Hi! My hd7 stopped working today! i restart it several time but still nothing! If i put the volume to max the speakers turn on but it's very very loud! And if i put the volume 29/30 and below the speaker dies!!!! Plz help!i'm using deepshining rom v8.1!
Easy!
If it's compatible with WP Backup, make a backup, then reflash the rom, also if still failing, use Dynamics 2.0... if then it still fails, buy a new one:crying:
I think it's a registry error! If i backup my phone won't the registry gets backup???
It's lot easier to fix the registry if someone can help cz i don't know how! If not i'll flash the roms you just said!
So can you help me with the registry ( where to enter what to fix.....)???
And olus! The camera just gone pink!!!!!! It doesn't even shoot!!!!! And i put my earphones on! The same problem! I can hear music only if it's 30/30!!! Wtf is happening!!!!!!!!!!!!!!!!!!
Related
Hello guys, let's make it short... suddenly the display of my Diamond become black and there's nothing I can do to make it on again... I tried everything: reset, remove battery... nothing! :-(
The telephone works, in fact I can receive calls and so... and it even connects through activesync. So it's a display problem for sure! :-((
Now my BIG question: I have to put it back H3G ITA original ROM (first step), that I've found on an italian forum and the original SPL that I've found here (second step), to bring the Diamond to repair.
For the ROM no probs I suppose... I'll go thru Activesync and flash it as usual, but THEN??? I won't be able to use activesync again to flash the spl, since I won't be able to set the initial configuration! :-(
Can you help me? Some ideas??? Thanks in advance!
mmm... what if someone tells me the right steps after a flash upgrade and i try to touch the screen at my best for the initial configuration???
then i could connect to activesync again maybe....
pleaaaaaaaaaaaaaaaseeeee...... give me some ideas!!! :-(((
What a shame...
i was hoping someone has an nice answer
i have exactly the same problem since yesterday - so dont worry you are not alone
you dont need to use activesync to flash
enter bootloader mode and you can connect via USB
I upgraded to WM6.5 and after flashing everything seems fine but I noticed the sound is not working when I play music and if calls comes in I cant hear it ring.
Please help me what should I do? I really need your help.
Radio.....................
please what shoul I do, which of the ROM do I need to use to resolve the problem.
thanks.
You need to look in the ROM thread for recommended Radio or other users of ROM Radio, then go to Radio STICKY download the Radio & Flash it...
And maybe even search for your problem.
So i flashed my tilt to HardSPL3.29 then ran the procedure to unlock it. So when i insert my SIM card i can make calls but no one can here me. I have read everywhere and cant seem to find the issue. I have tried different radios and OS roms. I did make sure they were compatible. Is there something i am missing? OR did i just make my phone useless?
Thanks for all the great information on here. I could not believe i made it this far. Any help is very much appreciated.
Hard SPL isn't going to touch the microphone, and if you didn't flash a new ROM then the radio should be fine.
Could be a hardware problem, unrelated to the flashing.
Can you record anything, using HTC recorder or notes?
No i cant record anything also.
Running the unlocker flashed the radio.
Flash a new radio and you'll be fine : http://forum.xda-developers.com/showthread.php?t=393182
Dave
I did flash a new radio and it still does not work. I am lost with all the different versions and release by different people. I even flashed it back to WM6.0 ATT Rom with the 1.27 radio and i still can make calls but no one can hear me. I am also running hardspl 3,56, When i try to flash a Radio i get a RSA error or something. I then have to flash a complete radio/rom image to the phone to get it to boot. Should i be running a different HardSPL?
hello
had the same problem
i changed the microphone all ok now
Is it easy to change the microphone? I have a similar problem, in that it's intermittent. On some calls people can here me, on other calls they can't. I've tried various radios, but not managed to cure it. It's come to the point where I can't trust my TyTN 2 anymore, and I'm now using an old Samsung phone.
hi
not very hard to change micro but hard to open the phone.
plz any one have link to buy microphone !!
So I was playing around with Android and a few ROMs and now the internal speaker (the one you use to talk with, I can hear music and use the speakerphone just fine) doesn't work.
Here's what I've tried doing (in order):
-soft reset
-hard reset on a ROM
-tried some other ROMs
-installed a stock ROM from HTC's website
Oh, and I have Hard-SPL unsigned 1.93. Should I try restoring the stock SPL as well?
Also, I made a backup of my original ROM using pof's steps, but don't really know what to do with them:
pof said:
Dump the ROM:
etc...
Click to expand...
Click to collapse
So it was working fine yesterday, and I really don't want to service...
Thanks for any help out there.
~codeslicer
[email protected],
i've got EXACTLY the same problem and tried the same things... i thought the speaker is broken, so i replaced it with a new one. (my waranty, guarantee, whatever it called in english ) is over, so i did it myself) But it didn't solve the problem...
man! i'm realy p!ss3d...
any hint/idea... ?
same here
HI
I have the same problem. did you find any solution, or anybody???
Thanks
I have the same problem!!
Sound goes off after 1 minute from starting, without my activity, tried to load old rom, hard-reset, soft-reset, speaker dismount, but without solution...............
You have solved?
ciao
TheJackall
Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?