Database Develop

[Q] 1 more bricked N7000, help?

on stock recovery do wipe data. after this see only logo. When try flash with Odin any rom he freeze on ~80% "factory fs - write data". What i can try do? (sry for bad eng). i was try many instruction for unbrick and nothing work..

WarFox said:
on stock recovery do wipe data. after this see only logo. When try flash with Odin any rom he freeze on ~80% "factory fs - write data". What i can try do? (sry for bad eng). i was try many instruction for unbrick and nothing work..
Click to expand...
Click to collapse
You are super bricked. There's nothing you can do, but get a motherboard replacement from Samsung.

andreww88 said:
You are super bricked. There's nothing you can do, but get a motherboard replacement from Samsung.
Click to expand...
Click to collapse
its 100% ? no variants?

WarFox said:
its 100% ? no variants?
Click to expand...
Click to collapse
It froze at factoryfs.img so yes. There is a thread in the General section that you can look into that has to do with re-partitioning and such that MIGHT make it work sort of, but it is really technical and it has no guarantees.
Edit:
You COULD try to Odin one more time, if it will let you back into download mode, but probably won't work.

ill try 10 times... phone going in download mode, but no recovery. and i flash phone since siemens c55, and can do re-partitioning but need link on it, ill try 1, but in that 1. says flash recovery and go in. Ill try flash it and take yellow triangle..

WarFox said:
ill try 10 times... phone going in download mode, but no recovery. and i flash phone since siemens c55, and can do re-partitioning but need link on it, ill try 1, but in that 1. says flash recovery and go in. Ill try flash it and take yellow triangle..
Click to expand...
Click to collapse
Kinda hard for me to understand. You did or didn't try multiple times? You did or didn't try re-partitioning? Look in the General thread. I don't know anything about it cause I haven't had to try it. You only get a yellow triangle if you flash a custom ROM with PC Odin.

i did multiple times, didnt do re-partitioning but read about and do first action. triangle get when flash kernel or recovery dont remember

link on re-partitioning?

I think it was posted by hg42
Zapped through server hops to XDA forums

praetorius said:
i think it was posted by hg42
zapped through server hops to xda forums
Click to expand...
Click to collapse
i revive it

WarFox said:
i revive it
Click to expand...
Click to collapse
i have exactly the same problem here. care to share, how u revived ur Note?

Deleted by myself

I think you might want to read this http://forum.xda-developers.com/showpost.php?p=27019956&postcount=234

ocpj said:
i have exactly the same problem here. care to share, how u revived ur Note?
Click to expand...
Click to collapse
i use pit files with shifted adress, dont remember where find it/

[Guide]How to revive your bricked Gnote
http://forum.xda-developers.com/showthread.php?t=1661590

[Q] Can this i9000 be recovered?? or is it totally bricked??

Hey all,
I have recently been given a phone by a friend, a SGS i9000. He bought it as is, and being n00b he couldnt describe anything to me about how or why it was like this. As I have a i9000 myself I took a bit of a look at it, I have no idea what firmware,rom,kernel etc is on it. After researching around it seems to be locked in a bootloop, I can not access any recovery menu, if I hold the power + home button I get the screen below (found this button combo somewhere in the forums, attaining to the Samsung anycall, korean?), but when plugged into my computer it comes up saying "windows could not recognize device blah blah". Any hope??? Last resort will be to get a jig, but ive never had to use them before and not sure if it will solve my issue. Any help would be much appreciated.
Thanks
battznz

battznz said:
Hey all,
I have recently been given a phone by a friend, a SGS i9000. He bought it as is, and being n00b he couldnt describe anything to me about how or why it was like this. As I have a i9000 myself I took a bit of a look at it, I have no idea what firmware,rom,kernel etc is on it. After researching around it seems to be locked in a bootloop, I can not access any recovery menu, if I hold the power + home button I get the screen below (found this button combo somewhere in the forums, attaining to the Samsung anycall, korean?), but when plugged into my computer it comes up saying "windows could not recognize device blah blah". Any hope??? Last resort will be to get a jig, but ive never had to use them before and not sure if it will solve my issue. Any help would be much appreciated.
Thanks
battznz
Click to expand...
Click to collapse
Identify what Phone it could be by checking its top corner for a Tucked in TV Antenna ...if you can pull out an Antenna its an M110S, if not it is an i9000 flashed with a wrong ROM. IF its M110S , just use PIT STOP link below to resolve using How to flash guide
The Anycall screen you are getting means it is still in download mode and can be detected by Odin, if not do a battery pull ( follow My Android Solutions, link below)

xsenman said:
Identify what Phone it could be by checking its top corner for a Tucked in TV Antenna ...if you can pull out an Antenna its an M110S, if not it is an i9000 flashed with a wrong ROM. IF its M110S , just use PIT STOP link below to resolve using How to flash guide
The Anycall screen you are getting means it is still in download mode and can be detected by Odin, if not do a battery pull ( follow My Android Solutions, link below)
Click to expand...
Click to collapse
Thanks for your reply.
I have looked to see if there is an antenna, nothing there. Ive tried rebooting the PC, and done a battery pull. Whilst in bootloop ive plugged in the phone, nothing comes up. Whilst in download mode, ive plugged in the phone, device detected but unrecognized. I removed everything......then......
1) Uninstalled all drivers and KIES from my PC > Reboot
2) Went to Android solutions, started with step one, no help.
3) Went onto step 2 (Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable),I checked to see if any pins were bent, and cleaned the contacts using some mini brushes I had. I am using a Samsung USB, same one i use for my i9000, which works 100%. Installed and tried every driver seperately, whilst trying to see if odin would detect anything.
NOTHING :crying:
Tried different ports etc. The only response I get is when ive put the phone into download mode (Home+Power), then all I get when connected to PC is "USB Device not Recognized". Im grateful that I get that, but cant do much else haha.
Can you suggest anything else?? can I even use the jig as a last resort???

Did you remember that you need to reinstall drivers?

monkeywithbanana said:
Did you remember that you need to reinstall drivers?
Click to expand...
Click to collapse
Hey thanks for your reply, if youre referring to the PC, then yes I removed all the drivers that did not work, and lastly reinstalled Samsung KIES. Still no change to the device being recognized by windows.

battznz said:
Can you suggest anything else?? can I even use the jig as a last resort???
Click to expand...
Click to collapse
Nothing wrong with the phone except that its, now loaded with a wrong boot loader, ...try borrow a lap top or PC to connect in download mode, to flash a i9000 rescue or resurrection kit from MY Androids collections link below

xsenman said:
Nothing wrong with the phone except that its, now loaded with a wrong boot loader, ...try borrow a lap top or PC to connect in download mode, to flash a i9000 rescue or resurrection kit from MY Androids collections link below
Click to expand...
Click to collapse
Thanks I will give it a try, will let ya know how I get on.

Hi,
Thanks for the guide, i got 90% there and the program closed. This is what I got, when using the heimdall rescue kit:
Uploading KERNEL
100%
KERNEL upload successful
Uploading MODEM
100%
MODEM upload successful
Uploading FACTORYFS
100%
FACTORYFS upload successful
Uploading DBDATAFS
100%
DBDATAFS upload successful
Uploading CACHE
100%
CACHE upload successful
Uploading IBL+PBL
100%
ERROR: Failed to confirm end of file transfer sequence!
IBL+PBL upload failed!
Ending session...
Rebooting device...
Click to expand...
Click to collapse
Please HELP me
What do I do from here??

Attached are the results I get when trying to use odin and trying to flash EZBASE.
I get further in flashing using heimdall. Without trying to sound n00b, can I not flash the bootloader to something that works???

battznz said:
Attached are the results I get when trying to use odin and trying to flash EZBASE.
I get further in flashing using heimdall. Without trying to sound n00b, can I not flash the bootloader to something that works???
Click to expand...
Click to collapse
try ezboot from My Android collections link below

xsenman said:
try ezboot from My Android collections link below
Click to expand...
Click to collapse
Hi, ive tried ezboot, still no luck, I get the same error message in odin. Grrr frustrating, seem to be throwing solutions at it but nothing is cracking it.
Is there a way i can do it through heimdall?? seems to get more done when trying to flash except the error i get above?? perhaps how to do a bootloader flash using heimdall not odin??
Thanks

battznz said:
Hi, ive tried ezboot, still no luck, I get the same error message in odin. Grrr frustrating, seem to be throwing solutions at it but nothing is cracking it.
Is there a way i can do it through heimdall?? seems to get more done when trying to flash except the error i get above?? perhaps how to do a bootloader flash using heimdall not odin??
Thanks
Click to expand...
Click to collapse
I think the solution to your problem has been found, and your phone is actually an M110S Anycall galaxy S..read this thread http://forum.xda-developers.com/showthread.php?t=1888319...so you need to use the M110S repair kit, download from Pit Stop, link below and flash as per guide or like this http://forum.xda-developers.com/showpost.php?p=28174768&postcount=4774

First of all I would like to thank you xsenman, your posts and guides on these forums have been a huge help. Going along with what you said in your last post, I have started downloading the repair kit, then hopefully do an official update for here (Australia).
I just want to add, you may want to add the the following as a solution to a lot of problems (it helped me verify).
I had a look at this thread:
http://forum.xda-developers.com/showpost.php?p=30797809&postcount=1
And about half way through the thread is IMEI check
I entered the IMEI from my phone (an official samsung gti9000), and it came back with a result saying exactly that.
I then entered the IMEI from my friends phone (bought from ebay >:/ go figure), and it came back saying it was M110S but so has it that the internal sticker on my friends phone says model: GT-i9000
If anyone else gets into a confusion like I have, which it is hard to tell if its fake or not. Posting/sticky the imei check will save a lot of time, heart ache and possibly from creating a $200 paper weight.
Once again thank you so much, hopefully this repair kit will work and the phone will be up and running.
:good:

[Q] Gt-I8190 partitionning lost. Please HELP

Hi guys, newbie here trying not to brick my s3 mini any more than it is.
It all started with the lack of mobile signal, so i changed the sim card-didn't work
After a hard reset it got worse, as i got a black popup on my screen :
PDA: I8190XXAMG4
Phone : XXXX
CSC : NONE
H/W : Not Active
EF Cal Date : NONE
SMD : 01N, PBA : 04N
CAMERA : N/A, FrontCam : N/A
TSP : 0X11
TSK : 0x19
Band : GPRS, CH : N/A
UART : N/A, USB : N/A
Also, the phone will not go in recovery mode anymore, only on download mode.
I tried flashing a stock firmware with Odin, but no change. The thing is, after the phone restarts, it loses any settings i made (like wireless password, google account, etc), so if i check USB in debugging mode, after restart it will be unchecked again, so for that reason i'm not sure if the reflashing worked.
In download mode it says:
custom binary download: no
current binary:Samsung official
system status: official
At the bottom of the page: HW REV: 0x5
As far as I understand after reading the forum for about 8 hours, i've lost the partitioning of the device.
If any of you has any idea what i could do, please advise.

there are a few threads on how to fix your problem
some more reading involved

efaustino84 said:
there are a few threads on how to fix your problem
some more reading involved
Click to expand...
Click to collapse
Can you please be more specific?
i"ve been looking through the topics and couldn't find anything.
Getting a bit desperate here...bought the phone a couple of weeks ago and i don't really afford another one

Can anyone please help me?:crying:

kstk said:
Can anyone please help me?:crying:
Click to expand...
Click to collapse
refer to the threads on loading stock ROM using ODIN
those will provide you with the information to repair the phone in it's current state
you will then be able to fix the partition

Ok. So I tried numerous times to upload the stock software but absolutely nothing happens, even if ODIN says that the upload was successful. As soon as the phone restarts, it loses any settings i had done, including USB debugging mode, so maybe this is why it doesn't work. I tried selecting a CSC, but after restart it's still:''none''.
The thing is that wireless is working, so i can connect to internet, but i cannot download and install anything (no space). I will try and download an emulator via PC and put it on a memory card.

Of course, it won't read my memory card :|

kstk said:
Of course, it won't read my memory card :|
Click to expand...
Click to collapse
post a screen shot of the options you have enabled when loading via odin

efaustino84 said:
post a screen shot of the options you have enabled when loading via odin
Click to expand...
Click to collapse
here it is

kstk said:
here it is
Click to expand...
Click to collapse
all settings are ok, so flash it via Odin
AND start Odin as Admin dude

I even tried with a pit file and re-partition checked. No result.

Just flashed again with Odin started as admin. No change.

kstk said:
Just flashed again with Odin started as admin. No change.
Click to expand...
Click to collapse
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ

JackoMJ said:
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
Click to expand...
Click to collapse
Just tried that, it didn't work. It's like i didn't do anything at all.
I just can't write anything on this thing
Anyway, thank you very much, guys. Any more ideas are welcome :

Was i supposed to have F. reset time checked as well?

JackoMJ said:
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
Click to expand...
Click to collapse
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition

efaustino84 said:
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
Click to expand...
Click to collapse
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.

kstk said:
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
Click to expand...
Click to collapse
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11

tys0n said:
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It is booting normally, but it takes very long to boot.

kstk said:
It is booting normally, but it takes very long to boot.
Click to expand...
Click to collapse
You still got that FactoryApp popup on screen?
Are you rooted?
Can you enter recovery? If so, what recovery do you have?

[Q] Galaxy S3 lte Brick [Repartition]

Hello! S3 Lte (i9305) of my friend is bricked and gave me to solve this problem.. I have never been this stage and I have no idea .. Flashing offical rom with odion is stucked at hidden for so long and reflashed the rom several time but still stuck at Hidden, so I reflashed the offical rom with checking Auto reboot, Nand-erase , and F.Rest.. After checking Nand-erase, rom is flashed successfully but there was no partition .. So I reflash with pit file and repartition but still stuck at Get PIT for mapping.. in flashing .... How i can solve this! Plz help me! I only add PDA and PIT ..
Need other file like CSC,etc (I don't know excatly what are they) This is my 1st experience with bricked Samsung...
Sry for my bad english..

Screen shoot of odion

Before reading, the steps I used is to completely reformat the phone leaving nothing behind.
I have bricked my phone before. What I did is:
1. Download the stock firmware of your phone on sammobile (depends on your country and service provider)
2. Put your phone into download mode (off and on your phone. When it goes to Samsung title screen, press home, off and volume down button at the same time.)
3. Connect your pc to your phone and open odin.
4. Check and see if the message shows pass.
5. Under bootloader, open the md5 file that you downloaded before.
6. Start and wait till it finish.
7. Check your phone and reconfigure as if you have a new phone.
Hope this helps

Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app

xyp3r said:
Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
did you do a full wipe?

emmc is fried

SamC95 said:
did you do a full wipe?
Click to expand...
Click to collapse
Yes bro... I full wipe with phliz recovery.. mount error was occur at the starting recovery..

opssemnik said:
emmc is fried
Click to expand...
Click to collapse
How I can solve ?

xyp3r said:
How I can solve ?
Click to expand...
Click to collapse
change emmc chip(nly very skilled people will know how to do so) or change the whole motherboard

Battery died after flashing a rom in recovery mode. Phone doesn't turn on.

Hey guys, I am in a big fuss here, I was flashing new MIUI MM 6.0 and it was taking to long to flash.. I was very sleepy then and I accidentally fell a sleep. The battery was at 88% when I started doing it. So I guess the flashing must have finished by the time the battery ran out.
Now I have kept it for charging for over 2 hours and it dint turn on. Then I tried going to fastboot or recovery, dint work. Then I connected it to the PC to see if the phone is on but the display is somehow dead and WALLA!!! It gets connected. BUT there is a catch, it now shows me SIX different drives out of which 2 drives I can access. I dont know whats going on! Someone please help me. I have to travel 450 km for service center.

del

same problem bro.. how is your mi3 now?

Looks like partition has messed up. Before flashing that MIUI sh*t were you on extended partition table?

http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
Please see this link, it might help...

anshude1 said:
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
Please see this link, it might help...
Click to expand...
Click to collapse
same problem here, I flashed SMIUI it says cant mount /dev/block/platform/msm_sdcc,. I just let on that screen, and it displays installing SMIUI system. It finishes but phone died after that.
Now same problem with the OP, no power, no fastboot mode, no recovery, when connect to a pc it displays many Drive windows. Please help.
Now I managed to removed the battery still the same no power.
Help please guys.

i have a perfect solution for this problem....100%working...now u have to flash a fastboot rom using mi flash tool from PC.....u can search it on google or u wanna know exact details then u can mail [email protected]

Faced same problem (soft brick) , steps followed to fix it
Connected to PC to check if the phone is still alive or hard bricked (yep it was , i got a lot of new driver pop ups)
I went through some MIUI forum and understood that MM roms have script which changes partition size over stock partition , hence the soft brick if u flash it in extended partition
Downloaded an old fast boot room (MIUI 7 kitkat) and tried to flash it using MIflash tool , but faced another issue in WIN 10 OS.
To fix it had to install latest qualcomm drivers for MI3 and flashed the rom in Safe mode(win10).
Now you can either flash fastboot rom or recovery zip after you change the recovery.

andy96singh said:
i have a perfect solution for this problem....100%working...now u have to flash a fastboot rom using mi flash tool from PC.....u can search it on google or u wanna know exact details then u can mail [email protected]
Click to expand...
Click to collapse
This is a public forum buddy, people aren't playing hide and seek here. So if you've solution or any tips,please share it here or provide a valid link so the user can get touch with it. Yes, google is everyone's friend, but do not ask the user to send email for solution.