Updated: Bricked after flashing a wrong ROM - Xperia SP Q&A, Help & Troubleshooting

https://forum.xda-developers.com/xperia-sp/help/bricked-flashing-wrong-rom-t3576684
In short, I got my xperia sp bricked after flashing a c5302 rom on a c5303 device
http://sony.yt/topic/7322-english-tu...eria-sp-c5303/
The method in this link states that phone may be detected as "qhusb_dload device", but what I detect is "Qualcomm HS-USB QDLoader 9008" in device manager
Then I followed the same steps to use S1tool, seems the tool fails to detect my device and I stopped here
but in "device and printers" in control panel, there is a grey qhusb_dload device icon!! so it means there is a short instant my device is detected as "qhusb_dload device"?
I have tried attaching the cable again and again, my phone has never been detected as qhusb_dload device again
Any idea for my situation? Thanks for any possible explanations to my case

Brah just flash firmware using flash tool thats it. Thanks appreciated

I got the same problem with an xperia sp.
I used the method from the tutorial and it worked. Have you installed the usb drivers from the archive ?
If you're using linux, you can try this tool that needs no drivers: https://github.com/eti1/spflasher

Flash doomlord's kernel using flash tool and boot into cwm and wipe system,cache,dalvik,data(optional) and flash ROM gapps and magisk.

Related

XPERIA - Z, FLASH MODE detects - QHSUSB_DLOAD, Unable to Flash

Hi XP- Z users/Developers
I am using wonderful Flashtool latest version and install the drivers for the same.
My XPERIA-Z is C6603 US version with locked Bootloader.
To go in Flash mode using Volume DN + Cable to PC, my WIN7 detects the XP-Z as QHSUSB_DLOAD, and Flashtool doesnt detect it as flashmode.
After researching for hours I learned GordonGate Flash Drivers would instantiate the FlashMode USB composition, but I am not sure which driver to load.
If I try mannually pointing the driver to QHSUSB_DLOAD with Gordon-gate Drivers it gives following ceritified drivers,
a) Generic FLash Device
b) SEMC AB900 Device
c) SEMC Flash Device
d) SEMC ETS/DFU etc etc device
I tried all but none of them worked, hence its stucked at QHSUSB_DLOAD Qualcomm Mode driver and FLash tool doesnt work.
Any Help would be appreciated.
Android 4.1.1 and kernel 3.4
Thanks
Download sony service update it has all the drivers needed.
Sent from my C6603 using xda premium
Thanks, can someone send the link?
I tried service update, its still not able to detect the QHSUSB_DLOAD Driver to ccorressponding SONY drivers, can someone post which is the driver SONY use for the flash mode, what its instantiated as? Currently its showing standard Qualcomm D Loader i.e used for OEM for flahmode, hence we need the right equivalent VID and PID which Sony uses for Qualcomm D Loader api for APQ-8064 Chip
Any update ???? i run into exactly same problem with my Xperia V (LT25i)..... help will be appreciated.
Maybe try another pc?Windows7
Sent from my C6603 using xda premium
I am also looking for the right driver, why isn't win7 detecting it, which should i force onto the unknow device? All i tried so far didnt work.

[Q] Xperia T stuck at device encryption failed

Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
flash a latest version of JB,
or better yet, install PCCompanion (Just google it) and repair your phone that way
sikander3786 said:
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
Click to expand...
Click to collapse
did you try Phone Repair option in PC Companion?
Thanks for your replies.
I have also tried LT30p_9.1.A.1.140_CE_Skyfall.ftf but same result. I have also tried different versions of flashtool.
PC Companion can't detect my phone. I have tried 2 different computers and each one is stuck on install MTP drivers. I guess unless the drivers are installed, PC companion won't detect it.
I have also tried connecting the phone in flash mode but PC companion asks to restart the phone in normal mode.
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
gregbradley said:
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
Click to expand...
Click to collapse
PC companion still can't detect the phone. I have installed/re-installed all the drivers you mentioned.
As Flashtool isn't able to flash the .ftf firmware to the phone, is there any other firmware available that can be flashed via fastboot?
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
gregbradley said:
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
Click to expand...
Click to collapse
Thanks for your suggestion.
Seems like EMMA only works with unlocked bootloaders. And my Xperia T can't be unlocked as USB debugging is off and there is no way I can turn it back on.
Further help needed, please.

Emma issues

Hey chaps,
I'm having a spot of trouble with Emma, I'm afraid.
I've followed the bootloader unlocking steps, the fastboot driver is where it ought to be.
My machine is displaying the phone when in flash mode as "SOMC Flash Device". Can't uninstall the drivers, can't update them with the fastboot driver as it's shown.
As a result, (assuming I haven't missed things or mixed it all up like a twat) Emma isn't identifying my phone. I'm connecting it in flash mode of course, I'm getting nothing.
Any ideas what could be the trouble?
what are you trying to do?
meaniez said:
what are you trying to do?
Click to expand...
Click to collapse
Flash a sony build
why are you using emma and not the Flashtool ?
Tried that too, connected in flash mode and keep getting errors.
At this point I'm thinking it's a driver issue, but for the life of me I can't fix it.
Really unsure where to go from here.
just some thoughts
1. try to download and install ADB driver if you haven't already.
2. try connecting the phone to a different usb port [sounds incredibly stupid, but it does work sometimes].
3. [assuming you're using windows] while the phone is connected, go to the device manager, look for phone [presumably under android device or sony] and uninstall the driver.
what kind of errors are you getting using the flashtool?
meaniez said:
just some thoughts
1. try to download and install ADB driver if you haven't already.
2. try connecting the phone to a different usb port [sounds incredibly stupid, but it does work sometimes].
3. [assuming you're using windows] while the phone is connected, go to the device manager, look for phone [presumably under android device or sony] and uninstall the driver.
what kind of errors are you getting using the flashtool?
Click to expand...
Click to collapse
3. Yeah I've done that. When it's connected in flash mode, it's detected as S1 Service (SOMC Flash Device). I'm fairly sure that's where the trouble lays, but everytime I try to uninstall the drivers to prepare installing the "correct" ones, the system hangs and I'm forced to hard reset.
Literally just says:
INFO - Checking header
INFO - Ending flash session
ERROR -
ERROR - Error flashing. Aborted
INFO - Device connected in flash mode
The drivers are there in the flashtool folder. Install the flashmode and fastboot mode drivers from there and then try connecting your phone into flashmode as a trial. If you see it connects, then proceed to flash the firmware
Sent from my D5833 using XDA Free mobile app
Could you please tell which sony build you are trying to flash?
I think you are flashing a wrong rom..
Alright I'm fairly convinced I'm just a dumbass. I haven't switched roms on a phone since my S3.
So far all I've done is unlock the bootloader, following the instructions from the sony dev video.
I've got a D5833, running 23.0.1.A.1.49 build. Doesn't seem to be any further updates OTA or through PC companion.
Flashtool and drivers are installed. ADB as well.
I haven't got CWM or anything running on it thus far, and I'm suspecting that that might be the problem.
Help a newbie, save the rainforest. <3

Need Help Flashtool? my device?

I don't even know how to start...
Just say, I want to try a lollipop on zr c5502.
and downloaded a fw from Xperifirm (and converted to ftf) and this tread http://forum.xda-developers.com/xperia-zr/general/stock-lollipop-android-5-0-2-build-10-6-t3114391
No error both while downloading.
But, I cant install either via flashtool
Firstly, my device wont get in flashmode green led only flash less than a second before gone. But flashtool said its connected, surely I cant flash anything.
I try fastboot blue led stay there, but flashtool dont show my device was connect in fastboot mode.
Then flashtool always show Device connected in flash mode. and I don't even connect my device to pc.
I've tried reinstall flashtool
change my usb cable and port
remove sd card from my phone
remove other usb component but mouse and keyboard
reinstall all flashtool driver.
Still problem
More data I can provide.
- Flashtool 0.9.18.5
- Xperifirm 4.5.3
- Windows 8.1 x64
- My device still working no bootloop, brick or anything wrong no button stuck or something like that
- Already bootloader unlocked
- My pc too
here a log from flashtool, while I doesn't connect my phone to my pc
23/014/2015 00:14:03 - INFO - Flashtool Version 0.9.18.5 built on 14-02-2015 15:30:00
23/014/2015 00:14:03 - INFO - Executing search strategies to find proxy selector
23/014/2015 00:14:03 - INFO - No proxy found for IE. Trying next one
23/014/2015 00:14:03 - INFO - Strategy firefox failed trying next one : No Firefox installation found
23/014/2015 00:14:03 - INFO - No proxy found for java. Trying next one
23/014/2015 00:14:32 - INFO - Syncing devices from github
23/014/2015 00:14:32 - INFO - Scanning devices folder for changes.
23/014/2015 00:14:37 - INFO - Pulling changes from github.
23/014/2015 00:14:41 - INFO - Devices sync finished.
23/014/2015 00:14:46 - INFO - Device connected in flash mode
can anyone help? thank you
Hi ZervZ,
First off, are you sure you have the proper usb drivers installed ?
also make sure to end any running adb connections by other software, ie: if you have bluestacks, genymotion or any other android emulator, make sure to close it completely and end the adb process using task manager (just to avoid any conflicts)
third, how do you boot in fastboot mode ?
it should be : completely turn off your device, connect the usb cable to the PC usb port (not the mobile yet), now press and keep holding the volume down key, while holding the volume down connect the micro usb to the device and continue holding the volume down key.
If this wasn't what you were doing, try it out and let me know what happend.
I'm surely a usb driver are properly installed. Every device but my phone work properly.
For flashtool drivers. Firstly, I've try installed only my device and flashmode+fastboot drivers = not working
then installed all driver that driver pack delivered = not working too. (both install with driver signing off, all green)
I'm not using or even installed any android emulator on my pc. only one program that I aware of conflict with flashtool is sony pc companion, which I'm not open it at all.
how I get in fastboot, same method as you provide but I used vol up, vol down for flashmode .(neither working with flashtool, even I've a blue led on, they still shown Ive connected in flashmode)
Now I'm try to uninstall a semc flash device driver and s1 service.
I think its a source of my problem, but problem is I can't. haha.
Might be need reinstall my windows
Edit: After I've restore my windows to the point before Ive install any drivers. Problem still persist, now its get worst, because pcc shown Ive connected sony device all the time .(same with flashtool.)
ZervZ said:
I'm surely a usb driver are properly installed. Every device but my phone work properly.
For flashtool drivers. Firstly, I've try installed only my device and flashmode+fastboot drivers = not working
then installed all driver that driver pack delivered = not working too. (both install with driver signing off, all green)
I'm not using or even installed any android emulator on my pc. only one program that I aware of conflict with flashtool is sony pc companion, which I'm not open it at all.
how I get in fastboot, same method as you provide but I used vol up, vol down for flashmode .(neither working with flashtool, even I've a blue led on, they still shown Ive connected in flashmode)
Now I'm try to uninstall a semc flash device driver and s1 service.
I think its a source of my problem, but problem is I can't. haha.
Might be need reinstall my windows
Edit: After I've restore my windows to the point before Ive install any drivers. Problem still persist, now its get worst, because pcc shown Ive connected sony device all the time .(same with flashtool.)
Click to expand...
Click to collapse
have you installed the drivers for ZR itself? when u installed Flashmode and fastboot drivers, u must have missed to tick the drivers for Lagan, Fusion3 board which are for ZR. reinstall all 3 I mentioned above and see if it works,
Also what version of flashtool are ou using? I am using 9.13 for my ZR which is recommended by the dev for first Z series phones. u may want to consider that as well
sourabhp said:
have you installed the drivers for ZR itself? when u installed Flashmode and fastboot drivers, u must have missed to tick the drivers for Lagan, Fusion3 board which are for ZR. reinstall all 3 I mentioned above and see if it works,
Also what version of flashtool are ou using? I am using 9.13 for my ZR which is recommended by the dev for first Z series phones. u may want to consider that as well
Click to expand...
Click to collapse
Well, yes I installed Lagan board on my my 1st try. Its wasn't work.
Then I just installed all of them, still wont work. Or even no driver installed from driver package. (only flashtool and connect my phone) that wont work too.
Same problem, but it can connected on 1st try, if I try to flash anything they will error and stay connected in flashmode again (Until I uninstalled a driver & reboot my pc)
As I said, flashtool 0.9.18 since its a latest version, might try 0.9.13 :good:
And.. I cant repair my phone via pcc too. Since they need to get in flashmode :crying:
have u tried http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/ ?
Bootloader is unlocked so you can not repair using PCC
sourabhp said:
have u tried http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/ ?
Bootloader is unlocked so you can not repair using PCC
Click to expand...
Click to collapse
Oops. Totally forgot about UB can't use PCC haha.
Emma wont detect my device at all.
Flashtool 0.9.13 same problem persist, always shown connected in flashmode, even I doesnt connect my device
Might be a time to format my pc
Thank you guys :good:
ZervZ said:
Oops. Totally forgot about UB can't use PCC haha.
Emma wont detect my device at all.
Flashtool 0.9.13 same problem persist, always shown connected in flashmode, even I doesnt connect my device
Might be a time to format my pc
Thank you guys :good:
Click to expand...
Click to collapse
read in above post about bluestacks, genymotion or any other android emulator,
May be thats the reason why flashtool always showing connected in flashmode, even though u have not connected the device
check and remove everything using adb.
formatting pc is last option :good:
sourabhp said:
read in above post about bluestacks, genymotion or any other android emulator,
May be thats the reason why flashtool always showing connected in flashmode, even though u have not connected the device
check and remove everything using adb.
formatting pc is last option :good:
Click to expand...
Click to collapse
Too late bro. hahaha
As I said only program I aware of interfere with flashtool are pcc. and everytime I used flashtool, I never open pcc.
Anyway after format and intstalled flashtool+driver. now its working normally.
Thank you for helping me to enjoy my lollipop :highfive:
ZervZ, I'm glad that you've solved your issue.
enjoy Lollipop

Can't flash preloader with SP Flash

I'm trying to unbrick a Lenovo K3 Note. Mediatek USB appears in device manager on Windows PC, but SP flash can't see the phone to flash preloader. The drivers are OK, because I have already flashed similar phones on the same PC.
I have also tried on the Linux PC. which I regularly use for flashing.
Any ideas?
Thanks.

Categories

Resources