XPERIA - Z, FLASH MODE detects - QHSUSB_DLOAD, Unable to Flash - Xperia Z Q&A, Help & Troubleshooting

Hi XP- Z users/Developers
I am using wonderful Flashtool latest version and install the drivers for the same.
My XPERIA-Z is C6603 US version with locked Bootloader.
To go in Flash mode using Volume DN + Cable to PC, my WIN7 detects the XP-Z as QHSUSB_DLOAD, and Flashtool doesnt detect it as flashmode.
After researching for hours I learned GordonGate Flash Drivers would instantiate the FlashMode USB composition, but I am not sure which driver to load.
If I try mannually pointing the driver to QHSUSB_DLOAD with Gordon-gate Drivers it gives following ceritified drivers,
a) Generic FLash Device
b) SEMC AB900 Device
c) SEMC Flash Device
d) SEMC ETS/DFU etc etc device
I tried all but none of them worked, hence its stucked at QHSUSB_DLOAD Qualcomm Mode driver and FLash tool doesnt work.
Any Help would be appreciated.
Android 4.1.1 and kernel 3.4
Thanks

Download sony service update it has all the drivers needed.
Sent from my C6603 using xda premium

Thanks, can someone send the link?

I tried service update, its still not able to detect the QHSUSB_DLOAD Driver to ccorressponding SONY drivers, can someone post which is the driver SONY use for the flash mode, what its instantiated as? Currently its showing standard Qualcomm D Loader i.e used for OEM for flahmode, hence we need the right equivalent VID and PID which Sony uses for Qualcomm D Loader api for APQ-8064 Chip

Any update ???? i run into exactly same problem with my Xperia V (LT25i)..... help will be appreciated.

Maybe try another pc?Windows7
Sent from my C6603 using xda premium

I am also looking for the right driver, why isn't win7 detecting it, which should i force onto the unknow device? All i tried so far didnt work.

Related

Semc usb flash driver win7 problem

My x8 is unlock bootloader with stock rom and kernel, i want to flash custrom but win 7 not showing pop up semc usb flash driver,, mx 8 just charging but pc companion detected. When flash with flash tool showing xperia 2011 line make sure not in mtp mode, i have check usb debuging, unknown source, and flashtool driver too. What should i do?
Sent from my AD683G using xda app-developers app
Actually you dont have to care about the warning "Make sure that Xperia 2011 lineup phones in not connected in MTP mode" as Xperia X8 is a 2010 device. Did you try to flash something to your phone? I think most probably it will work without any problems. If not then did you install GordonGate drivers? If you havent then go to the Flashtools folder and then go to /Drivers folder and install those drivers.
You installed drivers ?
install all driver from my files
here
Gordon Gates
[http://www.mediafire.com/download/cbnqekclgl734k8/USB_Flash_Driver(Gordon's_Gate).rar]
Flashtool Driver
[http://www.mediafire.com/download/3rp5hhb38xadrnz/Flashtool-drivers.rar]
X8 Driver
[http://www.mediafire.com/download/spbmr44tfs3m2ua/X8_drivers.zip]
BlackRabbit1703 said:
install all driver from my files
here
Gordon Gates
[http://www.mediafire.com/download/cbnqekclgl734k8/USB_Flash_Driver(Gordon's_Gate).rar]
Flashtool Driver
[http://www.mediafire.com/download/3rp5hhb38xadrnz/Flashtool-drivers.rar]
X8 Driver
[http://www.mediafire.com/download/spbmr44tfs3m2ua/X8_drivers.zip]
Click to expand...
Click to collapse
Or he can just go in Flashtool-drivers and install it(you have to choose X8 Drivers and Flash Drivers(on bottom))
search on google "semc usb flash driver" and install manually.. or try this, turn of a phone > connect to pc with usb cable > press back. wait till drivers installed on ur pc..

[Q] unable to connect xperia z in flashmode

Hi
I'm unable to connect my xperia z in flash mode.
it is detected in fast boot mode but when i connect it in flash mode the green light is shown for one second and then not.
i'm using windows 8 with flash tool 0.9.11.0 .
I have tried everything re installing drivers formatting windows and all .
please tell me what to do?
Follow this guide to setup Flashtool and drivers - How to flash stock roms with Flashtool
There's a specific section on installing the drivers under Windows 8.
If you still can't get it to connect in Flashmode, try a different USB port or cable or even a different PC.
Sent from my C6603 using Tapatalk 4
Run a driver check on flashtool in settings which will tell you if drivers are installed. There are a couple of links in my sig which you might want to read.
Sent from my C6603 using XDA Premium 4 mobile app

[Q] Bootloop Xperia Z with new routing procedure for newest firmware 10.3.1.A.0.244

Hi!
I have a C6603 JB 4.2.2 (10.3.1.A.0.244) which should meet all current requirement for DooMLoRDs latest how to http://forum.xda-developers.com/showthread.php?t=2386405.
After a failure I rebuild the phone using EMMA, so I'm using the phone freshly set-up, USB-debugging and apps from unknown sources is activated.
I flashed XperiaZ_C660X_KernelOnly_10.3.A.0.423_Generic_NL.f tf with flash tool 0.9.13.0 after restarting the phone is stuck in a bootloop.
Anything that might be wrong with the kernel file used or does this sound like a problem with the flash tool (which was downloaded, installed and running without antivirus software, ending the session without any error messages). When flashing in Flashmode no exclusions or misc. actions were marked.
Any suggestions? Thank you!
Best regards,
Maximilian
Just use this - http://forum.xda-developers.com/showthread.php?t=1886460
It can root 244 directly.
Sent from my C6603 using Tapatalk
Thanx. I connected the phone which is correctly reported as Portable Device/Xperia Z and Sony sa0107 ADB Interface Driver but "stuff\adb devices" in command shows the device CB5A*****2C "offline"
What does it mean the phone is offline? USB debugging is on, screen is unlocked - sorry, I don't know how to proceed.
Not Found?
Device is reported correctly in the system:
Sony sa0 107 ADB Interface
But it's not recognized by the script.
Make sure anything else that uses ADB, like the Sony PC Companion or SUS is not running.
Try a different USB cable/port or PC.
Sent from my C6603 using Tapatalk

Need Help Flashtool? my device?

I don't even know how to start...
Just say, I want to try a lollipop on zr c5502.
and downloaded a fw from Xperifirm (and converted to ftf) and this tread http://forum.xda-developers.com/xperia-zr/general/stock-lollipop-android-5-0-2-build-10-6-t3114391
No error both while downloading.
But, I cant install either via flashtool
Firstly, my device wont get in flashmode green led only flash less than a second before gone. But flashtool said its connected, surely I cant flash anything.
I try fastboot blue led stay there, but flashtool dont show my device was connect in fastboot mode.
Then flashtool always show Device connected in flash mode. and I don't even connect my device to pc.
I've tried reinstall flashtool
change my usb cable and port
remove sd card from my phone
remove other usb component but mouse and keyboard
reinstall all flashtool driver.
Still problem
More data I can provide.
- Flashtool 0.9.18.5
- Xperifirm 4.5.3
- Windows 8.1 x64
- My device still working no bootloop, brick or anything wrong no button stuck or something like that
- Already bootloader unlocked
- My pc too
here a log from flashtool, while I doesn't connect my phone to my pc
23/014/2015 00:14:03 - INFO - Flashtool Version 0.9.18.5 built on 14-02-2015 15:30:00
23/014/2015 00:14:03 - INFO - Executing search strategies to find proxy selector
23/014/2015 00:14:03 - INFO - No proxy found for IE. Trying next one
23/014/2015 00:14:03 - INFO - Strategy firefox failed trying next one : No Firefox installation found
23/014/2015 00:14:03 - INFO - No proxy found for java. Trying next one
23/014/2015 00:14:32 - INFO - Syncing devices from github
23/014/2015 00:14:32 - INFO - Scanning devices folder for changes.
23/014/2015 00:14:37 - INFO - Pulling changes from github.
23/014/2015 00:14:41 - INFO - Devices sync finished.
23/014/2015 00:14:46 - INFO - Device connected in flash mode
can anyone help? thank you
Hi ZervZ,
First off, are you sure you have the proper usb drivers installed ?
also make sure to end any running adb connections by other software, ie: if you have bluestacks, genymotion or any other android emulator, make sure to close it completely and end the adb process using task manager (just to avoid any conflicts)
third, how do you boot in fastboot mode ?
it should be : completely turn off your device, connect the usb cable to the PC usb port (not the mobile yet), now press and keep holding the volume down key, while holding the volume down connect the micro usb to the device and continue holding the volume down key.
If this wasn't what you were doing, try it out and let me know what happend.
I'm surely a usb driver are properly installed. Every device but my phone work properly.
For flashtool drivers. Firstly, I've try installed only my device and flashmode+fastboot drivers = not working
then installed all driver that driver pack delivered = not working too. (both install with driver signing off, all green)
I'm not using or even installed any android emulator on my pc. only one program that I aware of conflict with flashtool is sony pc companion, which I'm not open it at all.
how I get in fastboot, same method as you provide but I used vol up, vol down for flashmode .(neither working with flashtool, even I've a blue led on, they still shown Ive connected in flashmode)
Now I'm try to uninstall a semc flash device driver and s1 service.
I think its a source of my problem, but problem is I can't. haha.
Might be need reinstall my windows
Edit: After I've restore my windows to the point before Ive install any drivers. Problem still persist, now its get worst, because pcc shown Ive connected sony device all the time .(same with flashtool.)
ZervZ said:
I'm surely a usb driver are properly installed. Every device but my phone work properly.
For flashtool drivers. Firstly, I've try installed only my device and flashmode+fastboot drivers = not working
then installed all driver that driver pack delivered = not working too. (both install with driver signing off, all green)
I'm not using or even installed any android emulator on my pc. only one program that I aware of conflict with flashtool is sony pc companion, which I'm not open it at all.
how I get in fastboot, same method as you provide but I used vol up, vol down for flashmode .(neither working with flashtool, even I've a blue led on, they still shown Ive connected in flashmode)
Now I'm try to uninstall a semc flash device driver and s1 service.
I think its a source of my problem, but problem is I can't. haha.
Might be need reinstall my windows
Edit: After I've restore my windows to the point before Ive install any drivers. Problem still persist, now its get worst, because pcc shown Ive connected sony device all the time .(same with flashtool.)
Click to expand...
Click to collapse
have you installed the drivers for ZR itself? when u installed Flashmode and fastboot drivers, u must have missed to tick the drivers for Lagan, Fusion3 board which are for ZR. reinstall all 3 I mentioned above and see if it works,
Also what version of flashtool are ou using? I am using 9.13 for my ZR which is recommended by the dev for first Z series phones. u may want to consider that as well
sourabhp said:
have you installed the drivers for ZR itself? when u installed Flashmode and fastboot drivers, u must have missed to tick the drivers for Lagan, Fusion3 board which are for ZR. reinstall all 3 I mentioned above and see if it works,
Also what version of flashtool are ou using? I am using 9.13 for my ZR which is recommended by the dev for first Z series phones. u may want to consider that as well
Click to expand...
Click to collapse
Well, yes I installed Lagan board on my my 1st try. Its wasn't work.
Then I just installed all of them, still wont work. Or even no driver installed from driver package. (only flashtool and connect my phone) that wont work too.
Same problem, but it can connected on 1st try, if I try to flash anything they will error and stay connected in flashmode again (Until I uninstalled a driver & reboot my pc)
As I said, flashtool 0.9.18 since its a latest version, might try 0.9.13 :good:
And.. I cant repair my phone via pcc too. Since they need to get in flashmode :crying:
have u tried http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/ ?
Bootloader is unlocked so you can not repair using PCC
sourabhp said:
have u tried http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/ ?
Bootloader is unlocked so you can not repair using PCC
Click to expand...
Click to collapse
Oops. Totally forgot about UB can't use PCC haha.
Emma wont detect my device at all.
Flashtool 0.9.13 same problem persist, always shown connected in flashmode, even I doesnt connect my device
Might be a time to format my pc
Thank you guys :good:
ZervZ said:
Oops. Totally forgot about UB can't use PCC haha.
Emma wont detect my device at all.
Flashtool 0.9.13 same problem persist, always shown connected in flashmode, even I doesnt connect my device
Might be a time to format my pc
Thank you guys :good:
Click to expand...
Click to collapse
read in above post about bluestacks, genymotion or any other android emulator,
May be thats the reason why flashtool always showing connected in flashmode, even though u have not connected the device
check and remove everything using adb.
formatting pc is last option :good:
sourabhp said:
read in above post about bluestacks, genymotion or any other android emulator,
May be thats the reason why flashtool always showing connected in flashmode, even though u have not connected the device
check and remove everything using adb.
formatting pc is last option :good:
Click to expand...
Click to collapse
Too late bro. hahaha
As I said only program I aware of interfere with flashtool are pcc. and everytime I used flashtool, I never open pcc.
Anyway after format and intstalled flashtool+driver. now its working normally.
Thank you for helping me to enjoy my lollipop :highfive:
ZervZ, I'm glad that you've solved your issue.
enjoy Lollipop

Updated: Bricked after flashing a wrong ROM

https://forum.xda-developers.com/xperia-sp/help/bricked-flashing-wrong-rom-t3576684
In short, I got my xperia sp bricked after flashing a c5302 rom on a c5303 device
http://sony.yt/topic/7322-english-tu...eria-sp-c5303/
The method in this link states that phone may be detected as "qhusb_dload device", but what I detect is "Qualcomm HS-USB QDLoader 9008" in device manager
Then I followed the same steps to use S1tool, seems the tool fails to detect my device and I stopped here
but in "device and printers" in control panel, there is a grey qhusb_dload device icon!! so it means there is a short instant my device is detected as "qhusb_dload device"?
I have tried attaching the cable again and again, my phone has never been detected as qhusb_dload device again
Any idea for my situation? Thanks for any possible explanations to my case
Brah just flash firmware using flash tool thats it. Thanks appreciated
I got the same problem with an xperia sp.
I used the method from the tutorial and it worked. Have you installed the usb drivers from the archive ?
If you're using linux, you can try this tool that needs no drivers: https://github.com/eti1/spflasher
Flash doomlord's kernel using flash tool and boot into cwm and wipe system,cache,dalvik,data(optional) and flash ROM gapps and magisk.

Categories

Resources