Database Develop

Partitioning new SD Card

New G1 owner. Purchased this:
hxxp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rt=nc&nma=true&item=150522897074&si=ja459pNCCg3NN1jod0njqPzl3JI%253D&viewitem=&sspagename=ADME:X:RTQ:US:1123#ht_500wt_1156
No clue what it's running for Recovery though but I'm assuming the CM6 rom comes with one? I'm waiting for a response from the seller.
Now I want to buy a new 32GB Class 6 SDHC card for use with this particular phone. But I've noticed that partitioning the card is an important step during the installation of said ROM? How would I go about partitioning this new card without bricking my phone? I don't need any of the files off the new card since the seller mentioned that he had cleared it. What should I partition the card too? I've heard anywhere from 512MB to 1.5GB?
What are some applications that I should be aware of for this particular ROM? I'm very new to all of this and want to keep the phone running decently well. I've heard something about an application with the ability to run apps off the SD card to preserve memory? Would installing such a program be simple for someone as noobish as me? Or should I keep it simple and just install everything onto the phone?

Ok. Well first off you have a lot of reading to do. Hope you like to read. I can tell you that partitioning your sdcard is done through recovery mode. You need to get in there first. Also cm6 is a rom. It does not come with a recovery. That is totally different. It would be good to know what version you have. I assume amon ra 1.7.0 but it will tell you on the recovery screen. What values you set it to are up to you but you can just leave the values alone when your doing it and it will give you a starting point. The rom will tell you how to save your apps 2 sd. You have to read the first post to find that info out. Good luck and welcome to xda

[Q] Setting Up New SD Card Wildpuzzle Rom 2.2

Hey guys =)
would firstly like to say that this forum ROCKS!!
incredible knowledge database that has been invaluable to my pursuits so far
I have recently purchased a 16GB Micro SD card to replace the 2GB which originally came with the phone.
I tried inserting the card fresh but the device seems to bootloop and I found that I had to partition the SD card first then transfer all the data from the old card across.
Transferring the data is not a problem (mount the new card via USB in recovery mode and transfer) however I can't for the life of me figure out how to actually partition the card in the first place, as I used ROM Manager to partition it originally.
All the threads I have found are to do with Cyanogens ROM's etc and I am just dead stuck on getting any further with this!!
Could someone possibly link me to a guide or post a guide which I can follow, with all areas covered in a simple manner - THAT WOULD BE SWEEEET!!!
Here is the main guide I am using at the moment however I cannot obviously get past 4 or 5 as this is to with the partition which I cannot do using this method...
theunlockr.com/2009/10/15/how-to-switch-to-a-different-microsd-card-on-android-when-using-swap-hero-and-or-apps2sd
Any help is welcome and once again you guys are awesome, thankyou for the vast amount of knowledge in this forum!!

download a program called partition magic, i think it should do all that you are after.

[Q] Two Simple questions!

Hey Everyone, first off. I love you all. You've made me LOVE my Vibrant and NookColor more than ever!
I have two questions.. (sry my search on the site wasn't working )
1. I had a 4gb microsd card that I used to put the Autonooter for NC on it. Now I'm seeing alot of updates with froyo and overclocking kernels and I want to try them out. But my 4gb card is frozen solid at 32mb, I tried formating a through windows, I read on another post that I cant find at all that theres a better program out there for fully formatting microsd cards back to the original state.. Does anyone know the program?
2. I've been reading daily on the updates for Froyo, Which one is the current most stable version?
----
Thanks!!!
<3

1. Put the uSD card back into your NC. Under the original (BN) Settings ---> Device Info ---> SD card : first unmount the uSD card, then format it. Then remove from NC.
2. Not my thing, no help, sorry.

Thanks for the help on the SD Card! First step done, alot more to go!

Okay, So I installed Clockwork Recovery and made a backup of my system. After I installed clockwork, My nook froze at boot, I figured out how to get into clockwork recovery and I am currently restoring my eclair.
I see alot of people using froyo, which build and what post did everyone do it from? I see alot of eMMC but I see a Development build.. I'm confused as to which one I should get.
Thanks!

ok new to the nook

as the title says im new to the nook..
first off id like to say hello to all and thank everyone in advance for the all the hardwork helping new guys like me get use to a new device.
i have a little knowledge on flashing roms and such on the droid x
i wish to root and install app market..
i know in droid its bootstrap recovery im guessing clockwork is the same ..where do i get the files for this
also im running 1.1.0 is that the latest version ?? and if not how do i update that software??
seems like most of the rooting is done off a sd card i have a 2 gig and 4 gig class 4 card to use .. what other stuff am i going to need like files and such
i know about the windiskimg32 one i have already downloaded it (unless there is a different version for 64 bit windows vista) but im unsure if sd is the best way or can i swap roms like on my X
*****also if i root and get the market will falsh work on this device or are we all waiting for a push to be able to run flash sites , or are the other roms capable of running flash ..??*****
any way i thank you all in advance

Welcome -- this is a great place to learn a lot. If you just want to root and get google apps (including the market) search this forum for "autonooter", a wonderful package that will make is easy and has everything you need. Make sure that your Nooks current software matches the version of autonooter you use. Once you've done that, take some time and read through some of the threads both here and on the sister forum "nook color android development".
You may opt to use one of the alternate (and higher level) versions of Android available and run that off of one of your SD cards. That way you don't even have to root the Nook. Nook's boot first from the SD card, so you can do all sort of fun things.
The other advantage to not rooting just now is that B&N is reportedly pushing an update soon.
Have fun!

great999 said:
as the title says im new to the nook..
first off id like to say hello to all and thank everyone in advance for the all the hardwork helping new guys like me get use to a new device.
i have a little knowledge on flashing roms and such on the droid x
i wish to root and install app market..
i know in droid its bootstrap recovery im guessing clockwork is the same ..where do i get the files for this
also im running 1.1.0 is that the latest version ?? and if not how do i update that software??
seems like most of the rooting is done off a sd card i have a 2 gig and 4 gig class 4 card to use .. what other stuff am i going to need like files and such
i know about the windiskimg32 one i have already downloaded it (unless there is a different version for 64 bit windows vista) but im unsure if sd is the best way or can i swap roms like on my X
*****also if i root and get the market will falsh work on this device or are we all waiting for a push to be able to run flash sites , or are the other roms capable of running flash ..??*****
any way i thank you all in advance
Click to expand...
Click to collapse
Welcome! I'll tell you, I've been an android user/rooter for almost two years and only found this site aabout a month ago and have been obsessed since!
To me, since you've rooted before, the best way to go is straight to CM7. It converts it to a full tablet and is the best of the roms now (full video support, bluetooth, flash, etc.) The wiki on the cyanogenmod website is a great way to go from stock to fully rooted with CM7 installed and is the way I'd recommend for anyone who can understand it.
As for what you'll need...nothing else really, except the root and/or rom files, which can be found usually in whatever tutorial you're using.
Autonooter is good if you're going to stay stock rooted, but that's it's only advantage.

1.10 is the latest.
I've been running using the sdcard rather than flashing the internal memory, and found it to work well. One advantage is that you don't lose the built in reader app (which is more capable than the one available in the market). Personally I've had the best luck with Customized Nookie Froyo- tried CM7 but it was flaky. Choice of sdcard does seem to affect things too- some folks have reported problems with class 10 cards and some with cards > 8g. Class 6th 8gb cards seem to be the least troublesome.
One tool you may find useful is gparted. You can create a bootable usb key with that that will allow you to resize the last partition on the sdcard (the data partition, shows up as /sdcard). Many of the images are posted for 2gb cards, so if you install on a larger card you need a tool like that to resize the partition and make full use of your card.
Hope that helps you get started...

Galaxy S3 Mini GT-18190N 4.1.2 Create Second Partition with SDcard?

so lost!! please help!
hello there
i have the galaxy s3mini GT- 18190N
uk resident
carrier T-Mobile
android version 4.1.2
kernel version 3.0.31-1436784
ive had the phone for some time now and obviously internal space has became a problem so i looked around the net and it seemed that the first thing i must do was to root the phone....
i rooted with the main intention of being able to put my apps into my 32gb extsd card
secondly to perhaps upgrade the OS to say lollipop
thirdly to maybe try out some of these custom roms ive read so much about.
so i did root the phone using kingroot app, this seemed to help with the speed of the phone/reduced lagging and such but not with internal memory.
i then looked around for a solution and the general answer was to install link2sd and app2sd.
i installed both but had no joy due to no 2nd partition on sd card.
this led me to downloading rommanager (which apparently can create a 2nd partition on the etxSD) well this is when i realised my noobness knew no bounds, because for the life of me i cant seem to be able to do it lol
i looked around again and read as much as i could in regards to creating a 2nd partition on the extSD but again have not found a clear (complete and utter noob proof) guide to do this so am now stuck in limbo
ive read so much this last few days about flash/roms/internal sd/internal phone memory/external sd/nands/backups/backdowns/backflips ect. that i feel completely lost.
i understand this is probably a very tedious request to you more educated folk but what i would like to know is:
1 - can i return my phone to stock settings? (what it was like before i rooted) will this delete all the changes ive made and apps ive downloaded? and is this the best idea? to start all over again from scratch? if so how?
or can i download a custom rom that already has these settings? by settings i mean the ability to move my apps to the external SD? if so, how?
im really sorry for being a pain but my brains gonna explode.
please help
thank you

anyone that can help me please

I had your same problem twice. I just forgot to set the new partition "active".. Did you already check if the partition is primary and active?

Stefano Cappelletti said:
I had your same problem twice. I just forgot to set the new partition "active".. Did you already check if the partition is primary and active?
Click to expand...
Click to collapse
hey thanks for the reply!
erm.... how would i do that exactly?
ive downloaded rom manager and tried to create a second partition using that, but that doesnt seem to work either?
i am close to just giving up to be honest, got a 32gb sd card and it just sitting there gathering dust while my internal memory is sucked dry of any space.

paddroid said:
hey thanks for the reply!
erm.... how would i do that exactly?
ive downloaded rom manager and tried to create a second partition using that, but that doesnt seem to work either?
i am close to just giving up to be honest, got a 32gb sd card and it just sitting there gathering dust while my internal memory is sucked dry of any space.
Click to expand...
Click to collapse
You can create and manage partitions with your pc, you just need an adaptor and than you can use "MiniTool Partition Wizard Free" that is a free partition manager tool! :good: Right click on the partition and then "set active" (both partition are primary, but one fs is EXT4 and the other one is Fat32, set active the ETX4 one) :good: