Related
I've been on XDA today for atleast 3 hours and havent gotten anywhere, I have owned my G1 since dec. 08, rooted it, and kept the firmware at 1.1. I have jesus freak recovery 1.41.
Like I said, I've been on XDA forums for 3 hours already and haven't had any clarity what so ever and am just frustrated right now. Without being 100% I managed to upgrade to 1.6 withy cyanogen 4.2.15.1 I lost everything that was on my phone, it hurts but I'm just frustrated to the point right now that the phone is functioning slower than before and theres lag between the screens and functions. With the upgrade, all of the phones original fucntions "contacts, alarm clock, calculator, etc." force closed and nothing worked, i tried to factory reset and because of the stupid sync issue from the begining skrewed me and about half of my info saved to my google account. I'm so frustrated right now.
I need to know how to install the newest recovery to hopefully work with Nand because I had to Manually rename the DRC83_base_defanged to update.zip and then had to manually rename update-cm-4.2.15.1-signed to update.zip to install each one at a time without having the ability to freely choose what zip i wanted to install.
I haven't been able to find what issues there are with using another phones firmware on the G1, i've seen the Hero firmware, the home screen looks gorgeous and runs like a dream, but I haven't been able to find anything saying that it is okay or a BAD idea to attempt to install it, also I havent been able to find any info on finding the newest g1 firmware or any mods to be able to make the g1 firmware look like the hero, or any other android platforms. I have just found constant cooked firmware after firmware with a hard time decyphering why one may be better than the other. If someone could help me, I would GREATLY appreciate it.
I continute to run into threads "how to root" or "down load this, and download this, and assuming you have something with options you dont have, make it work like this"
Please someone help.
First you need to upgrade your recovery b/c the one you have is very very Ancient with a capital A....You have to wipe before you flash the defanged then flash cyan w/o rebooting.
I want to upgrade my recovery, but I haven't found anything that can help me upgrade the thing. any links to tell me how to do it? and is there no order that I have to install the firmware? instead of having to go from 1.1 to 1.5 to 1.6, can i just go from 1.1 to 1.6 in one hit?
step 1: search the development forum for amon ra's recovery. read the instructions to flash it.
step 2: go to cyanogenmod.com and read the instructions for upgrading from scratch.
once you've done those two things, you'll be much happier.
maniacallyhappy said:
I want to upgrade my recovery, but I haven't found anything that can help me upgrade the thing. any links to tell me how to do it? and is there no order that I have to install the firmware? instead of having to go from 1.1 to 1.5 to 1.6, can i just go from 1.1 to 1.6 in one hit?
Click to expand...
Click to collapse
You don't re-root when you need to change roms you just wipe in recovery mode
You need amon_ra
http://forum.xda-developers.com/showthread.php?p=4647751#post4647751
Like the other guys have said, upgrade to Amon_RA recovery. This allows you to flash updates from any filename, not just update.zip. The link is in my signature, or it's on the G1 Dev Forum in the sticky threads.
After that, boot into recovery and go to the Wipe section. Wipe all the things there, not just data. I never used to wipe everything either and I found that was the source of alot of my problems when changing ROMs. Obviously if you have your SD card partitioned and you choose to wipe your ext then you will lose what is on there.
Cyanogen has good instructions on his Wiki, but basically you want to flash DRC83_base_defanged, DO NOT reboot, and flash CM over the top straight away, then reboot your phone and you'll have a nice clean CM install.
This flashes the HTC Developer image which includes legal Google apps (Gmail, Maps, etc) and then flashes CM over the top which includes all his cool changes but does not delete the Google apps which we aren't supposed to distribute because it's illegal. Perhaps you are not aware, but Cyanogen got a Cease & Desist letter from Google, which is why we now do the defanged base method. More ROMs are moving to this method as time goes on, Pay's ROM and Super D are two which do this.
As an aside, I have found CM is not the fastest ROM. Some people have had better success with a ROM called Super D which is quite popular and includes many of the Eclair bits and pieces which CM does anyway. I personally use Dwang's ROM which is a much more plain Donut image however it absolutely flies. Both of these are linked in my sig, and are usually within the first few pages of the G1 Dev Forum anyway.
Thank you guys so much! I really appreciate how helpful the community has been. I've been having some issues with the the upgrading and maintaining because of my memory card slot dying out. A lot of the times the system will not register that I have my micro sd card in it or it'll say the sd card is blank. I just hope the phone lasts the extra 6 months till the end of my contract
Sent from my T-Mobile G1 using XDA App
maniacallyhappy said:
I've been having some issues with the the upgrading and maintaining because of my memory card slot dying out. A lot of the times the system will not register that I have my micro sd card in it or it'll say the sd card is blank.
Click to expand...
Click to collapse
I used to have this problem too, but it went away when I moved to 1.6 (coincidentally the same time I replaced the SD Card that came with my phone with a new Class 6 card). So either the upgrade of the OS or the SD Card fixed it.
In going to have to try the new men card cause the system is already at 1.6 but the phone is still trying to kill itself.
Sent from my T-Mobile G1 using XDA App
Hi guys,
I recently bought a Nook Color and i want to root it. I am hearing things about Autonooter and putting an image on my micro SD card. Personally i just want the best option to root my Nook, i want to overclock it aswell .
Really sorry if someone has already posted a thread like this, i tried searching for one.
I havent opened my Nook Color yet so guessing the software would be 1.0.0 so how would i root it to 1.1.1 and also stop OTA and install a overclocking software.
Thanks, XDA is amazing, recently rooted my Notion Ink Adam
I too would be interested in such a thing. There is information all over the place, but most seems to be geared toward people that understand the "lingo" and such...
I agree
reading MD5 hash
I'm pretty new to this- I have my NK running 1.0.1 using autonooter and want to update to 1.1. I think I've got a grip on using ClockworkMod, but in the instructions for downloading the 1.1 kernel, it says to "check the MD5 hash"- how do I get this info from the downloaded ZIP file? I don't want to even try and do the update without making sure the download is not corrupt.
Thanks!
rcsrich said:
I'm pretty new to this- I have my NK running 1.0.1 using autonooter and want to update to 1.1. I think I've got a grip on using ClockworkMod, but in the instructions for downloading the 1.1 kernel, it says to "check the MD5 hash"- how do I get this info from the downloaded ZIP file? I don't want to even try and do the update without making sure the download is not corrupt.
Thanks!
Click to expand...
Click to collapse
http://helpdeskgeek.com/how-to/check-md5sum-in-windows-7/
I have to say though, to the OP, that reading through all the guides (and some comments) in the dev forums would be the best because you'll learn all the ins n outs. Having a noob guide is fine but it's fun searching for the info yourself and you'll learn/remember a lot more about your device. having a noob guide that is not comprehensive enough just promotes needless questions when the info is all over the place elsewhere.
Thanks for the link superkevx! Additionally, is there any way to do the check on the Nook itself? I downloaded it using the stock browser & can pull the SD card and check it on my 'puter, but it would be nice to be able to just do it locally.
I agree with you comment about the noob guide- I've learned so much trolling the dev forums...
i do try to find everything its just some things i dont get:
like clockworkmod, i think its to do with disabling OTA but im not sure
which is better,autonooter or installing on SD
,if you could answer these questions i would be really grateful thanks
From one noob to another...
Patrikc8 said:
i do try to find everything its just some things i dont get:
like clockworkmod, i think its to do with disabling OTA but im not sure
which is better,autonooter or installing on SD
,if you could answer these questions i would be really grateful thanks
Click to expand...
Click to collapse
Patrikc8- from my experience (have ROM Manager & Clockworkmod installed in prep for 1.1 update), Clockwork mod is used for making system backups and doing system restores (including installs of custom ROM's)
As far as the SD vs autonooter- installing to the SD means that you typically don't touch the original system files on the Nook itself- good for trying out a ROM that you are interested in but not sure you want to keep. There may be a performance hit though because you're constantly reading from the potentially slower SD media (correct me if I'm wrong on that anybody). I used autonooter to root my Nook and it has worked great since- it is apparently a very easy way to root and I had no trouble doing it.
Aha!
rcsrich said:
Thanks for the link superkevx! Additionally, is there any way to do the check on the Nook itself? I downloaded it using the stock browser & can pull the SD card and check it on my 'puter, but it would be nice to be able to just do it locally.
I agree with you comment about the noob guide- I've learned so much trolling the dev forums...
Click to expand...
Click to collapse
For what it's worth- did a little investigating & you can use Astro file manager to get the MD5sum- just do a long touch to the file in question and choose "Details".
SHould i use auto nooter 1.0.1 or the nook color v1.1.1 ROM?
and im guessing you have to root it first then install a rom then install a kernal?
would there be a big difference in 1.1.1 and 1.0.1 ?
I bought my Nook Color a couple of weeks ago. It was on 1.0.0. The first thing I did was update to 1.0.1. I then downloaded the Autonooter for 1.0.1 on my pc. I also installed Win32DiskImage.exe on my pc, and followed the directions to burn the image to my sd card. I followed the instructions exactly as they are laid out on nookdevs. I then reformatted my sd card back to normal to use for storage in my device.
One thing that happens when you run autonooter is that clockwork recovery is installed. This is simply a tool that will allow you to perform functions at a lower level than the android interface will allow. It my look a little intimidating at first, but go slow, and make sure you are absolutely sure that anything you do in CWR matches what it is listed in the instructions posted. Every action requires a confirmation, so, again, go slow and think it through.
A few days later, the 1.1.1 update came out. I used the updated Rom and instructions here:
http://forum.xda-developers.com/showthread.php?t=932145
Something that I found confusing is using alternate home screens. I finally determined that Zeam was the right choice for me. It is free in the market. The other tool you should download from the market is called Home Switcher. It will let you switch between different launchers (e.g. Zeam, BN stock home, etc.). Again, you will probably have to experiment a bit to get things working the way you like.
Lastly, to improve the performance overall, I flashed a few different kernels. You may want to play with your nook for a while to get comfortable first. When you choose to flash a kernel, you will boot into recovery (this brings up the Clockwork Recovery program), and pick the zip file that you download to your sd card. My recommendation is to start with the 900mHz kernel first. Make sure your nc is stable, then try some of the faster ones.
As far as MD5s, I have not ever checked after downloading, and have not had any problems as a result. It is something I need to investigate further and start doing.
Hope this helps. I do agree with superkevx above. Browse and search and experiment. It is very unlikely that you will do any permanent damage to your nook, although it is possible. Everyone needs to have at least one bricked device along the way. I have learned more by rendering my devices inoperable and then figuring out how to get them back again. You know you're doing it right if your palms are a little sweaty as you wait for your device to reboot.
you guys have been great , thank you
I'm new to Android and tablets and have never had a smart phone. However, I am in the computer field and am relatively technical. At the very least, I'm intelligent and can follow clear directions.
Where I'm running into trouble is that, because this is all so new to me, I'm lost when reading a lot of these forums, because I have no idea what all these terms mean or what things are.
Here's where I'm at with my Nook Color. Got it a week ago, rooted it with AutoNooter 3.0, got ADB working (finally) over USB. YouTube works. Can get my email. Using Launcher Pro and Dolphin HD. That's about it.
I'm unclear about a few things, and I realize they're pretty basic. But I've searched and searched and can't find clear answers. Hopefully, someone here can help me:
1. How do I know what version of Android I've got on this thing. Nowhere can I find a place to see the version number. And the AutoNooter 3.0 page didn't tell me what version it installs. 2.2?
2. Does Flash work on this or not? This is related to question 1, because I need to at least know what Android version I'm using before I can even beging to search to figure out whether Flash works with it.
3. What is CM7?
4. I tried installing Flash101.apk with ADB, but get the message: INSTALL_FAILED_OLDER_SDK. Again, I'd like to know what this means, but what I've read says the Flash version is for an newer Android version. So, we're back to... what version of Android is on this thing?
As fas as the rest, does anyone know if there's anything out there that goes over basic terms for those of us completely new to Android and tablets/phones and rooting them? Much of the instructions I read refer to things I've never heard of and, when I try looking up those terms, I just get more terms I've never heard of.
Thanks!
1) You have 2.1 (Eclair)
2) No, you need 2.2. There are several options, including simply running it from an SD card or flashing it to memory (eMMC)
3) CM7 is andrioid 2.3. Good stuff, but still a work in progress.
4) See #2
Thanks very much for responding.
Regarding your answers:
1. Is there a place on the Nook where I can find this?
2. Can you recommend a link to a method for getting this? Is it an upgrade, or would I be completely re-rooting this thing and having to reconfigure everything?
Any suggestions on some basic information for newbies?
Thanks again!
Sorry, I don't think I understand the question. Could you specify what you mean by "this"? Thanks.
Sorry, not sure which question you're referring to.
1. This = The version currently running on it.
2. This = Version 2.2
I can't be certian since I have moved to a CM7 variant, but I think it might be under settings either about or device information.
If you rooted with Autonooter you are on Android 2.1 Eclair. If you are running a froyo rom you are on Android 2.2. If on a CM7 based Rom you are on gingerbread android 2.3
loribuono said:
I'm new to Android and tablets and have never had a smart phone. However, I am in the computer field and am relatively technical. At the very least, I'm intelligent and can follow clear directions.
Where I'm running into trouble is that, because this is all so new to me, I'm lost when reading a lot of these forums, because I have no idea what all these terms mean or what things are.
Here's where I'm at with my Nook Color. Got it a week ago, rooted it with AutoNooter 3.0, got ADB working (finally) over USB. YouTube works. Can get my email. Using Launcher Pro and Dolphin HD. That's about it.
I'm unclear about a few things, and I realize they're pretty basic. But I've searched and searched and can't find clear answers. Hopefully, someone here can help me:
1. How do I know what version of Android I've got on this thing. Nowhere can I find a place to see the version number. And the AutoNooter 3.0 page didn't tell me what version it installs. 2.2?
2. Does Flash work on this or not? This is related to question 1, because I need to at least know what Android version I'm using before I can even beging to search to figure out whether Flash works with it.
3. What is CM7?
4. I tried installing Flash101.apk with ADB, but get the message: INSTALL_FAILED_OLDER_SDK. Again, I'd like to know what this means, but what I've read says the Flash version is for an newer Android version. So, we're back to... what version of Android is on this thing?
As fas as the rest, does anyone know if there's anything out there that goes over basic terms for those of us completely new to Android and tablets/phones and rooting them? Much of the instructions I read refer to things I've never heard of and, when I try looking up those terms, I just get more terms I've never heard of.
Thanks!
Click to expand...
Click to collapse
CM7 (Cyanogenmod 7) is a custom rom, which is a custom operating system that replaces your current one. If you are not familiar with Android yet or rooting, I would stick with autnooter for now. Phiremod beta 2 is a stable custom rom with flash, but you need clockwork recovery first to install it.
Yeah, checked those places Wile E, but didn't see it there. Thanks, though.
stelv, would that run off the card or internally? If it runs off the card, I could try it out without messing up what I've already got, right?
loribuono said:
stelv, would that run off the card or internally? If it runs off the card, I could try it out without messing up what I've already got, right?
Click to expand...
Click to collapse
Most custom rom installs (phiremod) would erase what you have now completely. You would have to redownload programs and use the nook color app from market for books. You could use titanium backup to backup and restore apps. There is a thread here and on androidtablets.net for phiremod beta 2.
But there may be a version of froyo that runs off sdcard but I am not sure how stable that is. If you are running froyo from an sdcard and mess with the nook internally, it may mess your nook up when you remove the card and try to go back to your old setup.
The good thing with the beta 2 version of phiremod is that you can restore a previous version of the nook from the clockwork recovery menu if you have cwr installed. That is if you make a backup first through cwr on your autonooter version of nook.
If you decide to go the route of a custom rom I would check out the how to on androidtablets.net about clockworkmod recovery first.
sent from my rooted nook color
Thanks for all the info. When you say "custom roms," are you referring to any rooting of your Nook Color? Is the version of Android I have after running the AutoNooter 3.0 considered a custom rom? Or did I just merely strip off some of the "skin" Barnes & Noble has on there, 'cause it didn't seem very much like I'd started over, but more like I "got past" something that was already on there and, therefore, opened up more functionality. Does that make any sense? I'm getting the feeling that Nookie Froyo and CM7 completely wipe your Nook and give you a fresh OS. Yes?
loribuono said:
Thanks for all the info. When you say "custom roms," are you referring to any rooting of your Nook Color? Is the version of Android I have after running the AutoNooter 3.0 considered a custom rom? Or did I just merely strip off some of the "skin" Barnes & Noble has on there, 'cause it didn't seem very much like I'd started over, but more like I "got past" something that was already on there and, therefore, opened up more functionality. Does that make any sense? I'm getting the feeling that Nookie Froyo and CM7 completely wipe your Nook and give you a fresh OS. Yes?
Click to expand...
Click to collapse
Ok here is another long book by me, sorry for the long posts
Yes, Nookie Froyo, CM7, Phiremod give you an entirely new OS.
Custom roms are not any rooting. They are entirely different android operating systems so to speak. Most require one to wipe the devices internal Rom (Read Only Memory) in order to put a new one on. This is sort of risky as it erases everything, but is made less risky by using stable custom roms in combo with clockwork recovery. If the internal memory gets messed up and the procedures for instaling a custom rom are not followed or an error happens, your device will be unusable until fixed (fixed usually by booting CWR off sdcard and installing a stock image). Please do research and ask around XDA or androidtablets before installing a custom rom to know what the ups and downs of it are.
Also please keep in mind on the Nook certain Roms like CM7 require a different version of CWR and require a workaround to work as of now. It can be kind of tricky to install. Phiremod Beta2 can be installed through normal recovery. Check us out over at http://www.androidtablets.net/forum/nook/ if you want. There are a lot of useful guides over there.
Yes autonooter just opens up functionality
Autonooter is not a custom Rom. It is just the method of rooting or unlocking your android device. Rooting an Android device makes you system administrator of the device. This is so you can do things beyond what B&N lets you do with the device like use the Android market.
This is what I did with my Nook. Autnootered it>installed Clockwork Recovery>Made a backup with Clockwork Recovery>Then Installed Phiremod beta2 through clockwork recovery as per the instructions for that rom
Thanks again for this. I appreciate you taking the time to explain this to a newbie. It's beginning to make much more sense now. For now, I'll stick with what I've got, keep reading and then go from there.
Ugh. Authentication error while reading a book and then a reset, and I'm back to the beginning. Except worse, because even navigation while reading a book doesn't work right. Anyone experience this?
Sorry I don't have that issues so I am not sure. Maybe its a password issue?
Perhaps. Don't know. Starting over from scratch. All I know is that it happened when I was merely reading a book, about ten minutes after trying to login to Google Talk with a different Google account than the one I used during the AutoNooter process.
Who knows...
I have been lurking and reading for a couple of weeks now. I bought a used NC with 1.1 and used Autonooter to root it. Works great.
I bought a second NC which had the 1.2 s/w on it. I used the manualnooter process to root it. That works pretty well.
Now I'm thinking about getting into the nightly CM7 game. I'm wondering is there anything I need to watch out for with the 2 NC's I have if I do this. Do I have to take them back to stock? Can I just follow the CM7 instructions?
Any insight and guidance would be appreciated
50 views and no replies. If you read this and can help I would really appreciate some info. I'm reluctant to proceed until I hear from someone who has traveled the road before. Thanks
You can run CM7, stable or nightly, off of an SD card. You don't have to change anything on your Nooks to do this. In fact, they don't even need to be rooted. Running CM7 on the SD card will not change anything on the built-in memory of the Nook.
Look for the "size agnostic" thread, follow the directions, and you're good to go.
ps. I enjoy your music.
yeah, just follow the instructions on flashing cm7 for the first time. and make sure you understand the CWM instructions. you may want to try a stable rom for now. there are lots of battery and kernel issues right now with the nightly builds. but not to fear the devs are working hard to fix them. just stay with the stable's and your be fine. I hope this was helpful...
boxcar8028 said:
yeah, just follow the instructions on flashing cm7 for the first time. and make sure you understand the CWM instructions. you may want to try a stable rom for now. there are lots of battery and kernel issues right now with the nightly builds. but not to fear the devs are working hard to fix them. just stay with the stable's and your be fine. I hope this was helpful...
Click to expand...
Click to collapse
is this the one you mean?
http://forum.xda-developers.com/showpost.php?p=11452450&postcount=19
Well, I went ahead figuring "How hard could it be anyway?".
I did the nand backup with CWM 3.0.2.8
I then ran ROM manager V4.2.0.2 from internal memory.
I choose the option that allows me to download ROMS.
I chose CyanogenMod, and then chose 7.0.3.
I downloaded the ROM
I then chose Install ROM from SD card
It asked me about clearing caches, etc and I chose the default values already checked.
It installed without errors.
I rebooted and it got to the last part of the boot process where the word "color" is rapidly changing and stayed there indefinitely,
I rebooted with CWM on the SD card and tried to reinstall the Manualnooter I loaded on this NC a week ago.
Rebooted. Still hung up.
I copied my nand backup to the CWN SD card and chose restore.
It booted back to my manualnooter install successfully.
So I'm successfully back where I started.
Can someone help me understand what I did wrong on what I need to do to make it work? Thanks
Not sure what went wrong, but I would also suggest trying verygreen's size-agnostic approach. You keep your manual nooter and can run CM7 from an SD card to see if you want to go all the way and remove the stock BN software.
Try this thread:
http://forum.xda-developers.com/showthread.php?t=1000957
Or, if you want to go crazy, you could try racks' dual boot SD card image of Phiremod 6.2 (a variation of CM7) and Honeycomb. That's what I'm using and Phiremod works great (aside from battery life ) and honeycomb is just plain slick to use.
http://forum.xda-developers.com/showthread.php?t=1045018
I loaded CM7 7.0.2 stable and was able to get it going. Thanks
Hi. I've been reading and reading over the last 6 weeks since I decided to install Android on my TP. I try to avoid posting unless absolutely necessary. I'm going to start with CM9 I think and if I want something a little smoother, I'll upgrade to CM10. My TP is currently at stock. I've read and reread countless tutorials and threads but I am trying to make sure I have the most up to date tutorial and one that doesn't expect I did something else beforehand (like preware installation, or a webos backup). Also, I'd like to install the dual boot option so I can still have Webos on my device. I haven't seen much on that in recent tutorials. I'd like to use the CM9 install instructions linked to on the sticky but it doesn't mention things like preware and CWM... which I read about in earlier tutorials. What do I need to do before the instructions on this page: http://forum.xda-developers.com/showthread.php?t=1452625 ? Thanks so much, I really appreciate it!
lots_to_learn said:
Hi. I've been reading and reading over the last 6 weeks since I decided to install Android on my TP. I try to avoid posting unless absolutely necessary. I'm going to start with CM9 I think and if I want something a little smoother, I'll upgrade to CM10. My TP is currently at stock. I've read and reread countless tutorials and threads but I am trying to make sure I have the most up to date tutorial and one that doesn't expect I did something else beforehand (like preware installation, or a webos backup). Also, I'd like to install the dual boot option so I can still have Webos on my device. I haven't seen much on that in recent tutorials. I'd like to use the CM9 install instructions linked to on the sticky but it doesn't mention things like preware and CWM... which I read about in earlier tutorials. What do I need to do before the instructions on this page: http://forum.xda-developers.com/showthread.php?t=1452625 ? Thanks so much, I really appreciate it!
Click to expand...
Click to collapse
I'll start off by saying you're making the right choice throwing android on it and reading carefully before you do so. You'll most definitely need to install the novacom drivers on your computer before you try any of this. (I would include links, however I'm on my tablet, if you need any, just ask.) After that point, you'll need to download the ACMEinstaller (putting in the palm inc directory is optional, but recommended) For the most part, you should just be able to place the CM files onto the storage of your touchpad in the cminstall folder and from that point you can follow the instructions on the thread
As for keeping webOS, no need to worry about that. All installs of android that I know of simply add on the android, never replacing the webOS. You'll be installing moboot (essentially an OS chooser) that will allow you to pick which one you want on booting. It also allows you access to recovery. Very useful.
Also, I would honestly say to go ahead and install CM10. I'm staying off of CM10.1 for now ( <3 Bluetooth) but I would argue that the minor cons of CM10 outweigh the stability of CM9. Jcsullin's (If you haven't seen his name enough yet. One of the major players in the Touchpad development community) CM10 from April 18th is what I'm using now and aside from the stray reboot, I would go as far to say that it is as stable as WebOS. According to the build page the main issues on that right now is no flash video in browser (youtube app works fine) and battery drain is a little higher than webos but lasts about 2 days with steady use.
The install thread for that is here (I went through the extra effort to put the link in, that's how much I feel it's worth going to CM10)
http://forum.xda-developers.com/showthread.php?p=37965549
Just noticed from pasting this in that they also need you to install Java if you haven't yet. That guide and youtube video is MUCH more comprehensive than the guide you linked. I would at least follow that until you get to what files to add. There is no difference in installing CM9 or CM10 besides the files you place in the CMinstall folder.
If you have questions, fire away, otherwise good luck on your adventure.
Sent from my HP Touchpad using xda app-developers app
One more thing, use acmeinstaller3, it gives you the room necessary for cm10 and cm10.1.
Good luck.
Also this is an option as well. I'm sure it works, but it might take away the fun of the process.
http://forum.xda-developers.com/showthread.php?t=2158341
Sent from my cm_tenderloin using xda app-developers app
My guide which is posted above (and in my signature) works from scratch and doesn't need you to have done anything in advance and works with CM9 or CM10. Personally I'd not bother with CM9 at this stage and would go straight to JCSullins CM10, I've used it for months with no problems at all, much smoother than CM9.