I am having some problems transfering data from my old HTC Desire Z (flashed to CM9) and my new HTC One (M7).
I follow the instructions, the One creates a Wifi AP; I have installed the HTC Tool on DesireZ device and that app locates and connects autoamtically to One's AP and the proper PIN is visile on both devices. Now, comes the problem, no matter what I choose to transfer, it just jams.
The DesireZ shows a message "Pushing data to your new HTC" and both devices show a spinning circle, however there is no progres of any kid, eventually after a few minutes both phones show a sign (red exclamation mark inside red triangle), however no error is given and the process still seems to be running.
Any idea what this is all about and how to fix it?
Related
I upgraded my XDA 2s to WM5 and patched all the problems and got them worked i:e:Camera,Album,blue tooth,backlight, Buttons,MMS, andVideo.
1) But I can not Sync through craddle just does not find the device, but can easliy Sync through blue tooth and infra red.
2) WiFi easily finds the network and shows connected and shows the signal strength as well, but once I open the explorer type the addrtess press go after a moment an error message shows up saying Page can not be found. I tried so much to find the solution but in vain I must have reloaded the upgrade more than 50 times but failed every time to fix it.
Can any one up there could help please.
Retrieve files from internal storage if device will not pass the AT&T network splashs
Title: Retrieve files from internal storage if device will not pass the AT&T network splashscreen
I have an AT&T Tilt. It will currently not pass the AT&T network splash screen upon power-on. It will not pass this screen even if the SIM card and/or the microSD card is removed. This condition has befallen my device previously and has something to do with buggy software which I must use. The remedy for this problem in the past has been to hard-reset the device, reinstall my software (or install a backup), and continue life until the next failure.
However, this time I have the misfortune to have files in the internal storage of the device that I would not like to lose. I am therefore seeking ways to retrieve these files before I hard-reset my device.
I am aware of the “bootloader” screen and how to reach it, but do not understand how to employ it to meet my ends. I have obtained “mtty” (mtty_0513_Test.exe) and “qmat” (qmat_435.zip), but do not understand how these tools may be of use.
My device states the following versions at the network splashscreen:
R 1.27.12.11
G 22.45.88.07H
D 1.57.00.00
My device provides the following information at the tri-colored bootloader screen (red over green over blue):
KAIS1*0
SPL-1.56.0000
CPLD-8
In the white area below the tri-colored boot loader screen the text “USB” appears when connected via USB to my Windows Vista Ultimate (Service Pack 1) 32-bit machine and “Serial” displays when the mobile is disconnected from the computer.
The computer searched for drivers for “Qualcomm CDMA Technologies MSM” when the mobile was connected in bootloader mode, found drivers, and reported that “Microsoft USB Sync” was successfully installed. This is reflected in the Windows Device Manager.
I therefore seek a means of retrieving files (or binary dumps that can be resolved to files by post-process) from my device. I have at my disposal only my computer, a low-bandwidth internet connection, a USB microSD reader, my mobile, my mobile’s SIM and microSD cards, and a USB cable suitable for connecting my mobile to my computer.
I certainly understand the importance of regular backups and I observe this practice to the best of my ability. I appreciate any insight this community may have for resolving my issue. This community has been an invaluable resource to me in the past and provides a wealth of both raw information and well-maintained solutions.
I don't pretend to be an expert, but off the top of my head, (my experience is with XP, not Vista) have you tried connecting, and browsing the device from My Computer? I've retrieved files from my PDA and my Excalibur when the screen broke using this method. I didn't try this with SMS files, however. Not sure on that, or even if your device will boot up enough to be browsed, but it's a thought.
Device not available through "My Computer"
Barkleyfan, thank you for your notion. I am unable to browse the device in that conventional way, for my device will no longer appear in the storage list provided by "Computer" (Vista did away with the "My"). Furthermore, the mobile will no longer appear in "Device Manager" of the Windows Control Panel when attached by USB and powered-on with no special keypresses (leaving the device to hang at the AT&T logo splashscreen with version information displaying). However, if the device is attached by USB and powered-on while holding down the camera key, a special red, green, blue, and white screen will appear. In this mode, my device will appear in "Device Manager" as "Microsoft USB Sync". Sadly, this does not make the storage appear in "Computer".
That is, my device does not seem to boot up enough to be browsed, so to say (at least by conventional means).
I have used software to dump the memory contents of USB-connected embedded systems and other software to render Windows-readable files from those dumps. This software was used when the standard user interface portion of a device was destroyed or other severe issues plagued the device. I am therefore in search of a similar suite for the Tilt/Kaiser in particular or the MSM7200 in general. In short, I have exhausted my means of finding that for which I think I am looking, but I certainly remain open to other approaches.
Cheers, sinnombre.
I've exact same problem that is am unable to pass through the AT&T splash screen...
Hi Friend,
You've described the problem that I've faced just 2 days back... I didn't take back up of my phone and since now I am unable to pass the at&t splash screen, I am not able to do anything!
By any chance, did you manage to retrieve the content of the phone memory i.e. contacts or any other file? please please please help me get over with it if you find any solution...
I've been using this at&t tilt for almost 3 years and all my contacts and other details are stored in it. I understand i did a very childish thing by not backing up even once but its too late to talk about it now!
Please help me if there is any way I can repair it or get the content by any means.
Your reply or any solution or suggestion is by heart and highly appreciated.
Thanks so much in advance.
Hi Guys, I have a similar issue now. Can you tell me if I could somehow get my contacts information. I have a lot of contacts on the phone ... A solution to this would really appriciated. Thank you.
I know this question is noob, but please forgive me guys, I've just got my phone this afternoon.
I have done a search on this box and on the web but not found any solution. Could you guys please help me to connect my HTC Dream to my computer? I have install HTC Sync 2.04, but it doesn't recognize my phone when I plug it in. And, by the way, can I connect to internet through my computer, like the way I did it with my O2 Atom Life through Active Sync?
Thanks so much.
I have download HTC Sync and follow the instructions found on the website, but I didn't see any notification shown that my phone has connected to the computer. So what do I do now?
Plug in your USB cable to the pc and the phone. After a second, go to the phone and slide down the notification shade (the top bar) you should see a thing that says USB connected. Tap that. Then a box will pop up and ask you to mount your phone. Tap mount and your pc will register it as a removable disk.
When you are finished, go back to your phone and slide the shade back down, tap the USB connected thing again, then click unmount before unplugging the cable from the phone. This will save the sd card from becoming corrupted.
That should be the way to read the MiniSD card from computer shouldn't it? I have done that and I still find that I can't make HTC sync work actually. The issue is, can my phone connect to internet through my computer?
The Dream is a Google experience phone. The firmware is built from the Google source code and nothing more. HTC Sync requires an app to be installed on the phone which I believe is wrapped up in the HTC framework. Our google phones don't have those frameworks by default so, we can't 'push' it back in.
It's included on the HTC Branded phones (Magic and Hero) so ROMs ported from those devices do have it included and of course the required frameworks. Thing is, hardly anyone uses HTC Sync, so the ROM devs remove them to make 99% of us happy. Sorry, but the Dream was never intended to use HTC Sync. If you're desperate, flash Haykuro's 6.0 ROM.
So does it mean that my phone will not be able to connect to internet through my computer, or is there another way round? I prefer connect this way, since wifi is not always available in my place...
Hey guys, I have a problem here,
After installing Leng Arabic on my HTC Diamond phone the phone reset itself, I got a message saying Caching arabic then the phone reset itself again all the way to show me the HTC Logo followed by a black screen that only shows the signal power, unfortunalty i have a key lock on my phone so i am unable to connect it to the PC using activesync and I get the following message " You have failed to unlock your device. To connect or synchronize with this PC, please disconnect your device and try again." as The screen is just black I am unable to unlock the phone.
Can you please advise if there is any way to get access the contacts before doing a hard reset? I managed to access the bootlaoder screen using the volume down and the rest button and I get HTC USB sync in my device manager but i am unable to get anywhere inside the phone from there?
Many thanks in advace
I take it you cannot connect to activesynch from the bootloader? I dont really know what you mean by 'keylock', but ive messed up a few htc phones bit as long as i can get to the bootlader ive been fine. I think sprite allows you to make a backup from windows as well as your phone. Maybe try running that from the bootloader. I dont have my phone with me (!!!!) but i think i have sprite 6.5.4
A 'demo' wink wink is easily found on the net.
I cannot get my new HTC Vivid (4 hours old) to sync with my PC. I downloaded and installed the latest HTC Sync file from this site. I opened the HTC Sync and got a screen that said no device was connected. I plugged the USB cord into the PC and into the Vivid. I responded to the screen by selecting the HTC Sync option. A screen displayed saying that the unit was synchronizing. While this was going on, the Vivid went to sleep. When I started it up again, the screen said the sync was disconnected. Since then, I have tried several times to make a connection and I always get a message on the Vvid that it cannot find HTC Sync on the PC even though it is running. If I cannot sync to my PC, the Vivid goes back to AT&T.
Works fine for me man. Reboot your comp. Often the driver won't take first round.
Sent from my HTC PH39100 using xda premium
I had tried rebooting once, but I did it again. Still got the message from the Vivd that it could not find HTC Sync. Then several minutes later, I looked at the screen and the HTC Sync program was sitting there waiting for me to enter my device name and configure the settings. I must have been closing the program too soon, assuming it was not working. Unfortunately, it does not appear to be able to sync my Outlook tasks or notes, only my calendar and contacts. And somehow, I have each contact twice. Oh, well. Thanks for your response.
Download HTC Sync
Try using the download link here: http://www.htc.com/www/help/
I had problems myself but after installing the universal version of sync, my computer automatically detected the Vidid. Of course a reboot was needed Good luck.