Database Develop

Overclocking notice?

Im sorry if this is in the wrong section, but when overclocking my phone I notice that it tends to stay in the highest clock possible. If I have it at 1.2 its at 1.2 for 90% of the time. How can one fix this problem? Is it a kernal or voltage control problem?
Sent from my SGH-I897 using XDA App
Sent from my SGH-I897 using XDA App

Try disabling the perflock. That will allow your device to read the frequencies. The only thing is you have to disable the perflock everytime u reboot. But it will enable your custom profiles. I had the.exact same problem.
But as always you can download a kernel with the perflock permanently disabled. But if u like your current kernel, just disable the perflock inside Setcpu
Sent from my Evo 4g in the Hood...

goob1284 said:
Im sorry if this is in the wrong section, but when overclocking my phone I notice that it tends to stay in the highest clock possible. If I have it at 1.2 its at 1.2 for 90% of the time. How can one fix this problem? Is it a kernal or voltage control problem?
Sent from my SGH-I897 using XDA App
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
What ROM and kernel are u using? If using a kernel like hardcore's speedmod, did u make sure u r flashing the Captivate version, and not the 9000 version.
DonSolo said:
Try disabling the perflock. That will allow your device to read the frequencies. The only thing is you have to disable the perflock everytime u reboot. But it will enable your custom profiles. I had the.exact same problem.
But as always you can download a kernel with the perflock permanently disabled. But if u like your current kernel, just disable the perflock inside Setcpu
Sent from my Evo 4g in the Hood...
Click to expand...
Click to collapse
Do captivates have this perflock? I never thought they did. The last I heard it was HTC phones that had this to be disabled. I have flashed quite some ROMs and kernels, and never had a necessity to even use SetCPU.
And to honest, I would recommend NOT to use set cpu on any captivate with 2.2 or higher rom/kernel. That tends to mess up the phone.

Im gonna be using phoenix 4.5 once it finishes downloading... but as of now, im on 4.1 and with setirons kernal1.5.6
Sent from my SGH-I897 using XDA App

[Q] Noobish - CPU doesnt want to be controlled

Hi. I'm new to here.
I have rooted my Gnote, and i dont know wether it is a full root or what.
For maximizing my battery, i underclocked my Gnote by setting max CPU freq to 800 MHz or 1 GHz using SetCPU.
But.. according to the CPU history using No-Frills app, it written there it is still clocked to 1400 Mhz and 1200 MHz sometimes.
Is this a rom problem? Or kernel ?
Btw i'm using stock and SpeedMod k3-3 kernel.
Sent from my GT-S5830 using Tapatalk 2

sometimes setcpu seems to not wanna start after a reboot so I really recommend you start the app and see everything is well in the app and see from there that your cpu frequency does not exceed the selected value. Otherwise I recommend using voltage control. I'm using it on speed mod and all is good for me.
Cheers.

xranekx said:
sometimes setcpu seems to not wanna start after a reboot so I really recommend you start the app and see everything is well in the app and see from there that your cpu frequency does not exceed the selected value. Otherwise I recommend using voltage control. I'm using it on speed mod and all is good for me.
Cheers.
Click to expand...
Click to collapse
yeah. sometimes the setcpu app says that it has been denied superuser permissions.. but dunno why :| any ways to solve this ?
in my Galaxy Ace (GT-S5830) setcpu and others run OK :|
btw hitted thanks +1

kevintangi said:
yeah. sometimes the setcpu app says that it has been denied superuser permissions.. but dunno why :| any ways to solve this ?
in my Galaxy Ace (GT-S5830) setcpu and others run OK :|
btw hitted thanks +1
Click to expand...
Click to collapse
Open super user and double check that its been granted permission. If so open your file manager and make sure you can access the data folder in root and set rw priveledges, make sure you have full root.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Open super user and double check that its been granted permission. If so open your file manager and make sure you can access the data folder in root and set rw priveledges, make sure you have full root.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I hv set my superuser to always allow.. and about the full root.. i havent know it yet..
Sent from my GT-P6200 using Tapatalk 2

Seems that i figured out why.
Does stock ICS support init.d ? If it doesnt, how can i make it support ?
Sent from my GT-S5830 using Tapatalk 2

AOKP with ICZen won't hold CPU values

Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app

svavrek said:
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Look at the int.d files they may be over writing your settings at boot.
Vibrant 360° Productions

It would be more beneficial if you posted ICZ bugs in the forum where I actually host the rom, we have a ton of great minds over there that are more than willing to help.
That being said, what are you using to set the CPU values? If using the AOKP controls, yeah, they won't hold. Use NSTools, free from the market, and your values should stick.

svavrek said:
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
you just got lucky J and B posted before me.. I would've ran you over for posting a question in the Dev Section.
Questions, where do they go? the Questions section *gasp*

help with [Kernel][03 Nov]Redux Kernel 0.8[Sense3.6 & 4]

hi all...i need ur help....after i have flashed Team Venom ViperVIVO 1.1.0 rom into my phone using cwm everything is fine...but i need to overlock my phone so that it can run faster so i have decided to flash redux kernal 0.8 directly into the phone using cwm...but after i have rebooted i dont know where to adjust the overclock speed...it is just like i have done nothing to my phone after i have flashed the redux kernal inside...anyone can help me out? thanks a lot

Download Trickster Mod app from play Store.

Using your favorite cpu tuner (mines setcpu but you can use something like antutu just search play store for cpu) set max to 1600 and min to 360 than put a screen off profile at 360 and 240 (values are approximate). Once done DO NOT check "set on boot" as incompatible setting can put you in a boot loop.
Link to antutu cpu master (free)
https://play.google.com/store/apps/details?id=com.antutu.CpuMasterFree
Sent from my Incredible S using xda premium

but everytime when i reboot the setting keeps on revert to stock...any idea? thanks a lot =D

jasonyoong1 said:
but everytime when i reboot the setting keeps on revert to stock...any idea? thanks a lot =D
Click to expand...
Click to collapse
Using trickster?
Sent from my Nexus 7 using the xda app

both antutu and trickster....i put 61 and 1490 but after reboot it gives me back to 245 and 1024

jasonyoong1 said:
both antutu and trickster....i put 61 and 1490 but after reboot it gives me back to 245 and 1024
Click to expand...
Click to collapse
Did you press menu and set on boot?

for antutu u nv put coz i scared bootloop as the person mention above...but i dono where is the setting for set on boot for trickster

Press menu within the app and the first option is set on boot.

Forgot to mention if your on a post gingerbread rom, you can set on boot however being on gb and running cm7 I opt out, rarely seems to be a problem as my phone is almost never powered off.
Sent from my Incredible S using xda premium

Trickster mod help

I really need to use that app since thats the only app that can allow me to change my cpu MAX frequency. I asked trickster dev and they said the reason i cant use it is because i dont have a file name MKSH at /system/bin/. I tried dmod and benz rom but no luck. Can anyone who succesfully been able to use this app tell me what rom is that??
Sent from my GT-I8190 using xda app-developers app