Database Develop

[Q] how to remove clockword mod recovery

Hi all
This problem that I have is pissing me off so much. I rooted my phone and then unrooted it, and then my Android Market icon was missing. Now, whenever I want to do a factory reset, the phone goes back to ClockworkMod Recovery every single time. I want to get rid of this CMR. Also, I've tried to stock original rom on my phone but it does not work at all. What is happening? My phone is LG Optimus 2x P990. But I always get this error where I can't apply the DLL file. This really annoying me right now. I've tried everything and NOTHING works. I regret rooting my device.
Please help me thanksss
Lena

Here's howto remove the ClockWork Recovery Mode:
http://forum.xda-developers.com/showthread.php?t=1021554
You can flash the original image using SmartFlash.
Get your original Firmware image from here. The instructions for SmartFlash are here

how to flash the zip
sorry I am completely new to this. How do I apply the zip? Do I boot into recovery mode and install zip from there? I have done this with other zip files before and it always ended with:
'installation aborted'
im trying it now, but its stuck at:
'Restoring stock recovery image'

smart flash
smart flash doesn't work for me. I always get this time out error.. I really don't know what to do now. The recovery stock file did install but then I chose 'reboot system now' in CWM and it got stuck with the LG logo. Now, it's back to ClockWork Recovery Mod again!! i don't understand. Please help.. Many thnks

what type of error?
your device-manager on your pc recognizes your 2x, when you connect it as described in the instructions?

THis is the error:
00:00.0 Sec ownload Start...
00:07.5 Sec :We can't communicate with specific port
and now, I can't start my phone. It gets stuck on LG logo. I tried the remove CWM method, it worked but when I rebooted my phone, my phone would not start at all. P. Please help.

yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx

Does the COM port get detected automatically when you plugin the phone ?

pinkdiva said:
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Click to expand...
Click to collapse
Same with me. Go on trying at some point it will work. It happens with me everytime i flash with smartflash. Myself also waiting for a definite solution to this problem. i think the problem lies with usb drivers. I also tried with taking out card and sim but cannot pinpoint the problem. Any successful flasher may upload the drivers. Moreover i also disabled programmes like antivirus etc running in background. Waiting for a more definite problemfree flashing solution.

I think, install drivers to smartflash, no other drivers, and later smartflash.
Enviado desde mi Optimus 2X usando Tapatalk

SD card corruption !!

I want to know why this error occurs !!?
"Can't mount mmcblkp01"
basically i've already been into this bootloop problem but it came up again and was watching this thread so i need to clear off why does this happen and why doesn't we have Perfect-FIX !?
and this time i can't have any recovery options (it takes much time to boot twice and after that the 3-button combo the screen displays random static screen like old TV's!! :/ ) but i can get acces to download mode!
Help plz!

Tried this thread ,I can't get this one-click unbrick work it always says..heimdall must be installed even though i copied latest heimdall v1.3 too!!
can i get any help please ?

Touchscreen doensn't work anymore after root

Hello there,
i've rooted my GC with newest 4.1.2 Android and all went fine. Then i wanted to use the cool init.d Script, which makes it possible to set the extSdCard storeage as 'internal' and the internal as external Storeage, to get more space for a lot of Apps.
But for this init.d script i needed to use a compatible kernel. So thinking, the GalaxyCamera HW is almost the same like from the Galaxy S II Phone. i decied to use this tut: http://forum.xda-developers.com/showthread.php?t=1772234 to download the init.d script and siyah- kernel. getting this things into the Camera i should use ClockWorkMod.
And there the Problem starts: In ClockworkMod install-tool i sayed "yes" to install it for a Galaxy S III.. humm, device restarting into recovery and Screen flashes with disorientated GalaxyCamera Logo und went blank afterall... i rebootet and all went fine, but recovery was "corrupted" (with my luck i didnt make a backup in ClockWorkMod ROM Utility on Android... ( )
So i decided to start over and started to flashing (idont now why) the root- Restore file from Chainfire for the GalaxyCamera again. Recover Mode works fine again, but NOW on normal boot my Touchscreen doenst react anymore.
After trying with several Stock recoveries, even with 4.1.1 and so on an re- Routing.... issue still persists.. ( Can anyone help me, or did i just killed the Touchscreen Controller with this Action??

Do you try a hard reset, you probably can do it from recovery mode, but not sure.
Maybe he solve your issue ?

I've already tried. But thank you for your tip!
The Problem is (i guess) that ClockWorkMod or Chainfires Root, locked up some file- permissions and the Touchscreen- driver cant load into Memory. If it where possible for me to repartition the device, all locked Data gets wiped and a fresh Andoid flashed back to NAND . I tried this with Adam's Pit- File in Odin or Heimdall several Times with differen OS'es. No success.
Yesterday i Sent the camera in for repair to a Samsung Service Provider. I Hope they will fix it. Small problem: i couldnt reset the Flashcounter with an 'defective' Touchscreen! ... I hope they would not recognize my 20 custom OS restores!
I will inform you if my lovely GalaxyCamera gets fixed!

WEissbr0t said:
I've already tried. But thank you for your tip!
The Problem is (i guess) that ClockWorkMod or Chainfires Root, locked up some file- permissions and the Touchscreen- driver cant load into Memory. If it where possible for me to repartition the device, all locked Data gets wiped and a fresh Andoid flashed back to NAND . I tried this with Adam's Pit- File in Odin or Heimdall several Times with differen OS'es. No success.
Yesterday i Sent the camera in for repair to a Samsung Service Provider. I Hope they will fix it. Small problem: i couldnt reset the Flashcounter with an 'defective' Touchscreen! ... I hope they would not recognize my 20 custom OS restores!
I will inform you if my lovely GalaxyCamera gets fixed!
Click to expand...
Click to collapse
Dude, did you get your camera back?? I made he same mistake just a couple of hours ago.. I am feeling so depressed, I dont know what to do.
Did they say anything about the flash counter?

me too
I have had this problem as well. My camera has no touch on the screen after rebooting. I saw it flick and lock and then I tried to re-flash the rom etc, but it didn't help.
Sent to Samsung and they are saying that the motherboard and screen have to be replaced at a cost of $350. They are seeing if they can repair under warranty, but it doesn't sound too hopeful.... Perhaps, I will give up on my Galaxy Camera. I am not going to pay $350 to have the item repaired. I didn't know if it was a software fault or a hardware failure. I think it really should be a warranty issue....
Anyhow, I guess clockwork mod can really wreck things up..... Anyone, found a way to fix this issue? Why didn't the default Samsung ROM flash and factory reset fix the issue if it is supposedly software?

WEissbr0t said:
Hello there,
i've rooted my GC with newest 4.1.2 Android and all went fine. Then i wanted to use the cool init.d Script, which makes it possible to set the extSdCard storeage as 'internal' and the internal as external Storeage, to get more space for a lot of Apps.
But for this init.d script i needed to use a compatible kernel. So thinking, the GalaxyCamera HW is almost the same like from the Galaxy S II Phone. i decied to use this tut: http://forum.xda-developers.com/showthread.php?t=1772234 to download the init.d script and siyah- kernel. getting this things into the Camera i should use ClockWorkMod.
And there the Problem starts: In ClockworkMod install-tool i sayed "yes" to install it for a Galaxy S III.. humm, device restarting into recovery and Screen flashes with disorientated GalaxyCamera Logo und went blank afterall... i rebootet and all went fine, but recovery was "corrupted" (with my luck i didnt make a backup in ClockWorkMod ROM Utility on Android... ( )
So i decided to start over and started to flashing (idont now why) the root- Restore file from Chainfire for the GalaxyCamera again. Recover Mode works fine again, but NOW on normal boot my Touchscreen doenst react anymore.
After trying with several Stock recoveries, even with 4.1.1 and so on an re- Routing.... issue still persists.. ( Can anyone help me, or did i just killed the Touchscreen Controller with this Action??
Click to expand...
Click to collapse
I had the same problem dude, got the touchscreen replaced at the service center.
New touchscreen works totally fine.

Hi;
I'm using samsung galaxy camera. I wanted to root with odin. But I selected bootloader instead of PDA wrongly, Then I selected start. My Camera rebooted and not opened. Just showing "samsung galaxy camera" logo.
If somebody help me, I will happy.

Flash stock rom
7dervish said:
Hi;
I'm using samsung galaxy camera. I wanted to root with odin. But I selected bootloader instead of PDA wrongly, Then I selected start. My Camera rebooted and not opened. Just showing "samsung galaxy camera" logo.
If somebody help me, I will happy.
Click to expand...
Click to collapse
You should be able to flash the stock samsung standard rom. It will update everything including the bootloader. Haven't had this problem, but this solution seems logical. Download the full rom and flash with PDA option.
Good luck.

ant75 said:
You should be able to flash the stock samsung standard rom. It will update everything including the bootloader. Haven't had this problem, but this solution seems logical. Download the full rom and flash with PDA option.
Good luck.
Click to expand...
Click to collapse
Thank you,
I flashed stock rom. SGC opening but touchscreen did not work. Just otg cable with mouse.
I will send to samsung service on monday

7dervish said:
Thank you,
I flashed stock rom. SGC opening but touchscreen did not work. Just otg cable with mouse.
I will send to samsung service on monday
Click to expand...
Click to collapse
There is no solution for touchscreen problem. You just give service your camera and they change touchsreen. Cause it's a hardware problem

Jeah it definitively was an HW Problem. Got a New Touchscreen and all works fine
Gesendet von meinem GT-I9100 mit Tapatalk 2

A pity, read the solution, because I'm at the same point

[Q] Pls help - Error : movi-write card_status:2

Dear Team,
My S3 I8190 (Unrooted) become read only. I cant Install or uninstall any apps.
I can't even download any apps. Can't make any changes in settings. Even if i make any changes, the phone gets restarted and all the things are back again.
Cant boot into recovery. Download Mode is working.. but cannot flash any kind of roms using odin.its shows error "movi-write card_status:2".
i tried WIPE_I8190.tar.. and flasf twrp recovery through Odin..but nothing works.
Please Please Please help me ... I just need to reset my phone to factory mode.

abshad said:
Dear Team,
My S3 I8190 (Unrooted) become read only. I cant Install or uninstall any apps.
I can't even download any apps. Can't make any changes in settings. Even if i make any changes, the phone gets restarted and all the things are back again.
Cant boot into recovery. Download Mode is working.. but cannot flash any kind of roms using odin.its shows error "movi-write card_status:2".
i tried WIPE_I8190.tar.. and flasf twrp recovery through Odin..but nothing works.
Please Please Please help me ... I just need to reset my phone to factory mode.
Click to expand...
Click to collapse
Are you on Official or does it say custom? How many binary counts? I think the eMMC chip is damaged since mine had a similar problem and it had bricked on CM11 so it couldn't even boot! When I trying to restore the stock firmware it showed 'movi-write card_status:2' in red letters

Same thing with me, any success
Pls i need answer, i try follow this steps http://forum.xda-developers.com/galaxy-s3-verizon/help/qa-unbrick-soft-bricked-galaxy-s-iii-t2914031
but without success, pls expert guys, help us

Same problem :'( waiting for months who can solve my problem too, this is my thread http://forum.xda-developers.com/galaxy-s3-mini/help/factory-reset-cwm-t3230792

bootloop,no recovery can be installed from odin

i'll make it short
One night,i've used my phone,and before going to sleep(phone still working),i left it to charge.(That's at about 11pm).The morning i wake up,phone cannot boot in recovery nor in download.It was like dead.But i have left it to charge for some hours then charging animation came back,then phone could boot again,including download mode but not recovery(linegeos 14.1).Until today,i have tried to flash custom recovery,stock recovery,wipe file to wipe data and cache,tried to install cm12.1,but none of them worked,still stuck on bootloop.If i recall,the night i used my phone last,i tried to use lucky patcher to get unlimited coins on dream league,but with play protect,they warned me that google would give warning,but i did not do anything.After all the flashes including recovery and the rom that failed,i ticked the nand erase in odin but seems like nothing changed.And now i'm out of options,if someone could really help me please,this is the only phone i've got.Phone can boot fine,but not in recovery and it will not install idk why,please help me...
something i've seen in download is that after flashing recovery or wiping data,in the place of current binary,it writes something like sdcard write status:2(7) or something like that.

does any of you know the problem?

no answer?
pls help me

i have the same problem is so sad

so there's no fix?

I have the exact same problem in my i8190, despite of being totally stock. I'm trying to flash stock rom, stock recovery, custom recovery, custom rom, something... and nothing happens, Odin says PASS but it seems to be like there is no memory to write on. I'm thinking it could be some hardware issue :'(

then there's nothing to do...
so sad

If its software you could use this: https://androidfilehost.com/?fid=24269982087010584
Flash it through odin

IkerST said:
If its software you could use this: https://androidfilehost.com/?fid=24269982087010584
Flash it through odin
Click to expand...
Click to collapse
this for i8190L not I8190
do you have any files for I8190?

Ioty1705 said:
this for i8190L not I8190
do you have any files for I8190?
Click to expand...
Click to collapse
My bad, search in this folder for your device http://androidfilehost.com/?w=files&flid=38726

tried to install any software but does not work.I think it's a hardware issue,i'm not sure though!!
does any of you know what the problem means?

Hi everyone, I am having a similar problem. Last month I have tried to install novafusion RR distribution to s3 minI because it was rebooting all the time, but since I didn't liked it I went back to the original firmware. A few days ago my cell died, it wasn't turning on. The guy in the repair shop told me it wasn't the battery... the nextday it was turning on, buy keep rebooting. I bought a new original battery, charged it but still the same problem.
I tried to install twrp and central recovery via Odin but nothing works, it freezes on the "Samsung Galaxy s3 mini" or it reboot..
I would like to know if there is something that I can do, because I want to backup some contacts that were saved in the phone memory, sms and the last whatsapp chat, for some reason the last automatic one is from january...
Any ideas?