1st: since this is my first post:
Hi! I'm a 25-year-old guy from germany, study applied computer sciences, work at my Bachelor-Degree atm & work as a developer at an E-Commerce-Agency.
2nd: my problem:
I own a P990 and wanted to flash a new baseband. I have a new Laptop with Windows 8 x64. So I installed the B2CAppSetup, downloaded the drivers for the P990 and plugged in my phone (remove battery, plugin with volume down pressed .. you know the deal). Windows searches for drivers and BĂ„M .. Bluescreen
This was reproducible so I uninstalled the LG Software and installed the LGUnitedMobileDriver 3.8.1. Still BSOD
The Bluescreen-Message was of the "IRQ_NOT_LESS_OR_EQUAL"-type and was caused by "usbehci.sys".
Is the driver incompatible to Windows 8? Is there a workaround (aside from uninstalling W8)?
Previously with W7 everything worked fine..
Thanks in advance for your help
Check the developers section for the all in one tool kit by Spyrosk....you have the drivers in it and the way to install for windows 8
Will work then....
Sent from my LG-P990 using xda premium
EDIT: it is a tool kit....thanks to the auto correction in Keyboard....it became roll kit....lol
Related
Whenever I try to connect my Lg Optimus Black to the PC Suite it isn't recognised...
Any ideas?
TomByrne94
What operating system are you using on your PC? I wasn't able to correctly install the drivers under Vista, I've only managed to get the thing running on an XP system.
Windows 7, i've installed the drivers a few different times now and they seemed to work each time...
Problem resolved.
TomByrne94 said:
Problem resolved.
Click to expand...
Click to collapse
Any chance of sharing the solution, in case any other person is having the same issue and lands on this page after a search? Thanks!
I just reinstalled the drivers a load of times and made sure that mass storage mode wasn't enabled...
I just installed windows 8 Consumer preview. I had my Galaxy note working before with the USB connection on windows 7, but now after windows 8 is installed over 7 I have a problem connecting my Galaxy note with the computer. It seems that it is an MTP problem or something went wrong after windows eight is installed. I have read on a Microsoft MSDN post that the mtp protocol is not yet supported with windows 8. If there is something that I can use to work around that It would be appreciated.Please help.
Sent from my GT-N7000 using XDA
Try installing Droid Explorer on your PC.
All of us on ICS Roms have the same USB connection problem, and this little program is the solution. It recognizes our Notes automagically without Windoze drivers.
Don't know if it'll work for you, but it's worth a try.
I will do that. But would it make a difference if I still have GB on my note? Thanks
Sent from my GT-N7000 using XDA
I had this problem as well, easiest solution is to put the Note in USB Debugging mode, and it will connect with Windows 8 fine.
You can find USB Debugging mode in Settings -->Applications --> Development.
weird, I have a similar problem : I want to install CWM, but "adb devices" doesn't see any devices....I have "USB debugging" checked, I tried to install samsung drivers, Droid explorer, Kies won't install, and it is not recognizes as a device by Windows. Strange thing is, if I remember correctly, I successfully flashed a stock firmware using PC Odin. Any ideas ?
Windows 8 Desktop, ICS Note. Everything's working fine here. Haven't had to install anything on either end to get it to work.
I do have USB debugging enabled though, as suggested above.
i am having the same problem. at 1st win8 detects it and i always charge on it but lately i noticed it does not detect. i went to my home pc win 7 64bit which is detecting before but now i did not detect also. i did everything kies. driver of droid but still the same problem. Weird yet still it charges.
Sent from my GT-N7000 using Tapatalk
It worked a few times after that when I installed the google driver but now I have the same problem with both windows 7 ultimate 64bits and windows 8 release preview. It is charging but not detected. I also tried different cables with no progress. I sudpect it could be that one of the pins of the note connector is not OK. Can anyone help please
Sent from my GT-N7000 using XDA
Hey Gang!
Ok, Here's the problem, No matter which rom I run, I cannot get the ADB Drivers to load on windows 8 PRO. Used to run just fine on Win7 SP1, matter of fact it would install itself as soon as I plugged in the phone along with all the other Samsung usb drivers, now all i get is something called "Samsung File-CD Gadget USB Device" and it doesn't even install it as a phone. Any Ideas?
There have been issues from mobile driver to odin & now up to your post on win8. Donno what's the problem but it seems that what worked on win7 flawlessly for phones doesn't seem to be working equally well on win8. I haven't been able to find the solution too. Tough luck, use win7 itself. Can't help . Hope some one does...
Sent from my GT-S5830 using xda premium
Hello everybody, I have a problem with my i9000 and my laptop, I today i dicided to format my laptop and install win 7, it's not the first time I've done it, but this time I haven't been able to successfully install the drivers to connect the laptop and the phone.
I believe that I try it all, download keys, download samsung driver for mobile phones x86, x64, windows update, tried to find the driver using the system32 folder from another pc where the i9000 is properly detected, and noting seems to work.
The only thing i haven't tried is to change the rom, but if the phone was correctly recognised by the laptop yesterday, this shouldn't be the problem, but currently i'm using SuperNexus 2.0 rom.
If any one have any ideia of what to do next i'm willing to try it out.
Best regards to everyone
Solved, i don't know why, but when i enable the usb tethering, it instaled all the drivers correctly.
Hi All
I am having issues upgrading my mother in laws lg970 to ICS i have tried multiple drivers/ways
all with same issue when phone reboots in to s/w upgrade mode my computer stops being able to detect it comes up with unknown device. Machine has multiple reboots before/after uninstall/installing drivers
I have tried the tons of guides around the place, tried using LGMobile Support Tool, KDZ & Smartflash all with same issue, Computer detects phone fine when its on, but as soon as i go in to S/W mode no luck. I have tried LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.1_2 & LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1, the LG software downloads LG United Mobile Driver 3.7.2.0
(havin't had this much issue doing any of my samsung phones, or acer tablets)
Anyone got any ideas
Thanks
I also often get this problem.
After searching around, I found this step, it works for me
redgolum said:
After 2 day on this @"#[email protected]# phone, I find a solution work only on widows 7:
With the usb recognition I succed with this protocole,
1) Uninstall the Lg driver
2) Install the driver with B2C
3) Put the phone in S/W mode with the battery windows will say that it's not recognized,
4) Unplug the phone It will stay on S/W mode
5) Reboot Windows 7, and as soon as the desktop finish to load, plug your phone
And miracle it's work. Sometime you need to do it 2,3, or 10 times.
Click to expand...
Click to collapse
Try from step 3 first. If it doesn't work, repeat from step 1
If it still doesn't work, do this first, then repeat above prosess
*note (base on my experience):
- step 5, I plug it when the shortcut in desktop appear
- works in windows 7 and windows 8
t0g3 said:
I also often get this problem.
After searching around, I found this step, it works for me
Try from step 3 first. If it doesn't work, repeat from step 1
If it still doesn't work, do this first, then repeat above prosess
*note (base on my experience):
- step 5, I plug it when the shortcut in desktop appear
- works in windows 7 and windows 8
Click to expand...
Click to collapse
Yeah i came across that ealier given that a go multiple times with out any luck. Also tried getting it to work on a windows 7x64 laptop with no luck, install the drivers and it does not find it in s/w update mode.
AW: [Q] Issues drives Software Update mode
If you use only the original LG driver it will only work with a 32bit Windows. To make it work with a 64bit Windows you need to use a extra SW. I think it's call something like enabler, you find it here somewhere.
Sent from my LG-P970 using xda app-developers app
SaschaKH said:
If you use only the original LG driver it will only work with a 32bit Windows. To make it work with a 64bit Windows you need to use a extra SW. I think it's call something like enabler, you find it here somewhere.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
nope, I use windows 7 and windows 8 64bit, both works without any extra SW.
http://csmgdl.lgmobile.com/swdata/U...bileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.zip
Windows enabler is used to enabling button/checkbox that disabled on a program