Database Develop

[Q] how to root gingerbread 2.3.3

How can i root the gingerbread 2.3.3 on the galaxy S I9000?
My phone was rooted and then I installed gingerbread 2.3.3 and then the root was gone. Anyone know how to root this?
thanks in advance

Depends on which 2.3.3 version is your phone - JVK< JVB< JVH< JVO. You could flash the chainfire's CF-Root 3.2 kernel coz it's pretty clean and simple. Just go in his thread and I think in post No 6 you'll find the latest versions - just download the one for your ROM, unzip it to get the .tar zip and flash it as a PDA through odin - you'll get both root and CWM

kova4a said:
Depends on which 2.3.3 version is your phone - JVK< JVB< JVH< JVO. You could flash the chainfire's CF-Root 3.2 kernel coz it's pretty clean and simple. Just go in his thread and I think in post No 6 you'll find the latest versions - just download the one for your ROM, unzip it to get the .tar zip and flash it as a PDA through odin - you'll get both root and CWM
Click to expand...
Click to collapse
Thank you very much.
edit: my phone keeps rebooting now

kova4a said:
Depends on which 2.3.3 version is your phone - JVK< JVB< JVH< JVO. You could flash the chainfire's CF-Root 3.2 kernel coz it's pretty clean and simple. Just go in his thread and I think in post No 6 you'll find the latest versions - just download the one for your ROM, unzip it to get the .tar zip and flash it as a PDA through odin - you'll get both root and CWM
Click to expand...
Click to collapse
I have JVK. I downloaded this gingerbread 2.3.3 :
and then i went to that topic you said and installed 3.2. But maybe I installed the wrong one. Do you know which one i have to instal?
this is my info:
firmware: 2.3.3
baseband: 19000xxjvk
kernel: 2.6.35.7- i9000xwjvh-cl184813 [email protected] #2
buildnumber: gingerbread.xxjvk
I think it was the kernel I last downloaded. So I reinstalled gingerbread 2.3.3 to remove the root.

i9001
firmware: 2.3.3
baseband: I9001BUKE2
kernel: 2.6.35.7- perf
[email protected] #2
buildnumber: gingerbread.BUkE5
How to root??
Please help nobody knows that...

[Q] How to root N7000XXLA6?

Does anyone have a suggestion how to root a Note with version N7000XXLA6?
For your information:
- SuperOneClick don't work.
- DooMLoRD's Easy Rooting Toolkit [v4.0](zergRush Exploit) don't work.
Any suggestions?!?

Timmy_01 said:
Does anyone have a suggestion how to root a Note with version N7000XXLA6?
For your information:
- SuperOneClick don't work.
- DooMLoRD's Easy Rooting Toolkit [v4.0](zergRush Exploit) don't work.
Any suggestions?!?
Click to expand...
Click to collapse
As I read in this post, you have to flash an older stock rom, root it, then flash the new stock rom using mobile-odin with keep root option on.
Text from the post:
"As New ROMs are not direct rootable, you cant root it direct method like Zergrush exploit or CF-Root, If you want such new ROMs Rooted, You shud have currant Older ROM installed, If you are not rooted and flashed Newer ROM, first downgrade to older ROM as above said.then you may update n Root it with one of following two methods."

XXLA6
i want also root my note
Baseband Version : N7000XXLA4
Buildnumber: GINGERBREAD.XXLA6
KERNEL: 2.6.35.7-N7000XXLA6-CL907341 [email protected]#2
anyone how and what to use

As jellevanb wisely stated... This thread holds the answers: http://forum.xda-developers.com/showthread.php?t=1424997
I was on La6, flashed KKA with PC Odin, then used CF-Root for KKA (props to Chainfire for his amazing work) then flashed LA6 on-device using CWM Manager that was installed with CF-Root. Now I have La6 with root

I also was on LA6, flashed AbyssNotekernel42CWTouchOriginalLogo.tar with PC Odin then used CF-Root-SGN_XX_SER_LA6-v5.0-CWM5. It worked for me.

The easiest way to gain root would be this:
http://forum.xda-developers.com/showpost.php?p=25285584&postcount=3

chasmodo said:
The easiest way to gain root would be this:
http://forum.xda-developers.com/showpost.php?p=25285584&postcount=3
Click to expand...
Click to collapse
i flash it first CF ROOT Via odin . then Wipe data / factory reset / wipe dalvick cahce wipe cache ... then install jbroid kernel and flash franco that's right ?

Yes that's right.

CWM on galaxy note
hey guys i have rooted my galaxy note but i want install MIUI Rom
i think need first clockworkmod ,
have wacthed so many videos but still i dont know how to do it

[Q] need hands for rooting Galaxy S I9000

Hi,
im trying to root my Galaxy S nw bt i really dont know how to do it.
ive searched on google for several hours bt still dont get it.
so could you guys please help me?
here's my phone info:
Model number: GT-I9000
Firmware version: 2.3.3
Baseband version: I9000SRVJ1
Kernel version: [email protected] #2
Build number: GINGERBREAD.XWJVH
one of my frends says mine's already hacked(rooted) and i asked him why,
and he answered because i can find out the word 'root' from the Kernel version already.
bt i dont knw wat is wat,
so anyone can help me?
tell me wat i should do from the very beginning for rooting my I9000. plz?
thx

Auclown said:
Hi,
im trying to root my Galaxy S nw bt i really dont know how to do it.
ive searched on google for several hours bt still dont get it.
so could you guys please help me?
here's my phone info:
Model number: GT-I9000
Firmware version: 2.3.3
Baseband version: I9000SRVJ1
Kernel version: [email protected] #2
Build number: GINGERBREAD.XWJVH
one of my frends says mine's already hacked(rooted) and i asked him why,
and he answered because i can find out the word 'root' from the Kernel version already.
i dont knw wat is wat,
so anyone can help me?
tell me wat i should do from the very beginning for rooting my I9000.
thx
Click to expand...
Click to collapse
You can install cf -root kernel, look at it in forum development
Sent from Galaxy S ICS

thx.
thx for information bt i forgot to say this,
im new here.
so can u link it or something plz?
i could find so many development menu in this forum so i dont knw where i should search that thing.

download superuser from the market, if you can use it then your phone is rooted

thx mate
i can download and run superuser bt theres nothing in it.
no apps list and no log information appears.
does it mean mines not rooted? or yes?

only apps that requires root is displayed in the apps list and log. yeah your phone is rooted if still in doubt find an app in the market that requires root

gud gud gud
hmmmmmm thx.
bt why my phone is so gay if my phones already rooted?
everyone says phones r getting faster at running apps or else but mines so slow.
anything i hav to do for that?

rooting is the same as having administrator rights on windows pc, it doesnt improve anything but instead gives you rights to modify your system. try RAM Manager Free from the market, it can improve your phone.
you can also download CF-Root-ext4-v1.3-Addon.apk from chainfire's thread http://forum.xda-developers.com/showthread.php?t=788108&highlight=chainfire
after you download the .apk put it in your phone and install it, open the app and click convert to ext4. this is basically a lagfix.

IF u want ur phone faster and stable and long battery life life try to install custom rom. It depends upon ur test which one u like...i suggest you to install DarkyRom its much stable , faster and better battery life..!

HI!
I'm new to rooting and have about the same specs as the guy below, so i wonder if anyone could direct me to a good rooting and flashing guide? I really wanna have ICS on my phone. Could you also direct me to a stable ICS rom?
Here's the specs:
Model number: GT-I9000
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernel version: [email protected] #2
Build number: GINGERBREAD.XWJVH
Thanks!

*Small Guide*
Edde05 said:
HI!
I'm new to rooting and have about the same specs as the guy below, so i wonder if anyone could direct me to a good rooting and flashing guide? I really wanna have ICS on my phone. Could you also direct me to a stable ICS rom?
Here's the specs:
Model number: GT-I9000
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernel version: [email protected] #2
Build number: GINGERBREAD.XWJVH
Thanks!
Click to expand...
Click to collapse
DOWNLOAD ROOT HERE : http://download.chainfire.eu/121/CF-Root/SGS/CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.zip
HOW TO :
1. Download and extract the root of CF XX_OXA_JVO-v3.2-CWM3RFS.zip
2. Start Odin
3. Select the unzipped. Tar as a PDA. Leave everything else in Odin as it is! No pit, no Repart, no MODEM / PHONE, not CSC!
4. Boot SGS into the download mode by pressing and holding of Volume Down + Home + Power.
5. Connect the phone just now with the computer and wait for the driver to be installed.
6. If the drivers were fully installed, will appear in the top left of Odin, a yellow icon.
7. Press Start and wait until the phone is restarted. Lead.
8. Rooted finished.

Please remove post, thanks
Please remove post, thanks

HOW TO :
1. Download and extract the root of CF XX_OXA_JVO-v3.2-CWM3RFS.zip
2. Start Odin 1.3
3. Select the unzipped. Tar as a PDA. Leave everything else in Odin as it is! No pit, no Repart, no MODEM / PHONE, not CSC!
4. Boot SGS into the download mode by pressing and holding of Volume Down + Home + Power.
5. Connect the phone just now with the computer and wait for the driver to be installed.
6. If the drivers were fully installed, will appear in the top left of Odin, a yellow icon.
7. Press Start and wait until the phone is restarted. Lead.
8. Rooted finished.[/QUOTE]
Does it have to be odin 1.3? I got odin 1.85. If it needs to be 1.3, could you please direct me to a download?

Edde05 said:
Does it have to be odin 1.3? I got odin 1.85. If it needs to be 1.3, could you please direct me to a download?
Click to expand...
Click to collapse
it work on odin 1.3 and 1.85 , I didn't see that

[Q] Noob wanting to root

Hiya all, first post
Here's an old one...i want to root my galaxy note ...
My model is gt-n7000 running android 2.3.6
Baseband n7000xxla4
Kernel LA6
Build gingerbread.xxla6
Even though many of you more technically advanced may find it very easy i have trawled the net & YouTube & just do not know what way to safely go about it!
It's so simple to download a set of files & it does look easy to do but there are a few different ways,
Can anyone please help?
Many thanks in advance
....johnno

For firmware KL7 or later you can't root directly. So you need to flash as stock, but pre-rooted ROM using PC Odin for example:
http://forum.xda-developers.com/showthread.php?t=1352945&referrerid=4386116
After this, flash a Kernel that has CWM 5 and is compatibel to CF Root Kernel (with Mobil ODIN - see market) like this one:
http://forum.xda-developers.com/show....php?t=1342807

[Q] Help!!

I have a i9000t full stock Firmware 2.1-update/ Kernell 2.6.29 /build number ECLAIR.UBJI1 and the carrier its claro P.R. and i want to root it and install cm 9 or cm 10 rom. any threat that tell me how to do it will be thank..

mnatal said:
I have a i9000t full stock Firmware 2.1-update/ Kernell 2.6.29 /build number ECLAIR.UBJI1 and the carrier its claro P.R. and i want to root it and install cm 9 or cm 10 rom. any threat that tell me how to do it will be thank..
Click to expand...
Click to collapse
Follow the tutorial on a rom, what you want to install... I think you will have to root your device, then go to JVU Stock 2.3.6 Gingerbread rom, then you free to install any CM9 or CM10

mnatal said:
I have a i9000t full stock Firmware 2.1-update/ Kernell 2.6.29 /build number ECLAIR.UBJI1 and the carrier its claro P.R. and i want to root it and install cm 9 or cm 10 rom. any threat that tell me how to do it will be thank..
Click to expand...
Click to collapse
First xou have to root your device, then you have to install the cwm recovery, download the Rom and the gapps from a thread. Next you have to do a backup if you want to go back to 2.1. And after this you have to do a full wipe from recovery and then install the Rom and afterwards the gapps and then reboot.
Hope i helped

You can try superoneclick to root your phone. I was on 2.3.3 I9000M and rooted using one click tool. The tool supports many other models. Make sure USB debugging is enabled and all the drivers are installed. Connect your phone and turn on USB, choose auto under Exploit section and click root. Download the tool (Latest Version) from here http://forum.xda-developers.com/showthread.php?t=803682
If rooting process is Successful, superuser will be installed automatically in your phone.
Read Everything before you do anything.

markey97 said:
First xou have to root your device, then you have to install the cwm recovery, download the Rom and the gapps from a thread. Next you have to do a backup if you want to go back to 2.1. And after this you have to do a full wipe from recovery and then install the Rom and afterwards the gapps and then reboot.
Hope i helped
Click to expand...
Click to collapse
i have tried to root it but when i look for the files that i need to root it most of them are expired are not on the links provided in the tutorials

osterizerble said:
You can try superoneclick to root your phone. I was on 2.3.3 I9000M and rooted using one click tool. The tool supports many other models. Make sure USB debugging is enabled and all the drivers are installed. Connect your phone and turn on USB, choose auto under Exploit section and click root. Download the tool (Latest Version) from here http://forum.xda-developers.com/showthread.php?t=803682
If rooting process is Successful, superuser will be installed automatically in your phone.
Read Everything before you do anything.
Click to expand...
Click to collapse
i have tried to open superoneclick but it wont run as soon as i tried to opened windows show me a message tha oneclick have stop working and close the program

mnatal said:
i have tried to root it but when i look for the files that i need to root it most of them are expired are not on the links provided in the tutorials
Click to expand...
Click to collapse
update to gingerbread via odin and then try this thread out http://forum.xda-developers.com/showthread.php?t=1044765 and follow the instructions in the 2nd post. There are also the download links. Then follow the instructions i've written in the previous post
hope i could help

Have a look here.
http://forum.xda-developers.com/showthread.php?t=1796807
http://www.unlockroot.com/

mnatal said:
i have tried to open superoneclick but it wont run as soon as i tried to opened windows show me a message tha oneclick have stop working and close the program
Click to expand...
Click to collapse
Model: GT-I9000T
Firmware Version: 2.1-update1
Baseband Version: I9000TUBJG7
Kernel Version: 2.6.29
[email protected] #2
Build Number: ECLAIR.UBJG5
did you figure anything out? I found the firmware (2.3.3) for my model and country (Trinidad and Tobago) at samsung updates but my problem is that I don't know which Odin program to use for my model.
I was thinking about using the update method intended for the GT-I9000 to update my I9000T to gingerbread. Apparently the phones are identical except that the GT-I9000T supports 850 MHz 3G while the GT-I9000 supports 900 MHZ 3G instead. I am wondering if it will work without bricking my phone