I've been trying to flash Cm 10.1 on my fire and now it just bootloops constantly and during the flash it says md5 file not found. Anyone know how to solve this?
brchew2 said:
I've been trying to flash Cm 10.1 on my fire and now it just bootloops constantly and during the flash it says md5 file not found. Anyone know how to solve this?
Click to expand...
Click to collapse
Do you have a factory cable? If not you can buy one from eBay or Amazon very cheaply.
Sent from my CM10.1 Kindle Fire Hd
Related
Guys I just rooted someones kindle fire hd and when I boot into twrp I do everything I am supposed to. When it goes to boot the word google appears with two gears that spin then it just stops does nothing. I have to restore it from backup to get back to the kindle os. I used different roms and this was the last one that I tried with no luck
[05/14] ALPHA CM10.1 + 3.0.50+ KERNEL
is there something I am doing wrong?
Did you install the stack manually or did you use FireFlash for TWRP?
Katalystik said:
Did you install the stack manually or did you use FireFlash for TWRP?
Click to expand...
Click to collapse
I used the fire flash utility. No good doing that?
justblinded said:
I used the fire flash utility. No good doing that?
Click to expand...
Click to collapse
FireFlash isn't at fault. I did the same thing when I installed TWRP on my Kindle. The image you're seeing is an actual Google Nexus boot animation, but why it's on an Amazon device, no idea. I do know it froze.
No, fireflash is fine, i just didnt know if you checked the tickbox to install the stack. The google animation? I'm assuming he's using the same tabletUI rom as me, it comes with that animation, if so, the reason its not booting is because the 1.5 kernel it comes with doesn't work with your Kindle, all kindles hardware is different so you need to go to the tabletui rom thread and download the updated version to flash or the 1.2Ghz kernel instead.
Hope this helps.
Katalystik said:
No, fireflash is fine, i just didnt know if you checked the tickbox to install the stack. The google animation? I'm assuming he's using the same tabletUI rom as me, it comes with that animation, if so, the reason its not booting is because the 1.5 kernel it comes with doesn't work with your Kindle, all kindles hardware is different so you need to go to the tabletui rom thread and download the updated version to flash or the 1.2Ghz kernel instead.
Hope this helps.
Click to expand...
Click to collapse
Katalystik can you put a link in for the tabletui rom thread? thanks!
So the guy who has the kindle fire 7 second gen gave it back to me cause he bought a fast boot cable. I went to flash a rom and now it wont flash anything it just says failed in red. Is there something wrong with twrp?
OK the tablet ui link is here: http://forum.xda-developers.com/showthread.php?t=2265465
As to the part about twrp being messed up that is doubtful, I'd guess the zip your flashing was a bad download or corrupt, that usually what comes to mind in these situations, I suggest checking the md5sum with esfile explorer before you try to flash the zip, though I am not sure what you are flashing because I don't know if u found the tablet ui before I posted it or if your flashing something else, and I think jester didn't include the md5sum for his ROM... Also if u are flashing from stock to a cm build u need to wipe system, and do a factory reset and I always clear my dalvik cache and cache before I reboot into the new os.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
done it today, seems to work fine, on the second newest cyangeon mod, but there is no playstore, google one from android police but it doesnt open just closes, is there something i need to do?, thanks
Whelan189 said:
done it today, seems to work fine, on the second newest cyangeon mod, but there is no playstore, google one from android police but it doesnt open just closes, is there something i need to do?, thanks
Click to expand...
Click to collapse
Did you flash the gapps zip after you flashed the CM10.1 zip? Get it at goo.im, gapps-jb-20130301-signed.zip.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Did you flash the gapps zip after you flashed the CM10.1 zip? Get it at goo.im, gapps-jb-20130301-signed.zip.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
ok, thanks no i havent ill do now but in the newest cm how do i get in recovery mode? its not where it was on 10.1
Whelan189 said:
ok, thanks no i havent ill do now but in the newest cm how do i get in recovery mode? its not where it was on 10.1
Click to expand...
Click to collapse
Go to settings, about tablet and tap the build number several times until the developer options is enabled. Then go there and put a check in the advanced reboot checkbox. Then when you hit the power off/reboot menu, a second menu comes up to let you select recovery.
Sent from my Nook HD+ running CM10.1 on emmc.
First, would like to thank the mods/developers for all the hard work, I am loving my Kindle Fire HD because of your hard work.
Secondly, I did search the forums about this question. My guess is this has been answered but I just didn't use the right keywords to find what I am looking for.
I am currently using Cm-10.1-20130726 and it is working perfectly, however what I wanted to do is update to the latest build. In order to ensure I do not brick my kindle or make any errors, just wanted to verify the steps that I need to do to complete this.
I have downloaded hashcodes 08/12 BETA CM10.1 + 3.0.50+ KERNEL,
Do i need to dl gapps or is my current install fine, if so can you please provide a link, searching provided a lot of results.
Then, what steps exactly do I need to do to update, i do not want to lose my current apps so i prefer not to guess on on these steps. Thank you so much for your help.
goob982 said:
First, would like to thank the mods/developers for all the hard work, I am loving my Kindle Fire HD because of your hard work.
Secondly, I did search the forums about this question. My guess is this has been answered but I just didn't use the right keywords to find what I am looking for.
I am currently using Cm-10.1-20130726 and it is working perfectly, however what I wanted to do is update to the latest build. In order to ensure I do not brick my kindle or make any errors, just wanted to verify the steps that I need to do to complete this.
I have downloaded hashcodes 08/12 BETA CM10.1 + 3.0.50+ KERNEL,
Do i need to dl gapps or is my current install fine, if so can you please provide a link, searching provided a lot of results.
Then, what steps exactly do I need to do to update, i do not want to lose my current apps so i prefer not to guess on on these steps. Thank you so much for your help.
Click to expand...
Click to collapse
Generally if you upgrading between diff versions of the same rom, there is no need erase data, however if hashcode advised to flash it and wipe data, then you should.... I don't think I answered your question for this ver, but I flashed his updates without wiping, but am now on kinology, as my parents wouldn't let me use the credit card on the play store (and I don't want to crack apps, even if I bought them at the Amazon store)
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Thanks, now to figure out how to boot into twrp again. Gapps updates, are not needed?
goob982 said:
Thanks, now to figure out how to boot into twrp again. Gapps updates, are not needed?
Click to expand...
Click to collapse
Hold the vol up button while the Orange kindle fire logo appears, you can flash the updated gaaps if you choose....just flash the rom (do nothing else) but if this new ver has an updated kernel, wipe dalvik cache, and cache partitions before flashing.
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
itouchables said:
Hold the vol up button while the Orange kindle fire logo appears, you can flash the updated gaaps if you choose....just flash the rom (do nothing else) but if this new ver has an updated kernel, wipe dalvik cache, and cache partitions before flashing.
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Click to expand...
Click to collapse
Done, last question says flash successful, there is a wipe cache/dalvik should i do that or just reboot?
goob982 said:
Done, last question says flash successful, there is a wipe cache/dalvik should i do that or just reboot?
Click to expand...
Click to collapse
Just reboot, any wiping would have to be done before the rom... doesn't matter, good luck man :thumbup:
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Hello Friends!! im recently bought an Atrix HD and I bought it because i like the model and i saw that is compatible with CM, i was reading about flashing this cell, i unlocked the bootloader and also root the cellphone with the tutorials of this page, but when i tried to install CM from sd something happens and the installation its aborted, i dont know if i have to install also a custom recovery, i download this one http://forum.xda-developers.com/showthread.php?t=2298489 its that a custom recovery? the file that im trying to flash is downloaded from the official page of CM its a RC firmware. im running actually android 4.1 the original of AT&T. hope some one can help me.
Use this for recovery. http://forum.xda-developers.com/showthread.php?t=2421418
Fastboot flash on the computer, then download the latest nighty from get.cm I think. What error? Status code? Those would be nice to help you out more
Sent from my MB886 using xda app-developers app
Don Mike said:
Hello Friends!! im recently bought an Atrix HD and I bought it because i like the model and i saw that is compatible with CM, i was reading about flashing this cell, i unlocked the bootloader and also root the cellphone with the tutorials of this page, but when i tried to install CM from sd something happens and the installation its aborted, i dont know if i have to install also a custom recovery, i download this one http://forum.xda-developers.com/showthread.php?t=2298489 its that a custom recovery? the file that im trying to flash is downloaded from the official page of CM its a RC firmware. im running actually android 4.1 the original of AT&T. hope some one can help me.
Click to expand...
Click to collapse
Maybe what happened to you is that you had flashed a custom recovery, but then in the next reboot the stock recovery was automatically re-flashed.
Try to install custom recovery by Terminal Emulator, then reboot to recovery right after you flashed using command code. I believe you can search for this inside our Atrix HD forum sector.
If you can boot to CWM recovery, there will be a CWM icon instead of an Android bot with its belly opened as in Stock recovery.
Good luck.
Done
Ok thanks too much!! just need instal the Recovery, after that the installation of CM run and installation finished as normal!! there is a new version of CM 10.1 stable, it was what I flash it!!
Don Mike said:
Ok thanks too much!! just need instal the Recovery, after that the installation of CM run and installation finished as normal!! there is a new version of CM 10.1 stable, it was what I flash it!!
Click to expand...
Click to collapse
please show me clearly about what you did, files you used. I have a problem that cyanogen logo turn around and around and i can't use my phone
thanks
finally i solved problems by myself
My friend just got an hd+, installed the newest nightly cm11, and that version wouldn't let his keyboard run. I downloaded the newest snapshot and installed that, now it gets stuck on the cm loading screen and will not fully boot up. Any help?
bassballboy said:
My friend just got an hd+, installed the newest nightly cm11, and that version wouldn't let his keyboard run. I downloaded the newest snapshot and installed that, now it gets stuck on the cm loading screen and will not fully boot up. Any help?
Click to expand...
Click to collapse
Keyboard errors usually mean you used the wrong version of gapps. I suggest you wipe /system and factory reset and flash CM11 again with the correct version of gapps.
Sent from my BN NookHD+ using XDA Premium HD app
Got it fixed, thank you!