Hi,
So im having a peculiar problem. I have been running Ultimate ROM V5.1 on my galaxy note GT n7000.
I am not able to change to any other rom from this
While flashing the ROM through CWM, it encounters and error after opening the package and then the installation aborts.
I have tried the following roms
Cyanogen mod (stable release)
Stunner android ver 4.2.2
i have tried re-flashing, full wipe and factory reset. Still getting the same error.
Am i doing something wrong? Please advise.
Thanks
Yes i have faced this problem, flash a non PhilZ kernel with a non PhilZ recovery and then go to recovery (like hydracore kernel) and flash. The PhilZ custom recovery causes some problems for certain ROMs.
Related
hi, im new to in android. currently I rooted my phone with zergrush+CWM v3.0 installed. my question is, should i install [ROM] 2.3.6 Deodexed STOCK XXKL3/Modem DDKL1 - MultiCSC - Rooted (CF-Root-KL3, CWM5) before flash to Rocket Rom v9-KL3? I tried several tricks like FULL wipe before install the zip file in CWM recovery & also did FULL wipe after install the rom. but I still getting a bootloop.
hi there, can someone guide me how to install criskelo ics 10.1 rom, i use to flash rocketrom before, so i think i got some skill on flashing custom rom...but itried to flash criskelo 9.1 last week n the result my note got hard brick, cant turn to download mode or recovery mode... luckily, i still got waranty on my note and sent it to SS n get new board as replacement...so can some one guide me the safest way to flash this rom...now im on stock ics 4.0.3 rom n rooted...
CRISKELO IS A VERY GOOD ROM BUT TRY WAIT A LITLE MORE TIME GET BETTER IN HIS VERSION ICS BECAUSE I AND A LOT OF PEOPLE HAVE A LOT OF PROBLEMS , THE SAME WAY YOU INSTALL ROKET YOU INSTALL CRISKELO,
BUT IF YOU WANT TO CONTINUE THIS IS THE STEPS
FROM THE ORIGINAL GB
ROOT YOUR PHONE WHIT CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5
THEN INSTALL ABISS KERNEL REDPILL GO TO ADVANCE AND REBOOT RECOVERY
WIPE DATA, CACHE,DAVLICK CACHE
AND INSTALL THE CRISKELO ROM
BUT TO ME IN THIS WAY THE ROM CONTINUE TO GIVE ME PROBLEMS:
SUPERSU ASKING FOR PERMISS FOR ALL APPS
BATTERY PERCENT NOT SHOW CORECTLY
IN THE OTHER HAND CRISKELO VERSION 7 IS A ROM WHITOUT ANY PROBLEM VERY RECOMMNDED:good:
so which rom is best for now
If I were you, I would:
1. Download abyss kernel (this is a gb kernel so it should be safe)
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
2. Install abyss from cwm (don't do any wipes)
3. Still in cwm, go to advance and reboot cwm
4. Do the three wipes (cahe, dalvik and factory)
5. Install criskelo's rom
It should be done.
That's how I installed,
I'm using criskelo's rom with glnotecore kernel and everything works fine.
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
<< 12.05.2013 - PhilZ-cwm6 v5.03.0 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop)
Click to expand...
Click to collapse
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
ajay0ajay0 said:
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
Click to expand...
Click to collapse
I faced a similar problem yesterday.
First of all go back to CWM, wipe cache and dalvik, then go to mounts and storage and mount system, sd card, preload, cache, sd-ext, don't touch emmc.
After that go to ADVANCED and fix permissions. Then wipe cache and dalvik again.
It worked for me.
Let me know the results.
ajay0ajay0 said:
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
Click to expand...
Click to collapse
You are flashing a JB kernel on an ICS rom. That is why you get stuck. What you can actually do is the following:
- Put PA in your sdcard (internal or external)
- Reflash Philz Kernel and go to advance and reboot recovery (not device)
- From that touch recovery flash PA and GAPPS.
If not, find Philz file for your build version and everything will be just fine.
yes you're flashing jb kernel on ics. please read the instructions on the kernel thread before you flash it.
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
shyam9876 said:
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
Click to expand...
Click to collapse
Hi,
Try reverting back to CWM 5. As far as i know, CWM 6 was made only with the intention of flashing Android 4.4 Kit Kat builds. Do post your result. You can find the CWM 5 link below. Hope I helped
CWM 5.0.2.6 fix for Galaxy Ace S5830
I had installed LiquidSmooth ROM on my Samsung Galaxy Note GTN7000 a while ago. I run Philz Touch recovery version 6.0.0.1 .
When I tried flashing CM11 , I got an error something like set_metadata_recursive .. .
I googled it up, and found that I need to update my recovery. SO, i downloaded the latest version of CWM from their website and tried flashing it through the recovery. And it is resulting in a sudden shut down and then in a bootloop when switching on .
What wrong am I doing? How can I rectify this?
Flash Raw Kernek r5:
http://forum.xda-developers.com/showthread.php?t=2397000
On our device the recovery is incorporated into the kernel, never flash a recovery or kernel that isn't meant for our device.
Once you have flashed that, reboot to recovery and perform a full wipe. Then proceed with the installation of CM.