Related
Hey guys i am starting this thread here as i find there are so many people asking questions and bricking their phones.I just want to help out people and save them from bricking their phones..
i have tried all Froyo based roms available for the captivate.i have good experience in rooting,clockworkmod and flashing roms.I would like to help out all new members here as much possible because just 2 months back i had trouble finding out things...
So what are you guys waiting for ask away....!
P.S:also i kindly request the other senior members and developers here to correct me if i am wrong anywhere and ya i dont want any donations....
Hey, I'm working on something with a similar spirit as this.
A work in progress: self help brick recovery guide
If you would want help out with this. I believe that it could help the q&a and other section of the captivate thread a lot by reducing the number of brick threads
If either of you have experience with web coding, perhaps it would be worthwhile to make up a page that has an interactive checklist of brick steps. Sort of a step-by-step troubleshooter.
For example, the first page could just be the question about whether the phone shows any signs of life at all or not, then have a page with selectable items about the Rom/kernel/modem setup, then move into more specific items.
See the attached zip for what I'm talking about.
speedy_11 said:
Hey, I'm working on something with a similar spirit as this.
A work in progress: self help brick recovery guide
If you would want help out with this. I believe that it could help the q&a and other section of the captivate thread a lot by reducing the number of brick threads
Click to expand...
Click to collapse
Same spirit here mate i am with you lets do it....!
But i will be focussing on problems of members other than bricking and also i believe prevention would be better than cure....!
jmtheiss said:
If either of you have experience with web coding, perhaps it would be worthwhile to make up a page that has an interactive checklist of brick steps. Sort of a step-by-step troubleshooter.
For example, the first page could just be the question about whether the phone shows any signs of life at all or not, then have a page with selectable items about the Rom/kernel/modem setup, then move into more specific items.
See the attached zip for what I'm talking about.
Click to expand...
Click to collapse
I saw the zip and got what you are saying i liked it. I have a decent hold over html & java so i must be able to create that....!
But i will need space to host it....!
Perhaps in lieu of hosting space, save it as an all-in-one zip file and post it on here. You wouldn't need a large amount additional space (I assume) as there probably wouldn't be a huge need for images. If that's the case, it would be all text, which should be fairly small.
jmtheiss said:
Perhaps in lieu of hosting space, save it as an all-in-one zip file and post it on here. You wouldn't need a large amount additional space (I assume) as there probably wouldn't be a huge need for images. If that's the case, it would be all text, which should be fairly small.
Click to expand...
Click to collapse
true it wont be a big zip file......!
I will create it and post it here
Wow jmtheiss you took my idea to the next level, i never though of making it interactive. But that my be the key that really will make it work.
sorry adicool I'm no good with HTML or coding i will have to leave that to you. But I have a knack for graphic design. Plus I can find and collect the images that could be use as examples (ex. like a soft brick screen)
speedy_11 said:
Wow jmtheiss you took my idea to the next level, i never though of making it interactive. But that my be the key that really will make it work.
sorry adicool I'm no good with HTML or coding i will have to leave that to you. But I have a knack for graphic design. Plus I can find and collect the images that could be use as examples (ex. like a soft brick screen)
Click to expand...
Click to collapse
i just created a test version to see if i still remember html just have a look at this attachment below....!
open the test.html first i have just created a working link for rooting others i will be doing soon,tell me what you think of it....!
adicool said:
i just created a test version to see if i still remember html just have a look at this attachment below....!
open the test.html first i have just created a working link for rooting others i will be doing soon,tell me what you think of it....!
Click to expand...
Click to collapse
Looks good to me. Clean, simple, easy to follow.
A good starting point, if you need any help feel free to ask.
Thought here: The one package is good. I'm also thing that we can have each section posted package as a separate package too (along with the whole package). So those who only need one thing like rooting the can just download that section
Hi! I'm new to the forums and need some help. I have stock I897UCKB1, sucessfully rooted and unlocked it. I would like to try out some ROMs, CM7 first. How should i start? I assume i have Eclair/Froyo bootloaders, right? I've installed ROM Manager Premium, clicked flash clockworkmod, and to reboot to recovery but it's only stock recovery. How should i proceed? Also i need some enlightment on bootloaders: if i flash the newest GB ATT bootloaders will every ROM work with it? Thanks in advance!
Go to the general section, there is a thread called "sticky roll-up" in there is a link to a thread called "e: signature verification failed" that is the work around you need for cwm (or any zip) to flash
Or you can flash a froyo kernel that has cwm baked in with odin like speedmod...
I wouldn't mess with bootloaders st this point in your flashing experience that its the only time you risk a real hard brick do leave those alone until you know for sure what you're doing.
I totally forgot about muse, so here's my on take of the guide.
bazarimajom said:
Hi! I'm new to the forums and need some help. I have stock I897UCKB1, sucessfully rooted and unlocked it. I would like to try out some ROMs, CM7 first. How should i start? I assume i have Eclair/Froyo bootloaders, right? I've installed ROM Manager Premium, clicked flash clockworkmod, and to reboot to recovery but it's only stock recovery. How should i proceed? Also i need some enlightment on bootloaders: if i flash the newest GB ATT bootloaders will every ROM work with it? Thanks in advance!
Click to expand...
Click to collapse
I would advice you to first try flashing a few froyo based roms just to gain experience in flashing after that you can move over to GB
as told by my friends here there is a thread here that fixes that cwm problem .!
If you still need help or cant find it do post here and i would be more than happy to help...!whatever you do just dont mess with bootloaders atm as they can cause your device to be bricked...
I would say start off first by flashing cognition 4.5.3....!
speedy_11 said:
A good starting point, if you need any help feel free to ask.
Thought here: The one package is good. I'm also thing that we can have each section posted package as a separate package too (along with the whole package). So those who only need one thing like rooting the can just download that section
Click to expand...
Click to collapse
Hmmm well that can be done !
i have college today i will get started with the html again once i come back....
lets finish this thing soon!
Edit:just finsihed the package for 2.2 only,have a look at the attachment,also its not complete yet but it had basic things...!
studacris said:
Go to the general section, there is a thread called "sticky roll-up" in there is a link to a thread called "e: signature verification failed" that is the work around you need for cwm (or any zip) to flash
Or you can flash a froyo kernel that has cwm baked in with odin like speedmod...
I wouldn't mess with bootloaders st this point in your flashing experience that its the only time you risk a real hard brick do leave those alone until you know for sure what you're doing.
Click to expand...
Click to collapse
adicool said:
I would advice you to first try flashing a few froyo based roms just to gain experience in flashing after that you can move over to GB
as told by my friends here there is a thread here that fixes that cwm problem .!
If you still need help or cant find it do post here and i would be more than happy to help...!whatever you do just dont mess with bootloaders atm as they can cause your device to be bricked...
I would say start off first by flashing cognition 4.5.3....!
Click to expand...
Click to collapse
Thanks, i was able to get CWM to work with speedmod kernel, so i take your advice now and try out some froyo roms!
bazarimajom said:
Thanks, i was able to get CWM to work with speedmod kernel, so i take your advice now and try out some froyo roms!
Click to expand...
Click to collapse
Cool.....!
dont forget to follow the instructions before flashing...
adicool said:
Edit:just finsihed the package for 2.2 only,have a look at the attachment,also its not complete yet but it had basic things...!
Click to expand...
Click to collapse
The information looks good, i saw that on the flash back to stock you didn't put hemdiall. Since linux and mac users cant use odin
Did you take a peak at my attempt with muse?
speedy_11 said:
The information looks good, i saw that on the flash back to stock you didn't put hemdiall. Since linux and mac users cant use odin
Did you take a peak at my attempt with muse?
Click to expand...
Click to collapse
oops i forgot that, i dont use mac so i missed it lol....!
yeah i saw your attempt it was decent enough mate,if you want to try more software try adobe dreamweaver it will help you develop web pages without html
dreamweaver would be great but my current computer wouldn't be able to handle it and i dont have the money for it. muse is free until the final product is done that why im using it.
i pm'ed you but i dont know if it sent
Hi there guys. As you probably noticed,i'm new here,so pardon me if my question sounds noobish at the time,but I promise I'll learn from you guys! Thanks!
So,the question's simple. How do I update my phone's firmware? Don't wanna brick or possibly damage my phone here,as I just bought a couple of days ago. So,is there any risk to update the phone's firmware? Thanks bros!
Have you use search features before asking this question?
http://forum.xda-developers.com/showthread.php?t=1111771
Yeah,saw that already,but it seems to convoluted for me. I need a one-to-one kinda reply. Honestly,I didn't understand anything that was written on that page. So,could please someone clarify it in a more simple,noobish,way?
Thanks bro!
pdf guides are included in the kit. just follow them
either you can use KDZ or R&D for the official
or flash any custom ROM with CWM
(the tutor is already out there)
and the risk ? bootloop or brick maybe
Thanks bros! And another thing,what are custom ROMs? I keep hearing about it like Cyanogen? What's the upside for using it?
Laier94 said:
Thanks bros! And another thing,what are custom ROMs? I keep hearing about it like Cyanogen? What's the upside for using it?
Click to expand...
Click to collapse
Custom roms in simple terms are unofficial versions of the o/s modified or "cooked" by people who want to add or remove certain features or performance tweaks. The upside is you can find a ROM that suits your usage and aesthetic preferences. For more info read through some ROM threads and compare their features.
However there is always a chance something could go wrong even if you know what you are doing. So my advice would be to read and re read the instructions from rooting to flashing radios to flashing roms and look up the termanology until you think you understand and then read it all again. There are some good guides around that can givevyou the basics.
Otherwise you can wait until your carrier releases a official update.
Sent from my HTC EVO 3D X515m using xda premium
Thanks for clarifying bros!
And another thing,I just saw this vid at Youtube.
It's called "How To Install CyanogenMod 7 On Your Android Device"
I can't post the link here because im still new,haha!
Is it really that easy to install Cyanogenmod on your phone? But your phone have to be rooted first,right?
I saw the list with the firmware from various countries,but not mine,Malaysia. How do I solve this? I'm still suck with V10-a,which i think is the oldest firmware for OB.
Also,what are these baseband,kernel and build number thingies? Anything important? Thanks! Really starting to get interested in these things!
I think the following is related to malayians so you have to use an indonesian firmware :
http://csmg.lgmobile.com:9002/csmg/b2c/client/tool_mode_country_check.jsp?model=LGP970&country=MY
- you can flash firmwares anytime whatever the situation
- to flash a ROM (cyanogen, nova...) you need the custom recovery mod called ClockworkMod alias CWM (available on the market via ROM Manager app, or my kit)
- and for CWM, root access is needed
once phone is rooted and CWM installed, phone potential is extended to the infinite. you can then install a lot of useful apps of more and customize your phone.
I think the general goal of all of that, is to optimize and extend possibilities as far as possible and then you'll be able to say that you "truly own" your phone
Thanks for clearing that up bro. BTW,would you recommend me using Gingerbreak to root my phone? Since i'm using an older firmware,it should be ok,right?
no problem, blackjack should do it too. do as your feeling
Ilko said:
no problem, blackjack should do it too. do as your feeling
Click to expand...
Click to collapse
Thanks bro! Anyway,anything else I should know and do before I root my phone? Like should I do a factory reset,battery level 100% or something?
2 steps : root, flash recovery.
know that you'll have to use an app to boot into recovery (ROM manager, anreboot, ezboot...) take a look at my thread for more infos
Ilko said:
2 steps : root, flash recovery.
know that you'll have to use an app to boot into recovery (ROM manager, anreboot, ezboot...) take a look at my thread for more infos
Click to expand...
Click to collapse
Great! Cool bro,thanks! And sorry for the stupid question,but what are KDZs?
firmware files are in .kdz format
Ilko said:
firmware files are in .kdz format
Click to expand...
Click to collapse
Ouh,wow,did that felt stupid,haha. So what you're saying is,after rooting my phone,I should get to installing ClockWorkMod Recovery,am I right? And the only way to install it is using the computer,connect it with the phone,and execute the UPK that you have provided in your download link. After that,I use the app,EzBoot,to boot into recovery mode,is this correct?
After that,what will I do in the recovery mode? Thankies again!
all right. as I said earlier, the recovery mode extends phone potential in an easy way. many ROMs and mods must be did via recovery. in fact, CWM helps you flashing files, roms, doing backups/restorations and more. jump the step and see by yourself.
don't forget to backup before anything
Ilko said:
all right. as I said earlier, the recovery mode extends phone potential in an easy way. many ROMs and mods must be did via recovery. in fact, CWM helps you flashing files, roms, doing backups/restorations and more. jump the step and see by yourself.
don't forget to backup before anything
Click to expand...
Click to collapse
By backing up,you mean backing up contacts and internal memory stuffs,right?
All right! Will root my phone as soon as my charge hits 100%! Using gingerbreak! Is the root reverse-able? I mean,can I unroot my phone once I root it?
you don't need 100% battery as long phone is plugged. for now, blackjack doesn't have a reverse process. but gingerbreak, yes, considering the fact you stay on v10a/b. you may try with the new superoneclick. the most radical method is still flashing a firmware (so you'll lose all stuffs)
and yes, backup any saveable thing. although CWM saves all datas, more safety is more safe
Ilko said:
you don't need 100% battery as long phone is plugged. for now, blackjack doesn't have a reverse process. but gingerbreak, yes, considering the fact you stay on v10a/b. you may try with the new superoneclick. the most radical method is still flashing a firmware (so you'll lose all stuffs)
and yes, backup any saveable thing. although CWM saves all datas, more safety is more safe
Click to expand...
Click to collapse
Sorry bro,can't quite understand you here. Flashing firmware? For what? I'm just gonna root my phone right? No need to flash,right?
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Firecracker_RC said:
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Click to expand...
Click to collapse
I see a KJ4 link. Have you tried the KJ5 thread? It's the newest one for our 7310.
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Firecracker_RC said:
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Click to expand...
Click to collapse
I assume you're on a stock firmware. If I were you, I'd flash this specific version which is already rooted and has busybox as you can read in the OP. Also, flash the v2d version of the motley kernel and go here for the USB charging script and instructions on enabling. I know that last link is for the 10.1, but it is the one motley linked to in the v2b version changelog in his kernel thread.
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Firecracker_RC said:
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Click to expand...
Click to collapse
If you mean flashing a CWM package as the motley kernel, a file goes in the SDcard, you access the CWM Recovery and flash. That's a generic way BUT depending on what you will flash you may have to wipe. That's why I avoided altogether putting generic instructions regarding CWM packages in my guide (instructions may vary between ROM and kernels). Read your flashable package's thread carefully.
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Firecracker_RC said:
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Click to expand...
Click to collapse
No, lol. If you want to flash the motley kernel just follow that thread's instructions. I gave you the motley kernel thread link in a previous post. For kernels, no wipe is necessary, for ROMs, yes.
Ok, thank you. lol
Firecracker_RC said:
Ok, thank you. lol
Click to expand...
Click to collapse
You're welcome. Some people have the tendency NOT to wipe while flashing ROMs...yet complain later on the road. Always wipe when it comes to ROMs if you want to avoid issues. The only bugs you will experience are the ones that come with the ROM already. Better safe than sorry.
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Firecracker_RC said:
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Click to expand...
Click to collapse
No. ODIN clears everything (including kernels, ROMs and CWM Recoveries). Everything back to stock. I was just referring to flashing other custom ROMs (non-ODIN, i.e. CWM flashable) procedures. Stick to the thread instructions in your chosen ROM and you'll be fine. It's just that some don't follow instructions and due to that, they may experience weird bugs.
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Firecracker_RC said:
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
Click to expand...
Click to collapse
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Firecracker_RC said:
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Click to expand...
Click to collapse
I'm glad you made it!
Thanks for your support. If I ever have some extra change and feel like making a donation, I'll keep you in mind! Hey, where's your donation link anyway? Better get one!
nirogu325 said:
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Click to expand...
Click to collapse
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Firecracker_RC said:
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Click to expand...
Click to collapse
As for donations, nah it's ok, I am no developer. As for the suggestion, it was just that, a suggestion for next time. Keep that in mind. It will become a habit down the road.
Sent from my GT-P7310
nirogu325,
I'm back to do my clean wipe. I performed the wipe/data reset in nandroid and now it's saying there is an update from KJ5 to LA3. Do you still think the custom kj5 is better than the stock LA3? I'm wondering if I should just install the update, root, install the motley kernel and go from there...?
Hope you're well! I still think you should add a donate link...you don't have to be a developer, your assistance/guidance is equally helpful to the community.
While I'm waiting, I flashed http://forum.xda-developers.com/showthread.php?t=1375112 and then I noticed I have the old CMR so I downloaded your updated package: GTab89Files and I cannot paste a single file from that folder onto my tab. I can paste files from other folders, but this one I copy and when I go to paste the paste option is not enabled; if I drag I get a little red circle with a line through it. Any ideas as to why it's rejecting?
Hello. I am new to this forum. I did do searching before I came here. I am sort of a noob so sorry for dumb questions. I wanted an MIUI theme on my phone. I tried MiHome but it doesn't change the UI so I want to get the MIUI ROM on my phone but I wasn't sure how. I know you have to root your phone first, but I read somewhere that MIUI isn't compatible with different rooting procedures like CyanogenMod. If thats true, which one is it compatible with? Is it possible for me to get MIUI on my phone? I have an HTC Vivid (of course) with Android ICS 4.0.3. Can anyone provide me with a guide on how to do get MIUI on my phone, preferably a video with a step-by-step description (yes, thats how noobish I am). Also, what are the odds of me rooting my phone if I follow the steps exactly as told? Sorry for a ton of questions. To sum things up, I would like to get MIUI ROM on my phone but have no idea how. Any help would be greatly appreciated! Thanks!
menachemt said:
Hello. I am new to this forum. I did do searching before I came here. I am sort of a noob so sorry for dumb questions. I wanted an MIUI theme on my phone. I tried MiHome but it doesn't change the UI so I want to get the MIUI ROM on my phone but I wasn't sure how. I know you have to root your phone first, but I read somewhere that MIUI isn't compatible with different rooting procedures like CyanogenMod. If thats true, which one is it compatible with? Is it possible for me to get MIUI on my phone? I have an HTC Vivid (of course) with Android ICS 4.0.3. Can anyone provide me with a guide on how to do get MIUI on my phone, preferably a video with a step-by-step description (yes, thats how noobish I am). Also, what are the odds of me rooting my phone if I follow the steps exactly as told? Sorry for a ton of questions. To sum things up, I would like to get MIUI ROM on my phone but have no idea how. Any help would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
Alright....you need to do ALOT of reading...I only say that so you don't brick your phone...but here's some info as well as how to get miui
It doesn't matter how you root your phone, you can still flash any Rom...you don't even need to be rooted to flash roms
Cyanogenmod is not a rooting method, it is an aosp rom...you cam flash from cyanogen but our device doeant even have a cyanogenmod Rom (well there is one but it was discontinued...for now)
In order to get miui you will need to do the following:
1) unlock bootloader
2) get recovery
3) download miui onto your phone (can't be any miui...has to be one made for our phone...you can find it on rootzwiki.com)
4) flash miui
More detail:
In order to unlock bootloader and get a recovery I suggest using Hansen vivid toolkit that is stickier in the dev section...its the easiest most newb friendly way to unlock bootloader and get a recovery...for the most part all you do is plug in your phone and click a few buttons...here's the toolkit: http://forum.xda-developers.com/showthread.php?t=1498003
Sent from my HTC PH39100 using Tapatalk 2
mg2195 said:
Alright....you need to do ALOT of reading...I only say that so you don't brick your phone...but here's some info as well as how to get miui
It doesn't matter how you root your phone, you can still flash any Rom...you don't even need to be rooted to flash roms
Cyanogenmod is not a rooting method, it is an aosp rom...you cam flash from cyanogen but our device doeant even have a cyanogenmod Rom (well there is one but it was discontinued...for now)
In order to get miui you will need to do the following:
1) unlock bootloader
2) get recovery
3) download miui onto your phone (can't be any miui...has to be one made for our phone...you can find it on rootzwiki.com)
4) flash miui
More detail:
In order to unlock bootloader and get a recovery I suggest using Hansen vivid toolkit that is stickier in the dev section...its the easiest most newb friendly way to unlock bootloader and get a recovery...for the most part all you do is plug in your phone and click a few buttons...here's the toolkit: http://forum.xda-developers.com/showthread.php?t=1498003
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Well, thank you for replying! I was gonna mention I am using a mac and the file is a rar, then exe files. Is it ok if I use a program to run it in an app file or does this have to be done on windows? Thanks!
menachemt said:
Well, thank you for replying! I was gonna mention I am using a mac and the file is a rar, then exe files. Is it ok if I use a program to run it in an app file or does this have to be done on windows? Thanks!
Click to expand...
Click to collapse
Shoot...idk how to do it on a Mac sorry :/
Sent from my HTC PH39100 using Tapatalk 2
mg2195 said:
Shoot...idk how to do it on a Mac sorry :/
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
I guess I'm forced to use my slow PC. Hopefully it won't shut down in the process or else I'll be screwed. :/ Thanks again! I'll let you know if it works out if you want.
Just some ideas , if your pc is slow you can download and of the files you need on your phone then transfer them over to the pc , also if you download the tool kit you shouldn't need anything else but the Rom , if you get s off you will need to do a couple of things , but as mg said do some reading on this subject to kinda get an idea as to what your working with , make sure you kinda understand it so you don't brick your ph. Better safe than sorry .
Good luck and if you have questions there is a lot of good people here and would be glad to help.
menachemt said:
Hello. I am new to this forum. I did do searching before I came here. I am sort of a noob so sorry for dumb questions. I wanted an MIUI theme on my phone. I tried MiHome but it doesn't change the UI so I want to get the MIUI ROM on my phone but I wasn't sure how. I know you have to root your phone first, but I read somewhere that MIUI isn't compatible with different rooting procedures like CyanogenMod. If thats true, which one is it compatible with? Is it possible for me to get MIUI on my phone? I have an HTC Vivid (of course) with Android ICS 4.0.3. Can anyone provide me with a guide on how to do get MIUI on my phone, preferably a video with a step-by-step description (yes, thats how noobish I am). Also, what are the odds of me rooting my phone if I follow the steps exactly as told? Sorry for a ton of questions. To sum things up, I would like to get MIUI ROM on my phone but have no idea how. Any help would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
There are several good guides on here to help you root here is one of them:
http://forum.xda-developers.com/showthread.php?t=1416836
ronnie498 said:
There are several good guides on here to help you root here is one of them:
http://forum.xda-developers.com/showthread.php?t=1416836
Click to expand...
Click to collapse
Help! I managed to root my phone, which is good. I am currently using WCX. I am not sure how to flash the rom. I tried going to my internal sd card and installing the miui zip file from there. After it reboots my phone, an htc logo loads, then it takes me to some chinese. It has like big chinese words on top in red, then in the middle it has white words, and in between the white words, it loads from 0 to 100 but I have no idea what to do now. It just leaves me stuck on this page! Can anyone help me? Do I need to uninstall the rom then follow a correct process of installation or can I just do the correct process? Also, please don't redirect me to some page, because I did a lot of googling and I found one which would help me, but the site is down. I am sure it isn't a long process. This is what I did:
1. Manually put the zip file into my internal sd card.
2. Rebooted my phone to recovery.
3. Installed the zip file, which flashed the rom.
Is that correct? Can someone please help me! Thanks!
menachemt said:
Help! I managed to root my phone, which is good. I am currently using WCX. I am not sure how to flash the rom. I tried going to my internal sd card and installing the miui zip file from there. After it reboots my phone, an htc logo loads, then it takes me to some chinese. It has like big chinese words on top in red, then in the middle it has white words, and in between the white words, it loads from 0 to 100 but I have no idea what to do now. It just leaves me stuck on this page! Can anyone help me? Do I need to uninstall the rom then follow a correct process of installation or can I just do the correct process? Also, please don't redirect me to some page, because I did a lot of googling and I found one which would help me, but the site is down. I am sure it isn't a long process. This is what I did:
1. Manually put the zip file into my internal sd card.
2. Rebooted my phone to recovery.
3. Installed the zip file, which flashed the rom.
Is that correct? Can someone please help me! Thanks!
Click to expand...
Click to collapse
1. Manually put the zip file into my internal sd card.
2. flash boot.img via fastboot (The boot.img should be in the zip of the rom You have to flash the boot.img - aka the kernel)
3. Rebooted my phone to recovery. Wipe data, cache, dalvik cache, factory reset
4. Installed the zip file, which flashed the rom.
ronnie498 said:
1. Manually put the zip file into my internal sd card.
2. flash boot.img via fastboot (The boot.img should be in the zip of the rom You have to flash the boot.img - aka the kernel)
3. Rebooted my phone to recovery.
4. Installed the zip file, which flashed the rom.
Click to expand...
Click to collapse
I tried what you said. I am using the All In One tool kit that someone told me to use so I flashed the kernel (boot.img) through that, assuming it is fastboot. I then rebooted my phone to recovery and selected the zip file, it flashed it. I rebooted my phone and it still takes me to that chinese screen. Is there a different MIUI ROM zip file download? I used this one: androidfilehost.com/main/HTC_Holiday_Developers/rafyvitto/MIUI_ICS_V4/
Maybe a different file would work? Thanks in advance!
menachemt said:
I tried what you said. I am using the All In One tool kit that someone told me to use so I flashed the kernel (boot.img) through that, assuming it is fastboot. I then rebooted my phone to recovery and selected the zip file, it flashed it. I rebooted my phone and it still takes me to that chinese screen. Is there a different MIUI ROM zip file download? I used this one: androidfilehost.com/main/HTC_Holiday_Developers/rafyvitto/MIUI_ICS_V4/
Maybe a different file would work? Thanks in advance!
Click to expand...
Click to collapse
Let me do some checking will let you know shortly
ronnie498 said:
Let me do some checking will let you know shortly
Click to expand...
Click to collapse
I have no clue what I did. I just rebooted and some other stuff but now it works. I think it was the wipe that I did. Thanks for your help!
EDIT: I tried applying the Ultimate Iphone Theme v7.0 but it doesnt work. I go to themes and select it but it doesn't apply. I tried rebooting but it still doesnt work. I have the MIUI ROM on my phone. Why doesn't the Ultimate Iphone Theme apply? I really like it. Can anyone give me a step-by-step on how to install it because there are no good tutorials online. Thanks!
menachemt said:
I have no clue what I did. I just rebooted and some other stuff but now it works. I think it was the wipe that I did. Thanks for your help!
EDIT: I tried applying the Ultimate Iphone Theme v7.0 but it doesnt work. I go to themes and select it but it doesn't apply. I tried rebooting but it still doesnt work. I have the MIUI ROM on my phone. Why doesn't the Ultimate Iphone Theme apply? I really like it. Can anyone give me a step-by-step on how to install it because there are no good tutorials online. Thanks!
Click to expand...
Click to collapse
It's been a while since I used miui, but last I heard the themes in the miui theme chooser/downloader wernt compatible with miui...at least the majority wernt there was still quite a few that worked/partially worked
Sent from my HTC PH39100 using Tapatalk 2
With the ROM I used, since I am S-On (which I assume you are too since you did not do the wire jump thing from what I read) after you initially flash the boot.img file using fastboot, you need to flash the rom, which you said you did. Then go back in and reboot to bootloader, and flash the boot.img again. It may have been just specific to the Rom I used, but that is the instructions I followed for mine. I hope you made a nandroid before you flashed Miui in case you ran into these troubles....
Hi all, with the help of gregbradley, i have started to make a rom for the LT30a rogers version of the xperia T. so far it's going of I just need a little help figuring out the updater script as CWM gives me an error 0.
I replaced mione with gregs from his rom and it works. I have made a few adjustments and am in the process of test it now.
So if it's something obvious maybe someone can share what causes the kitchen to not create the right updater script. I have figured out I need the amend script so hopefully my new one will work.
But my main reason for this post is, I need some help to get a flash able ftf file of the .195 kernel from the rogers ftf file in the downloads section. i found DooMLoRD's tools and it looks like you need a linux box to run the tools. My only linux box is a headless server that wont work and I'm hoping someone could create the kernel.ftf for me.
Just asking
HackitZ
As for the rom, i'm planning on removing all 8 rogers apps (if you want them you can add them back from the market), deoxed, add some other gui tweaks like the small buttons. and maybe more.
hackit said:
Hi all, with the help of gregbradley, i have started to make a rom for the LT30a rogers version of the xperia T. so far it's going of I just need a little help figuring out the updater script as CWM gives me an error 0.
I replaced mione with gregs from his rom and it works. I have made a few adjustments and am in the process of test it now.
So if it's something obvious maybe someone can share what causes the kitchen to not create the right updater script. I have figured out I need the amend script so hopefully my new one will work.
But my main reason for this post is, I need some help to get a flash able ftf file of the .195 kernel from the rogers ftf file in the downloads section. i found DooMLoRD's tools and it looks like you need a linux box to run the tools. My only linux box is a headless server that wont work and I'm hoping someone could create the kernel.ftf for me.
Just asking
HackitZ
As for the rom, i'm planning on removing all 8 rogers apps (if you want them you can add them back from the market), deoxed, add some other gui tweaks like the small buttons. and maybe more.
Click to expand...
Click to collapse
The issue with the error 0 you are having is because the updater script doesn't know what to do with a LT30a as there is no edify settings for it i believe. Take a look in the kitchens tools/edify_defs folder. There you can open the LT29i or LT22i to see what needs to be setup for LT30a though you will probably have to change the mount points to reflect the correct ones for the LT30a. Once you have that setup the updater script should work okay (obviously after you rebuild the rom)
Were you able to get a stock ftf for the .195 rogers rom? if so you can just exclude what you don't want/need when flashing it.
Spectre51 said:
The issue with the error 0 you are having is because the updater script doesn't know what to do with a LT30a as there is no edify settings for it i believe. Take a look in the kitchens tools/edify_defs folder. There you can open the LT29i or LT22i to see what needs to be setup for LT30a though you will probably have to change the mount points to reflect the correct ones for the LT30a. Once you have that setup the updater script should work okay (obviously after you rebuild the rom)
Were you able to get a stock ftf for the .195 rogers rom? if so you can just exclude what you don't want/need when flashing it.
Click to expand...
Click to collapse
thanks Spectre51,
I have already figured out the error 0 and my Rom has been running smooth for 24 hours now. I just want to wait tell i can figure out how to update the kernel back to the 195 version. Hopefully someone can share a way of doing it with out linux, i have ubuntu on a HTPC and Debian on a headless server. I'm not sure if i want to go through adding linux to another machine. But I might have to in the end.
Unless there is a windows way to do it. the thread i found was here is this the right thread?
hackit said:
thanks Spectre51,
I have already figured out the error 0 and my Rom has been running smooth for 24 hours now. I just want to wait tell i can figure out how to update the kernel back to the 195 version. Hopefully someone can share a way of doing it with out linux, i have ubuntu on a HTPC and Debian on a headless server. I'm not sure if i want to go through adding linux to another machine. But I might have to in the end.
Unless there is a windows way to do it. the thread i found was here is this the right thread?
Click to expand...
Click to collapse
Flash just the kernel in flashtools. Did you end up creating a LT30a file for the edify_defs folder?
Sent from my Sony Xperia™ ion
---------- Post added at 07:13 PM ---------- Previous post was at 06:18 PM ----------
Also did you have any issues with wifi not turning on after you created your rom? Can't get mine working and I can't get my updater script to work either. Keep having to copy gregbradleys over to my zip once it's created. I compared the two and they aren't even close as far as what I found is put in there so I don't know what's wrong.
Sent from my Sony Xperia™ ion
Spectre51 said:
Flash just the kernel in flashtools. Did you end up creating a LT30a file for the edify_defs folder?
Sent from my Sony Xperia™ ion
---------- Post added at 07:13 PM ---------- Previous post was at 06:18 PM ----------
Also did you have any issues with wifi not turning on after you created your rom? Can't get mine working and I can't get my updater script to work either. Keep having to copy gregbradleys over to my zip once it's created. I compared the two and they aren't even close as far as what I found is put in there so I don't know what's wrong.
Sent from my Sony Xperia™ ion
Click to expand...
Click to collapse
I'm using an older version of java on my machine so the kernel tools is not working. keeps telling me to install java. (really cant update java as it screws another app i use and need). so i'm still working to extract the kernel from the kernel.ftf file. :crying:
After a few hours reading looks like for the 2012 xperia line up we need to use some tools in Linux just came across this thread. So with a wife two boys and a full time job looks like this is being put on the back burner tell the weekend and my laptop will have to be the sacrificial machine and dual boot Linux again. all this and Christmas in two weeks.......L0L
Thanks for the help guy's.
(updater-script) If i remember correctly it was an issue about amend and not? I'll have to go back and look. Ok just remembered i had an issue with the mounts in mine.