Semc usb flash driver win7 problem - XPERIA X8 Q&A, Help & Troubleshooting

My x8 is unlock bootloader with stock rom and kernel, i want to flash custrom but win 7 not showing pop up semc usb flash driver,, mx 8 just charging but pc companion detected. When flash with flash tool showing xperia 2011 line make sure not in mtp mode, i have check usb debuging, unknown source, and flashtool driver too. What should i do?
Sent from my AD683G using xda app-developers app

Actually you dont have to care about the warning "Make sure that Xperia 2011 lineup phones in not connected in MTP mode" as Xperia X8 is a 2010 device. Did you try to flash something to your phone? I think most probably it will work without any problems. If not then did you install GordonGate drivers? If you havent then go to the Flashtools folder and then go to /Drivers folder and install those drivers.

You installed drivers ?

install all driver from my files
here
Gordon Gates
[http://www.mediafire.com/download/cbnqekclgl734k8/USB_Flash_Driver(Gordon's_Gate).rar]
Flashtool Driver
[http://www.mediafire.com/download/3rp5hhb38xadrnz/Flashtool-drivers.rar]
X8 Driver
[http://www.mediafire.com/download/spbmr44tfs3m2ua/X8_drivers.zip]

BlackRabbit1703 said:
install all driver from my files
here
Gordon Gates
[http://www.mediafire.com/download/cbnqekclgl734k8/USB_Flash_Driver(Gordon's_Gate).rar]
Flashtool Driver
[http://www.mediafire.com/download/3rp5hhb38xadrnz/Flashtool-drivers.rar]
X8 Driver
[http://www.mediafire.com/download/spbmr44tfs3m2ua/X8_drivers.zip]
Click to expand...
Click to collapse
Or he can just go in Flashtool-drivers and install it(you have to choose X8 Drivers and Flash Drivers(on bottom))

search on google "semc usb flash driver" and install manually.. or try this, turn of a phone > connect to pc with usb cable > press back. wait till drivers installed on ur pc..

Related

Help me before i smash everything.

hey guys.i have only one working pc in the house,and thats my moms pc.i am not actually allowed to be on this pc,but as i cracked the password,im on it over the night (such as right now).so,i did everything through that pc,rooted my phone,unlocked my bootloader,flashed my first kernel...so the problems started when i tried to flash my second kernel.thats nobodyAtall's ics kernel.so i tried,and i had the flash tool all set,gordon's gate drivers and SEMC drivers also installed,antivirus disabled...and i can easly connect my phone to my pc,in debugging mode,everything,except flash mode.yes,my pc doesnt recognize it only in flash f***ing mode.the flashtools from 2.9.1 and above do work with x8,and 2.9.1 doesnt even find it,and 6.7.0 says:''xperia found in flash mode''
and when i try to flash a kernel:''error.kernel installation aborted.''
i have uninstalled and reinstalled flashtool,all drivers,redownloaded all...and nothing worked.at the end i have installed ics kernel on my girlfriends pc,but now i want to go back to gingerbread again,and still nothing.I'VE EVEN WANTED TO REFLASH STOCK KERNEL AND ROM WITH SONY ERICSSON UPDATE SERVICE BUT IT ALSO DIDNT FIND MY PHONE!!!
help guys...you are my last chance...
there is a software named wotan client, try it to restore your phone to stock rom.
Try Flashtool 2.9.1
Flashtool 6.x.x creates problems for me
Tips-
-make sure usb debugging is on
-gordon's gate installed
or-install SEMC drivers manually
How to install semc drivers manually?
Sent from my E15i using Tapatalk
Connect your phone in debugging mode go to device manager (maybe don't remember) in control panel the find the semc device there you can install drivers
Ps try to pull out the battery leave it for a couple of minutes and then connect flash mode
Cheers
Sent from my E15i using xda premium
Doesnt work on my pc.i dont know what to do.it works on my gf‘s laptop...
Sent from my LG-P350 using Tapatalk

[Q] "unknown device" using nAa v.11, is it normal?

Hi, just want to ask simple question.
is it normal to have an "unknown device" error on my win XP. this happen on activating debug enable on my unlock X8 using nAa v.11, current ROM is Xperience SEMC Debrand Engine.
i already installed adb driver and x8 gordons gate, which is working fine on stock kernel, but somehow this error is always popup when i use custom kernel.
Do you have PC Companion installed also?
Sent from my X8 to your screen
not at the moment, but i think it run quite well the gordons gate driver and the semc adb driver on stock rom.
but i noticed when the first time using the custom kernel, it always pop up unknown device on my PC.
just want to ask if its normal or not?
btw Chris95X8, do you have that kind of error "unrecognized device" using alfs kernel? (i see your signature, you using alfs?)
My Win7 has always recognized my phone when mounting the SD card and when enabling debugging for development purposes.
I know that PC Companion installs some required adb drivers.
Maybe it's your Win XP...
Sent from my X8 to your screen
i see. oh btw Chris, i already install PC Companion, but... i got "No phone connected", even after following the pc companion step, it stop at step 2 (CONNECT). any idea?
oh ya btw i already follow some instruction on this thread also http://forum.xda-developers.com/showthread.php?t=973263.
thx Chris95X8, you are right its because of the XP
i tried using my laptop (win7), the ADB Driver and Gordon gate working flawlessly, i even can use the x8 toolbox again.
Thanks Man

[Q] ADB driver not work after BL unlocked ?

Before unlocking BL, my pc recognized x8 as SEMC USB drive, and the ADB driver from SE site work fine. But after I unlocked it, pc now recognize it as SEMC HSUSB drive, and the driver won't work anymore. Help, pls.
Yes, the name is SEMC HSUSB because you turned on USB Debugging.
If the driver won't work, try to uninstall the driver, then install it again.
It's not work. I even reinstalled Windows but I still can't install driver.
Sent from my X8 using xda app-developers app

[Q] x8 usb don't connect and anything drivers

I installed Rom but without changing kernel. so my phone wait for sony ericsson screen. had been before and using SEUS previously had fixed. But now definitely does not open and also install any drive, USB not connected flashtool,flashtool drivers, seus .pc comp. does not work. because it does not respond to usb. what should I do
(in addition my english is not good. I hope I've expressed properly )
samet.erdem.e said:
I installed Rom but without changing kernel. so my phone wait for sony ericsson screen. had been before and using SEUS previously had fixed. But now definitely does not open and also install any drive, USB not connected flashtool,flashtool drivers, seus .pc comp. does not work. because it does not respond to usb. what should I do
(in addition my english is not good. I hope I've expressed properly )
Click to expand...
Click to collapse
that is softbrick
many answers here..use search button
Try this method
- download the stock firmware from my signature
- flash it with flash tool
- wwaalllaahhh! DONE!
u get your phone on 2.1 firmware
make sure if u want to flash ROM!
see the requirements first!
BlackRabbit1703 said:
that is softbrick
many answers here..use search button
Try this method
- download the stock firmware from my signature
- flash it with flash tool
- wwaalllaahhh! DONE!
u get your phone on 2.1 firmware
make sure if u want to flash ROM!
see the requirements first!
Click to expand...
Click to collapse
okey ı can dowload stok rom but ı need with connect usb for use flash tool.
my computer does not see usb and seus.
ı cant install drivers so ı connect with usb its does not work.
maybe you say how my computer can recognize the usb device.
ı can ring back to orıgınal format and then ı can install the rom with kernel
samet.erdem.e said:
okey ı can dowload stok rom but ı need with connect usb for use flash tool.
my computer does not see usb and seus.
ı cant install drivers so ı connect with usb its does not work.
maybe you say how my computer can recognize the usb device.
ı can ring back to orıgınal format and then ı can install the rom with kernel
Click to expand...
Click to collapse
Just install Gordon gate drivers It's in Drivers folder of flashtool I hoped.. Just advice..
install flashtool driver from C:/Flashtool/driver
x8 driver
gordons gates
if the above solutions won't work it is either the USB driver of your x8 that is not working anymore
How to Install SEMC_Signed Xperia X8 Drivers ?
Hey Guys, I am using Windows 7 and I am trying to install SEMC_Signed Xperia X8 drivers !! But i don't know where i install It !!
Help me

XPERIA - Z, FLASH MODE detects - QHSUSB_DLOAD, Unable to Flash

Hi XP- Z users/Developers
I am using wonderful Flashtool latest version and install the drivers for the same.
My XPERIA-Z is C6603 US version with locked Bootloader.
To go in Flash mode using Volume DN + Cable to PC, my WIN7 detects the XP-Z as QHSUSB_DLOAD, and Flashtool doesnt detect it as flashmode.
After researching for hours I learned GordonGate Flash Drivers would instantiate the FlashMode USB composition, but I am not sure which driver to load.
If I try mannually pointing the driver to QHSUSB_DLOAD with Gordon-gate Drivers it gives following ceritified drivers,
a) Generic FLash Device
b) SEMC AB900 Device
c) SEMC Flash Device
d) SEMC ETS/DFU etc etc device
I tried all but none of them worked, hence its stucked at QHSUSB_DLOAD Qualcomm Mode driver and FLash tool doesnt work.
Any Help would be appreciated.
Android 4.1.1 and kernel 3.4
Thanks
Download sony service update it has all the drivers needed.
Sent from my C6603 using xda premium
Thanks, can someone send the link?
I tried service update, its still not able to detect the QHSUSB_DLOAD Driver to ccorressponding SONY drivers, can someone post which is the driver SONY use for the flash mode, what its instantiated as? Currently its showing standard Qualcomm D Loader i.e used for OEM for flahmode, hence we need the right equivalent VID and PID which Sony uses for Qualcomm D Loader api for APQ-8064 Chip
Any update ???? i run into exactly same problem with my Xperia V (LT25i)..... help will be appreciated.
Maybe try another pc?Windows7
Sent from my C6603 using xda premium
I am also looking for the right driver, why isn't win7 detecting it, which should i force onto the unknow device? All i tried so far didnt work.

Categories

Resources