Related
Hello, I have unlocked Bootloader today and then tried to flash kernel and it failed and when I try I boot up the phone it won't boot! It just stays in black screen and vibrates when you turn it on. Won't even load to the Sony Ericsson screen ;(. Please help. Need the phone before 14th July. Thanks
http://filecrop.com/search.php?w=X8..._f=100000000&engine_r=1&engine_h=1&engine_m=1
Go to here download the first one (219mb) place it in your firmwares folder (where you place kernels) > run x10mini flasher> select flash > select the file > and flash and it's automatically clicked on 'loader.sin' doesn't matter if it's either kernel.sin or w/e it will flash both anyway but just have it on loader.sin lol.
Have your x8 turned of. Connect the usb to the android but don't connect the other end to the computer just yet. Once it's connected to the android and make sure it's turned off beforehand, connect the other end to the pc. Hopefully it should display the green LED light when you just connect it. Hit and hold the back button once you see the LED and connect the usb into the computer. DO NOT LET GO OF THE BACK BUTTON. and wait until it says 'connect in usb debugging mode' and make sure it reads 'flashing finished' before that. After that take of the usb of both ends. power on the device and your device is brand new lol.
I also assume that it's impossible for a kernel to fail installation unless:
you didn't hold the back button down or you let go in the process.
You flashed the wrong kernel E.g. GDX and flashing naa ICS kernel (which is unlikely just an example) cause the KERNEl is only made for ICS and therefore they don't go together so ~
And also for some custom roms you must have it completed in a all in one process. That means you flash the kernel and straight away boot in CWM and flash the rom and install and wipe anything else bla bla bla. But if it is NOT a all in one process then u can just flash the kernel then flash the rom 1 by 1. Read the instructions carefully on the rom and the kernel that's required to flash to use the rom. E.g. ICS rom by nAa which is minicm9 u have to flash kernel then boot into cwm then flash rom. It says that in both articles but this mistake happened to me in the past when I forgot to put the rom in the sd card so I had to contact one of my mental cheap 'friends' lol. Hopefully this works out for you if you need any help just say. And try and provide me with some more detail if all else doesn't work. I'll try my best to answer your query. Remember if you flash that EVERYTHING is gone so it's better than nothing and I also like it when you get to start anew =D.
I also found the quickest and easiest way to get the rom kernel rooted and everything all in one guide I can write up for you once your finished. Let's just get you out of this situation first
That is brick phone..
Yeah just flash stock kernel with flashtool.
And don't forget if you want upgrade, your baseband must 015
and do not flash wrong kernel...must compatible with your rom..
Sent from my E15i using xda app-developers app
Hello, Thanks for the Reply. But the Flasher doesn't detect the firmware you gave me? :O
Did u put the ftf file in flashtool's folder as required... u can even search on google for stock rom ftf file of x8/w8 it's easily available..
Sent from my X8 using xda premium
Yes, I put it in the Firmware folder. I downloaded some random stock '.ftf' yesterday and they don't fix the phone
OMG! I Just figured out what I did wrong! I didn't hold the back button during the Flashing! Not I have the Sony Erricson screen and it boots up! woahhh! . Love you guys xD
Here you go..
http://sony-w8.blogspot.com/2012/05/release200412-flashable-file-for-w8e16i.html?m=1
Sent from my X8 using xda premium
LOLz!
just relax dude!
downgrading using flash tool is easier,,
but dont forget to hold the back button dude! while you plug the usb cable to your phone
hello, Can you guys tell me which kernel version is safe to flash on my x8?? Bricked my device once before so i dont wanna risk it again. im currently running on gingerdx (i dont know which CM version is that rom.). i have downloaded nAa 07. but i dont know whether its safe or not,. Any help would be much appreciated..
Gingerdx works only on alfs kernel for gdx not even alfs for cm7 you can use alfs gdx V09a but if u have hitachi drivers for lcd you might have some screen cuts, even though works fine for me you can try it or else V08.. don't forget flash addon for V08 and update rom for V09a after flashing kernel and rom..
Read all the instruction on gdx and alfs kernel thread you get to know everything required..
Sent by the walking walkman..
Try to change to stock kernel, maybe your rom don't support for that kernel...................or find a rom that support your flashed kernel, then flash the rom via flashtool
Depends on which GDX you're using. You have unlocked the bootloader? If so, use alfs kernel its on the rom's post -.-
diabolicalprophecy said:
hello, Can you guys tell me which kernel version is safe to flash on my x8?? Bricked my device once before so i dont wanna risk it again. im currently running on gingerdx (i dont know which CM version is that rom.). i have downloaded nAa 07. but i dont know whether its safe or not,. Any help would be much appreciated..
Click to expand...
Click to collapse
as far as I know
miniCM7 - nAa
GigerDX - alfs
ow yeah!!
dont forget to always check updated kernel and ROM
had screen cut issues on alfs v9a, although worked fine for most of the games, i had to restart my phone to get rid of it. V8 was too laggy and didnt supported my rom very well. Had to switch to nAa 13 and DixinOS but its not smooth as alfsv9a. I will just have to wait for the bugs to be fixed. No option. Thanks dude,.
---------- Post added at 10:59 PM ---------- Previous post was at 10:53 PM ----------
yup i have unlocked bootloader.
BlackRabbit1703 said:
LOLz!
just relax dude!
downgrading using flash tool is easier,,
but dont forget to hold the back button dude! while you plug the usb cable to your phone
Click to expand...
Click to collapse
mate I have bricked my phone and I need it every kernal I try it doesn't work :L
Did you wipe dalvik chace?
Sent from my LG-P350 using xda app-developers app
killa_ninja58 said:
mate I have bricked my phone and I need it every kernal I try it doesn't work :L
Click to expand...
Click to collapse
Bootloader unlocked?
Sent from my X8 using xda app-developers app
eddrowe said:
Bootloader unlocked?
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
how can i enable usb debugging ...... my usb debugging is off and i cant boot to enable it -_- any advice?
classmate_Jp said:
how can i enable usb debugging ...... my usb debugging is off and i cant boot to enable it -_- any advice?
Click to expand...
Click to collapse
Settings >applications > development
Duh.
Sent from my E15i using Tapatalk 2
i have a little problem, today a flashed again cm7 for stock, then i got a bootloop, the device turned on and restarted automatically, that happened before and i got past it, but the problem now is when i try to flash back to stock, i connect my device in flashmode and then it starts up after some time, and it doesnt complete the flashing process, do anyone knows what is wrong? o what am i doing wrong?
what do you use for flashing?
flashtool
flash back to stock using SEUS, then to flash the CM7 try to flash the compatible kernel first with flashtool, then flash the ROM with CWM
hey bro......can u plz post the log...........
Steven87 said:
i have a little problem, today a flashed again cm7 for stock, then i got a bootloop, the device turned on and restarted automatically, that happened before and i got past it, but the problem now is when i try to flash back to stock, i connect my device in flashmode and then it starts up after some time, and it doesnt complete the flashing process, do anyone knows what is wrong? o what am i doing wrong?
Click to expand...
Click to collapse
so, before u got this prob, u can flash another kernel?
ehhmm..
use PCC or SEUS first
if its still not working flash this file to back into 2.1 X8 E15i 2.1.1.C.0.0._un.ftf
make sure your drivers was installed correctly and your cable when plugging to your phone
Solved, flashtool always Was my saviour but not this time, somehow the drivers messed up and pc companion did the trick
Sent from my E15i using xda premium
I NEED HELP!
I've recently updated GingerDX from v28 to v29 using CWM. Once updated, I rebooted and now I'm stuck at the 'Sony Ericsson' screen. Nothing happens. Tried everything, but now the phone doesn't go past that screen. I can't even boot with CWM to apply any restore (I did a backup before installing new version of Gdx).
Please, anyone could tell me what to do? How do you boot the phone with CWM after turning the phone on? Is there any way to go past the 'Sony Ericsson' screen? Will I need to fully restore my phone to its original OS or anything?
(and most important... is this 'hardbricking' the phone?)
Thanks in advance!
It's just softbrick. Use PC Companion or Flashtool to install stock ROM, then root, install recovery etc.
repeatedly tap the screen at boot to access CWM. If you can get into there try to reflash rom, full wipe etc.
If you cant get into CWM you have a soft brick and you need to repair with PCC - re-root - re-flash etc..
Thank you for responding so fast.
I've tried tapping repeteadly the screen when turning on, but doesn't seems to work ('Sony Ericsson' screen is not moving anywhere).
And also I've installed PC Companion to do a factory reset, but this won't work either because it's asking me to turn on USB storage to connect to the phone, and since I can't get past the 'Sony Ericcson' screen there's nothing I can do.
Any ideas? I'm starting to freak out a little bit.
Thank you again.
Turn off your phone (by taking out the battery). Open PCC. Open support zone. Choose Update phone. It will shoe you a window, select repair.
Here you have some screens, it's in czech but you should know where to click.
My bad. I wasn't entering 'Support Zone'. It's done, the phone is restored to its awful Eclair system.
Since I'm doing all the process again (rooting, then changing baseband, then CWM, then installing GDX)... I'd like to start clean. Is it safe to format the SD Card? Besides losing pictures and stuff, am I running any other risk?
That should do it. Thank you guys again! I was unhopeful for a moment!
(still... what a waste of time doing all this again... but hey, the price you pay for using roms)
yer_blues said:
My bad. I wasn't entering 'Support Zone'. It's done, the phone is restored to its awful Eclair system.
Since I'm doing all the process again (rooting, then changing baseband, then CWM, then installing GDX)... I'd like to start clean. Is it safe to format the SD Card? Besides losing pictures and stuff, am I running any other risk?
That should do it. Thank you guys again! I was unhopeful for a moment!
(still... what a waste of time doing all this again... but hey, the price you pay for using roms)
Click to expand...
Click to collapse
It is safe to format your SD card. Just backup your photos, music etc. to PC and format it. Then copy your stuff back to SD card.
OK NOW I'M REALLY UPSET!!!
I've done it all again:
1) rooted phone with SuperOneClick v1.9.1
2) installed 'xrecovery mini 0.1 beta' (copying the 3 files inside the .zip on the system > bin folder)
3) changed baseband from 006 to 015 using FlashTool
4) installed 'clockworkmod 3.2.0.0 r3 x10 mini Amend' using xrecovery
5) finally installed 'ginger dx v0.29' using clockworkmod
Now the Sony Ericsson screen again. Again, nothing. The phone is not booting. What am I doing wrong? Is any of those steps wrong?
I think I should stick to Gdx v028... if works... now I'm confused.
be sure you have installed the right rom for stucks and addons.and read for the fix.
You are missing the most important part...full wipe/factory reset before installing
Sent from my X8 using xda premium
v029 is buggy for me after fullwipe too so try staying on 28 maybe or make sure the one you install is for your kernel
Sent from my crap using xda app
I think I found what might be the problem:
In the GingerDX thread there are 2 .zips available for download:
.one that says 'Alfs/nAa'
.and one that says 'stock'
I don't even know what 'Alfs' or 'nAa' are, but I believe this version isn't suitable for my phone... anyone can check this? So I downloaded the 'stock' version, now I'm gonna try with this one.
I don't know anything about kernels and stuff... I've always flashed the ROM only... and it worked fine. Now I'm reading all this notes about kernels and Alfs and I don't even know what they are... but I'm starting to believe this has something to do with my phone softbricking.
yer_blues said:
I think I found what might be the problem:
In the GingerDX thread there are 2 .zips available for download:
.one that says 'Alfs/nAa'
.and one that says 'stock'
I don't even know what 'Alfs' or 'nAa' are, but I believe this version isn't suitable for my phone... anyone can check this? So I downloaded the 'stock' version, now I'm gonna try with this one.
I don't know anything about kernels and stuff... I've always flashed the ROM only... and it worked fine. Now I'm reading all this notes about kernels and Alfs and I don't even know what they are... but I'm starting to believe this has something to do with my phone softbricking.
Click to expand...
Click to collapse
if you have locked bootloader you have to flash stock version of ROMS.:good:
try downloading and replacing the ROM
Solved!
I've installed the 'stock' version of the ROM (GingerDX v029) and now it's working fine.
What did you mean with locking bootloader?
Hello. This is my final resort. -.-
I used miniCM7-2.2.1. I've tried everything that has been suggested. My X8 hangs up on the Sony Ericsson logo and I cant access the xRecovery menu. To shut my phone down, I have to take out the battery, since it wont shut down when it hangs up no matter how long I hold the power button. Then I insert the battery again; but when I connect the USB cord, it starts up automatically and then hangs up again. I've tried flashing it but it wont detect in flash mode even if the led is green. so no luck on flashing. I tried SEUS but it says I already have the latest software installed so no luck in updating either. Somebody help! T.T
SUMMARY:
-Hangs up on logo screen
-Cant access xRecovery
-Doesnt detect flash mode (even when led is green)
-SEUS cant upgrade since latest software is installed
PLEASE HELP!
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
cascabel said:
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
Did you installed gordon gate drivers in drivers folder of flashtool?
Sent from my GT-S5360 using Tapatalk 2
vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
only seus, pcc,or flashtool.. since you can't get into recovery.
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Dear bro,don't PANIC! its the only thing that makes us to create a bit useless threads..
try with Flashtool second time!
and if doesn't work use PC COMPANION its your best Companion
repair the X8 via PC COMPANION
- Turn off the phone, and unplug it from the PC !
- On your PC, uninstall Sony PC Companion
- Restart your PC
- On your PC, clean any Cache and Registry related to Sony PC Companion, then restart PC again.
- Reinstall Sony PC Companion by downloading it from here
- Turn on Sony PC Companion on your PC
- In Sony PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall Sony PC Companion AGAIN, and start the above described process AGAIN. It WILL eventually work!
vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
x8bricked said:
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
Click to expand...
Click to collapse
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
cascabel said:
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
x8bricked said:
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
Click to expand...
Click to collapse
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
no its unlocked i checked twicw again its unlocked using msm7227 it shows 'r'
Well, I can tell you that I had a similar experience recently and I almost **** my pants. After having occupied the restroom, PCC worked for me absolutely perfectly, albeit I did have some problems installing the necessary drivers (had to do it from a different machine, obviously something in the registry was messed up).
Seeing you solved the problem, I recommend you install either a 2.2 or 2.3 ROM. Don't go for 4.x ones if you're up for normal use because they are way too strong for this little device (kudos to the developers who made these ROMs happen, though).
My recommendations:
2.2 - FroyoPro v2.5
2.3 - GingerDX v031b
Both work really well with custom kernels, and are very fast and stable.
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
OK,assuming you have probably root the phone, by the way can you managed to go into recovery mode in your phone? If so, then just copy your rom zip files into the SD card and install zip files from SD card in the recovery mode. By the which Rom and Recovery you are using?
Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
you use flashtool to unbrick your phone? if you use it and can't flash your phone, you have to install flashtool-drivers.exe in drivers folder. everything'll work well.good luck
Hi everyone
After a lot of reading i decided to install a ROM. Now i was able to try to but none of them worked, so i ve been trying now for 3 days. I think i did it all as stated in this forums, it launched but never go to really open the OS, used to get stuck at the motorola or nexus logos or what ever logo from the different ROMs i downloaded.
I was able to go back to the original ROM but today im not being able to do so...
What can i do? Im at recovery and im able to restore boot but at system it says:Error while restoring /system!
I had it backedup at pc so i have also removed the one at sd card and tried with the one from PC.
What can i do (that doesnt involve getting another phone)
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
mm166 said:
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
Click to expand...
Click to collapse
Attempting in 3..2..1..................
It doesnt let me use decompress and flash... im decompressing and will see if there is an option to flash after that...
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
MrPersonality said:
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
Click to expand...
Click to collapse
Boot the phone into bootloader/fastboot?
You have an unlocked bootloader and custom recovery installed? I assume you have both since you were trying to install custom ROMs.
I have tried to the fastboot... im trying AP fastboot and theres where i am stuck right now.
Yes custome recovery and unlocked bootloader there. I had the phone moved to another couple of roms but the never loaded correctly so i went back to my original ROM, i tried a few other ROMs and none worked so this time i try to go back but it doesnt come back anymore... :laugh:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
kingatmos said:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
Click to expand...
Click to collapse
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
MrPersonality said:
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
Click to expand...
Click to collapse
1. Read the Myth Tools OP
2. Download Myth Tools
3. Download Philz CWM
4. Download a stock fastboot
5. Place the fastboot zip and the extracted recovery/cwm.img in their respected folders
6. Run Myth's executable and follow the instructions
7. If that doesn't work then read the faqs here and in the RAZR HD forums, all your questions have been answered already.
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
MrPersonality said:
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
Click to expand...
Click to collapse
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Again, my main issue device not detected by pc... so i cant download drivers using automatic tools that detects the phone because again phone is not detected and mythtools goes straight to the motorola device manager which needs a phone connected to act... so in a very bad circle i am... and i would try to use someone else phone but here in Costa Rica i know of noone else with a Motorola phone... everyone thinks it no longer exists... and i havent found a way to download the specific drivers for my specific device in a way it doesnt require to be connected.
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
kingatmos said:
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
Nice i managed to flash the philztouch recovery... the damn phone doesn't want to accept any ROM... keeps aborting them. So far thanks a lot... ill read like crazy today again and ill ask for help if failure salutes me again!
:highfive:
If you made a backup of your stock after rooting try flashing that and then hooking your phone up to your pc
Sent from my MB886 using Tapatalk
It finally works
It works... i think somehow the recovery stopped working at some point... now with Philz phone was recognized by pc and i was able to use Myth tools to do the job. I think this will be my last Motorola...
Things to highlight:
1 i did read a lot before doing anything, still somehow screwed up, did read lots before asking here, still needed to ask... got answers, still needed to ask more... it was fun as everyone at work said: " its bricked fool buy a new one and stop playing to be good at something" but hell yeah its fixed!
2 i will try again to install another rom, i wont give up damn it!
3 i might begin with my wife Note 1, its old so its ok to brick it ha ha ha
4 damn it guys you are cool... wish i were 10% of you guys!
5 I think instead of all those different options out there we should recommend only to use the myth tools, its a complete package and its easy to use even with examples for newbies like me.
Again thanks and questions on friday after i brick it again e he he he...
The other stuff is there so you can understand what the automated stuff is actually doing.
Sent from my MB886 using Tapatalk
Ok so i have started the process again. I cant tell what i am doing wrong. I have flashed 2 different roms and none worked... its like im missing something.
I root the device, unlock bootloader... set the recovery with cwm... flash the rom... and it goes to moto logo and then black screen... am i missing something?
I did the exact same for the stock rom and it did work... also i did it all exactly the same using now myth tools... so any ideas? Should i leave the phone alone because its just simply not going to work or am i missing anything?