I have a p880 with v20a EUR-XXX Unlocked Bootloader and I even had Root but for some reason in needed to reflash v20a and now if I try to root it says: Error: devicenot found. But only with the command adb sideload Please help me.
Driver issue or you did something wierd to recovery. Open adb and type "adb devices", if no device ID shows up its the drivers. If not flash rom one more time and try
Sent from my rooted P880
reboot to recovery (hold down power and volume down till it vibrates). then select apply from adb and apply the sideload command.
on linux you have to enable usb access for adb and fastboot.
maybe try another usb port. helped me alot of times at windows
Gesendet von meinem LG-P880 mit Tapatalk 2
gordon0001 said:
reboot to recovery (hold down power and volume down till it vibrates). then select apply from adb and apply the sideload command.
on linux you have to enable usb access for adb and fastboot.
maybe try another usb port. helped me alot of times at windows
Gesendet von meinem LG-P880 mit Tapatalk 2
Click to expand...
Click to collapse
Already tried but not working at my win 7 PRO
deownagee said:
I have a p880 with v20a EUR-XXX Unlocked Bootloader and I even had Root but for some reason in needed to reflash v20a and now if I try to root it says: Error: devicenot found. But only with the command adb sideload Please help me.
Click to expand...
Click to collapse
Turn Off the phone, take out the battery for a while and put it back, vol- and power button to enter in recovery and try again
Sent from my LG-P880 using xda app-developers app
Okay gonna try.
RuedasLocas said:
Turn Off the phone, take out the battery for a while and put it back, vol- and power button to enter in recovery and try again
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
So I'm gonna try this at the Official v20a Eur-xxx I hope it works.
deownagee said:
So I'm gonna try this at the Official v20a Eur-xxx I hope it works.
Click to expand...
Click to collapse
and it's error device not found :S
deownagee said:
and it's error device not found :S
Click to expand...
Click to collapse
You can boot in android recovery? pressing vol- & power button?...
Remember that first you must select on the phone "apply update from ADB" and confirm, only after the phone
be waiting for the package, you should double-click in the batch file named "root". Use only the files from the downloaded folder.
Don't open any cmd window to use it like before.
Thank's everyone for all now it's Finally rooted!
deownagee said:
Thank's everyone for all now it's Finally rooted!
Click to expand...
Click to collapse
hello! Could you tell me which method you've performed for rooting device?
I had the same problem and I can't untie the knot!
Related
Guys, How I change this message to logo Motorola or deactivate it? My bootloader is unlocked There are some zip or files to fix this? thx!!
Didn't use the search?
-> http://forum.xda-developers.com/showpost.php?p=36363875&postcount=71
Man dont work with CMW. "INSTALATION ABORTED" DONT INSTALL THIS ZIP. HOW INSTALL IT?
AW: Warning Message
Extract the zip, connect the i with usb debugging enabled and run the bat file for the desired Logo (locked/unlocked)
Sent from my XT910
HSD-Pilot said:
Extract the zip, connect the i with usb debugging enabled and run the bat file for the desired Logo (locked/unlocked)
Sent from my XT910
Click to expand...
Click to collapse
Sorry I didnt understand... Where is bat file? desired logo?
Here you go...Extract the folder onto your desktop, install the drivers if you haven't already, run bat file and you'll have a locked logo on your boot screen.
free2live said:
Here you go...Extract the folder onto your desktop, install the drivers if you haven't already, run bat file and you'll have a locked logo on your boot screen.
Click to expand...
Click to collapse
dont work. The message continues in my phone.
landeiro said:
dont work. The message continues in my phone.
Click to expand...
Click to collapse
Do you have usb debugging enabled? I'll check it tonight when i come back from work to see if made a mistake
Sent from my XT890 using xda premium
Yep. Depuration Usb Actived.
Enviado de meu XT890 usando o Tapatalk 2
landeiro said:
Yep. Depuration Usb Actived.
Enviado de meu XT890 usando o Tapatalk 2
Click to expand...
Click to collapse
Do you get any error message?
Sent from my XT890 using xda premium
free2live said:
Do you get any error message?
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
no error
What is the version of your firmware?
free2live said:
What is the version of your firmware?
Click to expand...
Click to collapse
8.7.1I-110_SML-20_Brasil_BR_SIGNED_SLATAMUnlk_USASMI01RETBRLA01B.0R_SCPNMINIIRETBRLA_P024_A031_CFC_fb.xml.zip
landeiro said:
8.7.1I-110_SML-20_Brasil_BR_SIGNED_SLATAMUnlk_USASMI01RETBRLA01B.0R_SCPNMINIIRETBRLA_P024_A031_CFC_fb.xml.zip
Click to expand...
Click to collapse
You mean the updated version. That's probably it. I have dig into it deeper, but I'm not sure we can flash the locked logo on this version due to different security check
Sent from my XT890 using xda premium
I want found in HTC MANIA and working 100%
landeiro said:
Guys, How I change this message to logo Motorola or deactivate it? My bootloader is unlocked There are some zip or files to fix this? thx!!
Click to expand...
Click to collapse
Only ICS
If you mean the caveat that you unlocked bootloader, use the information to a htcmania forum, and as if you can not make a link to there without censor me,
is simple, get files
1. - Fastboot.exe
2. - logo_signed (must be obtained from the firmware, exploring the zip file)
sorry for my bad English
Donwload files
http://db.tt/tak1LsuU
note: logo_signed file is of the firmware: Brasil.en.BR
Procedure
1. - Put the downloaded files in a folder in the root "C" on your pc, (I call this folder Android for example)
2.- Put the phone in fastboot mode (power button and Vol - squeezing them a few seconds until the screen fastboot mode) and connect with USB the phone to pc
3.- Opening a cmd screen, we stand there, I'm in cmd C:\Android\
4. - cheking with command fastboot devices
5. - Performed the command fastboot flash ulogo logo_signed
6. - Conducted after ending command fastboot reboot and that's it
7.- enjoy
Warning: only share what I see written on a forum and I served, so I do not take responsibility for any damage this may cause to your phone
Hey all im using note n7000 JB recently updated im trying to root my device with one click root but couldnt get the output. My home button is not working. If there are any other ways to root please help me out of this.
Thanks in advance...
Read this useful thread : http://forum.xda-developers.com/showthread.php?t=1329360
its not working
qnt said:
Read this useful thread : http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
ive tried all of them but no use:crying:
prdwy said:
ive tried all of them but no use:crying:
Click to expand...
Click to collapse
The easiest method is flashing a kernel including root associated to your ROM.
The Philz kernel is a good one, and nearly stock kernel with user friendly added CWM.
Can you boot into recovery? Check with adb if you can boot to recovery using
adb reboot recovery command.
Sorry but I'm not familiar with adb can you guide me through.?
Sent from my GT-N7000 using XDA Premium App
prdwy said:
Sorry but I'm not familiar with adb can you guide me through.?
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Check these links for comprehensive guide:
http://forum.xda-developers.com/showthread.php?t=2141817
and
http://forum.xda-developers.com/showthread.php?t=2265006
Edit: try the volume up+Home button(center button)+ power button, hold them together for few seconds and you should see stock recovery..
Edit: sorry just read again and found that your home button is not working
In settings developer menu enable usb debugging and then connect to pc. Install android sdk or adb tools from Google. Then in the adb folder there run command prompt and
adb devices - this should show device serial. If yes
Adb reboot recovery will put the phone in recovery mode.
i use this method to root my GN7000 international version http://forum.xda-developers.com/showthread.php?t=1886460
Hello!
prdwy said:
Hey all im using note n7000 JB recently updated im trying to root my device with one click root but couldnt get the output. My home button is not working. If there are any other ways to root please help me out of this.
Thanks in advance...
Click to expand...
Click to collapse
This is my first post on xda! Great to be here!
Back to topic:
Have you tried ExynosAbuse? It is a really easy process:
Exynos Abuse xda thread
Greetings, Paco
Exploit doesnot work on JB roms
result
nokiamodeln91 said:
In settings developer menu enable usb debugging and then connect to pc. Install android sdk or adb tools from Google. Then in the adb folder there run command prompt and
adb devices - this should show device serial. If yes
Adb reboot recovery will put the phone in recovery mode.
Click to expand...
Click to collapse
Failed to set prot mask <inappropriate ioctl for device>
Hi,
I tried to root my LG Optimus 4x HD (p880) running Android 4.1.2 JB today. Unfortunately, it all came down to this:
adb sideload superuser.zip
error: closed
Click to expand...
Click to collapse
I tried using both of these guides:
http://forum.xda-developers.com/showthread.php?t=2230934
http://forum.xda-developers.com/showthread.php?t=2180688
I also tried to do adb usb before doing adb sideload with no success. I also tried to kill and restart the adb daemon many times. Then I tried with different adb versions and on Linux too, no success. USB Debugging had to be enabled for the device to get recognized at all by adb.
Can anyone help me? Or can anyone please tell me how to get more debug output?
Cheers,
Niels
I had the same problem on my Galaxy R and have read it to be wrong on other devices as well. I finally ended up using TWRP which had this working. Your situation is different though. Did you try to run it with administrative privileges/root access?
oticshe was
Adam77Root said:
I had the same problem on my Galaxy R and have read it to be wrong on other devices as well. I finally ended up using TWRP which had this working. Your situation is different though. Did you try to run it with administrative privileges/root access?
Click to expand...
Click to collapse
Yep, always the same error message.
Okay, nevermind, apperently I'm too stupid to read, when it said, I sould power on while holding the volume down key.
Sorry, folks!
Always use "adb devices" before to check your device are online
Sent from my LG-P880 using Tapatalk 2
Have you entered recovery and chose "apply update with adb"? If you have maybe its a driver issue
Sent from my LG-P880 using Tapatalk 4 Beta
Run "adb usb" before "adb sideload". It could help.
Dogue2000 said:
Run "adb usb" before "adb sideload". It could help.
Click to expand...
Click to collapse
Thanks that helped with my nexus 4.
Dogue2000 said:
Run "adb usb" before "adb sideload". It could help.
Click to expand...
Click to collapse
Thanks a lot! It helped me too!
superjose said:
Thanks a lot! It helped me too!
Click to expand...
Click to collapse
or adb devices . it lists your device if its connected and ready. if u r on linux start the adb server using "su" or in ubuntu using "sudo"
Nexus5 here and adb devices shows my device, adb usb didn't help.. :S
I am still getting "error: closed".. any other advice :cyclops:?
ewoks said:
Nexus5 here and adb devices shows my device, adb usb didn't help.. :S
I am still getting "error: closed".. any other advice :cyclops:?
Click to expand...
Click to collapse
not enough info. we dont know your operating system , we dont know what you did , we dont know if you have unlocked bootloader and installed recovery and which recovery. xda forum doesnt have any fortune teller provide more information
kessaras said:
not enough info. we dont know your operating system , we dont know what you did , we dont know if you have unlocked bootloader and installed recovery and which recovery. xda forum doesnt have any fortune teller provide more information
Click to expand...
Click to collapse
Stock KK4.4, not touched (just unpacked) and driver problems are of course Win7
hi
i have same problem with 4.1.2 v20c-ame i can't root when open root.bat its open then close
solved
I search about this problem it was a bluestack if u have it
try to close it from background process
Edit: apparently attempts at help are now considered spam. Comments deleted.
themitch said:
Again, these instructions are specific to my nexus. You might have to play with the specifics to find the update.zip options, but this should get you close enough. Hope this helps!
Click to expand...
Click to collapse
Please don't spam the Nexus stuff here, it's of no use.
Dogue2000 said:
Run "adb usb" before "adb sideload". It could help.
Click to expand...
Click to collapse
it helped me, but now appear device not found
Hello everyone,
i have a big problem... My One don't boot anymore.
Wanted to flash a new rom now i get a bootloop. And my sound volume buttons dont work since 3 months...
so i cant boot via vol- and power button to recovery...
My one gets stuck on HTC Logo...
is there an other way to get in revovery ? e.g. cmd command on PC ?
Many thanks in advance
remix92 said:
Hello everyone,
i have a big problem... My One don't boot anymore.
Wanted to flash a new rom now i get a bootloop. And my sound volume buttons dont work since 3 months...
so i cant boot via vol- and power button to recovery...
My one gets stuck on HTC Logo...
is there an other way to get in revovery ? e.g. cmd command on PC ?
Many thanks in advance
Click to expand...
Click to collapse
I don't know if it will work but if you can get ADB to work, you might try this command:
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
I'm sure of the syntac but you can try the various combinations. I really think you need to get those buttons fixed because you are really limited on what you can do without them.
remix92 said:
Hello everyone,
i have a big problem... My One don't boot anymore.
Wanted to flash a new rom now i get a bootloop. And my sound volume buttons dont work since 3 months...
so i cant boot via vol- and power button to recovery...
My one gets stuck on HTC Logo...
is there an other way to get in revovery ? e.g. cmd command on PC ?
Many thanks in advance
Click to expand...
Click to collapse
You can try powering off the device connect usb then do
Code:
adb wait-for-device reboot recovery
Then power the phone on. With a little luck it will catch at the right place and land you in recovery. I doubt it will work but it's about as good as it gets without working volume keys. Good luck [emoji120]
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Danny201281 said:
You can try powering off the device connect usb then do
Code:
adb wait-for-device reboot recovery
Then power the phone on. With a little luck it will catch at the right place and land you in recovery. I doubt it will work but it's about as good as it gets without working volume keys. Good luck [emoji120]
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Click to expand...
Click to collapse
step by step please
1. power on device.
2. connect usb
3. run adb in cmd with command "adb"
4"adb reboot recovery" in cmd
is this right ?
remix92 said:
step by step please
1. power on device.
2. connect usb
3. run adb in cmd with command "adb"
4"adb reboot recovery" in cmd
is this right ?
Click to expand...
Click to collapse
Power off device
Connect PC to device
Open command window in adb/fastboot folder
Type:
Code:
adb wait-for-device reboot recovery
Power on device
Thank you
you're the best
it worked
remix92 said:
Thank you
you're the best
it worked
Click to expand...
Click to collapse
Your welcome, Glad it worked for you it rarely does. And no need to say thanks, there's a button for that :good:
One last thing could you please edit the threads title beginning [SOLVED]
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Hello everyone,
as title says, im stuck on booting HTC Desire C device. HTC logo on white background with "this build is for development purposes only...", cycling over and over. Mistake i made is when i was using 'All-In-One-Kit-v2.0' i forgot to install CMW, flashed "boot900.img" wich is overclocking kernel, flashed it, powered off the device, turned it back on and got stuck there. Im struggling whole morning to get this done... searched whole google about this, tried to flash "recovery.img", flashing new ROMs, unfortunately, nothing has been done. Hopefully you could help me and i would really appreciate that. Im newbie here, my english is not that good soo..
Turn it off, press volume down key, and hold it with power until you get to fastboot. Then connect it to your PC, and flash a Cwm, and then lower frequency kernel...
calinorg said:
Turn it off, press volume down key, and hold it with power until you get to fastboot. Then connect it to your PC, and flash a Cwm, and then lower frequency kernel...
Click to expand...
Click to collapse
If you could explain to me how to flash cwm while im in fastboot, it would be really awesome... Btw "thanks" button is hit!
There are plenty of similar topics here so read around for details, but the command itself is fastboot flash recovery recovery.img
Recovery.img should be your cwm ...
Sent from my XT1032 using Tapatalk
calinorg said:
There are plenty of similar topics here so read around for details, but the command itself is fastboot flash recovery recovery.img
Recovery.img should be your cwm ...
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Well I think i got everything set up... but i ran into a problem last night. It happens i cant find my device attached under "adb devices". I have installed drives needed, installed adb and fastboot on pc, nothing seems to work with me... Its driving me crazy..
You can't find it because adb works only if it is booted. Try typing fastboot devices
Sent from my XT1032 using Tapatalk
calinorg said:
You can't find it because adb works only if it is booted. Try typing fastboot devices
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
wow i feel dumb now... haha anyways thank you... but now it says "cannot load recovery.img"... Im really noobish around here so any help would be gorgeus
What is the name of your recovery file? Change recovery.img with the name of the file
Sent from my XT1032 using Tapatalk
calinorg said:
What is the name of your recovery file? Change recovery.img with the name of the file
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
it is "recovery.img".... Do i need to put it some specific folder or?
In the same folder as fastboot and adb
Sent from my XT1032 using Tapatalk
calinorg said:
In the same folder as fastboot and adb
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Thats installation folder of adb and fastboot in program files, right?
Yes. Or you could type the whole path to fastboot file... I think that it's easier to put it in program Files...
Sent from my XT1032 using Tapatalk
Well i wrote "fasboot flash recovery c:\users..etc \recovery.img" and it throws me out error.. im not home atm so i cant quote correctly whole error but asap i get home ill copy it whole
Sent from my GT-I9082 using Tapatalk
calinorg said:
In the same folder as fastboot and adb
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yep, it is in the same folder as adb and fastboot and im getting this message after "fastboot flash recovery recovery.img": "Error: cannot load 'recovery.img'"
Well now I really don't know. Try fastboot boot recovery.img as a temporary solution... That should just boot that recovery, without installing it to partition.
Sent from my XT1032 using Tapatalk
Hmmm... it says for recovery.img no such file or directory even tho it is in c:\adb
Sent from my GT-I9082 using Tapatalk
I just tried "fastboot flash recovery C:\adb\recovery.img"
And i got this:
"sending 'recovery' (4888KB)...
FAILED (command write failed (Invaild argument))
Finished. Total time: 0.031s"
Im really trying to solve this out, it is bugging me whole day...
EDIT: I tried different cables, different usb ports, placing recovery.img into different folders and fastbooting from there. Nothing seems to help...
Sent from my GT-I9082 using Tapatalk
Bump... anyone? Please?
Do you have a sync manager program installed? If so, uninstall it (it should leave the drivers installed) and try again, the sync manager identifies your handset and takes control so flashing gets interfered with
What version of Windows? (I've not read whole thread) Win7 upwards has driver install problems so search the forums/threads
Only use on USB 2.0 ....3.0 is a higher speed than our handsets are capable of
Sent from my B1-730HD using XDA Free mobile app