i got this csc unknown and can't connect to kies ..tried to go back to wipe nothing...where can i find csc to install in odin???i tried the csc select from store but it gives me unrecognized application
Related
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
hi ,
most probably the reason Smart Switch is not working, is that you are "rooted " ?
Have you tried flashing the latest correct stock Rom of you device ,
not just any old Rom etc
(Reasons /think in terms of .. old /updated boot-loader etc )
ismailykr said:
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
Click to expand...
Click to collapse
hi ,
as far as i know Kies does not "work " on Note5
You have to use Smart Switch .
See screenshot what happens if you try to connect to Kies .
(i have N920 C in this case )
Further ,Smart Switch most probably only works on non rooted devices etc and not on rooted /modify devices .I might be wrong ,but this is what my understanding of Smart Switch .
good luck
Have you tried flashing back to stock OL1
Have you solved this problem? I have the same and neither smartswitch nor kies nor odin works. Please HELP!!!
I tried to change the phone to the original rom and in the middle of the process it failed and a screen with a message appeared saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.". I saw some videos saying that you can enter the download mode and fix it with odin but I can't enter. Also I read that if you can't enter the download mode is because of the bootloader, I found a rom with the PIT, PDA, CSC, BOOTLOADER and PHONE files but the problem is that when I plug it to the pc it doesn't even recognize the phone, not even a message saying that windows couldn't recognize it and I have all the drivers installed or the typical sound that the pc makes when you plug something in the usb port. I don't know what to do.
Hi all,
Looking for some assistance... I jumped the gun after reading through a few of these forms and attempted to update the firmware on my Samsung Galaxy S2 Tab 9.7 SM-T817W official to Android 7 (T817WVLU3CQE4) I downloaded online. I was just looking for an official update to version 7 (ie no root or custom F/W) as nothing would happen over the air.
From some additional reading, I believe if I obtain the original firmware T817WVLU0AOF3 and flash it with Odin, it may bring the tablet back to life?
Does anyone has firmware T817WVLU0AOF3 ?
Device current status: boots to "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software." I can enter download mode using PWR + VOL DN + HOME.
Initial process I followed during attempted upgrade:
- downloaded "T817WVLU3CQE4_T817WOYA3CQE4_T817WVLU3CQE4_HOME.tar.md5" firmware that MD5 hashes to "6af7e575035d1877b877508e06b29317"
- downloaded and installed samsung USB driver SAMSUNG_USB_Driver_for_Mobile_Phones_ver_1.5.65.0
- put tablet into download mode
- Connected to tablet with Odin3 v3.13.1 and flashed with options "Auto Reboot" and "F. Reset Time" checked only using firmware above in the AP box.
- process failed just after system.img file line in Odin and the table screen showed "Downloading..." with the progress bar at the beginning (one bar of progress)
- after resart, device boots to "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software."
Where I may have gone wrong:
- Did not enable USB debugging
- Did not OEM unlock bootloader
- Factory Reset Protection (FRP) was on (Google account on device and PIN for entry screen)
I'm not sure if all and specifically what of these options above need to be set for the upgrade to work in this case. Does anyone have specific insight here?
Troubleshooting attempted:
- tried different USB cable
- tried different USB port on computer
- tried different version of Odin (Odin3_v3.12.7, Odin3-v3.10.6)
- downloaded Samsung Smart Switch- attempted to run Emergency Recovery mode => device would not show up in list.
- downloaded Samsung Kies v 3 - attempted to update firmware via menu => no firmware found
- downloaded "T817WVLU2AOK3_T817WOYA2AOK3_T817WVLU2AOK3_HOME.tar.md5" 5.1.1 firmware that MD5 hashes to "7bc616642e6556b8e00a4f4a62ff3b68" => failed the same
- edited at custom .tar.md5 file that only contained recovery.img from above => with downloaded with PASS in Odin but still would not boot. Makes me think cable, USB and Odin version is OK and all issues are around wrong firmware and other processes.
Any help appreciated! Thanks!
Today i was updating my s10 exynos and during the flashing via odin i accidentaly disconnected the cable and the proccess failed
after i got an exclamation mark erros saying "an error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software"
I tried using this but nothing happend ( i tried reinstalling the device drivers).
plss help
https://snipboard.io/QYI0t7.jpg
https://snipboard.io/FHUouS.jpg
edit vol1 : i have the solution simply use odin to flash
How did you get into download mode? I have the same error and cannot get into the download mode
Edit: I fixed with my Z3x Samsung Tool Pro Box
I bought a rooted phone. It had TWRP and was working. I tried to factory reset it and it stopped working. Now It loads only the system's information like the model number and quality check passes. I've tried to connect it to Odin and it is recognized by Odin but it doesn't receive the bianary files properly it just says fail. Any time I try to pass them on to the droid. model 950U XAA I am trying to find the proper bl, ap, cp and csc, files to try to recover the phone. It does go into download mode with pressing the power ,down volume and bixby buttons.
Wind_Talon said:
I bought a rooted phone. It had TWRP and was working. I tried to factory reset it and it stopped working. Now It loads only the system's information like the model number and quality check passes. I've tried to connect it to Odin and it is recognized by Odin but it doesn't receive the bianary files properly it just says fail. Any time I try to pass them on to the droid. model 950U XAA I am trying to find the proper bl, ap, cp and csc, files to try to recover the phone. It does go into download mode with pressing the power ,down volume and bixby buttons.
Click to expand...
Click to collapse
The binary error is usually because you are trying to flash older filmware than what is already on the phone. Download the latest filmware and it should work
You can use Frija to download the latest filmware at a decent speed.
https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
I tried Frija but it doesn't find the model number I input. SM-950U XAA Should I try another type of search?
Wind_Talon said:
I tried Frija but it doesn't find the model number I input. SM-950U XAA Should I try another type of search?
Click to expand...
Click to collapse
Ah sorry, your phone is a US varient? Frija won't work for you then. Try SamMobile or Updato.com