I upgraded to WM6.5 and after flashing everything seems fine but I noticed the sound is not working when I play music and if calls comes in I cant hear it ring.
Please help me what should I do? I really need your help.
Radio.....................
please what shoul I do, which of the ROM do I need to use to resolve the problem.
thanks.
You need to look in the ROM thread for recommended Radio or other users of ROM Radio, then go to Radio STICKY download the Radio & Flash it...
And maybe even search for your problem.
Related
after i flashed the cingular rom with the new radio i cannot hear any sound on my tilt.. can someone please help me?
flash your original ROM back. Then, start reading about this issue.
i flashed the rom i had before and still the same problem.. do you know where i can find the att shipped rom? or other methods in fixing this problem.
first things first:
set up your signature like mine so it displays your rom version/radio version/type of device. You can get this information in start->settings->system tab->about and start->settings->system tab->device information. Next, choose your carrier so it displays in the upper right as mine does. This information helps us to help you.
because of wrong radio rom flashed.
baltajr88 said:
after i flashed the cingular rom with the new radio i cannot hear any sound on my tilt.. can someone please help me?
Click to expand...
Click to collapse
I had the same problem.
Flash just a radio you can find it from ftp://xda:[email protected]/Uploads/Kaiser/Radio/KAIS_Radio_Only_1.27.12.17_CustomRUU.rar
or
flash original ATT Rom from ftp://xda:[email protected]_radio_sign_22.45.88.07_1.27.14.09_Ship.rar.
Hello people,
i just finished installing Radio_1.13.25.24 on the Blackstone, but again FM radio is not working...
i get into the application normally, connect the headphones, but no sound at all.
what could the problem be ??
do i need to install anything else, except Radio_1.13.25.24.nbh ?
well the radio 1.13 isn't actually the radio application. This is to do with the phone signal among other things. If the radio ap is not working look at a hard reset to try and fix this.
Also if you just play an MP3 and use the headphones does this work? and when your headphones are plugged in check the volume as there are 2 different settings for volume, 1 with headphones and 1 without
damn, how could i be so stupid ??
thanks for the help mate !
dont worry about it. I wondered what the radio was for when i got my first phone.
sekibun said:
Hello people,
i just finished installing Radio_1.13.25.24 on the Blackstone, but again FM radio is not working...
i get into the application normally, connect the headphones, but no sound at all.
what could the problem be ??
do i need to install anything else, except Radio_1.13.25.24.nbh ?
Click to expand...
Click to collapse
install the rilphone cab corresponding to the 1.13 radio..
sooo, what does the radio thing do ??
manages anything about communications on the phone ??
sekibun said:
sooo, what does the radio thing do ??
manages anything about communications on the phone ??
Click to expand...
Click to collapse
all comm includin bluetooth, wifi, radio, gprs etc r managed by the radio.
the radio is linked to the OS via a file called rilphone.dll
i didn't install this dll.
do i have to ?
also, when i flash a new rom, does the radio stay the way it was (like 1.13 in my case) or do i have to reflash the radio as well ?
hi forum. i have been looking around to solve this problem but i wasn't able to find a solution yet so i am asking here.
i had a tilt working great, i had an accident and the phone is destroyed so i get another one.
it is the same phone but it just don't have the camera, this one came with a new version of windows mobile(6.1).
i am now having this issue, when i get an incoming call and i answer i can't hear anything from the other side and the other side can't hear me either.
after that, the phone gets totally muted, it don't make any more sound when sliding or whatever.
the only way to fix it is reboot the phone, that way i get sound again but after i get an incoming call the problem happens again.
the problem wasn't happening if i made the call but today i made a long call and after a while talking i got a constant buzz, the buzz only stopped after i turned off the phone.
any help will be apreciated as i am totally lost here.
thanks.
Have you tried flashing a different radio or a different ROM?
talking with my vendor it seems that he flashed the rom and maybe the porblem can be the radio.
i am reading here http://forum.xda-developers.com/showthread.php?t=393182 but i dont have idea wich radio should i download and either how to make the installation.
my device information is:
ROM version: 3.57.502.2 WWE
Rom date: 07/17/2008
Radio Version: 1.70.OliNex
Protocol Version: 25.65.30.04H
so maybe the radio is not compatible with the rom and that is why i am having issues with the sound ?
That is a possibility. The nice part about flashing radios is that they are completely independent from the ROM. When you flash a radio it won't flash or reset your device. Therefore, you can flash and test as many radios as you want without any real negative side-effects Just stick with the one that ends up working the best for you!
Digital Outcast, thank you for your help.
do you think you or someone can point me to a tutorial to flash the radio only ?
i am finding how to update the rom but not the radio only.
thank you again.
To flash the radio follow the same steps as flashing the ROM. You need only the radio (.nbh file) and the Kaiser Custom RUU. Just don't do a hard-reset or anything after it completes!
cool, i installed a new radio and it fixed that problem, i am checking other common features of the phone, for now everything seems to be fine.
thank you very much for your help
Problem with incoming call
I have exactly the same problem and the same versions of software and firmware. Which version of the radio firmware did you install? Where did you get it? This is my first use of a smart phone and don't know much at all about where to get this.
Thanks!!
gladone said:
I have exactly the same problem and the same versions of software and firmware. Which version of the radio firmware did you install? Where did you get it? This is my first use of a smart phone and don't know much at all about where to get this.
Thanks!!
Click to expand...
Click to collapse
Start by reading the stickies. Always best place to start. Or if you are lazy and wish to just jump to radios use this >link<. But I definitely recommend you read all the stickies before flashing a device for the first time. Just start with the newest radio and work backwards til you find a good one for your device.
I had someone update my at&t tilt, afterwords i can make or receive one call the the speaker makes a slight buzzing sound and i cant hear or talk to anyone on the phone, incoming or outgoing. all the other functions work like there supposed to.
Might be due to the wrong radio version for the ROM !
really need more info on ROM & radio versions to be sure.
Do a search on it & look into your current ROM version & your current radio version & use the Kaiser wiki to help you:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Re-flash the Radio using the steps found here: http://forum.xda-developers.com/showthread.php?t=433835
Radios can be found here: http://forum.xda-developers.com/showthread.php?t=393182
If after you're done the problem persist, post more details so we can help.
Good luck.
So i flashed my tilt to HardSPL3.29 then ran the procedure to unlock it. So when i insert my SIM card i can make calls but no one can here me. I have read everywhere and cant seem to find the issue. I have tried different radios and OS roms. I did make sure they were compatible. Is there something i am missing? OR did i just make my phone useless?
Thanks for all the great information on here. I could not believe i made it this far. Any help is very much appreciated.
Hard SPL isn't going to touch the microphone, and if you didn't flash a new ROM then the radio should be fine.
Could be a hardware problem, unrelated to the flashing.
Can you record anything, using HTC recorder or notes?
No i cant record anything also.
Running the unlocker flashed the radio.
Flash a new radio and you'll be fine : http://forum.xda-developers.com/showthread.php?t=393182
Dave
I did flash a new radio and it still does not work. I am lost with all the different versions and release by different people. I even flashed it back to WM6.0 ATT Rom with the 1.27 radio and i still can make calls but no one can hear me. I am also running hardspl 3,56, When i try to flash a Radio i get a RSA error or something. I then have to flash a complete radio/rom image to the phone to get it to boot. Should i be running a different HardSPL?
hello
had the same problem
i changed the microphone all ok now
Is it easy to change the microphone? I have a similar problem, in that it's intermittent. On some calls people can here me, on other calls they can't. I've tried various radios, but not managed to cure it. It's come to the point where I can't trust my TyTN 2 anymore, and I'm now using an old Samsung phone.
hi
not very hard to change micro but hard to open the phone.
plz any one have link to buy microphone !!