I have had my Bionic for a while now and have been thinking about rooting it. I finally got the ICS update but have been using GO Launcher too much to even notice it. Anyway, like I said, I want to root my phone. I am current on all updates. For some reason it's running at a tenth of it's memory tho not much is running that I can see. This leads me to believe there's things running in the background that I can not see. I am reluctant to get rid of all my apps, but I also don't want anything that's eating all my resources either. I kinda want to start new but kinda don't. I guess I just don't like letting go of anything.
I know this is selfish of me, but I am hoping that this thread will stay clean of others chiming in asking about their issues. I just don't want the thread to lose focus since this is about what I hope to get from my phone.
Ok, so here are my questions or favors to ask:
Since my phone is fully updated, do I need to do some other updated steps for rooting my phone or is rooting always the same no matter the build or version?
When I go to root my phone, I back up everything first and then I get it back, right?
I read somewhere that it's possible to brick the phone. What precautions should I take to avoid that?
Can I get all the benefits of a rooted phone without a ROM?
Are ROMs really that awesome that I should get one, or three?
I am interested in a ROM after some posts and pages I read. I was attracted to CM at first but so is everyone else probably at first. Does CM even work on the Bionic? And if it does, does everything work like the camera and Bluetooth?
As I said earlier, I use GO Launcher. One of the things I really like about it is the folders I can make in the App Drawer. Now CM is based off of ADW Launcher, but no options to make folders in the app drawer? Is it possible in any way if I choose CM as my main ROM?
Is CM overrated? Liberty and Eclipse look nice too. I also read a little, very little, about AOKP. Any suggestions? I want to get rid of a lot of extra processes and bloatware but I don't want to lose some of the apps pre-installed like Google Maps and Navigation, etc. Unless there are other, much better replacements that anyone knows of.
I know most of this is personal preference but I am hoping to find a comprehensive way at figuring out what's best for me.
I had more questions but I will wait and ask more as the thread continues.
Oh, I don't really need answers in step by step unless I ask. A simple link would suffice unless it's not covered anywhere.
Thanks for reading this, I hope I am not frustrating anyone as I am sure similar posts have been made.
You're basically asking to have this entire forum summarized into one post...
Spend some time reading, then ask smaller, more concise questions.
Not trying to sound like a ****, but i could spend an hour answering all of that. Half of those questions could be answered with some reading of the ROM specific threads.
Sent from my DROID BIONIC using Tapatalk 2
Ok, I know that SOME of the questions are answered somewhere else. The thing is that after I read one thread only to find it unsolved, I read others that are are 50 pages long going nowhere as well. I haven't seen anything about my phone being fully updated and I am not going any further until I know for sure from someone like a DEV that I can.
Some of these questions are yes/no questions, which wouldn't take long at all to answer, maybe even less time it takes to write a complaint about my post. I certainly don't expect one person to write for an hour on every topic I asked about. I thought it would be a collective effort.
I guess I will take this slowly.
Since my Droid Bionic is updated to the current versions, do I need to do this differently than others have used in the past to root this phone?
Where is the best method to do this?
Before I start, I have to backup everything, right? If so, what's the best way to go about backing up everything?
I read somewhere that there are 3 things you should do to make sure you avoid bricking. I have since lost it. Does anybody know a surefire way to do this.
Please be gentle.
CycoPuppet said:
Ok, I know that SOME of the questions are answered somewhere else. The thing is that after I read one thread only to find it unsolved, I read others that are are 50 pages long going nowhere as well. I haven't seen anything about my phone being fully updated and I am not going any further until I know for sure from someone like a DEV that I can.
Some of these questions are yes/no questions, which wouldn't take long at all to answer, maybe even less time it takes to write a complaint about my post. I certainly don't expect one person to write for an hour on every topic I asked about. I thought it would be a collective effort.
I guess I will take this slowly.
Since my Droid Bionic is updated to the current versions, do I need to do this differently than others have used in the past to root this phone?
Where is the best method to do this?
Before I start, I have to backup everything, right? If so, what's the best way to go about backing up everything?
I read somewhere that there are 3 things you should do to make sure you avoid bricking. I have since lost it. Does anybody know a surefire way to do this.
Please be gentle.
Click to expand...
Click to collapse
1st question . No, your phone is not special since it is updated what worked for others will work for you.
2nd follow this link and the instructions to the letter http://www.droidrzr.com/index.php/topic/4026-samurihls-house-of-bionic/
3rd . Since you are stock. I would suggest using Verizon's back up services. TiBu requires root. IMHO I wouldn't bother because Google automatically backs up contacts and most roms require you to do a full data wipe.
There is no magic formula to keep from bricking your phone. Just follow directions and if you can't tolerate the risk don't do it.
From my EVOLVED bionic
Obsidian_soul said:
1st question . No, your phone is not special since it is updated what worked for others will work for you.
2nd follow this link and the instructions to the letter Can not post links
3rd . Since you are stock. I would suggest using Verizon's back up services. TiBu requires root. IMHO I wouldn't bother because Google automatically backs up contacts and most roms require you to do a full data wipe.
There is no magic formula to keep from bricking your phone. Just follow directions and if you can't tolerate the risk don't do it.
From my EVOLVED bionic
Click to expand...
Click to collapse
That link no longer works
Also I found an article named "Learn How-To Root, Custom Recovery, Backup, And De-Bloat Your DROID BIONIC" while searching around for ROM ideas and such. Anyway, after reading this, it almost seems as if I don't need to do factory reset. Is this ok?
CycoPuppet said:
That link no longer works
Also I found an article named "Learn How-To Root, Custom Recovery, Backup, And De-Bloat Your DROID BIONIC" while searching around for ROM ideas and such. Anyway, after reading this, it almost seems as if I don't need to do factory reset. Is this ok?
Click to expand...
Click to collapse
Just last week I started with a stock ICS Bionic and followed this guide to root: http://droidbionicroot.com/droid-bionic-root/how-to-root-ics-on-droid-bionic-and-motorola-android/
That went very well. I wanted to try out JB 4.2.2, so I installed SafeStrap and an official CM 10.1 nightly. The net result was that I had a very unstable phone until I did a factory reset . As of this writing, however, it's behaving extremely well. YMMV.
Ratamacue said:
Just last week I started with a stock ICS Bionic and followed this guide to root: Can not post links
That went very well. I wanted to try out JB 4.2.2, so I installed SafeStrap and an official CM 10.1 nightly. The net result was that I had a very unstable phone until I did a factory reset . As of this writing, however, it's behaving extremely well. YMMV.
Click to expand...
Click to collapse
Ok, so you flashed the ROM, didn't work so well, then you did a factory reset. Doesn't a factory reset wipe the phone? If that's the case, doesn't it wipe out the ROM?
Oh one more thing. Following this link, does this wipe the data from my phone? Anything I should back up before doing this? Should I do any updates before flashing CM 10?
CycoPuppet said:
Ok, so you flashed the ROM, didn't work so well, then you did a factory reset. Doesn't a factory reset wipe the phone? If that's the case, doesn't it wipe out the ROM?
Click to expand...
Click to collapse
No, a factory data reset doesn't wipe the ROM, but it does require running the initial setup (as if you were setting up a brand new phone).
CycoPuppet said:
...one more thing. Following this link, does this wipe the data from my phone? Anything I should back up before doing this? Should I do any updates before flashing CM 10?
Click to expand...
Click to collapse
You definitely want to back up everything you're not willing to lose. I ran a backup the very first thing after installing SafeStrap, and it was a good thing because with all my messing around I managed to bork my stock ROM to the point that it wouldn't boot. Fortunately, all I had to do was restore it from a backup.
My phone on CM 10.1 had enough issues with freezing and crashing that I decided this morning to try a different ROM. So far, I've had really good results with Icarus HD (a custom ICS ROM). I really don't know if my experience with CM 10.1 was typical.
OK, so I want to root. Now does rooting wipe any data? Regarding Safestrap, I install that first before rooting?
Rooting doesn't wipe any data. Root first, then install SafeStrap.
Okay, I will be rooting and installing safestrap when I get home for work today. I will still have more questions I am sure. I do have a few before I actually start rooting or right after.
I know safestrap makes a backup/recovory, but is it full recovery only or can I recover portions, like say my Dolphin browser with the settings and bookmarks?
I read that when making a backup of stock ROM, use sdcard, I'm sure that means external but when flashing a ROM, will that wipe data from the external card?
When setting up slots for multi booting ROMs, gernally how much storage do they need?
If I have two different ROMs, does it act like user accounts in Windows, would I have to download the same app on each ROM or do both ROMs have access?
Can one ROM have stuff I don't want the other ROM to have visible?
CycoPuppet said:
I know safestrap makes a backup/recovory, but is it full recovery only or can I recover portions, like say my Dolphin browser with the settings and bookmarks?
I read that when making a backup of stock ROM, use sdcard, I'm sure that means external but when flashing a ROM, will that wipe data from the external card?
When setting up slots for multi booting ROMs, gernally how much storage do they need?
If I have two different ROMs, does it act like user accounts in Windows, would I have to download the same app on each ROM or do both ROMs have access?
Can one ROM have stuff I don't want the other ROM to have visible?
Click to expand...
Click to collapse
1. SafeStrap is full recovery only. Use Titanium Backup for backing up apps and data.
2. Flashing a ROM won't do anything to your external SD card.
3. When you set up ROM slots, you'll be asked how much room you'd like to allocate for data. The choices are 1, 2, or 3 GB. I started off allocating 3 GB to the stock ROM slot and was never able to load more than 3 separate ROMs before I ran out of room. I'd start with just using 1 GB for data.
4. Each ROM is an island. You have to download the apps separately (unless when you go through the initial setup you tell the system to restore apps and settings from the Google servers.)
Cool. I rooted and got safestrap but it's version 3.05 and not 3.11. Some ROM I was interested in said must have 3.11, which I am assuming that's the newest one so far. I did watch a tutorial about getting the current version, so no question there.
So the ROMs are separate islands and during flashing they can be in slots allocated up to 3GB. Does that mean that's the only amount of storage I can have when running that ROM? Say I like taking lots of photos and didn't save them to my external card, could I essentially run out of space or is the storage allocation just for the ROM itself and any updates it may have?
Sorry about these series of questions, just want to make sure I am doing it correctly in case I might make a mistake for future's sake.
The storage allocation is for the ROM, apps, and data that haven't been assigned to the external SD card. You can definitely run out of space if you load several ROMs and don't save any of your data to the external SD card.
Also, keep in mind that when VZW sends the OTA update to 4.1 next week, the only way to keep root is to root in ICS and use Voodoo OTA Rootkeeper to protect root before you take the OTA. If you flash the system image, you will lose root, and there is no known working root exploit for the Bionic JB release.
Lost Root
Hey, I used Voodoo before flashing the 4.1 update, but forgot to update the binary beforehand, and therefore lost root. Anyone have any luck yet with an exploit for the OTA?
And there's no working FXZ before this now, correct? This software is now the earliest version I can FXZ to?
auglove3rd said:
Hey, I used Voodoo before flashing the 4.1 update, but forgot to update the binary beforehand, and therefore lost root. Anyone have any luck yet with an exploit for the OTA?
And there's no working FXZ before this now, correct? This software is now the earliest version I can FXZ to?
Click to expand...
Click to collapse
Not root exploit yet for bionic JB. And if you try to FXZ back to an earlier version, you will brick your phone.
OK, so I rooted, got safestrap tho still not updated to 3.11, got TBU (free), got Voodoo. I had to race the clock today cuz it was updating android, or at least downloading the update. The root process I used gave me SuperSU and didn't tell me the version for the SU binaries. I searched around and all I could find was info on SuperUser in regards to backing up root. I uninstalled SuperSU, kinda. I just told it to use a different SU cuz when I used SuperUser and updated the binaries, SuperSU wanted to update them, then I opened SuperUser and the binaries reverted back. I was worried so I just told SuperSU to use a different SU. Was that ok? I didn't update to JB yet. Has there been luck with the Bionic using voodoo and keeping root after the JB update?
All this back and forth means I'm making a full image backup, then trying various ROMs. I've tried CM10.1, too many issues (no car dock, trouble installing lots of apps, no speakerphone). Next is... Whizzed Bean?
EDIT: Seems Speakerphone issue was fixed in the 0420 nightly. Will have to try it again.
AND I copied all the backups to my PC, so I can restore them at will (provided the phone still boots, that is... )
If I can't find a JB ROM I like I guess I can do HouseofBionic reflash (which did NOT cause me to lose data, as I upgraded to ICS that way) then allow the JB OTA to go through.
*sigh*... So much bull**** in these updates.
Hope someone sees my question above. I still haven't updated to JB yet. Once I do I will be flashing ROMs. I am interested in CM, Liquid Smooth, Icarus Hd and Wizzed Bean or Synergy (executioner ) Both WB and Synergy look indentical. What is the differences.
CycoPuppet said:
Hope someone sees my question above. I still haven't updated to JB yet. Once I do I will be flashing ROMs. I am interested in CM, Liquid Smooth, Icarus Hd and Wizzed Bean or Synergy (executioner ) Both WB and Synergy look indentical. What is the differences.
Click to expand...
Click to collapse
WB is a fork of CNA (codename Android) 4.1 JB (which is itself based on AOSP)
while Synergy is a fork of the standard Moto ICS (.246).
Yes, they look identical because they both used the Samsung UI elements.
So, I've been searching this forum for an hour or so, trying to find a tutorial for installing cm7. I can't find a single thread about it.
I already downloaded a stable cm7 zip file to flash. However, I have no idea how to go through with this. I just rooted my OG Droid a few minutes ago. My only other experience with flashing zips and installing ROM is with my Nook Color.
I don't know if my experience with my Nook can carry over to my Droid. I don't even understand which partition or storage system to flash this ROM to.
I tried a search before this. It doesn't help that this phone doesn't have any specific name besides Droid or Milestone (mine isn't even a milestone; it's from Verizon).
Some help or links would be appreciated. I'm sorry about posting an entire thread about this.
SacTappingUni said:
So, I've been searching this forum for an hour or so, trying to find a tutorial for installing cm7. I can't find a single thread about it.
I already downloaded a stable cm7 zip file to flash. However, I have no idea how to go through with this. I just rooted my OG Droid a few minutes ago. My only other experience with flashing zips and installing ROM is with my Nook Color.
I don't know if my experience with my Nook can carry over to my Droid. I don't even understand which partition or storage system to flash this ROM to.
I tried a search before this. It doesn't help that this phone doesn't have any specific name besides Droid or Milestone (mine isn't even a milestone; it's from Verizon).
Some help or links would be appreciated. I'm sorry about posting an entire thread about this.
Click to expand...
Click to collapse
I would recommend taking a look at this guide from the official cyanogenmod wiki on how to install the latest version of CM 7 http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_sholes. As far as where you are installing the ROM to you are installing it to the Droid's internal mtd based storage, whereas on the Nook Color you would be installing it to the external SD card.
Sent from my Nexus 10 using xda premium
Thanks for putting in the time to comment. I'm currently running cm 7 on my droid. The process was apparently much more simplified than installing a rom on the nook. After finding the directions for installing cm10 and successfully following them, I figured I could do the same thing with cm7. It worked fine without any problems. The whole process was much easier without having to worry about boot partitions and external storage, that was mainly what I was worried about.
I guess this topic can be locked or deleted to the mod's content.
Hello, I have had a touchpad for some time and but CM9 and CWM on it some time ago, but it started having some issues recently. So I figured I should try and reinstall a newer version of CM and start from scratch.
I went to this post http://forum.xda-developers.com/showthread.php?t=2026692 and downloaded both the skz+tenderloin-1.10.zip and the gapps zip.
I then placed those into the Download folder on the touchpad.
This is where things took a turn. I rebooted to get into CWM, upon selecting it from the boot menu it kept restarting back to the boot menu. After a few tries it got into CWM. I then wiped the data and did a factory reset, wiped the cache, and then wiped the dalvik like the post said to do. I then went to install zip from sdcard. Found the skz+tenderloin zip and chose to install that. CWM says it starts to install but then before the progress bar fills up at all...it resets back to the bootloader.
At this point I am at a loss with what to do and I would really appreciate any help I can get with this.
UPDATE: I figured starting from scratch would be the best bet, so I have uninstalled CM9 and CWM using ACMEUninstall. Now I am wondering if it is worth using CM10 as my default Android or should I stick with the best CM9.
Either way, if I should use CM9 or 10 can someone either help me or point me in the right direction for the best tutorial on doing this properly?
Restore a backup then DL an updated version of CM9 to flash or upgrade to ACMEInstaller3 to give you a larger system partition along with the latest version of CWM in order to install a CM10 rom apart from oats which does not require the extra space .
There are numerous guides and you should probably read up on a little bit before just flashing a rom to avoid the problems you are having .
sstar said:
Restore a backup then DL an updated version of CM9 to flash or upgrade to ACMEInstaller3 to give you a larger system partition along with the latest version of CWM in order to install a CM10 rom apart from oats which does not require the extra space .
There are numerous guides and you should probably read up on a little bit before just flashing a rom to avoid the problems you are having .
Click to expand...
Click to collapse
The issue I am encountering is there is a ton of info out there, some outdated some not. I restored back to stock webOS with nothing else. I have ACMEInstaller 3 in the Palm directory, so I am ready to install the most stable/best CM9 currently out there, I just don't know which tutorial is the best one to follow. Could you perhaps just link me to one you recommend?
http://rootzwiki.com/topic/31548-ho...-with-sound-camera-microphone-updated-232013/
Should I use CM10 or stick with 9? People say there are still issues with it and it's more of a preview build and not really meant to be used as your standard OS.
Saix_XIII said:
Should I use CM10 or stick with 9? People say there are still issues with it and it's more of a preview build and not really meant to be used as your standard OS.
Click to expand...
Click to collapse
I installed CM9 based on the link above with the AIO package. It worked flawlessly, hopefully my freezing/restarting issues happen less often now. Thanks to all who offered help.
Saix_XIII said:
Should I use CM10 or stick with 9? People say there are still issues with it and it's more of a preview build and not really meant to be used as your standard OS.
Click to expand...
Click to collapse
I can tell you that I use my Schizoid as my daily driver, and it's not a preview.