused.
I have Gb stock Rom 2.3.6 pda: XWJW6 csc: dbtjw2
1- How can i root my phone? I tried everything but i can't. I read in some threads that i should use SuperOneClick, Cm10 thread says that i have to use CF-root...
2- Which version of Clockworkmod Recovery should i use? I have 3e-recovery, is it necessary to install CWM?
3- Do you recommend me to use another kernel, or stock kernel is fine?
4- Are the followings steps correct?
a) Root and install CWM
b) Wipe Data (I dont want to backup my data)
c) Install Cm10
d) Install Gapps
e) Install Kernel (If necessary)
Thank you, and i know that all the info is in other threads, but i am confused!.
yoboo said:
Hi, i am want to do a clean install of CM10 but i am lost and confused.
I have Gb stock Rom 2.3.6 pda: XWJW6 csc: dbtjw2
1- How can i root my phone? I tried everything but i can't.
2- Which version of Clockworkmod Recovery should i use?
3- Do you recommend me to use another kernel, or stock kernel is fine?
4- Are the followings steps correct?
a) Root and install CWM
b) Wipe Data (I dont want to backup my data)
c) Install Cm10
d) Install Gapps
e) Install Kernel (If necessary)
Thank you, and i know that all the info is in other threads, but i am confused!.
Click to expand...
Click to collapse
Yes, these are basically the right steps. But don't forget to wipe cache. An instruction how to flash CM10 i also given in the theard of CM10 for your phone
temeritas said:
Yes, these are basically the right steps. But don't forget to wipe cache. An instruction how to flash CM10 i also given in the theard of CM10 for your phone
Click to expand...
Click to collapse
Thanks!:good:
What about kernel and version of CWM?
Anyone??
yoboo said:
Anyone??
Click to expand...
Click to collapse
Just flash cf root kernel using Odin to get root and cwm recovery. Then flash the cm10 zip and gapps.
Sent from my Galaxy Nexus using xda premium
NIMBAH said:
Just flash cf root kernel using Odin to get root and cwm recovery. Then flash the cm10 zip and gapps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you! What about using semaphore kernel?? And just doing cf root I get cwm recovery??
Thank you again!!!!
yoboo said:
Thank you! What about using semaphore kernel?? And just doing cf root I get cwm recovery??
Thank you again!!!!
Click to expand...
Click to collapse
Semaphore kernel is inside the CM10 zip so it will get automatically installed when your flash the zip.
Yes CWM recovery is built into cf root kernel.
Also when you flash the Cm10 zip remember your phone will restart almost straight away and go into boot loop. This is because the partition layout is being changed.
Just reinsert the battery and boot into recovery again. Flash the cm10 zip again and this time it will finish installation.
& its no problem
Sent from my Galaxy Nexus using xda premium
NIMBAH said:
Semaphore kernel is inside the CM10 zip so it will get automatically installed when your flash the zip.
Yes CWM recovery is built into cf root kernel.
Also when you flash the Cm10 zip remember your phone will restart almost straight away and go into boot loop. This is because the partition layout is being changed.
Just reinsert the battery and boot into recovery again. Flash the cm10 zip again and this time it will finish installation.
& its no problem
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank youuu!!!!!
I'm going to try it! Maybe I send you a pm if I have a doubt of course if it isn't a problem
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
warfareonly said:
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Click to expand...
Click to collapse
asf58967 said:
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
Click to expand...
Click to collapse
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Pantherx12 said:
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Click to expand...
Click to collapse
Did you wipe ? Make sure you're on safe kernel.
I had the same !
When you want to flash sth, just uncheck that two thing above "slide to flash"
Hello everyone. I'm a newbie samsung user. I tried to root my phone (N700-Galaxy Note - ICS 4.0.4) using PhilZ Recovery method:
http://forum.xda-developers.com/showthread.php?t=1901191
When I flash the zip in the stock recovery, everything seems to be ok, then when I got out and pressed "Reboot System now", the phone just turned off. I tried to power it on, but I stuck at the N7000 Logo (the logo just appears for a few seconds then disappears). However, I can still access the PhilZ Recovery
What should I do now? Should I flash a new rom with new kernel using that recovery (e.g: OmniRom with Raw Kernel)?
Please help, I'm really worry :crying:
Since you have Philz kernel then you can flash any TW ROM or AOSP ROM which is not KitKat. If you want to try out KitKat then you would have to first flash Raw Kernel and then from Raw kernel you can flash KitKat (ex. OmniROM).
If you want to go back to stock then you would have to flash a stock ROM using Odin.
whats the name of the zip file you flashed?
nokiamodeln91 said:
whats the name of the zip file you flashed?
Click to expand...
Click to collapse
This file:http://d-h.st/users/philz_touch/?fld_id=16061#files
Did you flash it too? Do you encounter that problem like me ?
XperiAwesome said:
This file:http://d-h.st/users/philz_touch/?fld_id=16061#files
Did you flash it too? Do you encounter that problem like me ?
Click to expand...
Click to collapse
come on! you need to be more specific about the link you gave. it opens a can of kernels.
nokiamodeln91 said:
come on! you need to be more specific about the link you gave. it opens a can of kernels.
Click to expand...
Click to collapse
I don't think he has to be more specific, all of those kernels are for JB
@XperiAwesome flash an ICS Philz Kernel
Guys i am new here, i am looking for a recovery to flash kitkat rom. on my previews device i just only need cwm zip then flash for recovery. in there device as i read you need kernel or something before flashing cwm (im not sure sorry. ) my phone galaxy n7000 was new, i need you advice guys and can you guys give me the link for cwm for kitkat. thanks in advance.
ANDROID-000 said:
Guys i am new here, i am looking for a recovery to flash kitkat rom. on my previews device i just only need cwm zip then flash for recovery. in there device as i read you need kernel or something before flashing cwm (im not sure sorry. ) my phone galaxy n7000 was new, i need you advice guys and can you guys give me the link for cwm for kitkat. thanks in advance.
Click to expand...
Click to collapse
If you are on stock rom, flash philz kernel first and reboot to recovery , flash Raw kernel and reboot recovery and flash KK rom with gapps.
treacherous_hawk said:
If you are on stock rom, flash philz kernel first and reboot to recovery , flash Raw kernel and reboot recovery and flash KK rom with gapps.
Click to expand...
Click to collapse
2 kernel? Is that a permanent recovery?
Flash phils kernel using stock recovery?
Can i flash kk without rooting my phone? Can i ask for the link. Thanks for the reply:thumbup:
ANDROID-000 said:
2 kernel? Is that a permanent recovery?
Flash phils kernel using stock recovery?
Can i flash kk without rooting my phone? Can i ask for the link. Thanks for the reply:thumbup:
Click to expand...
Click to collapse
Yes permanent recovery.
Yes flash philz kernel in stock recovery. Do the factory reset and wipes in philz recovery. It will root your phone too but only till you flash another rom with or without root.
You can flash omnirom with gapps and don't flash superSU wouldn't have root.
Google for philz kernel n7000 and Raw kernel R4.
Sent from my GT-N7000 using Tapatalk
Thanks a lot bro....:thumbup: I'll just look in development section it is there right?:what::beer:
ANDROID-000 said:
Thanks a lot bro....:thumbup: I'll just look in development section it is there right?:what::beer:
Click to expand...
Click to collapse
I mentioned google, easiest way out.
Philz kernel: http://lmgtfy.com/?q=philz+kernel+n7000
Raw kernel: http://lmgtfy.com/?q=raw+kernel+n7000
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
nobilove said:
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
Click to expand...
Click to collapse
Try to flash philz kernel via odin in download mode using the .tar file. If it succeeds try to reboot to recovery using volume up+power+home button.
nobilove said:
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
Click to expand...
Click to collapse
When you flashed stock rom did you include repartition? Can you go to either download mode or recovery mode now?
nobilove said:
I had a galaxy note with 10.3 CM. install will install by CWM CM11 and now I can not get into recovery. then install stock rom by odin and stays at the samsung logo. I hope someone can help me thanks.
Click to expand...
Click to collapse
Try to flash philz kerne
Kael ruch said:
Try to flash philz kerne
Click to expand...
Click to collapse
Go home Kael Ruch
Sent from my Nexus 5 using Tapatalk