Database Develop

[Q] Soft or Hard? Bricked HTC One

Okay - Don't want to say NOOB mistake but, failure to follow direction - YES. In any case I NEED HELP!!! Like everyone else, sold my phone and attempted to put it back to stock.
Changes made - Changed to Google Edition from AT&T.
- Rooted Phone - S-OFF - Changed CID to GOOGL001 - flashed GE RUU.zip -- Enough said
Changes made to go back to stock
- Changed CID back to CWS__001 -- Turned S-On ** First mistake -- Locked bootloader -- attempted to flash ATTRUU
- Went to flash cyanogenmod just to have a rom and accidentally FORMATTED in TWRP -- 2nd mistake
I have also tried every RUU that might have an inkling of success but all i get is the 12 signature verify fail
I have tried everything twice. But with out S-OFF i think i'm dead in the water.
I tried - flashing hboot1.44 (modifing android-info) and get error
c:\androidsdk\sdk\platform-tools>fastboot flash zip hboot144.zip
target reported max download size of 1526722560 bytes
sending 'zip' (508 KB)...
OKAY [ 0.230s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.279s
** I have tried RUU.exe's but nothing will go because of the CID/HBOOT mismatch
Here is what I have
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.1700.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35GW903487
(bootloader) imei: 354439055133427
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 6.940s
** If i could just flash an hboot - I could get an RUU working but again I need S-OFF.
- Also when I try to flash cyanogenmod from recovery, it says Unable to mount system, data, can't mount **** and I assume because recovery reformatted them and the correct file systems are not in place.
FML!!! PLEASE HELP

Read Vomers great post, and follow the instructions very carefully
http://forum.xda-developers.com/showthread.php?t=2365506&page=4

Also remove your imei number from your post
Sent from my HTC One using xda app-developers app

[Q] Help Masters .request

Hello all Masters
I own HTC desire C i first did everything correct
with this thread http://forum.xda-developers.com/show....php?t=2275761
but there was no google apps and all
so i retried the same procedure with GAAP (Please forgive me i dnt remember)
and got my phone all DEAD
I have given HTC centre they says motherboard is dead u have to spent 5700 rs for the same.
as i can not bare that much money.. hard working guy..
Now
with details of error
****UNLOCKED*****
GOLFU PVT SHIP S-ON RL
HBOOT-1.31.0000
RADIO-1.10.98.15
eMMC-boot
Jul 12 2012,15:44:30
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.31.0000
(bootloader) version-baseband: 1.10.98.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.00.720.2
(bootloader) serialno: removed
(bootloader) imei: Removed
(bootloader) product: golfu
(bootloader) platform: HBOOT-7225A
(bootloader) modelid: PL0110000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4204mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e118df77
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
I have tried everything as its S-ON so can not got recovery mode
C:\android-sdk\sdk\platform-tools>adb push NaMeLeSsR0m_v7.o.0_HtCDeSiReC.zip /sd
card/
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
C:\android-sdk\sdk\platform-tools>adb devices
List of devices attached
C:\android-sdk\sdk\platform-tools>fastboot flash recovery recovery.img
sending 'recovery' (4888 KB)...
OKAY [ 0.855s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 0.932s
C:\Android>fastboot flash recovery recovery.img
sending 'recovery' (4888 KB)...
OKAY [ 0.855s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 0.932s
Nothing works for me please help
Good thing is that now adb recognise my device and i have put my memory card into samsung phone and with
the help of gold card helper i have made gold card and patched it
now i am using
RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_ 32U_5_11_05_27_release_159811_signed
i renamed rom.zip to PB99IMG.zip and kept it in sd card
now since the mobile can not do anything so i used the
RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_ 32U_5_11_05_27_release_159811_signed
clicked on next it sayd battery is less than 30%
Guys M i on right path ????

although i m not too much experienced but i would suggest you try Cyanogenmod10
i used rom files from this http://forum.xda-developers.com/showthread.php?t=2265060
i used """BUILD#3: ( WiFi Fixed ) http://forum.xda-developers.com/show...&postcount=370""""

Right idea but TOTALLY the wrong files!
Why use a PBxxxx.zip that has nothing to do with your model phone?
(the correct info is in the data you posted about HBOOT!)
Why are you flashing an RUU for bravo? This isn't even related to the Desire C in any way!
I would suggest before you brick your phone (which hopefully won't happen if you're not S-OFF or Dev Unlocked so security will stop you!) to read up in the forums on the problem you have and possible work-around/solution/s.
Most, if not all, are or have related solutions or work-arounds.
Bashing away at my HTC Desire C

[SOLVED] Deleted ROM/OS off phone by mistake :eek:!!!! HELP!

So I have done this so many times in the past playing with my HTC AMAZE 4G, to which i thought having some fun with my HTC ONE would be easy enough. But without a SD card.. i feel SOL.
I have been scouring the forums for possible fixes to no solution...
Currently I have the phone unlocked with "tampered" on the top.
My boot loader reads:
M7_UL PVT SHIP S-ON
HBOOT-1.56.0000
RADIO-4A.24.3263.09
OpenDSP-v32.120.274.0909
OS-4.19.531.10
Feb 3 2014,18:42:45.0
For all that is holy, i cannot get this thing to recognize ADB in console. I have been using Hasoon2000's AIO tool, which i used in the past on this phone and my priors.. but when I was in TWRP accidentally deleted my OS..? Everything I have tried has failed.
I am running Windows 8.1 which shouldn't be an issue with my Hboot version, so I am wondering what possible solutions there may be to get this fixed and finally get Cyanogen on this phone!
I have tried using the HTC recovery to go back to stock but i get errors when using the .zip i found which was supposed to be the RUU from the .exe HTC has out and yes i re-locked the phone for this. In terms of anything i think if i were able to get adb working i might be able to send CM11 to my phone directory and "recover" to that?
Thanks in advance!
EDIT: When i tried using the RUU zip i get this in my cmd.
sending 'zip' (227216 KB)...
OKAY [ 12.212s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 37.092s
I also ran Getvar and got this... Some people said it would help to have this info on some other threads....
C:\android-sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.531.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4161mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s

mtywe said:
EDIT: When i tried using the RUU zip i get this in my cmd.
sending 'zip' (227216 KB)...
OKAY [ 12.212s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 37.092s
Click to expand...
Click to collapse
That's not an RUU, and there is no ruu 4.19.531.10 or higher as far as i know.
so do this: http://forum.xda-developers.com/showthread.php?t=2228274&page=3

mtywe said:
So I have done this so many times in the past playing with my HTC AMAZE 4G, to which i thought having some fun with my HTC ONE would be easy enough. But without a SD card.. i feel SOL.
I have been scouring the forums for possible fixes to no solution...
Currently I have the phone unlocked with "tampered" on the top.
My boot loader reads:
M7_UL PVT SHIP S-ON
HBOOT-1.56.0000
RADIO-4A.24.3263.09
OpenDSP-v32.120.274.0909
OS-4.19.531.10
Feb 3 2014,18:42:45.0
For all that is holy, i cannot get this thing to recognize ADB in console. I have been using Hasoon2000's AIO tool, which i used in the past on this phone and my priors.. but when I was in TWRP accidentally deleted my OS..? Everything I have tried has failed.
I am running Windows 8.1 which shouldn't be an issue with my Hboot version, so I am wondering what possible solutions there may be to get this fixed and finally get Cyanogen on this phone!
I have tried using the HTC recovery to go back to stock but i get errors when using the .zip i found which was supposed to be the RUU from the .exe HTC has out and yes i re-locked the phone for this. In terms of anything i think if i were able to get adb working i might be able to send CM11 to my phone directory and "recover" to that?
Thanks in advance!
EDIT: When i tried using the RUU zip i get this in my cmd.
sending 'zip' (227216 KB)...
OKAY [ 12.212s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 37.092s
I also ran Getvar and got this... Some people said it would help to have this info on some other threads....
C:\android-sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.531.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4161mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
Boot your phone in custom recovery
adb push name_of_rom.zip /sdcard/
Wait for the file to transfer (5-10 min)
Install your rom
Sent from my HTC One using XDA Free mobile app

alray said:
Boot your phone in custom recovery
adb push name_of_rom.zip /sdcard/
Wait for the file to transfer (5-10 min)
Install your rom
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
so i run adb push and it shows the time and bytes of the file... but does not show up in my /sdcard/
i also tried sideloading... and got this error, once it finishes loading it over:E:Error executing updator binary in zip '/data/ updating partition details
i think i ran into the same issue two years back when I tried getting pure CM on my last phone...
any ideas?

mtywe said:
i also tried sideloading... and got this error, once it finishes loading it over:E:Error executing updator binary in zip '/data/ updating partition details
i think i ran into the same issue two years back when I tried getting pure CM on my last phone...
any ideas?
Click to expand...
Click to collapse
what is your twrp version?
you might also read this: http://wiki.cyanogenmod.org/w/Install_CM_for_m7

alray said:
what is your twrp version?
you might also read this:
Click to expand...
Click to collapse
OLD.... updating to the newest version now.

alray said:
what is your twrp version?
you might also read this: ]
Click to expand...
Click to collapse
Looks like we have a success!
I tried using the sideloader first which failed but adb push did the trick.
Thanks for the help!

mtywe said:
Looks like we have a success!
I tried using the sideloader first which failed but adb push did the trick.
Thanks for the help!
Click to expand...
Click to collapse
:good:
can you edit your thread title to add [Solved] ?

M7 only boots into bootloader

Was trying to put my HTC One M7 back to stock to give to my mother-inlaw. I was planning on running an RUU on it, so I relocked the bootloader and ever since I can't seem to do anything with it. It will only boot into the bootloader. I can't seem to unlock it using htc dev now either. any ideas? Any help is appreciated.
This is some info.
C:\adb>fastboot getvar -all
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-microp: None
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4301mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
-all: Done!
finished. total time: 16.711s

When I try to unlock it, this is what I see in my CMD prompt.
C:\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.004s]
finished. total time: 0.147s
But nothing ever comes up on my phone like it shows in the instructions.

HuMpS 97 DoHc said:
When I try to unlock it, this is what I see in my CMD prompt.
C:\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.004s]
finished. total time: 0.147s
But nothing ever comes up on my phone like it shows in the instructions.
Click to expand...
Click to collapse
what is your original cid number, because 11111111 wont be the original, you cant unlock the bootloader as you locked it with a custom recovery on there, and now the only way to get stock recovery on there or flash an RUU is to know your original cid or version main.

Seanie280672 said:
what is your original cid number, because 11111111 wont be the original, you cant unlock the bootloader as you locked it with a custom recovery on there, and now the only way to get stock recovery on there or flash an RUU is to know your original cid or version main.
Click to expand...
Click to collapse
BM___001 would be my cid.

I've changed my CID back to stock. Now what did I need to do? I can't seem to find an RUU for Bell mobility anywhere.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT346W903917
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4188mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.051s

When I try to apply a Bell RUU from this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 This is the error message I get. Any ideas or help???
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... OKAY
Execution time is 40(ms)
C:\adb>htc_fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\adb>htc_fastboot flash zip RUU.zip
error: preprocess_file : Cannot open file RUU.zip
C:\adb>htc_fastboot flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 2.972 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (status read failed (Too many links))
Execution time is 9(s)
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... FAILED (status read failed (Unknown error))
Execution time is 5(s)

HuMpS 97 DoHc said:
When I try to apply a Bell RUU from this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 This is the error message I get. Any ideas or help???
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... OKAY
Execution time is 40(ms)
C:\adb>htc_fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\adb>htc_fastboot flash zip RUU.zip
error: preprocess_file : Cannot open file RUU.zip
C:\adb>htc_fastboot flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 2.972 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (status read failed (Too many links))
Execution time is 9(s)
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... FAILED (status read failed (Unknown error))
Execution time is 5(s)
Click to expand...
Click to collapse
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
Click to expand...
Click to collapse
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)

alray said:
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
Click to expand...
Click to collapse
I removed my imei, thanks. I honestly thought this phone was S-OFF but I hadn't actually used it for much in over a year since I have a m8. Do you have any ideas of what I can do? my bootloader is now relocked and I can't seem to unlock it.

So i was able to flash a signed firmware onto my phone which for my carrier Bell Mobility, its 3.23.666.1. But now where can I go? i still can't seem to unlock the bootloader. any ideas?
my getvar info now.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.23.666.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3747mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-a6a74fd020
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.234s

Anyone with any ideas??? Please.

HuMpS 97 DoHc said:
Anyone with any ideas??? Please.
Click to expand...
Click to collapse
sorry I struggle to get on here sometimes during the week as my work takes over my life.
could you post a link to the 3.xx.666.x firmware you flashed please.

thats the firmware I used. https://www.dropbox.com/s/m1mha8jx36ceoe5/firmware.zip?dl=0
alray said:
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
Click to expand...
Click to collapse
Seanie280672 said:
sorry I struggle to get on here sometimes during the week as my work takes over my life.
could you post a link to the 3.xx.666.x firmware you flashed please.
Click to expand...
Click to collapse

HuMpS 97 DoHc said:
thats the firmware I used. https://www.dropbox.com/s/m1mha8jx36ceoe5/firmware.zip?dl=0
Click to expand...
Click to collapse
I'm unable to check it just yet, but it's just a zip file, so make sure it contains recovery.img, also when you flash it, you will need to flash it twice as the first time is just a pre update, after that, check that you have stock recovery by selecting recovery from the bootlpader screen, you should be presented with a red exclamation mark, volume up and power to get the menu, select factory reset.
Now boot to the bootloader and get a new unlock token from HTC dev website, and try and unlock your bootloader, once done, you can then flash twrp recovery, and flash your stock backup, will post the link later, then reflash stock recovery and update, or try and get s-off with rumrunner before updating.

My AT&T HTC One M7.. Help?

Okay so, I was being all in awe because this was my first root, and I did it, but here's the messy bit, I kept installing ROMs and it felt messy so I went into TWRP (Version: 2.6.3.0) and I sort of went into advanced restore/reset options and I checked off everything. Bad idea by the way. So to sum it up this far, I uninstalled the operating system. The original backup of the original stock ROM was on the phone, it's now lost. I've been trying for days to fix it, and I know I messed up big , I re-locked the phone and I cannot get it to unlock again, so I lost access to TWRP, and I just want my phone back.. When I try to flash anything, from my experience anyways, it says (in this example, the TWRP img file, for recovery),
"C:\HTCOneRoot>fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
sending 'recovery' (8432 KB)...
OKAY [ 1.065s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.073s"
Really, I just want the stock ROM and for this all to be over. If someone could possibly help me, I'd love it. The phone is also AT&T, and the SIM card is disabled for the most part, it's an old phone from my (almost) uncle. As for the info I could get from fastboot:
"C:\HTCOneRoot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4221mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 3.872s"
Sorry for the spam bit, please help? I'm honestly lost. If this problem does get resolved, and I'm honestly not sure it will, I'm also interested in a good, stable Lollipop ROM for my HTC One M7. Thanks! :fingers-crossed:

acars123 said:
Okay so, I was being all in awe because this was my first root, and I did it, but here's the messy bit, I kept installing ROMs and it felt messy so I went into TWRP (Version: 2.6.3.0)
Click to expand...
Click to collapse
2.6.3.0 is outdated, you won't be able to flash any recent rom with this, latest is 2.8.6.0
I re-locked the phone and I cannot get it to unlock again
Click to expand...
Click to collapse
Because you have relocked with a custom recovery installed. Unlocking the bootloader require the stock recovery to be installed.
"C:\HTCOneRoot>fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
sending 'recovery' (8432 KB)...
OKAY [ 1.065s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
Click to expand...
Click to collapse
Signature verify fail, its normal your bootloader is locked...
Really, I just want the stock ROM and for this all to be over.
Click to expand...
Click to collapse
flash the 1.26.502.12 RUU
The phone is also AT&T, and the SIM card is disabled for the most part
Click to expand...
Click to collapse
You will need an active at&t sim card if you want to update the phone. At&t phone only receives update if they are connected to the at&t network.
"C:\HTCOneRoot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4221mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Remove your IMEI and SERIALNO from your first post

@alray Thank you! Sorry I may have been a bother, but thank you so much!