Hi there!
I have a archos 80 g9 trubo hdd and I could have not do the hdd +flashing tutorial for dynamic multiboot.
I have 4.0.4 ics with update .28 rooted as stock rooted.
I've tried whole tutorials here at xda.
How can I do the right way the procedures to have several roms on hdd?
Anyone could help me.
I have sde official.
Thanks a lot!
Yesterday i've built an ubuntu touch preview but the issue was stucked on archos 80 gen9 boot animation.
Sent from my L9000 using xda app-developers app
Related
hi there
i have a couple of questions about kernal modules
is it possible to use other kernal modules from different devices on a gnote ?
e.x if i use Samsung Epic 4G's kernal modules, will it work on my Galaxy nte?
if i change the kernal of a rom, will it still work on my Gnote or any different device?
e.x if i change the ics stunner kernal by copying the abyssnote's in stunner pacakge, will it work on my Gnote? or is it omg no way this is binary language and development part?
[dev-part]
I want to understand how the android gigerbread and ics os hardware and software works logically and physically .,.,but how ?
e.x the drivers the boot files the ui everything .,.,what source that you suggest me ?
is it possible to take drivers or system files from linux and re write it then you use it at my gnote ?
thanks to everyone in xda ,,.btw you inspired me big time ^_^
Hi, just found at my wife's huawei u9000 restarting sometimes.
Want to flash with newest stable rom, maybe after when i understand better this proces something modified/custom
Model: HUAWEI-U9000
Android 2.2.2
Radio PR232
Kernel: Apps_2.6.32.9-perf
When i try this rom: http://forum.xda-developers.com/showthread.php?t=1274063 it gives me wrong PID ???!!!
My last flashing was with HTC diamond, and it wasn't so complicated like android. So just need help.
SUT is software updating tool that i found, can't just put nb0 file on sd card?
What is CWM ? Need root ? (what does it mean)
I know is different .32 and .35
Best if i get stable android 4.04 .35 Just give me ritght directions to doing it guys
CWM is an recovery used to install an custom rom
you want to get an custom rom right?
and also the .nbo file should be on the root of sd and installed from bootloader
Sent from my WT19i using xda app-developers app
So i should find CWM for my rom ?
Kernel: Apps_2.6.32.9-perf
Android 2.2.2
Best if i cen get 4.0.4 with all working inside
find CM9 for your device and install via CWM for your phone
Sent from my WT19i using xda app-developers app
Just installed http://forum.xda-developers.com/showthread.php?t=1278027
and starting with CM9 RC2...
Stop, but i think i should go from .32 to .35 first, so how can i make this now.
1. I have installed CWM recovery v5.0.2.7 for .32
For changing base kernel.. you need to flash andro-id rc3 via windows sultr file extention is .nb0.. and you also got CWM .35 base automaticaly included..
And than you can flash the other custom rom for .35 base kernel..
Sent from my FIH-FB0 using xda app
Enable HDMI port
Hi guys,
How to enable the HDMI port in our device especially for our custom ICS ROM?...Is there any tools or step that we need to do so that we can use our phone's HDMI?
After flashing to CM9 RC2 everything looks and works awesome, but softkeys are changed/randomized. How can fix this?
FIXED: http://forum.xda-developers.com/showthread.php?t=1715906
Hi when I rooted my tab yesterday i used odin and a flash rom. I also installed a Ice Cream Sandwich Andriod version 4.0 (alpha 3) from this website http://forum.xda-developers.com/showthread.php?t=1322059 by CWM then the wifi did not work.So i restored my earlier version and now it is stuck at the samsung screen. What can I do?
Thanks
This is not q&a forum.
There is one for it.
To answer you, no it is not bricked you can boot to download mode.
You just happen to flash a bad ROM.
Why flash alpha when ICS has been stable for so long.
Do you even know what is alpha stage software?
Sent from my GT-P1000 using xda app-developers app
Sir.. I am facing great problem on my galaxy s i9000 after installing custom roms...I am from Pakistan when do I Install Ice cream sandwich when It starts And after Boot animation ...It says ENCRYPTION UNSUCCESSFUL rest phone..When I reset it..ICS start But again when i shutdown my phone again problem comes ..i have tried many things it does'nt matters to my phone.. Another thing In JELLY BEAN..When I Install JELLY BEAN rom after shutdowning my phone and restart after some Minutes It loop in CMW again and again..I can not do any thing... IS THERE IS ANY PROBLEM WITH MY REGION ..I HAVE ALSO TRIED MANY STOCK ROMS SO ICS AND JB PROBLEM MIGHT BE SET>>BUT IT DOESN'T HELPS ME..I HAVE ALSO HARDBRICKED MY PHONE ONLY ONE TIME..:crying: SOMEONE PLEASE HELP ME...
Sent from my GT-I9000 using xda app-developers app
Her are some postings about the problems (not only for SGS) but i hope it helps you ...
http://forum.cyanogenmod.com/topic/60631-encryption-unsuccessful-bug/
http://forum.xda-developers.com/showthread.php?p=22200724
http://forum.cyanogenmod.com/topic/49006-encryption-unsuccessful-and-boot-loop/
I have figured out thing that it loop in cwm in jb and encryption unsuccessful in ICS because i9000 cannot pick up its internel memory ....when it picks its internel memory it starts normally ...What should be the solution of this problem..
Sent from my GT-I9000 using xda app-developers app
[Q] [i9000] Stuck on boot logo after flashing Bigmem & Semaphore "S" Kernel
Hi folks,
I'm new to xda (but not to tinkering around with Android devices), and I've come across a problem.
I flashed the latest Cyanogenmod nightly, and the Bigmem patch here.
However, upon flashing the Semaphore "S" kernel (for Slim Bean and bigmem patched ROMs, my phone has been stuck at the boot logo. It does not reach the kernel logo even. The three finger salute does not load recovery, and I am at a loss at what to do here.
Any help would be much appreciated.
Hi,
put out the battery for a moment (30sec. - 1 min.) then you should get into CWM-Recovery with the three finger combo :good:
If it doesn`t boot correctly flash again...
First CM 10.2, then Semaphore-Kernel via Odin and least but not last the BigMEM-Libs ...
Vide for flashing Kernel via Odin ...https://www.youtube.com/watch?v=CQVj-tPDOXo
Good Luck...:fingers-crossed::fingers-crossed:
But with CM 10.2 nightly from 20131022 there are some probs with combination Sema-Kernel look here ==> http://forum.xda-developers.com/showthread.php?t=1786220&page=763
The i9000 That Could said:
Hi folks,
I'm new to xda (but not to tinkering around with Android devices), and I've come across a problem.
I flashed the latest Cyanogenmod nightly, and the Bigmem patch here.
However, upon flashing the Semaphore "S" kernel (for Slim Bean and bigmem patched ROMs, my phone has been stuck at the boot logo. It does not reach the kernel logo even. The three finger salute does not load recovery, and I am at a loss at what to do here.
Any help would be much appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=30725734
I've solved the problem if anyone is interested: Downgraded to Gingerbread, upgraded to ICS, then flashed the ROM of my choice.
All instructions and files needed are in the below thread:
http://forum.xda-developers.com/showthread.php?t=1637966
You could always use kernel managing apa like semaphore manager in this case. It's really noob free if you're not comfortable with manual patching or tweaking.
Great :good: are you satisfied with combination CM 10.2 and Sema-Kernel ...
For me it works perfect!
The i9000 That Could said:
I've solved the problem if anyone is interested: Downgraded to Gingerbread, upgraded to ICS, then flashed the ROM of my choice.
All instructions and files needed are in the below thread:
http://forum.xda-developers.com/showthread.php?t=1637966
Click to expand...
Click to collapse
Yes, I do use Semaphore manager exclusively - it is very useful.
Currently on the latest CM nightly + Semaphore 3.3.0s (which has no issues with Hugemem and CM anymote). Loving the extra RAM. Although I do miss Halo.
Sent from my GT-I9000 using xda app-developers app
Great to hear that it works and you`re happy with it...
I will use new nightly and new Sema when i`m back and have my usb-cable and odin :good:
The i9000 That Could said:
Yes, I do use Semaphore manager exclusively - it is very useful.
Currently on the latest CM nightly + Semaphore 3.3.0s (which has no issues with Hugemem and CM anymote). Loving the extra RAM. Although I do miss Halo.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Mod Edit
Thread Closed
ronnie498
Forum Moderator