Hey i am currently using CM 10.1 Nightlies + Wolf v005 kernel.. Performance is really good I am getting 6000 in quadrant and about 15000 in AnTuTu, but its overheating really hard.. IT was overheating at stock aswell, but is there some way to stop it? Without losing performance??
Raxex said:
Hey i am currently using CM 10.1 Nightlies + Wolf v005 kernel.. Performance is really good I am getting 6000 in quadrant and about 15000 in AnTuTu, but its overheating really hard.. IT was overheating at stock aswell, but is there some way to stop it? Without losing performance??
Click to expand...
Click to collapse
the only way to reduce heat is to lower the voltage. but be careful what you do
Hello...i wanted to ask is there any kernel that is undervolted by default?
Sent from my LG-P880 using xda app-developers app
laufersteppenwolf said:
the only way to reduce heat is to lower the voltage. but be careful what you do
Click to expand...
Click to collapse
if nt kernel thn wht r the best undervolt settings fr the least possible heating??? pls help..
thanks in advance
milossimon said:
Hello...i wanted to ask is there any kernel that is undervolted by default?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
not that i would know of...
but i will play around with the voltages a bit
vidit_panchal said:
if nt kernel thn wht r the best undervolt settings fr the least possible heating??? pls help..
thanks in advance
Click to expand...
Click to collapse
well, it's simple the lower the voltage, the lower the heat
but go down in steps of 10-15mV, and test it after every lowering for stability!
Related
Hi everyone, is it fine to use overclock for a daily use?
Sent from my X8
If its at a stable measurement. If you put it at a ridiculously high measurement for daily use then your phone will start rebooting on its own. 710mhz recommended
I cant find for 710mhz on alfs kernel
Sent from my X8
mikey000 said:
Hi everyone, is it fine to use overclock for a daily use?
Sent from my X8
Click to expand...
Click to collapse
overcloking = more speed = require more energy and will drain your battery faster. That's the consequence.
I feel the good of oc only on gaming.. phone, sms, etc not much difference
I wouldn't over kill it and personally would use a rom with a higher clock rather than a slider app. Seems to be more stable to me.
Edit:
I had my 855 running a 1ghz rom flawlessly. Even got about 10 hours out of it. Before that I used setcpu to 1ghz od and thought my phone was going to melt
Sent from my DROIDX using xda premium
Thanks for the feedback guys now i have something to consider
Sent from my X8 using xda premium
joe200 said:
overcloking = more speed = require more energy and will drain your battery faster. That's the consequence.
I feel the good of oc only on gaming.. phone, sms, etc not much difference
Click to expand...
Click to collapse
Found the answer for gaming only thanks
Sent from my X8 using xda premium
i got freez on my phone every try i want to overclock it via setcpu,i currently using Grif CM rom,before overclock i flash the OC kernel named ketut,and then installed setCPU.First i was try to set max to 844mhz and min to 122mhz,if i goes up my phone starts to freez after few seconds...i was seen something on youtube that it could be run on 903 mhz even on 940mhz so what's the point?
and sry for the language....
What's the point ?
The point is that all CPUs are different like humans .
Like us people , some can withstand going faster while other cannot .
It's all down to how much the CPU can do
Herpderp Adreno + Tegra.
Yup. Listen to him.
Sent from my GT-S5830 using xda premium
point is u need to read a little bit more
You can try a rom based on stock instead of cm7 and try the cf-root OC kernel. Might be the same though.
Sent from my GT-S5830 using xda premium
Point is, buy a more powerfull phone with higher cpu....
pyronia said:
Point is, buy a more powerfull phone with higher cpu....
Click to expand...
Click to collapse
i have s2 now hehe
Going over 844 can cause damage to your CPU. I would recommend not doing so
Yes, people have taken it to 904 and then drained full battery in about half hour.
So, if you're so unhappy, buy a new phone
Kabir Saxena said:
Going over 844 can cause damage to your CPU. I would recommend not doing so
Yes, people have taken it to 904 and then drained full battery in about half hour.
So, if you're so unhappy, buy a new phone
Click to expand...
Click to collapse
Yes, i already bought samsung galaxy s2 its much much better!
Sent from my GT-I9100 running RR 3.1.3 using xda premium
hi there ...
since I'm using my p970 mainly as a wifi xbmc remote control, as a "fritz.box-phone" and sometimes some gps stuff only, I am searching for battery life as much as I can get.
I don't use mobile options cause I even don't have a sim card inserted. And I don't need performance or a snappy interface cause I just use barley a hand full of apps.
So I need ur advice which config is best for me. which kernel, gov ,launcher and Rom I should use.
Sent from my GT-I9300 using xda premium
get zeus v7
underclock your cpu, undervolt the cpu, change the screen brightness, use adw launcher or a lighter one, change the options of wifi in zeus tweaker allowing better battery consumption
How to undervolt cpu?
Hellmanor said:
How to undervolt cpu?
Click to expand...
Click to collapse
Zeus App/Tweaker
Ok, but if I use CM7?
Cm7 is known to suck quite a lot of juice.. better for you to switch to Zeus
I would, but I love sound in CM and switching songs with volume rockers
well a price for everything
battery life for music
is the sound really better on cm?
(i mean compared to power amp in stock roms)
does it sound louder and have a richer bass?
Yup. I tried everything (CiCi, Mercurified, Zeus, Nova), tried to apply fixes to switch music with volume rockers (it's sth necessary for me - i failed ) and cm is the best in my opinion.
It would be nice if I could change voltage...
So, use boype's cm7 and underclock and undervolt it
Sent from my LG-P970 using xda app-developers app
Just how to undervolt cm7?
Hellmanor said:
Just how to undervolt cm7?
Click to expand...
Click to collapse
Play Store - SetCPU
Theres no point in UV. Save battery to get more SoDs. Thats what CM7 is
Sent from my LG-P970 using Tapatalk 2
Hellmanor said:
Just how to undervolt cm7?
Click to expand...
Click to collapse
AFAIK does DVFS (feature of LG) already undervolt your CPU as far as possible, according to safe values of course. I think anything lower causes SoDs and other errors... You should take boype's kang, if you want to have CM7. I just made a test and got 1day 18 hours with normal use, so you can definitly get more out of it
Well I'm using boyope's cm7 and its sort of same as zeus v7 in battery life, just try boyope's then see for yourself since u want a cm rom
Sent from my LG-P970 using xda app-developers app
Please advise V7 and V6.31 of Zeus, which one have better battery life? Thanks.
V6.39n
Sent from my LG Optimus Black using Tapatalk 2
SoulExertz said:
V6.39n
Sent from my LG Optimus Black using Tapatalk 2
Click to expand...
Click to collapse
Then, I have to return to 6.39.he.he..., Thank you very much
Hey, all.
I am running the apocalypse ROM on my SGA.
While playing, i noticed that Jetpack Joyride lags a lot.
What will be the best CPU settings and governor for gaming?
Please let me know your opinion.
Also, I rarely over clock it beyond 844mhz, so is it a good idea to go beyond?
Thanks.
Peace out.
Kabir Saxena said:
Hey, all.
I am running the apocalypse ROM on my SGA.
While playing, i noticed that Jetpack Joyride lags a lot.
What will be the best CPU settings and governor for gaming?
Please let me know your opinion.
Also, I rarely over clock it beyond 844mhz, so is it a good idea to go beyond?
Thanks.
Peace out.
Click to expand...
Click to collapse
864 or even 883 is pretty stable for me
Maximum clock speeds vary with device..Impossible to give an exact figure or predict anything
I got transformed into a potato while writing this post..
limxyz said:
864 or even 883 is pretty stable for me
Click to expand...
Click to collapse
But doesn't that kill your battery?
Sent from my GT-S5830 using xda app-developers app
Prawesome said:
Maximum clock speeds vary with device..Impossible to give an exact figure or predict anything
I got transformed into a potato while writing this post..
Click to expand...
Click to collapse
I agree.
But I was just wondering which would be the best governor for gaming. Everyone may have different opinions.
Sent from my GT-S5830 using xda app-developers app
I have mine on 902mhz, always stable, very fast and very good for gaming, the best governor for gaming is either lagfree or performance.
Best of luck!
Sent from my GT-S5830 using xda premium
I've been wanting to OC that high, but I've been afraid of heat. You had any issues, notice it running hotter than normal?
Sent from my Galaxy Ace
GlaciaDDF said:
I have mine on 902mhz, always stable, very fast and very good for gaming, the best governor for gaming is either lagfree or performance.
Best of luck!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Thanks.
But are you site you have no over heating issues?
And what is the minimum CPU frequency you set?
Sent from my GT-S5830 using xda app-developers app
Reply
well if you scared of crashes, heat and battery drain you can set maximum to 864mhz, minimum to 245 mhz and set governors to performance will be very stable and faster. it depends on your device. i found my ace oc to 902mhz is not stable for me, it crashes often and very hot, drains the battery about 1% 6-7 mins.
Rush6 said:
well if you scared of crashes, heat and battery drain you can set maximum to 864mhz, minimum to 245 mhz and set governors to performance will be very stable and faster. it depends on your device. i found my ace oc to 902mhz is not stable for me, it crashes often and very hot, drains the battery about 1% 6-7 mins.
Click to expand...
Click to collapse
Thanks.
I'll try it out
Sent from my GT-S5830 using xda app-developers app
Hi, i got overheat(the problem is not the battery but cpu) on my sgs when installing apps! just when installing and not after, where is the problem? And what is the best governor/scheduler? Thanks
Gt-i9000
4.2.2
Baseband JVT
Cyancore 2.8.5
CyanAOSP 3.5.0
Did you OC it?
mrjraider said:
Did you OC it?
Click to expand...
Click to collapse
no bro
Used your phone while charging?
mrjraider said:
Used your phone while charging?
Click to expand...
Click to collapse
when charging the phone temperature is 35-40 when using 50-55
Hmm weird.. Check CPU Spy because if your CPU is running 100% constant it will generate heat.
mrjraider said:
Hmm weird.. Check CPU Spy because if your CPU is running 100% constant it will generate heat.
Click to expand...
Click to collapse
i'll post the result asap
Edit:
http://imgur.com/Rb6DtpQ
The stats are looking normal altho it keeps running pretty much on 1000mhz.
Could you lower the max freq a bit to see if it helps
mrjraider said:
The stats are looking normal altho it keeps running pretty much on 1000mhz.
Could you lower the max freq a bit to see if it helps
Click to expand...
Click to collapse
I'll thanks
Sent from my GT-I9000 using xda app-developers app
I had the same problem. But I flashed a new rom and it solved the problem. May be because of the rom as well
Sent from my GT-I9100 using xda premium