I installed Rom but without changing kernel. so my phone wait for sony ericsson screen. had been before and using SEUS previously had fixed. But now definitely does not open and also install any drive, USB not connected flashtool,flashtool drivers, seus .pc comp. does not work. because it does not respond to usb. what should I do
(in addition my english is not good. I hope I've expressed properly )
samet.erdem.e said:
I installed Rom but without changing kernel. so my phone wait for sony ericsson screen. had been before and using SEUS previously had fixed. But now definitely does not open and also install any drive, USB not connected flashtool,flashtool drivers, seus .pc comp. does not work. because it does not respond to usb. what should I do
(in addition my english is not good. I hope I've expressed properly )
Click to expand...
Click to collapse
that is softbrick
many answers here..use search button
Try this method
- download the stock firmware from my signature
- flash it with flash tool
- wwaalllaahhh! DONE!
u get your phone on 2.1 firmware
make sure if u want to flash ROM!
see the requirements first!
BlackRabbit1703 said:
that is softbrick
many answers here..use search button
Try this method
- download the stock firmware from my signature
- flash it with flash tool
- wwaalllaahhh! DONE!
u get your phone on 2.1 firmware
make sure if u want to flash ROM!
see the requirements first!
Click to expand...
Click to collapse
okey ı can dowload stok rom but ı need with connect usb for use flash tool.
my computer does not see usb and seus.
ı cant install drivers so ı connect with usb its does not work.
maybe you say how my computer can recognize the usb device.
ı can ring back to orıgınal format and then ı can install the rom with kernel
samet.erdem.e said:
okey ı can dowload stok rom but ı need with connect usb for use flash tool.
my computer does not see usb and seus.
ı cant install drivers so ı connect with usb its does not work.
maybe you say how my computer can recognize the usb device.
ı can ring back to orıgınal format and then ı can install the rom with kernel
Click to expand...
Click to collapse
Just install Gordon gate drivers It's in Drivers folder of flashtool I hoped.. Just advice..
install flashtool driver from C:/Flashtool/driver
x8 driver
gordons gates
if the above solutions won't work it is either the USB driver of your x8 that is not working anymore
How to Install SEMC_Signed Xperia X8 Drivers ?
Hey Guys, I am using Windows 7 and I am trying to install SEMC_Signed Xperia X8 drivers !! But i don't know where i install It !!
Help me
Related
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now
lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.
eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!
use the update service
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!
how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel
Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.
X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D
Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum
I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA
eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped
hey guys.i have only one working pc in the house,and thats my moms pc.i am not actually allowed to be on this pc,but as i cracked the password,im on it over the night (such as right now).so,i did everything through that pc,rooted my phone,unlocked my bootloader,flashed my first kernel...so the problems started when i tried to flash my second kernel.thats nobodyAtall's ics kernel.so i tried,and i had the flash tool all set,gordon's gate drivers and SEMC drivers also installed,antivirus disabled...and i can easly connect my phone to my pc,in debugging mode,everything,except flash mode.yes,my pc doesnt recognize it only in flash f***ing mode.the flashtools from 2.9.1 and above do work with x8,and 2.9.1 doesnt even find it,and 6.7.0 says:''xperia found in flash mode''
and when i try to flash a kernel:''error.kernel installation aborted.''
i have uninstalled and reinstalled flashtool,all drivers,redownloaded all...and nothing worked.at the end i have installed ics kernel on my girlfriends pc,but now i want to go back to gingerbread again,and still nothing.I'VE EVEN WANTED TO REFLASH STOCK KERNEL AND ROM WITH SONY ERICSSON UPDATE SERVICE BUT IT ALSO DIDNT FIND MY PHONE!!!
help guys...you are my last chance...
there is a software named wotan client, try it to restore your phone to stock rom.
Try Flashtool 2.9.1
Flashtool 6.x.x creates problems for me
Tips-
-make sure usb debugging is on
-gordon's gate installed
or-install SEMC drivers manually
How to install semc drivers manually?
Sent from my E15i using Tapatalk
Connect your phone in debugging mode go to device manager (maybe don't remember) in control panel the find the semc device there you can install drivers
Ps try to pull out the battery leave it for a couple of minutes and then connect flash mode
Cheers
Sent from my E15i using xda premium
Doesnt work on my pc.i dont know what to do.it works on my gf‘s laptop...
Sent from my LG-P350 using Tapatalk
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
what exactly did you do? write all the steps
Ok I think it works now, I needed to switch to MSC mode Thanks anyway
well, the phone needs to be turned off
+ drivers installed,lpl
Sent from my E15i using xda premium
+ holding back button while connecting USB
Is it important how did i send this?
Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,
I think you don't:laugh: turn on debugging
yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates
Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you
phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone
Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$
My x8 is unlock bootloader with stock rom and kernel, i want to flash custrom but win 7 not showing pop up semc usb flash driver,, mx 8 just charging but pc companion detected. When flash with flash tool showing xperia 2011 line make sure not in mtp mode, i have check usb debuging, unknown source, and flashtool driver too. What should i do?
Sent from my AD683G using xda app-developers app
Actually you dont have to care about the warning "Make sure that Xperia 2011 lineup phones in not connected in MTP mode" as Xperia X8 is a 2010 device. Did you try to flash something to your phone? I think most probably it will work without any problems. If not then did you install GordonGate drivers? If you havent then go to the Flashtools folder and then go to /Drivers folder and install those drivers.
You installed drivers ?
install all driver from my files
here
Gordon Gates
[http://www.mediafire.com/download/cbnqekclgl734k8/USB_Flash_Driver(Gordon's_Gate).rar]
Flashtool Driver
[http://www.mediafire.com/download/3rp5hhb38xadrnz/Flashtool-drivers.rar]
X8 Driver
[http://www.mediafire.com/download/spbmr44tfs3m2ua/X8_drivers.zip]
BlackRabbit1703 said:
install all driver from my files
here
Gordon Gates
[http://www.mediafire.com/download/cbnqekclgl734k8/USB_Flash_Driver(Gordon's_Gate).rar]
Flashtool Driver
[http://www.mediafire.com/download/3rp5hhb38xadrnz/Flashtool-drivers.rar]
X8 Driver
[http://www.mediafire.com/download/spbmr44tfs3m2ua/X8_drivers.zip]
Click to expand...
Click to collapse
Or he can just go in Flashtool-drivers and install it(you have to choose X8 Drivers and Flash Drivers(on bottom))
search on google "semc usb flash driver" and install manually.. or try this, turn of a phone > connect to pc with usb cable > press back. wait till drivers installed on ur pc..
how can downgrade my xperia Z1 after installing nougat AOSP
I'm using Ubuntu 16.04
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
m3asmi said:
how can downgrade my xperia Z1 after installing nougat AOSP
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
Click to expand...
Click to collapse
have you check android debugging and unknown sources?
pattriccio said:
have you check android debugging and unknown sources?
Click to expand...
Click to collapse
yes I did
I installed flashtool in windows now I solved the problem
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
ajdin.cekic said:
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
Click to expand...
Click to collapse
follow this tutorial https://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
ajdin.cekic said:
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
Click to expand...
Click to collapse
OK, so I'm gonna assume that you have at least a working recovery. Here's a possible solution: Have you tried flashing a stock based custom ROM (e.g: Kryptonian, MX Rom or DStrikers Z1 Kai)? Then, from there you can flash a pure stock via flashtool.
guys, this was mentioned a couple times already, best way is to download Emma from Sony and flash the official software. Then you can flash a kernel via fastboot again and all should work. This is due to Nougat is corrupting the apps log partition which is not in use there, but is required for stock Lollipop. I did that a couple times and all worked fine...
Ok, i will try the mxrom and than, but i tried that already and do i need first to lock my bootloader and then flash stock, emma didnt recognice my phone same as flashtool and one thing more, i tried to flash kernel sin from ftf via fastboot bud it says image is not boot image and says fail. I tried on win 10 same to do win recognizes phone as somc bit flashtool doesnt recognize phone.