Related
Hi everybody:
Now I have installed hybrid CM10.1 on Nook HD in a 8G TF card. Then I would like to replace it with a new 32G card.
My question is how to transfer all the data, use the extra space and does not broke the system.
Thanks
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thank you! It works.
leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
I had made an empty ".txt" file, then rename it to ".img". It may solve the problem.
badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
attempt number 25
leapinlar said:
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
badger60 said:
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
Click to expand...
Click to collapse
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
badger60 said:
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
Click to expand...
Click to collapse
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I followed your advice exactly. It appeared to work the same way that it did with the working 8GB SDHC card. I still have a nandroid backup of the old card on my PC. It just doesn't work on the two higher capacity SD cards I have. I see that I am going to have to look through the list and find the exact model of a 32 GB card that someone got working. It works fine on the Sandisk 8GB Class 4 card. The two Samsung cards (class 6) of 16 & 32 GB capacity that I own don't work. They are OK for storage use, but trying to install Android on them was a waste of time. I tried so many times. I used your tutorials and others tutorials unsuccessfully. A bum SD card is a bum SD card. I am not exactly a newbie at installing ROMs on devices . I have been doing it on my HTC Desire HD for about a year ever since HTC abandoned us and decided to not give us ICS or Jellybean for our expensive devices. I have Venom DHD on my HTC Desire HD at the moment. I am waiting for my new Samsung Galaxy s4 to arrive this week.
So, a few days ago verygreen uploaded his emmc cyanogenmod install for Nook HD+. I was ecstatic but only got around to installing it today. Install went great up until after flashing the rom.The nook threw an error when trying to unmount the sd card (as per verygreen's instructions) "no problem, I'll just shut down the tablet" I thought. So I do so, remove the SD card, turn the tablet back on, and insert a seperate SD card for storage. The rom loaded up just fine and everything seemed normal. I downloaded and ran a benchmark to see that everything was up to par then went to take a screenshot (to compare to other versions later). A second later I looked at my notifications bar to see a message that the screenshot could not be taken because there is no SD card. After a short investigation I realized that the SD card wasn't showing up in my storage section. It showed up just fine in my computer and I've used the card in this nook before. Just to be sure I plugged the CWM card from earlier, sure enough it didn't show up either. As I'm not a complete novice I figured I should try reflashing before coming here. I did so and the nook seemed to recognize that the card was there! Wait, it now says the card is blank or in an unsupported filesystem. Checking the SD on the computer shows it to be in Fat32, which worked in all previous Roms just fine and clicking the notification to try and format also does nothing. Anyone have any advice?
Additionally I should probably mention that I am using the 05/05 Rom, which I thought was supposed to fix mounting issues
Same issue here :/
tehkingo said:
Same issue here :/
Click to expand...
Click to collapse
Yours was on Hybrid and easily solved. His is on emmc.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 05:42 PM ---------- Previous post was at 05:36 PM ----------
Nookuser19 said:
So, a few days ago verygreen uploaded his emmc cyanogenmod install for Nook HD+. I was ecstatic but only got around to installing it today. Install went great up until after flashing the rom.The nook threw an error when trying to unmount the sd card (as per verygreen's instructions) "no problem, I'll just shut down the tablet" I thought. So I do so, remove the SD card, turn the tablet back on, and insert a seperate SD card for storage. The rom loaded up just fine and everything seemed normal. I downloaded and ran a benchmark to see that everything was up to par then went to take a screenshot (to compare to other versions later). A second later I looked at my notifications bar to see a message that the screenshot could not be taken because there is no SD card. After a short investigation I realized that the SD card wasn't showing up in my storage section. It showed up just fine in my computer and I've used the card in this nook before. Just to be sure I plugged the CWM card from earlier, sure enough it didn't show up either. As I'm not a complete novice I figured I should try reflashing before coming here. I did so and the nook seemed to recognize that the card was there! Wait, it now says the card is blank or in an unsupported filesystem. Checking the SD on the computer shows it to be in Fat32, which worked in all previous Roms just fine and clicking the notification to try and format also does nothing. Anyone have any advice?
Additionally I should probably mention that I am using the 05/05 Rom, which I thought was supposed to fix mounting issues
Click to expand...
Click to collapse
You make it sound like you are trying to insert the SD after you have booted to CM10.1. That won't work. You must boot with the SD already inserted so that it is recognized while CM10.1 starts up.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Yours was on Hybrid and easily solved. His is on emmc.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 05:42 PM ---------- Previous post was at 05:36 PM ----------
You make it sound like you are trying to insert the SD after you have booted to CM10.1. That won't work. You must boot with the SD already inserted so that it is recognized while CM10.1 starts up.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
That didn't work I'm afraid. The message about the blank SD card is gone but it still won't let me save a screenshot. Gives a message about the storage being in use. Also, attempting to move an app to the SD card says there's not enough space... On my freshly formatted 32 gigabyte card that, once again, works and reads just fine on my computer. I will mention there is a header for the SD under my storage tab in settings, and it attempts to calculate the used space of the SD, however it does that whether the card is in or not. For that reason I don't think it means anything. Any other ideas? Because I'm certainly at a loss.
Nookuser19 said:
That didn't work I'm afraid. The message about the blank SD card is gone but it still won't let me save a screenshot. Gives a message about the storage being in use. Also, attempting to move an app to the SD card says there's not enough space... On my freshly formatted 32 gigabyte card that, once again, works and reads just fine on my computer. I will mention there is a header for the SD under my storage tab in settings, and it attempts to calculate the used space of the SD, however it does that whether the card is in or not. For that reason I don't think it means anything. Any other ideas? Because I'm certainly at a loss.
Click to expand...
Click to collapse
How did you freshly format the card? With Windows? You need to use a program named SDFormatter free on the web.
If you boot with no card in you will see that it does not show a card under storage, does not attempt to calculate, etc. There is something about your card it does not like. The hardware on the HD+ is notoriously faulty when it comes to SDs. Format it with SDFormatter, clean the contacts, make sure it is seated well in the slot and anything else you can do to improve things.
Sent from my Nook HD+ running CM10.1 on emmc.
Update
I'm a moron. I failed to notice that the rom that the I downloaded actually was the 05/04 rom, the one with no bluetooth or SD mounting... In my defense verygreen hadn't updated his post (I downloaded from the one he linked in the body of his text, not at the bottom). *Sigh* Still though, I should have been paying more attention and if I had been less lucky I could have bricked my device. Anyways, after flashing the PROPER rom SD mounting works fine (though it was a bit finicky, requiring a reboot before finally working). Anyways thanks for your time, and sorry for giving inaccurate information.
what is the sd format allowed by hd+ in emmc?
I wanted to follow up on this thread by asking a general concluding question-
In order to use the sd cards directly in emmc, will the SD cards have to be in fat32 format only? Or can it be in exfat (or even ntfs)? According to a thread, somebody put a quote from the nook website that it can handle exfat.
The reason is that I wanted my nook to be able to read mkvs. I went through the sdformatter software, and it seems that it only formats in fat32.
TIA.
leapinlar said:
How did you freshly format the card? With Windows? You need to use a program named SDFormatter free on the web.
If you boot with no card in you will see that it does not show a card under storage, does not attempt to calculate, etc. There is something about your card it does not like. The hardware on the HD+ is notoriously faulty when it comes to SDs. Format it with SDFormatter, clean the contacts, make sure it is seated well in the slot and anything else you can do to improve things.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I am having same problems.Inastalled Verygreen's CM10.1 on internal storage this morning.SD card is not being recognized by nook.I go to settings and tap "storage" and settings force closes,Tried to mount sd card thru recoveryand error message comes up.I formatted sd card in windows and then SD Formatter in fat32 format,C
leaned sd slot with compressd air,No go.Tried 3 different cards Samsung.sandisk class 10 32 gb,sandisk class 4 16gb ,Samsung class10 8gb same result.E
nen reinstalled CM 10.1 emc 6/8/13.did not help.
akramarshad said:
I am having same problems.Inastalled Verygreen's CM10.1 on internal storage this morning.SD card is not being recognized by nook.I go to settings and tap "storage" and settings force closes,Tried to mount sd card thru recoveryand error message comes up.I formatted sd card in windows and then SD Formatter in fat32 format,C
leaned sd slot with compressd air,No go.Tried 3 different cards Samsung.sandisk class 10 32 gb,sandisk class 4 16gb ,Samsung class10 8gb same result.E
nen reinstalled CM 10.1 emc 6/8/13.did not help.
Click to expand...
Click to collapse
I temporarily had the same issue, but mine was caused by me tampering with /system/etc/vold.fstab to test a new swap I was trying to make. I changed a setting there and it would not recognize the SD and settings/storage crashed. So that tells me that your system is definitely not mounting the SD. It could be a faulty SD slot. Are you sure you are completely clicking the SD into the slot? Did the slot work well when running stock?
Edit: How does it act when you boot with no SD inserted? Does settings crash? And what happens if you insert the SD after it is booted to CM10.1? Does settings crash then?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I temporarily had the same issue, but mine was caused by me tampering with /system/etc/vold.fstab to test a new swap I was trying to make. I changed a setting there and it would not recognize the SD and settings/storage crashed. So that tells me that your system is definitely not mounting the SD. It could be a faulty SD slot. Are you sure you are completely clicking the SD into the slot? Did the slot work well when running stock?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
It was working fine with stock as well as hybrids from Verygreen as well as Bokbokan.I will try doing a complete wipe including system.Previusly I wiped data and catch partitions.
akramarshad said:
It was working fine with stock as well as hybrids from Verygreen as well as Bokbokan.I will try doing a complete wipe including system.Previusly I wiped data and catch partitions.
Click to expand...
Click to collapse
See the edit above.
Sent from my Nook HD+ running CM10.1 on emmc.
SD card not reading Nook HD+
Reinstlled after wipingdata,catch and system and now it is working fine.I guess something in system was causing it,Thanks Leapinlar I appreciate you prompt help.
same here with samsung galaxy exhibit 4g
akramarshad said:
It was working fine with stock as well as hybrids from Verygreen as well as Bokbokan.I will try doing a complete wipe including system.Previusly I wiped data and catch partitions.
Click to expand...
Click to collapse
I have tried all of the things listed on here. My sd card is formatted fat32. it reads just fine on my computer but when inserted into my phone I can't move apps to it, I can't open it to look at my files. I even tried removing everything from the sd and starting over. This has only been since I upgraded to cyanogenmod 10.1. any suggestions? I really want to move some stuff and am in need of my music files at the gym
jmcpheeters said:
I have tried all of the things listed on here. My sd card is formatted fat32. it reads just fine on my computer but when inserted into my phone I can't move apps to it, I can't open it to look at my files. I even tried removing everything from the sd and starting over. This has only been since I upgraded to cyanogenmod 10.1. any suggestions? I really want to move some stuff and am in need of my music files at the gym
Click to expand...
Click to collapse
You cannot move apps to SD with CM10.1. Apps2SD is not implemented.
And to access your external SD, you need to look in ext_sdcard. But CM10.1 on emmc uses the internal SD by default for everything. You can change that by flashing my swap SD zip from my HD/HD+ CWM thread linked in my signature. See item 4.
Sent from my Nook HD+ running CM10.1 on emmc.
to clarify
ok thanks. so just to clarify, does the nook hd/hd+ work for my Samsung exhibit 4g?
leapinlar said:
You cannot move apps to SD with CM10.1. Apps2SD is not implemented.
And to access your external SD, you need to look in ext_sdcard. But CM10.1 on emmc uses the internal SD by default for everything. You can change that by flashing my swap SD zip from my HD/HD+ CWM thread linked in my signature. See item 4.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
nook HD/HD+
it isn't showing up when I go to unzip on my phone.
This has proven to mean this isn't compatible with my phone. is there another version you can suggest for me to try?
jmcpheeters said:
ok thanks. so just to clarify, does the nook hd/hd+ work for my Samsung exhibit 4g?
Click to expand...
Click to collapse
jmcpheeters said:
it isn't showing up when I go to unzip on my phone.
This has proven to mean this isn't compatible with my phone. is there another version you can suggest for me to try?
Click to expand...
Click to collapse
It is a Nook HD+ rom, and will not work on a non-Nook HD+ device. Try the roms in the Galaxy Exhibit development forum.
If This Helps Anyone...
I spent roughly 4 to 5 days' worth of working hours sitting here at my laptop, trying more and more frustratingly, to get my Nook HD+ to take the new CM Rom, and then dealt with about a dozen full 1080p HD movies I had already spent about 3 hours each to convert to .mp4 and the right size for my Nook, which now was not showing ANY of the content on my 32g SD card. Well, I tried all the formatting (using the SDformatter program), all the re-booting and putting the content directly on it through the Nook, and putting the files on it through my laptop, and I got nothing.
Finally, after noticing a theme among most of the users who were having problems specifically with SanDisk and/or 32gb sized cards, I took the awesome (and expensive) 64gb class 10 SDXC Samsung card out of my Note 2 phone, and formatted that one using the SDF program, and put it on 'exFAT', and after putting the blank card back in my Nook (powering it off fully first), I had to COPY THE FOLDER FROM THE NOOK'S MAIN STORAGE CALLED "MY FILES" AND PASTE IT INTO THE SD CARD STORAGE. Then, I opened it and made folders inside that one for Movies, Music, eBooks, etc... I then loaded the movies onto it via the Nook itself, making sure to paste the files into the SD folder. I also noticed that I needed to keep the Nook from falling asleep, and set it to the highest setting of time before it would go into sleep mode (30 min) and had to keep swiping the screen to reset that time. I also just loaded one large movie file or a few smaller video files at a time, because if the screen went off, or if I had videos loading onto the Nook for more than a couple minutes, then I would get the frequently reported error saying that it 'could not copy'.
After doing all of this, I was finally able to start a couple of my movies with minor problems. I hate how it says in the video player I was using, that you have to use the right side touchscreen to swipe on an invisible volume control up or down, and it was extremely sensitive but also not easy to control.
So, to review:
-Try using a different card other than SanDisk and 32gb
-DL the free SDformatter program and use that to format ANY card you put in your CM rooted Nook! Try to set it at 'exFAT' also.
-Power OFF the Nook before installing the new SD card.
-Then plug the Nook into your computer, and COPY-PASTE the file folder "My Files" in the Nook's MAIN STORAGE and put it into the SD card. Make folders inside this one to sort your movies, music, books, etc.
-Copy-Paste your files that are NOT eBooks from your computer into the new 'My Files' on the SD card. (I suggest using Calibre or another program to load eBooks into your Nook after you have gotten all the metadata correct for each book.) Keep the Nook 'awake' and do not allow the screen to enter sleep mode during loading of files. Make sure to load only about 3 minutes' worth, or no more than one LARGE movie file at a time onto the Nook, to prevent it from disconnecting and giving you an error pop-up.
That should do it, and if you have problems after this, then maybe ask around more. I only know how this works by my own extensive (and exhausting) trial and error...
since i did this on my nook putting files over the sd card is messed up, only lets me use the other 29gb is if its in nook and nook plugged in, i want to not use the cm 10 and use my sd normally but it says 199mb when format, please help!
Whelan189 said:
since i did this on my nook putting files over the sd card is messed up, only lets me use the other 29gb is if its in nook and nook plugged in, i want to not use the cm 10 and use my sd normally but it says 199mb when format, please help!
Click to expand...
Click to collapse
Get the free program SDFormatter on the web. Then set the option for size adjustment and format it. Should take it back to full size.
Sent from my Nook HD+ running CM10 on Hybrid SD
simply Put it on the camera and use the format ability of camera to format it. It should be back to normal.
leapinlar said:
Get the free program SDFormatter on the web. Then set the option for size adjustment and format it. Should take it back to full size.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
hi, worked perfectly thanks very much, people like you make this site so awesome
Once you burn ClockWorkMod (or any other recovery), your SD card becomes partitioned. The other partition can only be accessible by the Nook.
If you no longer want to use this SD card in your Nook, or would prefer just to use this card as a media card; you can use the software SDFormatter. Use this software to format, and your card will be restored back to it's factory settings (unless you decide to change the file system).
You can find this software for Windows here: https://www.sdcard.org/downloads/formatter_3/eula_windows or for Mac: https://www.sdcard.org/downloads/formatter_3/eula_mac/
All the best.
Whelan189 said:
since i did this on my nook putting files over the sd card is messed up, only lets me use the other 29gb is if its in nook and nook plugged in, i want to not use the cm 10 and use my sd normally but it says 199mb when format, please help!
Click to expand...
Click to collapse
gpart on ubuntu
I have Leapinlar's SD card image installed on a SD card that I used to then install the EMMC version onto my HD+ which is working great, thanks to Leapinlar and Verygreen for that. Since I don't want to misplace the SD card I've left it in my Nook, but then whenever I reboot it, it boots off of the SD card and goes into the CWM on the card. I was wondering if anyone knew of a way to activate the Cyanoboot menu on the card so that I could choose to boot from the card, or the EMMC, and possibly change the default so that it boots to the EMMC instead. I realize that this might not be the right forum as it isn't necessarily a Nook question, so thanks for any help.
Edit: I should specify that I used the 4GB CWM SD card image in Leapinlar's thread, and is the one I'd like to modify. Thanks.
Ask and Ye shall receive.
Attached below is a .rar file that has four files in it. Extract those files to the boot partition of your CWM SD, replacing any duplicates. It will add the cyanoboot menu to it. It will by default boot to CWM, but if you want to boot to emmc (stock or CM10.1 on emmc), hold the n key and the cyanoboot menu will come up and you can choose stock. If you want it to boot to emmc by default, just change the Default Boot Device from "CM10/10.1" to "Stock". Then it will boot to emmc if you do nothing. Then you can boot to CWM by using the cyanoboot menu.
You rock, thanks!
leapinlar said:
Ask and Ye shall receive.
Attached below is a .rar file that has four files in it. Extract those files to the boot partition of your CWM SD, replacing any duplicates. It will add the cyanoboot menu to it. It will by default boot to CWM, but if you want to boot to emmc (stock or CM10.1 on emmc), hold the n key and the cyanoboot menu will come up and you can choose stock. If you want it to boot to emmc by default, just change the Default Boot Device from "CM10/10.1" to "Stock". Then it will boot to emmc if you do nothing. Then you can boot to CWM by using the cyanoboot menu.
Click to expand...
Click to collapse
I know this thread is a bit old, but thanks! Didn't know if it would work,, but added it to my CM 10.2 SD so I could dual boot that and CarbonRom. Other than the menu having the wrong text, it works quite well.
Sent from my BN NookHD+ using Tapatalk 4
I have the Stock BN rom on DS card and have 10.2 on native install.. but an i think as far as installing the dual boot menu i got that right..
but when i try to switch to the Stock BN rom living on the SD card it just says loading SD... but never continues to the BN boot animation.. or loads continues to login... it feels like a boot loop... do i have to have root access to get this to operate... i have 10.2 root but BN SD is not rooted... confused...
i would just like a boot menu to allow the option to boot to the BN SD card or default to native 10.2..
help?
scuzzo said:
Im trying to put the Stock BN rom on DS card and have 10.2 on native install.. but an i think as far as installing the dual boot menu i got that right..
but when i try to switch to the Stock BN rom living on the SD card it just says loading SD... but never continues to the BN boot animation.. or loads continues to login... it feels like a boot loop... do i have to have root access to get this to operate... i have 10.2 root but BN SD is not rooted... confused...
help?
Click to expand...
Click to collapse
My files do not work with the systems reversed. Stock must be emmc and CM on SD. Sorry.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
My files do not work with the systems reversed. Stock must be emmc and CM on SD. Sorry.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Right thread this time! So this is dual boot thread (sorry about earlier Leapin!).
Took me about five minutes to get where I'd made my mistakes though even after finding this and trying again. Now that I understand how this installs, and that stock must be in emmc, I just have one question....do I place CM 10.1 on the root of my SD card as a zipped, or unzipped, file for it to load from the menu? Or is there still more to do other than just "sticking the file on there?"
I know this much...every day I have greater & greater respect for xda developers. To be willing to explain things so even myself can understand it a little - and put up w questions - has to be a chore in and of itself. Thank you!
Prof24 said:
Right thread this time! So this is dual boot thread (sorry about earlier Leapin!).
Took me about five minutes to get where I'd made my mistakes though even after finding this and trying again. Now that I understand how this installs, and that stock must be in emmc, I just have one question....do I place CM 10.1 on the root of my SD card as a zipped, or unzipped, file for it to load from the menu? Or is there still more to do other than just "sticking the file on there?"
I know this much...every day I have greater & greater respect for xda developers. To be willing to explain things so even myself can understand it a little - and put up w questions - has to be a chore in and of itself. Thank you!
Click to expand...
Click to collapse
First you need to go to verygreen's SD thread and make the early 7.1 CWM card. The put the CM10.1 zip on internal memory using stock. Then boot with the CWM SD you just made and after it finishes preparing the SD, install the zip from internal memory. Then you can use the files in this thread to put the cyanoboot menu on that SD.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
First you need to go to verygreen's SD thread and make the early 7.1 CWM card. The put the CM10.1 zip on internal memory using stock. Then boot with the CWM SD you just made and after it finishes preparing the SD, install the zip from internal memory. Then you can use the files in this thread to put the cyanoboot menu on that SD.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Ok, I seem to be / was good until I got to installing zip from internal memory. This is what has happened so far.
1. Created 7.1 CWM SD with win32 disc imager ...No probs
2. Not enough room on external card to place CM 10.1 zip file even though I started with 16 Gb....so I assumed you meant load CM 10.1 to Nook HD+ internal memory from my PC...no problem there.
3. This is where I got stuck: 7.1 card booted up just fine, but then I wasn't quite sure what next step was...found "install zip from internal SD" and tried that, but of course it sent the update - apparently - to emmc, as Cyanogenmod spinner logo now comes up after reboot.
So my question is how do I need to go about installing from internal memory once CWM 7.10 is running. Is there an adb command I'l need, or did I just choose wrong option?
Prof24 said:
3. This is where I got stuck: 7.1 card booted up just fine, but then I wasn't quite sure what next step was...found "install zip from internal SD" and tried that, but of course it sent the update - apparently - to emmc, as Cyanogenmod spinner logo now comes up after reboot.
So my question is how do I need to go about installing from internal memory once CWM 7.10 is running. Is there an adb command I'l need, or did I just choose wrong option?
Click to expand...
Click to collapse
You used the correct menu item.
If you used an sdcard version of the CM zip, it should have put it on the SD. You can tell by popping the SD out of the slot and booting. It should still boot to stock if you used the correct version. Then when you put the SD back in the slot it should boot to CM.
If you have it correct, then use the files in this thread to add the cyanoboot menu so you can boot back and forth without taking the card out.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You used the correct menu item.
If you used an sdcard version of the CM zip, it should have put it on the SD. You can tell by popping the SD out of the slot and booting. It should still boot to stock if you used the correct version. Then when you put the SD back in the slot it should boot to CM.
If you have it correct, then use the files in this thread to add the cyanoboot menu so you can boot back and forth without taking the card out.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Didn't use correct version...I'll have to find SD card version of CM 10, reload stock and try again.
Prof24 said:
Didn't use correct version...I'll have to find SD card version of CM 10, reload stock and try again.
Click to expand...
Click to collapse
You get the SD version the same place you got 7.1, verygreen's thread.
Sent from my Nook HD+ running CM10.1 on emmc.
Missing memory on SD CM10 boot
First post so I hope I'm putting this in the right place.
I have a Nook HD+ 32GB
I' ve started with Leapinlar's
[CWM/ROOT/EXTRAS] HD/HDplus Stock Root and other Mods
I've then used verygreen's
[Nook HD+] CM10.1 development for sdcard last update 09/04
All that seems to be fine but in CM10.1
Settings - storage reports internal memory 1GB and no SD memory or available mounts
x-plore reports /storage/emulated/0 and /Root as 850MB free of 1GB
Without the SD card - reverting to stock - I have 2.44GB used and 26.56GB available.
Is the 1GB apparently available on a partion on the SD card? I only had a 2GB SD going spare - this now has three partitions, the boot files and two others, one of 1GB. If I'd used a 32GB card would I have 31GB free?
But, more importantly, can anyone tell me how I get CM to give me my 32GB of internal storage back?
Please?
FWIW I expect to run CM10 from internal memory in the long run, but want to be sure that a couple of critical apps run OK before replacing the B&N stock.
Dave
davedamsons said:
First post so I hope I'm putting this in the right place.
I have a Nook HD+ 32GB
I' ve started with Leapinlar's
[CWM/ROOT/EXTRAS] HD/HDplus Stock Root and other Mods
I've then used verygreen's
[Nook HD+] CM10.1 development for sdcard last update 09/04
All that seems to be fine but in CM10.1
Settings - storage reports internal memory 1GB and no SD memory or available mounts
x-plore reports /storage/emulated/0 and /Root as 850MB free of 1GB
Without the SD card - reverting to stock - I have 2.44GB used and 26.56GB available.
Is the 1GB apparently available on a partion on the SD card? I only had a 2GB SD going spare - this now has three partitions, the boot files and two others, one of 1GB. If I'd used a 32GB card would I have 31GB free?
But, more importantly, can anyone tell me how I get CM to give me my 32GB of internal storage back?
Please?
FWIW I expect to run CM10 from internal memory in the long run, but want to be sure that a couple of critical apps run OK before replacing the B&N stock.
Dave
Click to expand...
Click to collapse
Everything is as it should be. You only have 1GB for 'sdcard' since you only used a 2GB SD. If you had used a 32GB, you would have close to 31GB for 'sdcard'.
And on an SD install, the internal memory is still there but not as 'sdcard'. It shows as a folder named 'emmc'.
Since you are planning on installing CM to internal memory, it will be even different yet. 'Sdcard' will be your internal memory and your external SD will be shown as ext_sdcard.
And do not pay too much attention to the settings/storage. People get very confused when reading that since it mixes apples and oranges. (Media storage and app storage).
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
Everything is as it should be. You only have 1GB for 'sdcard' since you only used a 2GB SD. If you had used a 32GB, you would have close to 31GB for 'sdcard'.
And on an SD install, the internal memory is still there but not as 'sdcard'. It shows as a folder named 'emmc'.
Since you are planning on installing CM to internal memory, it will be even different yet. 'Sdcard' will be your internal memory and your external SD will be shown as ext_sdcard.
And do not pay too much attention to the settings/storage. People get very confused when reading that since it mixes apples and oranges. (Media storage and app storage).
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Finally...it worked! Thanks leapinlar, for all your help!
I encountered the situation above and am wondering if, say, instead of the 2GB card I use a 16 GB...that gives me 16 GB of storage for the CM 1.0 tablet, and my regular flash storage also stays 16 GB? Or all the apps are by default stored on the emmc?
Prof24 said:
Finally...it worked! Thanks leapinlar, for all your help!
I encountered the situation above and am wondering if, say, instead of the 2GB card I use a 16 GB...that gives me 16 GB of storage for the CM 1.0 tablet, and my regular flash storage also stays 16 GB? Or all the apps are by default stored on the emmc?
Click to expand...
Click to collapse
On the SD install, both media and apps get stored on the SD. If you use a 16GB SD to install CM to, it will have about 15GB available for media and app storage instead of 1GB on the 2GB card. But 2GB is really too small to be running CM. You will be running out of app and media storage very quickly.
Since you will be dual booting, when booted to stock the media and apps will be stored on internal memory. You will either have 13GB or 28GB available on stock on emmc depending on the size of the device (16 or 32GB model).
Sent from my Nook HD+ running CM10.1 on emmc.
Updating SD version of CM 10.1
I know I've seen this elsewhere, but can't find it...if I go to update the rom on the SD card, it makes sense to me that I would need to load the latest SD version from verygreen's page...or can I just update from settings and not lose dual boot? Also, will a dirty install work so that the data is not lost? (backups are always good )
Man we're enjoying dual boot. My Acer a500 is unreliable so I backed the "build a city town park" up with Helium app. Long story short, with dual boot my kid and I get to continue building and enjoying our monsters in "Monsterama Park" by booting to CM 10.1and restoring data, yet I don't have to give up some of the reader features that I really like with the original Nook OS. Marvelous find....again, thanks y'all for the hard work!
Prof24 said:
I know I've seen this elsewhere, but can't find it...if I go to update the rom on the SD card, it makes sense to me that I would need to load the latest SD version from verygreen's page...or can I just update from settings and not lose dual boot? Also, will a dirty install work so that the data is not lost? (backups are always good )
Man we're enjoying dual boot. My Acer a500 is unreliable so I backed the "build a city town park" up with Helium app. Long story short, with dual boot my kid and I get to continue building and enjoying our monsters in "Monsterama Park" by booting to CM 10.1and restoring data, yet I don't have to give up some of the reader features that I really like with the original Nook OS. Marvelous find....again, thanks y'all for the hard work!
Click to expand...
Click to collapse
Do not use settings to update an SD install. It will try to put the new ROM on internal replacing stock. Go get the latest SD ROM from the verygreen thread. You can dirty install it with the SD install's CWM.
Sent from my Nook HD+ running CM10.1 on emmc.
So there is no way to switch the menu for stock on sdcard?
leapinlar said:
Do not use settings to update an SD install. It will try to put the new ROM on internal replacing stock. Go get the latest SD ROM from the verygreen thread. You can dirty install it with the SD install's CWM.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I'm a little confused. I've put verygreens stock on sdcard and have cm 10.2 on emmc. If the images are renamed can you boot with the menu into stock on sd or cm 10.2 from emmc? If not is there a second solution?
krash1256 said:
I'm a little confused. I've put verygreens stock on sdcard and have cm 10.2 on emmc. If the images are renamed can you boot with the menu into stock on sd or cm 10.2 from emmc? If not is there a second solution?
Click to expand...
Click to collapse
It does not work on that configuration and there is no solution.
Sent from my BN NookHD+ using XDA Premium HD app
I need some help with creating an SD card to boot android from on a Nook HD.
I tried this guide:
http://forum.xda-developers.com/showthread.php?t=1000957
I used an old 8gb sandisk micro SD i got from a cell phone
Used win32 disk imager and flashed generic-sd card image onto the root of sd card
Then I took out the card and re-inserted it to get it recognize the new image as F:boot which has 4 files on it MLO U-boot, U ram disk, and u image
Then I went to install CM 7.2 files onto the SD - that's where i ran into trouble. It gave "Error No Room on Disk". I looked at the space on the Sd card and it said it was only 113Mb. _Please help. What did i do wrong when flashing the image file onto SD card to make the sd card smaller?
Thanks in advance for your help.
You have really got things mixed up. This is a Nook HD/HD+ thread and you linked to a Nook Color thread (they are different devices). CM7 does not run on the Nook HD. No wonder things are not working for you.
If you truly have a Nook HD, find a Nook HD thread for installing CM to SD (has to be CM10/CM10.1/CM10.2 though).
Sent from my Galaxy Tab 2 using XDA Premium
trouble installing CM on Nook HD 8GB
leapinlar said:
You have really got things mixed up. This is a Nook HD/HD+ thread and you linked to a Nook Color thread (they are different devices). CM7 does not run on the Nook HD. No wonder things are not working for you.
If you truly have a Nook HD, find a Nook HD thread for installing CM to SD (has to be CM10/CM10.1/CM10.2 though).
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Thank you for the reply. I checked and yes I do have a Nook HD 8GB. I got it from walmart for $129.
So just to confirm - No CM7 will run on Nook HD?
Can you install CM 10 without rooting the device? And if so, is a non-rooted install that runs directly off the SD Card significantly slower than it was flashed to internal memory?
If CM 10 has to be installed to the internal memory, are there dual boot options that would keep what i have on the nook saved?
Also, I noticed when i tried to put CM7 on the SD card, it created a 113 image file, and left the remainder of the disk as "unallocated" - so during the install process how does that unallocated space get turned into usable space?
Any link for the build I need would be very appreciated. Not trying to get anyone to do the work for me, with all the different builds and install files, its complicated for a first timer.
Thanks for help
rnewton8 said:
Thank you for the reply. I checked and yes I do have a Nook HD 8GB. I got it from walmart for $129.
So just to confirm - No CM7 will run on Nook HD?
Can you install CM 10 without rooting the device? And if so, is a non-rooted install that runs directly off the SD Card significantly slower than it was flashed to internal memory?
If CM 10 has to be installed to the internal memory, are there dual boot options that would keep what i have on the nook saved?
Also, I noticed when i tried to put CM7 on the SD card, it created a 113 image file, and left the remainder of the disk as "unallocated" - so during the install process how does that unallocated space get turned into usable space?
Any link for the build I need would be very appreciated. Not trying to get anyone to do the work for me, with all the different builds and install files, its complicated for a first timer.
Thanks for help
Click to expand...
Click to collapse
No, CM7 will run on the Nook HD.
You do not have to root stock to run CM from SD. You can run CM10.1 from the SD and leave stock intact. So you can boot back and forth. If you do, I recommend the hybrid install here:
http://forum.xda-developers.com/showthread.php?p=36668001
It runs more quickly and has more stability. But be warned the instructions can be confusing.
There are no dual boot options that allow you to fully install two systems to internal memory.
And that old Nook Color SD that you used is different than how the Nook HD SD is installed. But you do have to follow directions to get everything to work and fit.
Sent from my Galaxy Tab 2 using XDA Premium